Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “lack”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Ultraviolet photometry from the orbiting astronomical observatory. XV - The strongly magnetic variable HD 215441

The Wisconsin Experiment Package on OAO-2 was used to obtain light curves of the strongly magnetic, variable Ap star HD 215441 over the wavelength range 1550 to 4250 A. This star is characterized by a lack of outstanding spectrum variability at wavelengths accessible from the ground, while undergoing UBV photometric variations of large amplitude. The observations of HD 215441 demonstrate that an Ap star need not be a striking spectrum variable at blue-visible wavelengths for its photometric variations to be controlled by opacity variations in the ultraviolet.

Leckrone, D. S.↗
NASA NTRS1974

Miniature load cell instrumentation for finite deformation biaxial testing of elastomers

Accuracy of biaxial test equipment to examine the nonlinear mechanical behavior of thin sheet specimens of elastomeric materials has been hampered by lack of precise determination of the force distribution along the sides of the specimen. It has been necessary to use an effective width established by approximate means to obtain the stress from the overall force applied along the edges. To avoid this experimental difficulty, individual miniature proof-ring load cells utilizing semiconductor strain gages have been developed and applied to the support hooks for the thin sheet specimens. Typical results are shown for time-dependent stress distributions for all degrees of biaxiality. An accurate evaluation of the effective specimen width is now possible.

Arenz, R. J.↗
NASA NTRS1974

Low-cost methods for fabrication of aluminum-boron shapes

Deformation processing has not been seriously considered as applicable to composite fabrication, particularly if the filament (e.g., boron) lacks plasticity. When, however, the brittle filament is clad with a ductile matrix such as 6061 Al, the underlying filament is protected from damage even when cold worked severely as in drawing and rolling. These two metal-working processes have been applied successfully to produce seven ply aluminum 50 vol % boron tubes up to 2 in. O.D. by 3 feet in length and flats 1 in. in width by 2 feet in length respectively. Although adequate densification is achieved via drawing and rolling, the former has been given major emphasis. Mechanical properties of rolled and drawn flats and tubes compare favorably with those prepared by static methods. However, the objective of the presentation is to focus on lower processing costs. In specific terms, 2 in. tubes in lengths up to 12 feet can be produced for as little as $150/lb. This is possible only because standard drawbench and carbide dies can be utilized. Furthermore, the major steps including cladding, preform preparation and drawing are conducive to automation.

Divecha, A. P.↗
NASA NTRS1974

Stellar model chromospheres. II - Procyon /F5 IV-V/

Derivation of a model for the chromosphere and upper photosphere of Procyon (F5 IV-V) based on calibrated observations of the K and 8542-A lines of Ca II, the k(2796-A) line of Mg II, and the K-line wings. The feasibility of this model synthesis approach to derive a preliminary model chromosphere is demonstrated despite the lack of spatial and spectral resolution associated with solar chromospheric studies. The proposed upper photosphere model is very similar to the radiative equilibrium Procyon model of Strom and Kurucz (1966), while the proposed chromospheric model is similar to the quiet solar chromosphere temperature distribution of Shine (1973) in the 6000 to 8000 K range.

Ayres, T. R.↗
NASA NTRS1974

Skylab Experiment T020 preliminary results concerning a foot-controlled maneuvering unit

Skylab Experiment T020 was developed to study the performance capabilities of astronauts using a relatively simple device maneuvering in an actual zero gravity environment. The experimental test bed, used as the maneuvering unit, employed foot-operated controls for translation along only the vertical or head-to-foot axis and for rotation about all three axes. The control thrusters were operated by direct mechanical linkage to the foot controls, and no stabilization system was employed. The results showed that subjects could successfully perform a number of relatively simple maneuvers but had some difficulties with unplanned or unrehearsed maneuvers of a more complex nature. Precise maneuvering within the confines of the orbital workshop was limited primarily by an inadequate body-restraint harness system and by lack of translation capability along the other two axes.

Hewes, D. E.↗
NASA NTRS1958

Notes on Space Technology

These notes are part of a space technology course given at the Flight Research Division of the NACA Langley Aeronautical Laboratory during the early part of 1958. The course was conducted as a self-education program within the Flight Research Division and the various Sections of the notes were prepared for the most part by members of the Division; however, four of the seventeen Sections were prepared by personnel from the Pilotless Aircraft Research Division and the Compressibility Research Division who were very helpful in making the program more complete. The notes have been compiled on a brief time schedule and it will be apparent to the reader that the present version is incomplete and to some extent may lack uniformity in length, type of presentation, and technical detail in the various Sections. Nevertheless, there has been a demand for the notes from those who have seen them, and it is thought that they might serve a useful purpose if they were made available on a wider basis. It is believed that for the sake of expediency this goal is best achieved by making the material available now in its present unedited form instead of following the usual NACA editing procedures.

Henry A Pearson↗
NASA NTRS1974

An exploratory flight investigation of helicopter sling-load placements using a closed-circuit television as a pilot aid

Helicopter sling load operations have been limited during pick up and delivery of external cargo by the lack of precision achieved by the combination of pilot, helicopter, and sling load. Use of a closed circuit television as a pilot aid during sling load delivery and placement was documented along with additional cases representing procedures currently employed by military and commercial operators. Although an increase in pilot workload was noted when the television system was used, the results indicated a comparable level of performance for each test case.

Dicarlo, D. J.↗
NASA NTRS1974

Assessment of ERTS-1 imagery as a tool for regional geological analysis in New York State

The author has identified the following significant results. Linear anomalies dominate the new geological information derived from ERTS-1 imagery, total lengths now exceeding 26,500 km. Maxima on rose diagrams for ERTS-1 anomalies correspond well with those for mapped faults and topographic lineaments. Multi-scale analysis of linears shows that single topographic linears at 1:2,500,000 may become dashed linears at 1:1,000,000 aligned zones of shorter parallel, en echelon, or conjugate linears at 1:5000,000, and shorter linears lacking any conspicuous zonal alignment at 1:250,000. Field work in the Catskills suggests that the prominent new NNE lineaments may be surface manifestations of dip slip faulting in the basement, and that it may become possible to map major joint sets over extensive plateau regions directly on the imagery. Most circular features found were explained away by U-2 airfoto analysis but several remain as anomalies. Visible glacial features include individual drumlins, drumlinoids, eskers, ice-marginal drainage channels, glacial lake shorelines, sand plains, and end moraines.

Isachsen, Y. W.↗
NASA NTRS1972

Study of modal coupling procedures for the shuttle: A matrix method for damping synthesis

The damping method was applied successfully to real structures as well as analytical models. It depends on the ability to determine an appropriate modal damping matrix for each substructure. In the past, modal damping matrices were assumed diagonal for lack of being able to determine the coupling terms which are significant in the general case of nonproportional damping. This problem was overcome by formulating the damped equations of motion as a linear perturbation of the undamped equations for light structural damping. Damped modes are defined as complex vectors derived from the complex frequency response vectors of each substructure and are obtained directly from sinusoidal vibration tests. The damped modes are used to compute first order approximations to the modal damping matrices. The perturbation approach avoids ever having to solve a complex eigenvalue problem.

Hasselman, T. K.↗
NASA NTRS1974

Estimate of heat fluxes on the subjacent surface (according to data from synoptic analysis)

Several methods of estimating heat fluxes from nonadiabatic sources distributed over a subjacent surface were discussed. Data calculated by synoptic analysis for the entire Northern Hemisphere from aerological soundings at the AT500 and AT400 level, along with the temperature of the subjacent surfaces, were used. A polytropic model of the atmosphere is used in order to avoid the problems posed by the lack of any complete theory of heat transfer in the lower atmosphere.

Nagurnyy, A. P.↗
NASA NTRS1974

The economic value of remote sensing of earth resources from space: An ERTS overview and the value of continuity of service. Volume 10: Industry

The economic benefits of an ERS system in the area of industrial resources are discussed. Contributions of ERTS imagery to the improvement of shipping routes, detection of previously unknown and potentially active faults in construction areas, and monitoring industrial pollution are described. Due to lack of economic research concerning the subject of ERS applications in this resource area the benefit estimations reported are regarded as tentative and preliminary.

Lietzke, K. R.↗
NASA NTRS1974

The interior structure of Jupiter (consequences of Pioneer 10 data)

Models of the Jovian interiors are based on theoretical equations of state of hydrogen and helium supported by a few experimental points and an observed parameter such as oblateness, gravitational coefficients, heat emission, and magnetic fields. The models fall into three categories: (1) those which assume a uniform and rather low H2/He ratio throughout the planet, (2) those in which this ratio is solar and thus higher and (3) those which take into account the lack of complete miscibility of the two elements in the condensed state. Recent values of the observed parameters obtained by Pioneer 10 permit improvements of the first two models but also pose new questions. In the first category of models the new data indicate that the amount of hydrogen has to be increased, while in the solar models which have a heavy core (made of SiO2, MgO, Fe and Ni), the abundance of hydrogen has to be decreased, both changes pointing in the direction of incomplete miscibility present in the third category of models.

Smoluchowski, R.↗
NASA NTRS1974

Analysis of Skylab MSS data, and calibration of thermal data over Lake Monroe, Indiana

The author has identified the following significant results. The SL/4-S192 data over northern Indiana looks good. The thermal band looks very encouraging. The preliminary analysis indicates so far that it will be difficult to distinguish some land use classes because of the lack of vegetation. Preliminary analysis of the thermal band in particular indicates that there appears to be a correlation of the hot spots in the data over the Ft. Wayne, Indiana area and its industrial centers.

Silva, L. F.↗
NASA NTRS1974

An interdisciplinary analysis of multispectral satellite data for selected cover types in the Colorado mountains, using automatic data processing techniques

The author has identified the following significant results. In the San Juan Mountains there exists a group of structural and topographic features which suggest a common origin. The relative positions of the San Juan Depression with the Silverton and Lake City Calderas indicate they are possibly on the edge of a large circular feature. Comparison with the 1:250,000 scale Durango Geologic Map reveals a series of radial and arcuate faults concentric with the major circular feature. Such a fracture pattern implies that the circular feature may represent the extent of a major domal uplift in the area. The uplift was very likely due to the sub-crustal emplacement of the parent magma of the San Juan volcanics and intrusives. The broad doming led to the formation of a zone of tensional ring fractures which acted as conduits of release for the magma and the eventual development of the various calderas. The ring fracturing was probably incomplete with hinging occurring in the southern and southwestern portions of the dome accounting for the lack of development of caldera structures in that portion of the area.

Hoffer, R. M.↗
NASA NTRS1975

ATM CMG bearing failure analysis

The cause or causes for the failure of ATM CMG S/N 5 (Skylab 1) and the anomalies associated with ATM CMG S/N 6 (Skylab 2) were investigated. Skylab telemetry data were reviewed and presented in the form of parameter distributions. The theory that the problems were caused by marginal bearing lubrication was studied along with the effects of orbital conditions on lubricants. Bearing tests were performed to investigate the effect of lubricant or lack of lubricant in the ATM CMG bearings and the dispersion and migration of the lubricant. The vacuum and weightless conditions of space were simulated in the bearing tests. Analysis of the results of the tests conducted points to inadequate lubrication as the predominant factor causing the failure of ATM CMG S/N 5 (Skylab 1) and the anomalies associated with ATM CMG S/N 6 (Skylab 2).

Source record↗
NASA NTRS1975

Periodic variations stratospheric temperature from 20-65 km at 80 deg N to 30 deg S

Results for a seasonally varying diurnal tide in temperature at Churchill are presented, and possible significant aliasing of longer period waves by this tide is discussed. A diurnal tide whose amplitude and phase are coherent throughout the year is found to have little effect on periodic amplitudes other than the long-term mean, because most rocketsonde observations are taken near the same local time each day. Errors in periodic components arising from lack of solar radiation corrections are found to be largest for the long-term mean with a small influence noted in the annual wave's amplitude. Spatial variations of the amplitudes and phases of long-period waves are examined through the use of height-latitude sections, 20-65 km, at 80 deg N to 30 deg S. The quasi-biennial oscillation and semiannual waves have tropical maxima of 2 and 3C near 30 and 40 km respectively. The annual wave's maximum is over 22C near 45 km at 70 deg N and the terannual wave's maximum is over 6C near 55 km at 80 deg N. The semiannual wave has to polar maxima: 7C near 75 deg N at 32 km and 3C above 60 km north of 35 deg N.

Nastrom, G. D.↗
NASA NTRS1974

Stress anisotropy and concentration effects in high pressure measurements

Sodium chloride is used as an internal pressure standard in high pressure research. Possible corrections are discussed which are needed in the calibration of this standard due to the independent effects of stress anisotropy and stress concentration in pressure vessels. The first is due to the lack of a truly hydrostatic state of stress in solid state pressure vessels. The second is due to the difference in the compressibilities between the pressure transmitting substances (sodium chloride) and a stiffer test specimen. These two corrections are then combined and a total correction, as a function of measured pressure, is discussed for two systems presently in use. The predicted value of the combined effect is about 5-10% of the pressure at 30 GPa.

Nelson, D. A., Jr.↗
NASA NTRS1974

Geophysical, geochemical, and geological investigations of the Dunes geothermal system, Imperial Valley, California

The Dunes anomaly is a water-dominated geothermal system in the alluvium of the Salton Trough, lacking any surface expression. It was discovered by shallow-temperature gradient measurements. A 612-meter-deep test well encountered several temperature-gradient reversals, with a maximum of 105 C at 114 meters. The program involves surface geophysics, including electrical, gravity, and seismic methods, down-hole geophysics and petrophysics of core samples, isotopic and chemical studies of water samples, and petrological and geochemical studies of the cores and cuttings. The aim is (1) to determine the source and temperature history of the brines, (2) to understand the interaction between the brines and rocks, and (3) to determine the areal extent, nature, origin, and history of the geothermal system. These studies are designed to provide better definition of exploration targets for hidden geothermal anomalies and to contribute to improved techniques of exploration and resource assessment.

Elders, W. A.↗