Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “modeling framework”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36
All sourcesNASA NTRSDOE OSTI
NASA NTRS2021

Towards a holistic sulfate-water-O2 triple oxygen isotope systematics

Triple oxygen isotope (∆^(17)O with δ^(18)O) signals of H2O and O2 found in sulfate of oxidative weathering origin offer promising constraints on modern and ancient weathering, hydrology, atmospheric gas concentrations, and bioproductivity. However, interpretations of the sulfate-water-O2 system rely on assuming fixed oxygen-isotope fractionations between sulfate and water, which, contrastingly, are shown to vary widely in sign and amplitude. Instead, here we anchor sulfate-water-O2 triple oxygen isotope systematics on the homogeneous composition of atmospheric O2 with empirical constraints and modeling. Our resulting framework does not require a priori assumptions of the O2- versus H2O-oxygen ratio in sulfate and accounts for the signals of mass dependent and mass independent fractionation in the ∆^(17)O and δ^(18)O of sulfate's O2-oxygen source. Within this framework, new ∆^(17)O measurements of sulfate constrain ~2.3Ga Paleoproterozoic gross primary productivity to between 6 and 160 times present-day levels, with important implications for the biological carbon cycle response to high CO2concentrations prevalent on the early Earth.

sulfate, oxygen isotopes, atmospheric oxygen, sulf↗
NASA NTRS2020

Adaptive, Model-Driven Observation for Earth Science

In this article we introduce a preliminary effort to apply an adaptive and model-driven sensing framework to the study of large scale storms. Such systems pose great challenges as studying complex, fast developing Earth science phenomena such as hurricanes have significant spatial extent and complex temporal evolution making comprehensive sensing of the entire phenomena prohibitive. We use adaptive sensing to direct sensing in an autonomous and intelligent cycle. We show how online analysis would increase the knowledge of the event and decrease uncertainty in predictions.

Swope, J.↗
NASA NTRS2024

A Fair, Economically-Efficient, Incentive-Aligned, Scalable Airspace Auction Mechanism for UAV Traffic Management

Unmanned Aerial Vehicles (UAVs) are increasingly used in a wide range of applications such as cinematography, package delivery, and surveying. As a result, regulators have become interested in developing UAV Traffic Management (UTM) systems to coordinate UAV traffic. One possible framework for UTM is a combinatorial auction. Under this framework, airspace is modeled as a grid of space-time cells. UAV operators bid on sets of cells which collectively form flight paths for their UAVs. An ideal airspace auction should: be fair, be incentive-aligned, be scalable, allocate airspace economically-efficiently, enable price discovery, and reduce the work required to participate where possible. In this paper, we propose the first auction mechanism for airspace allocation that meets the criteria above. Our mechanism: (a) is provably economically-efficient, fair and incentive-aligned, (b) shares pricing information with bidders and (c) has features which reduce the burden of participating. We evaluate our mechanism on scenarios based on a Japan Aerospace Exploration Agency (JAXA) case study and find that it can scale to 26,000 bids.

Robert Allan Morris↗
NASA NTRS2016

Benefit of Modeling the Observation Error in a Data Assimilation Framework Using Vegetation Information Obtained From Passive Based Microwave Data

A primary operational goal of the United States Department of Agriculture (USDA) is to improve foreign market access for U.S. agricultural products. A large fraction of this crop condition assessment is based on satellite imagery and ground data analysis. The baseline soil moisture estimates that are currently used for this analysis are based on output from the modified Palmer two-layer soil moisture model, updated to assimilate near-real time observations derived from the Soil Moisture Ocean Salinity (SMOS) satellite. The current data assimilation system is based on a 1-D Ensemble Kalman Filter approach, where the observation error is modeled as a function of vegetation density. This allows for offsetting errors in the soil moisture retrievals. The observation error is currently adjusted using Normalized Difference Vegetation Index (NDVI) climatology. In this paper we explore the possibility of utilizing microwave-based vegetation optical depth instead.

Vegetation↗
NASA NTRS2001

Aerosol Modeling for the Global Model Initiative

The goal of this project is to develop an aerosol module to be used within the framework of the Global Modeling Initiative (GMI). The model development work will be preformed jointly by the University of Michigan and AER, using existing aerosol models at the two institutions as starting points. The GMI aerosol model will be tested, evaluated against observations, and then applied to assessment of the effects of aircraft sulfur emissions as needed by the NASA Subsonic Assessment in 2001. The work includes the following tasks: 1. Implementation of the sulfur cycle within GMI, including sources, sinks, and aqueous conversion of sulfur. Aerosol modules will be added as they are developed and the GMI schedule permits. 2. Addition of aerosol types other than sulfate particles, including dust, soot, organic carbon, and black carbon. 3. Development of new and more efficient parameterizations for treating sulfate aerosol nucleation, condensation, and coagulation among different particle sizes and types.

Weisenstein, Debra K.↗
NASA NTRSDate not supplied

High-fidelity Modeling and Visualizing of Solar Radiation Pressure A Framework for High-fidelity Analysis

Solar Radiation Pressure (SRP) is the force produced by the impact of sunlight photons on the surface of the spacecraft. This extra force, despite being small,plays an important role on trajectory design and orbit determination. In this pa-per we present an open-source tool that enables the user to compute high-fidelity approximations of SRP accelerations for a given spacecraft using ray-tracing techniques. The tool also allows the user to compare between different fidelity levels and different models like the N-plate or the cannonball finding a trade-off on the SRP accuracy between computation time and accuracy.

Leandro Zardain↗
NASA NTRS1997

LQR Control of Shell Vibrations Via Piezoceramic Actuators

A model-based Linear Quadratic Regulator (LQR) method for controlling vibrations in cylindrical shells is presented. Surface-mounted piezo-ceramic patches are employed as actuators which leads to unbounded control input operators. Modified Donnell-Mushtari shell equations incorporating strong or Kelvin-Voigt damping are used to model the system. The model is then abstractly formulated in terms of sesquilinear forms. This provides a framework amenable for proving model well-posedness and convergence of LQR gains using analytic semigroup results combined with LQR theory for unbounded input operators. Finally, numerical examples demonstrating the effectiveness of the method are presented.

delRosario, R. C. H.↗
NASA NTRS1992

Automation life-cycle cost model

The problem domain being addressed by this contractual effort can be summarized by the following list: Automation and Robotics (A&R) technologies appear to be viable alternatives to current, manual operations; Life-cycle cost models are typically judged with suspicion due to implicit assumptions and little associated documentation; and Uncertainty is a reality for increasingly complex problems and few models explicitly account for its affect on the solution space. The objectives for this effort range from the near-term (1-2 years) to far-term (3-5 years). In the near-term, the envisioned capabilities of the modeling tool are annotated. In addition, a framework is defined and developed in the Decision Modelling System (DEMOS) environment. Our approach is summarized as follows: Assess desirable capabilities (structure into near- and far-term); Identify useful existing models/data; Identify parameters for utility analysis; Define tool framework; Encode scenario thread for model validation; and Provide transition path for tool development. This report contains all relevant, technical progress made on this contractual effort.

Gathmann, Thomas P.↗
NASA NTRS1993

Parallelizing Timed Petri Net simulations

The possibility of using parallel processing to accelerate the simulation of Timed Petri Nets (TPN's) was studied. It was recognized that complex system development tools often transform system descriptions into TPN's or TPN-like models, which are then simulated to obtain information about system behavior. Viewed this way, it was important that the parallelization of TPN's be as automatic as possible, to admit the possibility of the parallelization being embedded in the system design tool. Later years of the grant were devoted to examining the problem of joint performance and reliability analysis, to explore whether both types of analysis could be accomplished within a single framework. In this final report, the results of our studies are summarized. We believe that the problem of parallelizing TPN's automatically for MIMD architectures has been almost completely solved for a large and important class of problems. Our initial investigations into joint performance/reliability analysis are two-fold; it was shown that Monte Carlo simulation, with importance sampling, offers promise of joint analysis in the context of a single tool, and methods for the parallel simulation of general Continuous Time Markov Chains, a model framework within which joint performance/reliability models can be cast, were developed. However, very much more work is needed to determine the scope and generality of these approaches. The results obtained in our two studies, future directions for this type of work, and a list of publications are included.

Nicol, David M.↗
NASA NTRS1986

Quasi-periodic oscillations as a probe of galactic-bulge X-ray sources

Quasi-periodic oscillations (QPOs) with frequencies in the range 5-50 Hz have recently been discovered in X-rays from two bright galactic-bulge sources and from Sco X-1. A shot-noise model that provides a mathematical framework for analyzing the constraints imposed on physical models by the observed power density spectra is described. A variety of physical models are then examined briefly. One of the most promising, the beat-frequency-modulated accretion model, is adopted as a working hypothesis to consider the clues it may provide concerning the galactic-bulge sources. Finally, some key observations are noted.

Lamb, F. K.↗
NASA NTRS1990

Laser Atmospheric Wind Sounder (LAWS) phase 1. Volume 3: Project cost estimates

The laser atmospheric wind sounder (LAWS) cost modeling activities were initiated in phase 1 to establish the ground rules and cost model that would apply to both phase 1 and phase 2 cost analyses. The primary emphasis in phase 1 was development of a cost model for a LAWS instrument for the Japanese Polar Orbiting Platform (JPOP). However, the Space Station application was also addressed in this model, and elements were included, where necessary, to account for Space Station unique items. The cost model presented in the following sections defines the framework for all LAWS cost modeling. The model is consistent with currently available detail, and can be extended to account for greater detail as the project definition progresses.

Source record↗
NASA NTRS2004

X-Ray Reprocessing in Active Galactic Nuclei

This is the final report for research entitled "X-ray reprocessing in active galactic nuclei," into X-ray absorption and emission in various classes of active galaxy via X-ray spectral signatures. The fundamental goal of the research was to use these signatures as probes of the central engine structure and circumnuclear environment of active galactic nuclei. The most important accomplishment supported by this grant involved the detailed analysis and interpretation of the XMM data for the bright Seyfert 1 galaxy MCG-6-30-15. This work was performed by Drs. Christopher Reynolds and Mitchell Begelman in collaboration with Dr. Jorn Wilms (University of Tubingen, Germany; PI of the XMM observation) and other European scientists. With XMM we obtained medium resolution X-ray spectra of unprecedented quality for this Seyfert galaxy. Modeling the X-ray spectrum within the framework of accretion disk reflection models produced the first evidence for energy extraction from the spin of a black hole. Specifically, we found that the extreme gravitational redshifts required to explain the X-ray spectrum suggests that the bulk of the energy dissipation is concentrated very close to the black hole, in contrast with the expectations of any pure accretion disk model. In a second paper we addressed the low- energy spectral complexity and used RXTE specta to pin down the high-energy spectral index, thus firming up our initial interpretation. Additionally, we carried out detailed spectral and variability analyses of a number of Seyfert and radio galaxies (e.g., NGC 5548 and 3C 111) and developed general techniques that will be useful in performing X-ray reverberation mapping of accretion disks in AGN, once adequate data becomes available. A list of papers supported by this research is included.

Begelman, Mitchell C.↗
NASA NTRS2012

Advancing Data Assimilation in Operational Hydrologic Forecasting: Progresses, Challenges, and Emerging Opportunities

Data assimilation (DA) holds considerable potential for improving hydrologic predictions as demonstrated in numerous research studies. However, advances in hydrologic DA research have not been adequately or timely implemented in operational forecast systems to improve the skill of forecasts for better informed real-world decision making. This is due in part to a lack of mechanisms to properly quantify the uncertainty in observations and forecast models in real-time forecasting situations and to conduct the merging of data and models in a way that is adequately efficient and transparent to operational forecasters. The need for effective DA of useful hydrologic data into the forecast process has become increasingly recognized in recent years. This motivated a hydrologic DA workshop in Delft, the Netherlands in November 2010, which focused on advancing DA in operational hydrologic forecasting and water resources management. As an outcome of the workshop, this paper reviews, in relevant detail, the current status of DA applications in both hydrologic research and operational practices, and discusses the existing or potential hurdles and challenges in transitioning hydrologic DA research into cost-effective operational forecasting tools, as well as the potential pathways and newly emerging opportunities for overcoming these challenges. Several related aspects are discussed, including (1) theoretical or mathematical aspects in DA algorithms, (2) the estimation of different types of uncertainty, (3) new observations and their objective use in hydrologic DA, (4) the use of DA for real-time control of water resources systems, and (5) the development of community-based, generic DA tools for hydrologic applications. It is recommended that cost-effective transition of hydrologic DA from research to operations should be helped by developing community-based, generic modeling and DA tools or frameworks, and through fostering collaborative efforts among hydrologic modellers, DA developers, and operational forecasters.

forecasting↗
NASA NTRSDate not supplied

Trajectory Planning and Online Performance Model Estimation for Advanced Air Mobility

We propose a framework for adaptive guidance based on optimal control and estimation using closed-loop performance models. In the proposed approach, parameters of a reduced-order performance model are estimated in real time so that trajectories and guidance commands are replanned with more accurate knowledge of the system's response and performance capabilities. To apply this methodology to flight control systems, we introduce a simple yet expressive performance model modified from a reference linear design model. The proposed framework is applied to guidance of a simulated Advanced Air Mobility class concept aircraft experiencing control effector failures. We demonstrate that, by optimizing performance model parameters in real time, guidance commands can be intelligently adjusted to recover system stability and the performance of a full-order vehicle model, even in the event of effector failures. Furthermore, the reduced-order performance model requires a fraction of the computational cost of the full-order model, facilitating real-time use of adaptive, optimal guidance.

Differential dynamic programming↗
NASA NTRSDate not supplied

Trajectory Planning and Online Performance Model Estimation for Advanced Air Mobility

We propose a framework for adaptive guidance based on optimal control and estimation using closed-loop performance models. In the proposed approach, parameters of a reduced-order performance model are estimated in real time so that trajectories and guidance commands are replanned with more accurate knowledge of the system's response and performance capabilities. To apply this methodology to flight control systems, we introduce a simple yet expressive performance model modified from a reference linear design model. The proposed framework is applied to guidance of a simulated Advanced Air Mobility class concept aircraft experiencing control effector failures. We demonstrate that, by optimizing performance model parameters in real time, guidance commands can be intelligently adjusted to recover system stability and the performance of a full-order vehicle model, even in the event of effector failures. Furthermore, the reduced-order performance model requires a fraction of the computational cost of the full-order model, facilitating real-time use of adaptive, optimal guidance.

Differential dynamic programming↗
NASA NTRS2007

Analysis of Complex Valve and Feed Systems

A numerical framework for analysis of complex valve systems supports testing of propulsive systems by simulating key valve and control system components in the test loop. In particular, it is designed to enhance the analysis capability in terms of identifying system transients and quantifying the valve response to these transients. This system has analysis capability for simulating valve motion in complex systems operating in diverse flow regimes ranging from compressible gases to cryogenic liquids. A key feature is the hybrid, unstructured framework with sub-models for grid movement and phase change including cryogenic cavitations. The multi-element unstructured framework offers improved predictions of valve performance characteristics under steady conditions for structurally complex valves such as pressure regulator valve. Unsteady simulations of valve motion using this computational approach have been carried out for various valves in operation at Stennis Space Center such as the split-body valve and the 10-in. (approx.25.4-cm) LOX (liquid oxygen) valve and the 4-in. (approx.10 cm) Y-pattern valve (liquid nitrogen). Such simulations make use of variable grid topologies, thereby permitting solution accuracy and resolving important flow physics in the seat region of the moving valve. An advantage to this software includes possible reduction in testing costs incurred due to disruptions relating to unexpected flow transients or functioning of valve/flow control systems. Prediction of the flow anomalies leading to system vibrations, flow resonance, and valve stall can help in valve scheduling and significantly reduce the need for activation tests. This framework has been evaluated for its ability to predict performance metrics like flow coefficient for cavitating venturis and valve coefficient curves, and could be a valuable tool in predicting and understanding anomalous behavior of system components at rocket propulsion testing and design sites.

Ahuja, Vineet↗
NASA NTRS2020

Bridging the Gap Between Requirements and Model Analysis : Evaluation on Ten Cyber-Physical Challenge Problems

Formal verfication and simulation are powerful tools to validate requirements against complex systems. [Problem] Requirements are developed in early stages of the software lifecycle and are typically written in ambiguous natural language. There is a gap between such requirements and formal notations that can be used by verification tools, and lack of support for proper association of requirements with software artifacts for verification. [Principal idea] We propose to write requirements in an intuitive, structured natural language with formal semantics, and to support formalization and model/code verification as a smooth, well-integrated process. [Contribution] We have developed an end-to-end, open source requirements analysis framework that checks Simulink models against requirements written in structured natural language. Our framework is built in the Formal Requirements Elicitation Tool (fret); we use fret's requirements language named fretish, and formalization of fretish requirements in temporal logics. Our proposed framework contributes the following features: 1) automatic extraction of Simulink model information and association of fretish requirements with target model signals and components; 2) translation of temporal logic formulas into synchronous dataflow cocospec specifications as well as Simulink monitors, to be used by verification tools; we establish correctness of our translation through extensive automated testing; 3) interpretation of counterexamples produced by verification tools back at requirements level. These features support a tight integration and feedback loop between high level requirements and their analysis. We demonstrate our approach on a major case study: the Ten Lockheed Martin Cyber-Physical, aerospace-inspired challenge problems.

Mavridou, Anastasia↗
NASA NTRS1983

A theoretical and experimental study of turbulent particle-laden jets

Mean and fluctuating velocities of both phases, particle mass fluxes, particle size distributions in turbulent particle-laden jets were measured. The following models are considered: (1) a locally homogeneous flow (LHF) model, where slip between the phases was neglected; (2) a deterministic separated flow (DSF) model, where slip was considered but effects of particle dispersion by turbulence were ignored; and (3) a stochastic separated flow (SSF) model. The SSF model performed reasonably well with no modifications in the prescriptions for eddy properties from its original calibration. A modified k- model, incorporating direct contributions of interphase transport on turbulence properties (turbulence modulation), was developed within the framework of the SSF model.

Shuen, J. S.↗