Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “kinetic stabilization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Interaction of eddies and mean zonal flow on Jupiter as inferred from Voyager 1 and 2 images

Voyagers 1 and 2 narrow angle frames are used to obtain displacements of features at resolutions of 130 km over time intervals of 1 Jovian rotation. It is shown that the mean zonal velocity profile does not change by a measurable amount between Voyagers 1 and 2, which is consistent with previous observations. It is also shown that the curvature of the velocity profile vanes varies with latitudes in the range from -3 beta to +2 beta. The barotropic stability criterion is violated at 10 latitudes between + and - 60 deg, and the rate of conversion of eddy kinetic energy into zonal mean kinetic energy is in the range from 1.5 to 3.0 per sq Wm for a layer 2.5 bar deep. The rate of energy conversion is more than 10% of the total infrared heat flux for Jupiter, as compared to the earth where it is only 0.1% of the infrared, which suggests that the two planets possess fundamentally different thermomechanical energy cycles.

Ingersoll, A. P.↗
NASA NTRS1983

Review of alternative fuels data bases

Based on an analysis of the interaction of fuel physical and chemical properties with combustion characteristics and indicators, a ranking of the importance of various fuel properties with respect to the combustion process was established. This ranking was used to define a suite of specific experiments whose objective is the development of an alternative fuels design data base. Combustion characteristics and indicators examined include droplet and spray formation, droplet vaporization and burning, ignition and flame stabilization, flame temperature, laminar flame speed, combustion completion, soot emissions, NOx and SOx emissions, and the fuels' thermal and oxidative stability and fouling and corrosion characteristics. Key fuel property data is found to include composition, thermochemical data, chemical kinetic rate information, and certain physical properties.

Harsha, P. T.↗
NASA NTRS1988

Current driven instabilities of an electromagnetically accelerated plasma

Quantitative measurements of the plasma instability that strongly affects the efficiency and lifetime of electromagnetic plasma accelerators were obtained. Experimental results are presented for the dispersion relations (wave phase velocities), spatial growth rates, and stability boundaries of accelerators. The measured critical wave parameters are found to agree well with theoretical predictions. A kinetic theoretical model was used to study current driven instabilities which are intrinsic to the high-current-carrying magnetized plasma of a magnetoplasmadynamic accelerator. Under certain conditions, marginally stable waves travelling almost perpendicular to the magnetic field are found which travel at a velocity equal to that of the electron current.

Kelly, A. J.↗
NASA NTRS1992

A pressure correction method for the calculation of compressible chemical reacting flows

A recently developed noniterative method for the solution of the transient fluid flow equations at all speed is extended to handle chemical reacting flows. The species conservation equations are loosely coupled into the predictor/multicorrector sequence of the solution procedure. A split-operator method separates the chemical kinetics terms from the fluid-dynamical terms, as well as an implicit differencing method enhance the numerical stability. The method was applied for turbulent diffusion flame calculations and for the analyses of high pressure, axisymmetric turbulent hypersonic nozzle flows. The diffusion flame results were compared with a similar pressure method for fast chemistry integration scheme without operator-splitting. Simulations of the nozzle flow indicated that the nonideal intermolecular effects must be included in the analysis and design of high pressure hypersonic nozzle.

Chen, Z. J.↗
NASA NTRS1991

Advances in high temperature components for AMTEC (Alkali Metal Thermal-to-Electric Converter)

The basic performance of Alkali Metal Thermal-to-Electric Converter (AMTEC) cells is well understood, and quantitative modeling of the electrode performance has been carried out. Tests have been carried out to evaluate the high temperature performance of critical AMTEC components. Progress made in understanding the relative performance of AMTEC components, such as electrodes, electrolytes, working fluids, and seals, as device operating temperature is varied is discussed. Most metallic components are especially subject to corrosion in hot liquid alkali metals containing dissolved oxides. Stability issues of AMTEC components may be addressed by life testing, accelerated testing, and modeling based on known kinetic and thermochemical data.

Williams, R. M.↗
NASA NTRS1999

Computational Study of Field Initiated Surface Reactions for Synthesis of Diamond and Silicon

This project involves using quantum chemistry to simulate surface chemical reactions in the presence of an electric field for nanofabrication of diamond and silicon. A field delivered by a scanning tunneling microscope (STM) to a nanometer scale region of a surface affects chemical reaction potential energy surfaces (PES) to direct atomic scale surface modification to fabricate sub-nanometer structures. Our original hypothesis is that the applied voltage polarizes the charge distribution of the valence electrons and that these distorted molecular orbitals can be manipulated with the STM so as to change the relative stabilities of the electronic configurations over the reaction coordinates and thus the topology of the PES and reaction kinetics. Our objective is to investigate the effect of applied bias on surface reactions and the extent to which STM delivered fields can be used to direct surface chemical reactions on an atomic scale on diamond and silicon. To analyze the fundamentals of field induced chemistry and to investigate the application of this technique for the fabrication of nanostructures, we have employed methods capable of accurately describing molecular electronic structure. The methods we employ are density functional theory (DFT) quantum chemical (QC) methods. To determine the effect of applied bias on surface reactions we have calculated the QC PESs in various applied external fields for various reaction steps for depositing or etching diamond and silicon. We have chosen reactions which are thought to play a role in etching and the chemical vapor deposition growth of Si and diamond. The PESs of the elementary reaction steps involved are then calculated under the applied fields, which we vary in magnitude and configuration. We pay special attention to the change in the reaction barriers, and transition state locations, and search for low energy reaction channels which were inaccessible without the applied bias.

Musgrave, Charles Bruce↗
DOE OSTI2024

Electrochemical Manipulation and Radiolytic Evaluation of Organic Phase Neptunium

Post for LDRD Annual Poster Session Under envisioned used nuclear fuel reprocessing conditions, neptunium (Np) is present in a mixture of extractable Np(IV)/Np(VI) and inextractable Np(V) species, the distribution of which is dependent on several factors that lead to the unintentional partitioning of Np into various phases and product streams, reducing process and cost efficiency. With this in mind, we tested an innovative approach to precisely control the oxidation state distribution of Np using novel, high surface area, optically transparent, ligand modified tin-doped indium oxide electrodes (LMEs). These proof-of-concept experiments employed a variety of radiation and electrochemistry (echem) techniques to determine: electrode radiation stability; aqueous echem behavior of Np at nITO|P3 electrode surfaces; radiation-induced Np-extractant reaction kinetics; and non-aqueous echem of Np in diethylhexyl butyramide (DEHBA) solutions.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2020

Arsenic stabilization performance of a novel starch-modified Fe-Mn binary oxide colloid

Arsenic (As) is an environmentally hazardous contaminant and can be a serious threat to human health. In China, remediation needs for a large number of As-contaminated sites renders a strong demand for efficient remedial reagents and cost effective approaches. In this study, a novel starch-modified Fe-Mn binary oxide (SFM), an amorphous colloidal material, has been synthesized as a remedial reagent and its As stabilization performance has been evaluated. A set of laboratory batch experiments were carried out by directly adding SFM of different dosages into three contaminated soils. Results demonstrated that SFM could transform As in soil from non-specifically and specifically sorbed fractions to the more stable form bounded to amorphous iron hydrous oxides, thus reducing the As concentration in TCLP leachates by 42.0-93.2%. Results from adsorption tests and microscopic analysis indicated that the interactions between SFM and As are mainly controlled by adsorption, oxidation, and precipitation processes. SFM has abundant surface hydroxyl groups, with excellent adsorption properties for both As(V) and As(III), with the maximum adsorption capacities of 160.63 and 284.64 mg/g respectively at pH 7.0. The adsorption process closely fitted pseudo second-order kinetics and Freundlich isotherm model. SFM could increase soil Eh and oxidize As(III) to As(V), which facilitated the As stabilization in soilColloidal iron-based material directly used for stabilization in As contaminated soils is reported here for the first time. Starch modification improves both the reactivity and mobility of SFM in soil. Our findings propose an efficient and convenient reagent for As remediation in soil.

Yan, Xiulan↗
DOE OSTI2024

Structure preserving transport stabilized compatible finite element methods for magnetohydrodynamics

Here, we present compatible finite element space discretizations for the ideal compressible magnetohydrodynamic equations. The magnetic field is considered both in div- and curl-conforming spaces, leading to a strongly or weakly preserved zero-divergence condition, respectively. The equations are discretized in space such that transfers between the kinetic, internal, and magnetic energies are consistent, leading to a preserved total energy. We also discuss further adjustments to the discretization required to additionally achieve magnetic helicity preservation. Finally, we describe new transport stabilization methods for the magnetic field equation which maintain the zero-divergence and energy conservation properties, including one method which also preserves magnetic helicity. The methods' preservation and improved stability properties are confirmed numerically using a steady state and a magnetic dynamo test case.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

High-Temperature-Performance Cyanate Ester Composites with Carboranes

Cyanate ester (CE) is an important class of materials among high-temperature performance thermosets. It is used in aerospace launch vehicles, heat sinks, booms, and trusses of satellites etc. due to its high glass transition temperatures (>220°C), excellent thermal stability, and low flammability. Current approaches to improve the thermal stability of CE include incorporation of siloxanes or phosphorus- based flame retardants (PFRs). In this work, we have explored boron-based hydroxy (PD) and epoxy (EP) functionalized carborane additives to improve the thermal properties of CE. Carborane fillers were solvent blended at various mass loadings in the resin and cured to study their effect on thermal properties. PD and EP carboranes react with CE to form iminocarbonate and oxazolidinone linkages respectively. Cure kinetics studies at different wt% loadings explained that carboranes catalyze the curing reaction by reducing curing activation energy by about 54% and 26% for 10 wt% loadings of PD and EP carboranes respectively. In addition, carborane-filled cyanate ester (CE) nanocomposites demonstrate an exceptionally high thermal stability as compared to the pristine resin in air and inert environment. Our thermogravimetric analysis (TGA) experiments show that the ultimate char yield of the resin can be increased from 0% to as high as 76% and 82% with 30 wt% PD and EP carborane loading respectively at 1000 °C in air. The initial degradation temperature T d;5 of the composites decreased with increasing carborane loadings in both air and argon. For instance, T d;5 for CE was 465 and 471.6 °C in argon and air while that for P20 was 437.4 and 452.1 °C. Modulated TGA studies gave evidence of the effect of carboranes on degradation kinetics and the mechanism of the resin in air and inert environment. The effect of bonding between carboranes and CE at various loadings on the thermal expansion of the matrix was also studied using Thermomechanical Analyzer (TMA). PD carborane reduced the T g for P20 to about 225 °C while CE had T g >350 °C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Bridging Atomic Solvation Environment with Electrochemical Properties for the Bis(trifluoromethylsulfonyl)imide-Based Divalent Cation Electrolytes for the Next-Generation Energy Storage Systems

A deep molecular-level understanding of the multivalent electrolyte and its correlation with the electrochemical properties is crucial for designing optimized electrolytes for next-generation rechargeable batteries. Comprehensive knowledge of the atomic level of the solvation structure and its connection with electrochemical stability and ion transport properties is especially critical. However, the interaction of these three components coupled with clear atomistic insights is lacking in the literature. Here, our current contribution evaluates representative electrolytes with the bis(trifluoromethanesulfonyl)imide (TFSI) anions for multivalent cations of Mg, Ca, and Zn, at different ionic conditions with and without a cosolvated environment in ether-based solvent. Two critical problems are investigated: first, resolving the solvation structures in the electrolyte solutions as a function of concentrations through pair distribution function analysis and the corresponding electrochemical transport properties; second, unmasking the quantitative correlation of the atomistic environment with both electrochemical kinetics and cation dependence. We discovered that the magnesium- and calcium-based electrolytes display versatile coordination lengths but poor average anodic stability due to ion pairing with TFSI - . On the contrary, the zinc-based electrolytes show the shortest solvent coordination lengths, shielding the Zn cation from rigid solvent interactions and resulting in the highest anodic stabilities. Calcium-based electrolytes exhibit the longest and most concentration-independent coordination lengths. This work provides valuable insights into the molecular structural and electrochemical features of diverse multivalent electrolyte systems with cations in various solvation environments, emphasizing the importance of the solvation structure and construction in designing high-performance electrolytes.

cation coordination↗
DOE OSTI2025

Revisiting the Impact of Anion Selection on Sulfur Redox Reaction Kinetics for High Sulfur Loading Lithium–Sulfur Batteries

Lithium bis(trifluoromethane)sulfonimide (LiTFSI) is widely used in lithium–sulfur (Li–S) battery electrolytes due to its stability with lithium polysulfides (LiPSs) and moderate compatibility with lithium metal anodes. However, LiTFSI presents environmental concerns due to its association with per- and polyfluoroalkyl substances (PFAS), which are environmentally persistent and potentially toxic, raises sustainability concerns. This research also reveals that LiTFSI limits sulfur redox reactions (SRRs), making it less effective than other lithium salts. Additionally, some salts previously considered incompatible with Li-S systems due to their reactivity with LiPSs are demonstrated to perform effectively. For the first time, a protective, porous cathode electrolyte interphase (CEI) formed in situ through reactions between salt anions and LiPS is reported. The cells delivered a high specific capacity of 1230.8 mAh g −1 at 0.05 C with a sulfur loading of ≈6 mg cm −2 , limited lithium anode, maintaining a capacity retention of 76.2% after 100 cycles at 0.1 C. Under harsh conditions, such as high sulfur loading, lean electrolyte conditions (3 µL mg −1 ), and in anode-free cells, the cells continued to deliver outstanding capacity. This work provides valuable guidelines for understanding and selecting lithium salts to advance electrolyte design for Li–S batteries.

high loading batteries↗
DOE OSTI2022

Structural Changes during the Conversion Reaction of Tungsten Oxide Electrodes with Tailored, Mesoscale Porosity

In-plane tungsten oxide nanostructures, including hexagonally patterned cylinders and holes in a matrix, were fabricated via sequential infiltration synthesis (SIS) on self-assembled block copolymer templates. Using the tailored morphology and porosity of these model electrodes with in situ grazing incidence small angle X-ray scattering, the intrinsic structural change of nanoscale active materials during the conversion reaction of WO 3 + 6Li ↔ W + 3 Li 2 O was investigated at controlled electrochemical conditions. Reversible electrode volume expansion and contraction was observed during lithiation and delithiation cycles, respectively. The potential where electrode’s thickness expansion started was ~1.6 V, which is close to thermodynamically expected one for conversion reaction of WO 3 with lithium (1.65 V). The temporal evolution of the electrode volume at constant electrode potentials revealed high overpotential for bulk lithiation and slow conversion reaction kinetics, despite the tailored porosity of the SIS electrodes. Oxide cylinders showed smaller overall electrode thickness change, likely due to unconstrained lateral volume change, as compared to a matrix with holes. On the other hand, better connectivity and guided volume change of the latter electrode morphology provided improved cycling stability. Additionally, heterogeneity in an electrode, from internal pores and density gradients, was found to aggravate the fragmentation of the electrode during conversion reaction. Insights into oxide conversion reaction kinetics and the relationship between electrode mesostructure and cycling behavior obtained from this study can help guide the more rational design of conversion electrode for high performing batteries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Excitation of fishbone-like mode in tokamaks due to bounce resonances of trapped thermal ions

When the drift kinetic effect of thermal ions is taken into account, a high-frequency fishbone-like mode (FLM) is found to be driven unstable by trapped thermal ions (TTIs) in tokamak plasmas, according to self-consistent magneto-hydrodynamic (MHD)-kinetic hybrid modeling utilizing the MARS-K code [Liu et al., Phys. Plasmas 15, 112503 (2008)] as well as an analytic theory. It is found that, similar to energetic particles, TTIs can also stabilize the internal kink mode, whereas the FLM is excited when the effective beta of TTIs exceeds a threshold value. The real frequency of the FLM is comparable to the bounce frequency of TTIs. The mode structure of the FLM can be significantly different from the conventional step-like function for the associated plasma radial displacement. This drift kinetic induced modification of the mode structure near the q = 1 surface is captured by non-perturbative MHD-kinetic hybrid computations with MARS-K. Furthermore, the FLM can only be triggered by TTIs at sufficiently high thermal temperatures. Both the FLM and the internal kink can be stabilized by sufficiently fast plasma toroidal rotation and parallel sound wave damping. These two conditions of high thermal temperature and (fast) flow stabilization, though making it challenging to observe the TTI-driven FLM in present day experiments, are favorable for the mode excitation in future reactor scale devices.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Confinement-Controlled Rearrangements in Dioxolane Upgrading on H-ZSM-5 Revealed by Periodic DFT

Zeolitic Brønsted acid sites catalyze carbocation rearrangements central to upgrading biomass-derived oxygenates. Here we elucidate the mechanism of dioxolane conversion to methyl ethyl ketone and isobutanal on H-ZSM-5 using periodic density functional theory on the MFI model, complemented by ab initio molecular dynamics to probe confinement effects. Dioxolane adsorption at the Brønsted site is followed by protonation-assisted ring opening to form an oxocarbenium intermediate stabilized by the deprotonated framework. From this common intermediate, selectivity is governed by two competing rearrangements, namely, the 1,2-hydride shift with a free-energy barrier of 18.05 kcal mol –1 at 498 K leading toward MEK, and the 1,2-methyl shift with a higher barrier of 25.40 kcal mol –1 leading toward isobutanal. The hydride-shift channel is kinetically preferred over the methyl-shift channel, lowering the isobutanal/MEK ratio below the 3:1 limit expected for equal branching. Adsorption thermodynamics further indicate stronger stabilization of MEK than isobutanal within ZSM-5 channels, suggesting that confinement-controlled binding can bias product distributions in addition to intrinsic rearrangement barriers. These results highlight how Brønsted acidity and pore confinement jointly shape the rearrangement landscape in MFI zeolites.

adsorption↗
DOE OSTI2022

Augmented reduced order models for turbulence

The authors introduce an augmented-basis method (ABM) to stabilize reduced-order models (ROMs) of turbulent incompressible flows. The method begins with standard basis functions derived from proper orthogonal decomposition (POD) of snapshot sets taken from a full-order model. These are then augmented with divergence-free projections of a subset of the nonlinear interaction terms that constitute a significant fraction of the time-derivative of the solution. The augmenting bases, which are rich in localized high wavenumber content, are better able to dissipate turbulent kinetic energy than the standard POD bases. Several examples illustrate that the ABM significantly out-performs L 2 -, H 1 - and Leray-stabilized POD ROM approaches. The ABM yields accuracy that is comparable to constraint-based stabilization approaches yet is suitable for parametric model-order reduction in which one uses the ROM to evaluate quantities of interests at parameter values that differ from those used to generate the full-order model snapshots. Several numerical experiments point to the importance of localized high wavenumber content in the generation of stable, accurate, and efficient ROMs for turbulent flows.

Kaneko, Kento↗
DOE OSTI2021

H 2 O-assisted O 2 reduction by H 2 on Pt and PtAu bimetallic nanoparticles: Influences of composition and reactant coverages on kinetic regimes, rates, and selectivities

Hydrogen peroxide (H 2 O 2 ) can replace hazardous oxidants in industrial processes but is currently too expensive for many such applications. While direct synthesis of H 2 O 2 (H 2 + O 2 → H 2 O 2 ) may reduce costs in comparison to incumbent technology, current catalysts lack the requisite stability and selectivity. Here, we examine the direct synthesis of H 2 O 2 on bimetallic Pt 1 Au x (0 ≤ x ≤ 230) and Pt catalysts at steady-state in pure water and relate kinetic parameters for H 2 O 2 and H 2 O formation to possible active site structures informed by complementary characterization methods. X-ray photoelectron spectra show significant Pt surface enrichment compared to the bulk composition. Analysis of infrared spectra of mixed monolayers of 12 CO* and 13 CO* indicate that Pt and Au form substitutional surface alloys. The Pt 1 Au x nanoparticles with the greatest mole fractions of Au predominantly expose Pt monomers (i.e., isolated Pt atoms), yet Pt atoms exposed upon all these nanoparticles possess electronic structures distinct from bulk Pt. Despite these differences, rate measurements are consistent with product formation through proton-electron transfer pathways for all Pt 1 Au x catalysts. In situ XAS indicate that Pt remains metallic during H 2 O 2 synthesis. Under the most oxidizing conditions, selectivities toward H 2 O 2 increase strongly with the Au to Pt ratio from 2% for monometallic Pt to 85% for Pt 1 Au 170 . However, selectivities are similar among all catalysts within reducing conditions. Comparisons of apparent activation enthalpies for the formation of H 2 O 2 and H 2 O across these catalysts and the range of conditions suggest that Pt monomers within Au provide the greatest selectivities for H 2 O 2 formation, because these active sites present high barriers for O-O bond rupture. Further, selectivities decrease with increasing ratios of H 2 to O 2 pressures, because Pt atoms aggregate and form oligomers that readily dissociate dioxygen intermediates. The combined use of spectroscopy, kinetics, and concepts employed in reaching these conclusions take inspiration from the legacy of Prof. Michel Boudart, and specifically his elegant methods for interrogating bimetallic catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Efficient separation of xylene isomers by using a robust calcium-based metal–organic framework through a synergetic thermodynamically and kinetically controlled mechanism

Adsorptive separation of physically and chemically similar molecules and understanding the underlying host–guest interactions at the molecular level are of significant scientific and practical importance. Here we report the development of a novel calcium-based metal–organic framework, formulated as Ca 3 (Htcpp) 2 (H 4 tcpp = 2,3,5,6-tetrakis(4-carboxyphenyl)-pyrazine) featuring microporosity and high stability. This compound shows distinct adsorption behavior toward xylene isomers and is capable of separating them efficiently at an industrially relevant temperature. The selective adsorption is attributed to a synergetic thermodynamic and kinetic effect. Here, the host–guest interactions were probed directly by single-crystal X-ray diffraction analysis and the adsorption affinity was evaluated through computational molecular simulations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗