Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “minimum”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Juvenile Chinook Salmon Survival When Exposed to Simulated Dam Passage after Being Implanted with a New Microacoustic Transmitter

The current minimum size for tagging Chinook Salmon Oncorhynchus tshawytscha with acoustic transmitters is = 95 mm fork length (FL). Using a new injectable acoustic transmitter (AT), our objective was to determine a minimum size for tagging Chinook Salmon. We measured survival and transmitter and tissue retention after exposure to rapid pressure changes (n = 399) or shear forces (n = 308). Fish (69–107 mm FL) were implanted with an AT (0.22 g; AT-only) or an AT and a passive integrated transponder (PIT; 0.10 g; AT+PIT) tag through a 3-mm incision with no sutures, or did not receive an incision or tag (control). Survival and transmitter and tissue retention following pressure changes was significantly lower for AT-only (0.70) and AT+PIT (0.54) fish compared to controls (0.85). No transmitters were expelled but 2.2% of AT-only and 12.5% of AT+PIT fish had tissue or a transmitter protruding. Following shear exposure, survival and transmitter and tissue retention was significantly lower for AT-only (0.70) and AT+PIT (0.61) fish compared to controls (0.98). Here, tissue expulsion described 87% of AT-only and 80% of AT+PIT mortalities. In both tests fish larger than 85–88 mm FL had a higher probability of survival and tissue and transmitter retention than smaller fish. We recommend the minimum size for tagging continue to be 95 mm FL, using a 3-mm incision with no sutures.

59 BASIC BIOLOGICAL SCIENCES↗

TATB Sensitivity to Shocks from Electrical Arcs

Use of insensitive high explosives (IHEs) has significantly improved ammunition safety because of their remarkable insensitivity to violent cook–off, shock and impact. Triamino–trinitrobenzene (TATB) is the IHE used in many modern munitions. Previously, lightning simulations in different test configurations have shown that the required detonation threshold for standard density TATB at ambient and elevated temperatures (250 °C) has a sufficient margin over the shock caused by an arc from the most severe lightning. In this paper, the Braginskii model with Lee–More channel conductivity prescription is used to demonstrate how electrical arcs from lightning could cause detonation in TATB. The steep rise and slow decay in typical lightning pulse are used in demonstrating that the shock pressure from an electrical arc, after reaching the peak, falls off faster than the inverse of the arc radius. For detonation to occur, two necessary detonation conditions must be met: the Pop–Plot criterion and minimum spot size requirement. The relevant Pop–Plot for TATB at 250 °C was converted into an empirical detonation criterion, which is applicable to explosives subject to shocks of variable pressure. The arc cross–section was required to meet the minimum detonation spot size reported in the literature. Furthermore, one caveat is that when the shock pressure exceeds the detonation pressure the Pop–Plot may not be applicable, and the minimum spot size requirement may be smaller.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Resolution-adapted recombination of structural features significantly improves sampling in restraint-guided structure calculation

Recent work has shown that NMR structures can be determined by integrating sparse NMR data with structure prediction methods such as Rosetta. The experimental data serve to guide the search for the lowest energy state towards the deep minimum at the native state which is frequently missed in Rosetta de novo structure calculations. However, as the protein size increases, sampling again becomes limiting; for example, the standard Rosetta protocol involving Monte Carlo fragment insertion starting from an extended chain fails to converge for proteins over 150 amino acids even with guidance from chemical shifts (CS-Rosetta) and other NMR data. The primary limitation of this protocol—that every folding trajectory is completely independent of every other—was recently overcome with the development of a new approach involving resolution-adapted structural recombination (RASREC). Here we describe the RASREC approach in detail and compare it to standard CS-Rosetta. We show that the improved sampling of RASREC is essential in obtaining accurate structures over a benchmark set of 11 proteins in the 15-25 kDa size range using chemical shifts, backbone RDCs and H N -H N NOE data; in a number of cases the improved sampling methodology makes a larger contribution than incorporation of additional experimental data. Experimental data are invaluable for guiding sampling to the vicinity of the global energy minimum, but for larger proteins, the standard Rosetta fold-from-extended-chain protocol does not converge on the native minimum even with experimental data and the more powerful RASREC approach is necessary to converge to accurate solutions.

59 BASIC BIOLOGICAL SCIENCES↗

Colloid Transport in Saturated Porous Media: Elimination of Attachment Efficiency in a New Colloid Transport Model

A new colloid transport model is introduced that is conceptually simple but captures the essential features of complicated attachment and detachment behavior of colloids when conditions of secondary minimum attachment exist. This model eliminates the empirical concept of collision efficiency; the attachment rate is computed directly from colloid filtration theory. Also, a new paradigm for colloid detachment based on colloid population heterogeneity is introduced. Assuming the dispersion coefficient can be estimated from tracer behavior, this model has only two fitting parameters: (1) the fraction of colloids that attach irreversibly and (2) the rate at which reversibly attached colloids leave the surface. These two parameters were correlated to physical parameters that control colloid transport such as the depth of the secondary minimum and pore water velocity. Given this correlation, the model serves as a heuristic tool for exploring the influence of physical parameters such as surface potential and fluid velocity on colloid transport. This model can be extended to heterogeneous systems characterized by both primary and secondary minimum deposition by simply increasing the fraction of colloids that attach irreversibly.

Landkamer, Lee L.↗

Solving the wrong hierarchy problem

Many theories require augmenting the Standard Model with additional scalar fields with large order one couplings. We present a new solution to the hierarchy problem for these scalar fields. We explore parity- and Z 2 -symmetric theories where the Standard Model Higgs potential has two vacua. The parity or Z 2 copy of the Higgs lives in the minimum far from the origin while our Higgs occupies the minimum near the origin of the potential. This approach results in a theory with multiple light scalar fields but with only a single hierarchy problem, since the bare mass is tied to the Higgs mass by a discrete symmetry. The new scalar does not have a new hierarchy problem associated with it because its expectation value and mass are generated by dimensional transmutation of the scalar quartic coupling. The location of the second Higgs minimum is not a free parameter, but is rather a function of the matter content of the theory. As a result, these theories are extremely predictive. We develop this idea in the context of a solution to the strong CP problem. Lastly, we show this mechanism postdicts the top Yukawa to be within 1σ of the currently measured value and predicts scalar color octets with masses in the range 9-200 TeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

An efficient SAC-OCDMA system using three different codes with two different detection techniques for maximum allowable users

In this paper, three codes spectral amplitude coding optical code division multiple access (SAC-OCDMA) are proposed and compared in terms of system performance including bit error rate (BER), number of active users, high achievable data rate, high signal to noise ratio (SNR) and the minimum received power that the OCDMA system supports to achieve a minimum BER value. The proposed codes are diagonal double weight (DDW) codes, modified double weight (MDW) codes and enhanced double weight (EDW). Different detection as AND subtraction detection technique and single photodiode detection (SPD) are investigated to reduce the effect of both the multiple access interference and phase induced intensity noise. The obtained results show that SAC-OCDMA using EDW code with SPD detection can achieve large number users with better BER (~ 10{sup −9}), SNR (> 20 dB), and minimum received power (~ − 20 dBm) relative to the other codes with other detection techniques.

42 ENGINEERING↗

Glass-like energy and property landscape of Pt nanoclusters

Pt nanoclusters play an important role in catalysis-related applications. Essential to their activities are their geometries and energy landscapes. In this work, we studied the energy landscapes of Pt clusters using a parallel differential evolution optimization algorithm and an accelerated ab initio atomic relaxation method, which allowed us to explore unprecedentedly large numbers of geometry local minima at ab initio level. We found many lower-energy isomers with low symmetry in their geometry. The energy landscapes were demonstrated to be glass-like with a large number of local minimum structures close to the global minimum. The electronic and magnetic properties of most glass-like local minima were dramatically different from the global minimum, and they should be observed in the experimental measurements. The connections between these local minima were further analyzed using data mining techniques.

Chen, Zhanghui↗

Assessment of the potential for criticality in the far field of a used nuclear fuel repository

This study aims to assess the likelihood for criticality in the far field of a repository for direct disposal of commercial light water reactor used nuclear fuel. Two models are used in combination: (1) a neutronics model to estimate the minimum critical masses of spherical, water-saturated depositions of fissile material; (2) a transport model to simulate the dissolution of waste packages arranged in an array and the subsequent transport of fissile solutes through fractured bedrock to a single accumulation location. The neutronics model shows that heavy metals from different types of used fuel present the same minimum critical mass behavior in the parameter space of initial enrichment and burnup, dictated largely by the fissile content. However, the magnitude of the minimum critical mass varies significantly within that parameter space, and secondary effects like the presence of absorbing nuclides play a minor role. Here, the transport model employs various subsurface transport scenarios, and for each scenario the mass of each isotope and the overall fissile content of the accumulation is reported from the time of canister failure up to one hundred million years at various distances from the repository edge. Taking the results of the two models in concert, it is shown that even if the accumulation of a critical mass is possible under conservative conditions, these conditions are unlikely to be present in the vicinity of a carefully engineered repository. Based on the results of each model, recommendations for risk mitigation in terms of waste characteristics and repository design are given.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Quantum field theory with the generalized uncertainty principle II: Quantum Electrodynamics

Highlights: • Relativistic Generalized Uncertainty Principle gives Frame independent minimum length. • Quantum Gravity modified Dirac equation from Modified Klein–Gordon Equations. • There exists a Quantum Gravity modified Lagrangian for a spinor field theory. • Feynman vertices contain 2 fermions & up to 5 gauge bosons are allowed. • Minimum length modifies the amplitude of Electrodynamic electron–muon scattering. Continuing our earlier work on the application of the Relativistic Generalized Uncertainty Principle (RGUP) to quantum field theories, in this paper we study Quantum Electrodynamics (QED) with minimum length. We obtain expressions for the Lagrangian, Feynman rules and scattering amplitudes of the theory, and discuss their consequences for current and future high energy physics experiments. We hope this will provide an improved window for testing Quantum Gravity effects in the laboratory.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Biodiesel production from engineered sugarcane lipids under uncertain feedstock compositions: Process design and techno-economic analysis

In this study, different process schemes were designed and evaluated for biodiesel production from engineered cane lipids with uncertain fatty acid compositions. Four different process schemes were compared under (i) thermal glycerolysis and (ii) enzymatic glycerolysis approaches. These schemes were based on the biodiesel yield and economic indicators such as the net present value (NPV) and the minimum selling price (MSP) of biodiesel. A scheme with polar lipid separation under thermal glycerolysis resulted in the maximum NPV ($\$96.5$ million) and minimum MSP ($\$1107$ /ton biodiesel), respectively. Through local sensitivity analysis, it was concluded that the cane lipid percentage is the most significant factor influencing process economics. A conjoint analysis of the lipid procurement price and cane lipid percent suggested that 15% cane lipids with a low lipid procurement price ($\$0.536$ /kg) results in a positive NPV. When the cane lipid price is higher (> $\$0.80$ /kg), a 20% lipid content should be considered to achieve a positive NPV. At 20% cane lipids, the worst-case and best-case scenarios were evaluated by analyzing the interplay of the three most important parameters, Here, the best-case scenario revealed that the minimum NPV under any process scheme could yield more than $\$100$ million (or MSP: $\$0.80$ /L), and the worst-case analysis showed that losses incurred by the plant could be as high as 80 million (MSP: $\$1.36$ /L). A Monte Carlo simulation indicated that there is a 70% chance of the plant being profitable (NPV > 0).

09 BIOMASS FUELS↗

Coverage-dependent structures and thermodynamic stability of intercalated Gd layers beneath buffer-layer graphene on SiC(0001)

Electronic properties of two-dimensional (2D) materials are strongly influenced by their atomic arrangements, making the theoretically-aided characterization of experimentally-synthesized 2D structures crucial. Using first-principles density functional theory, we analyze nearly 200 configurations of intercalated Gd layers beneath buffer-layer graphene on SiC(0001) over a Gd coverage range of 0.01 < θ < 1.2. By fully relaxing selectively-constructed configurations at each coverage within a large, low-strain supercell, we determine the coverage dependence of the chemical potential for intercalated Gd structures. Thermodynamically-preferred configurations below θ ≈ 0.8 form single-atom-thick monolayers, while 3D-like or multilayer structures emerge beyond θ ≈ 0.9. Most structures are amorphous-like, including the configuration at the chemical potential minimum around θ ≈ 0.4. In contrast, a strongly stretched Gd(0001)-like monolayer at θ = 1/3 and a nearly perfect Gd(0001) monolayer at θ = 1 are significantly less favorable with 0.16 eV and 0.82 eV higher chemical potentials above the minimum, respectively. Furthermore, the graphene layer decoupled by intercalated Gd near the chemical potential minimum is significantly flatter compared to its morphology above intercalated 3D structures at higher coverages and nearly isolated Gd atoms in the lowest coverage region. In conclusion, these findings align with our experimental results and underscore the need for further research on this unique intercalated system, which holds significant potential for diverse applications.

36 MATERIALS SCIENCE↗

Peak cooling load shift capability of a thermal energy storage system integrated with an active insulation system in US climate zones

This study aims to evaluate a thermal energy storage (TES) system integrated with an active insulation system (AIS) to form a TES + AIS integrated wall system as a partition and as a secondary cooling system to shift the peak load and reduce cooling energy consumption. To understand and demonstrate its cooling performance, the TES + AIS integrated wall system was installed in an office building in Oak Ridge, Tennessee. To investigate the effect of the TES + AIS integrated wall system in a typical office building and various climate zones, the US Department of Energy’s prototype office building model was modified to accommodate the proposed system. In this work, results showed that the minimum size of the proposed system to achieve energy savings varies depending on climate conditions. The minimum size of the proposed system for cooling energy saving and shifting peak cooling demand in climate zones 2, 3, and 5 is 29.7 m 2 , whereas it is 44.6 m 2 in zones 4 and 6. By installing the minimum size of the proposed system, 11.3 % to 16.4 % of cooling energy can be shifted during discharge hours in a representative summer day.

25 ENERGY STORAGE↗

A first and second law analysis of a thermoresponsive polymer desiccant dehumidification and cooling cycle

Herein, we present a theoretical description for a new desiccant air conditioning cycle that uses thermoresponsive polymers instead of traditional desiccants. We use a combined first and second law analysis to demonstrate that this new cycle has three major advantages relative to the traditional case: (i) it can regenerate at lower temperatures, (ii) it can harvest liquid water and (iii) it has significantly higher coefficients of performance (COPs). For example, this new cycle can achieve a COP of 5.1 when regenerated at 95 degrees C, whereas the traditional desiccant cycle is limited to a COP of ~ 1. The fundamental origins of these advantages can be traced to the method of regeneration. The traditional desiccant cycle regenerates by flowing hot air over the desiccant, which provides a medium for gaseous water desorption. However, this also generates entropy and places a minimum temperature constraint on the hot air. In contrast, the thermoresponsive polymer cycle regenerates through a polymer phase transition. The polymer absorbs water vapor in humid air, and then it expels liquid water when raised above its transition temperature. This regeneration method generates liquid water that can be harvested and relaxes constraints on entropy generation and minimum temperature. The minimum regeneration temperature of the thermoresponsive cycle is only limited by the transition temperature of the polymer, which can be tuned through materials science. Due to its liquid water harvesting capability, the new cycle potentially eliminates water consumption when used with evaporative cooling, or it can be directly used for atmospheric water harvesting.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Design optimization of an additively manufactured prototype recuperator for supercritical CO 2 power cycles

Supercritical CO 2 (sCO 2 ) power cycles are being developed due to their potential for high efficiency and reduced capital cost. It is necessary that these recuperators operate at high pressures and temperatures, up to 30 MPa and 900 K, with effectiveness values > 95% and pressure drops <1% to achieve high cycle efficiencies. Moreover, it is also necessary to have reasonable cost recuperators to control the capital costs of the sCO 2 power cycles. In this study, a Plate Pin-Fin (PPF) heat exchanger has been proposed as an sCO 2 recuperator. This preliminary recuperator design leverages capabilities enabled by additive manufacturing. Although the PPF design has characteristics similar to those of a plate heat exchanger, small diameter and relatively long fins are used to increase surface area, enhance heat transfer, and provide structural support for the partition plates that separate the fluid streams. Existing correlations for heat transfer and pressure drop were adapted for the PPF heat exchanger. These correlations were implemented in a 1D analytical model and used for the optimization of a 5-kW th high temperature recuperator for an indirect sCO 2 cycle by varying the design parameters to minimize the quantity of material required. A 3D conjugate heat transfer numerical simulations were conducted to validate the heat transfer and pressure loss correlations. A steepest descent method was used to minimize heat exchanger mass for a 5-kW prototype recuperator subject to a maximum specified pressure drop. Additionally, the design analysis indicated that an optimum PPF recuperator would be attained for the minimum allowable pin transverse spacing, minimum pin width, minimum pin height and near maximum cell aspect ratio. Moreover, at a low material requirement of 0.216 kg/kW and a pressure drop, which is almost five times lower than the allowable pressure drop design target, the optimized PPF heat exchanger has the high potential to be an alternative to a printed circuit heat exchanger, which is a conservative design basis for the current state-of-the-art sCO 2 recuperators.

42 ENGINEERING↗

Reirradiation After Radical Radiation Therapy: A Survey of Patterns of Practice Among Canadian Radiation Oncologists

Purpose: The objective of this study was to survey the use of reirradiation (Re-RT) for in-field failures after previous radical radiation treatment (RT) among Canadian radiation oncologists (ROs). Methods and Materials: An electronic survey was sent to 271 ROs in Canada. The completed surveys were received electronically via e-mail and the data were analyzed using SAS 9.1.3 software. Results: A total of 183 ROs (67.5%) completed and returned the survey. The majority of the respondents were involved in the practice of either breast (48%) or genitourinary (43%) tumor sites. A total of 49% of the participants were interested in using Re-RT for the management of in-field recurrences. The goals of the therapy would be improvement of quality of life (99%), locoregional control (80%), or cure (32%). Most of the physicians believed that patients should have a minimum Karnofsky performance status of 50 or Eastern Cooperative Oncology Group performance status of 3, a minimum life expectancy of 3 months, and a minimum interval from initial treatment of 3 months if Re-RT were to be given with curative intent. Conclusions: This survey showed that a wide variation existed among ROs in their approach to Re-RT. Newer technologies in RT planning and delivery would be employed to facilitate normal tissue avoidance. The results of this study suggested that a consensus meeting was needed to establish guidelines for the practice and prospective evaluation of Re-RT.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Clinical Toxicities and Dosimetric Parameters After Whole-Pelvis Versus Prostate-Only Intensity-Modulated Radiation Therapy for Prostate Cancer

Purpose: To assess whether whole-pelvis (WP) intensity-modulated radiation therapy (IMRT) is associated with increased toxicity compared with prostate-only (PO) IMRT. Methods and Materials: We retrospectively analyzed all patients with prostate cancer undergoing definitive IMRT to 79.2 Gy with concurrent androgen deprivation at our institution from November 2005 to May 2007 with a minimum follow-up of 12 months. Thirty patients received initial WP IMRT to 45 Gy in 1.8-Gy fractions, and thirty patients received PO IMRT. Study patients underwent computed tomography simulation and treatment planning by use of predefined dose constraints. Bladder and rectal dose-volume histograms, maximum genitourinary (GU) and gastrointestinal (GI) Radiation Therapy Oncology Group toxicity grade, and late Grade 2 or greater toxicity-free survival curves were compared between the two groups by use of the Student t test, Fisher exact test, and Kaplan-Meier curve, respectively. Results: Bladder minimum dose, mean dose, median dose, volume receiving 5 Gy, volume receiving 20 Gy, volume receiving 40 Gy, and volume receiving 45 Gy and rectal minimum dose, median dose, and volume receiving 20 Gy were significantly increased in the WP group (all p values < 0.01). Maximum acute GI toxicity was limited to Grade 2 and was significantly increased in the WP group at 50% vs. 13% the PO group (p = 0.006). With a median follow-up of 24 months (range, 12-35 months), there was no difference in late GI toxicity (p = 0.884) or in acute or late GU toxicity. Conclusions: Despite dosimetric differences in the volume of bowel, bladder, and rectum irradiated in the low-dose and median-dose regions, WP IMRT results only in a clinically significant increase in acute GI toxicity, in comparison to PO IMRT, with no difference in GU or late GI toxicity.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

The Effect of Dose-Volume Parameters and Interfraction Interval on Cosmetic Outcome and Toxicity After 3-Dimensional Conformal Accelerated Partial Breast Irradiation

Purpose: To evaluate dose-volume parameters and the interfraction interval (IFI) as they relate to cosmetic outcome and normal tissue effects of 3-dimensional conformal radiation therapy (3D-CRT) for accelerated partial breast irradiation (APBI). Methods and Materials: Eighty patients were treated by the use of 3D-CRT to deliver APBI at our institutions from 2003-2010 in strict accordance with the specified dose-volume constraints outlined in the National Surgical Adjuvant Breast and Bowel Project B39/Radiation Therapy Oncology Group 0413 (NSABP-B39/RTOG 0413) protocol. The prescribed dose was 38.5 Gy in 10 fractions delivered twice daily. Patients underwent follow-up with assessment for recurrence, late toxicity, and overall cosmetic outcome. Tests for association between toxicity endpoints and dosimetric parameters were performed with the chi-square test. Univariate logistic regression was used to evaluate the association of interfraction interval (IFI) with these outcomes. Results: At a median follow-up time of 32 months, grade 2-4 and grade 3-4 subcutaneous fibrosis occurred in 31% and 7.5% of patients, respectively. Subcutaneous fibrosis improved in 5 patients (6%) with extended follow-up. Fat necrosis developed in 11% of women, and cosmetic outcome was fair/poor in 19%. The relative volume of breast tissue receiving 5%, 20%, 50%, 80%, and 100% (V5-V100) of the prescribed dose was associated with risk of subcutaneous fibrosis, and the volume receiving 50%, 80%, and 100% (V50-V100) was associated with fair/poor cosmesis. The mean IFI was 6.9 hours, and the minimum IFI was 6.2 hours. The mean and minimum IFI values were not significantly associated with late toxicity. Conclusions: The incidence of moderate to severe late toxicity, particularly subcutaneous fibrosis and fat necrosis and resulting fair/poor cosmesis, remains high with continued follow-up. These toxicity endpoints are associated with several dose-volume parameters. Minimum and mean IFI values were not associated with late toxicity.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Performance and cost analysis of liquid fuel production from H 2 and CO 2 based on the Fischer-Tropsch process

Electro-fuels can be produced from concentrated sources of carbon dioxide and hydrogen using electricity generated from renewable sources; this process enables energy storage at high volumetric energy density. Among the electro-fuels options, FT (Fischer-Tropsch) fuel is attractive for heavy-duty trucks and non-road transportation applications. This study conducts a techno-economic analysis of FT liquid fuel production from H 2 and CO 2 using a detailed performance analysis. Minimum fuel selling price is estimated for a broad range of H 2 and CO 2 prices and for a range of potential CO 2 credits. The analysis indicates that H 2 price has the largest impact on the minimum selling price of FT fuel. FT fuel production with a CO 2 price of $17.3/metric ton requires an H 2 price of $0.8/kg to be cost-competitive with the pre-tax petroleum diesel price of $3.1/gal in 2050 (before the application of any CO 2 credits). When the H 2 price is $2.0/kg from central water electrolysis (2020 target), the minimum selling price of the FT fuel is $5.4–5.9/gal. A sensitivity analysis shows that future system optimization of FT fuel production could focus on improving the H 2 and CO 2 recycle contributions and FT fuel conversion ratio. The analysis results can be combined with various upstream systems for H 2 and CO 2 production.

08 HYDROGEN↗