Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “jet flow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

New developments in blown flap noise technology

The noise technology relating to blown-flap systems is reviewed. There are three general sources of noise: turbomachinery, airframe, and the interaction noise of the jet blowing on the flaps. The latter noise-source area is the most critical and the main subject dicussed. Characteristics of lower surface blown and upper surface blown systems are described, including noise spectra, directivity, jet velocity characteristics, aircraft geometric variation effects, and aircraft forward speed effects. Noise reduction concepts are described, including slowing down the jet flow field by devices and engine cycle modifications, structural geometry and shielding modifications, local flow field modifications of the passive and active type, and the absorption of noise. It is concluded that, while there has been considerable progress in the past several years, low noise characteristics in blown flap aircraft must be largely built in by better application of low noise principles during the design.

Gibson, J. S.↗
NASA NTRS1977

Analysis and documentation of QCSEE (Quiet Clean Short-haul Experimental Engine) over-the-wing exhaust system development

A static scale model test program was conducted in the static test area of the NASA-Langley 9.14- by 18.29 m(30- by 60-ft) Full-Scale Wind Tunnel Facility to develop an over-the-wing (OTW) nozzle and reverser configuration for the Quiet Clean Short-Haul Experimental Engine (QCSEE). Three nozzles and one basic reverser configuration were tested over the QCSEE takeoff and approach power nozzle pressure ratio range between 1.1 and 1.3. The models were scaled to 8.53% of QCSEE engine size and tested behind two 13.97-cm (5.5-in.) diameter tip-turbine-driven fan simulators coupled in tandem. An OTW nozzle and reverser configuration was identified which satisfies the QCSEE experimental engine requirements in terms of nozzle cycle area variation capability and reverse thrust level, and provides good jet flow spreading over a wing upper surface for achievement of high propulsive lift performance.

Ammer, R. C.↗
NASA NTRS1981

Stochastic analysis of spectral broadening by a free turbulent shear layer

The effect of the time-varying shear layer between a harmonic acoustic source and an observer on the frequency content of the observed sound is considered. Experimental data show that the spectral content of the acoustic signal is considerably broadened upon passing through such a shear layer. Theoretical analysis is presented which shows that such spectral broadening is entirely consistent with amplitude modulation of the acoustic signal by the time-varying shear layer. Thus, no actual frequency shift need be hypothesized to explain the spectral phenomenon. Experimental tests were conducted at 2, 4, and 6 kHz and at free jet flow velocities of 10, 20, and 30 m/s. Analysis of acoustic pressure time histories obtained from these tests confirms the above conclusion, at least for the low Mach numbers considered.

Hardin, J. C.↗
NASA NTRS1981

Shock associated noise reduction from inverted-velocity-profile coannular jets

Acoustic measurements show that the shock noise from the outer stream is virtually eliminated when the inner stream is operated at a Mach number just above unity, regardless of all the other jet operating conditions. At this optimum condition, the coannular jet provides the maximum noise reduction relative to the equivalent single jet. The shock noise reduction can be achieved at inverted-as well as normal-velocity-profile conditions, provided the coannular jet is operated with the inner stream just slightly supersonic. Analytical models for the shock structure and shock noise are developed indicate that a drastic change in the outer stream shock cell structure occurs when the inner stream increases its velocity from subsonic to supersonic. At this point, the almost periodic shock cell structure of the outer stream nearly completely disappears the noise radiated is minimum. Theoretically derive formulae for the peak frequencies and intensity scaling of shock associated noise are compared with the measured results, and good agreement is found for both subsonic and supersonic inner jet flows.

Tanna, H. K.↗
NASA NTRS1981

On the mixing of a rectangular jet

Hot-wire measurements in an incompressible rectangular jet, issuing into a quiet environment at ambient conditions, are presented. A blow-down-type air supply system was used to provide the airflow to a cylindrical settling chamber 1.75 m in length and 0.6 m in diameter. The measurements were made with constant-temperature anemometers in conjunction with linearizers. The two signals from the linearizers were sent through a sum and difference unit which was calibrated from dc to 100 kHz. The distributions of mean velocity and the turbulence shear stresses were measured in the two central planes of the jet stations up to 115 widths downstream of the nozzle exit. Three distinct regions characterized the jet flow field: a potential core origin, a two-dimensional-type region, and an axisymmetric type region. The onset of the second region appeared to be at a location where the shear layers separated by the short dimension of the nozzle meet; and the third region occurred at a downstream location where the two shear layers from the short edges of the nozzle meet. In the central plane, similarity was found both in the mean velocity and shear stress profiles beyond 30 widths downstream of the nozzle exit; profiles of rms velocity showed similarity in the second, but not the third region.

Krothapalli, A.↗
NASA NTRS1983

Effect of Liquid Droplets on Turbulence Structure in a Round Gaseous Jet

A second-order model which predicts the modulation of turbulence in jets laden with uniform size solid particles or liquid droplets is discussed. The approach followed is to start from the separate momentum and continuity equations of each phase and derive two new conservation equations. The first is for the carrier fluid's kinetic energy of turbulence and the second for the dissipation rate of that energy. Closure of the set of transport equations is achieved by modeling the turbulence correlations up to a third order. The coefficients (or constants) appearing in the modeled equations are then evaluated by comparing the predictions with LDA-measurements obtained recently in a turbulent jet laden with 200 microns solid particles. This set of constants is then used to predict the same jet flow but laden with 50 microns solid particles. The agreement with the measurement in this case is very good.

Elghobashi, S. E.↗
NASA NTRS1983

Axial vane-type swirler performance characteristics

The performance of an axial vane-type swirler was investigated to aid in computer modeling of gas turbine combustor flowfields and in evaluation of turbulence models for swirling confined jet flow. The swirler studied is annular with a hub-to-swirler diameter ratio of 0.25 and ten adjustable vanes of pitch-to-chord ratio 0.68. Measurements of time-mean axial, radial, and tangential velocities were made at the swirler exit plane using a five-hole pitot probe technique with computer data reduction. Nondimensionalized velocities from both radial and azimuthal traverses are tabulated and plotted for a range of swirl vane angles phi from 0 to 70 degrees. A study was done of idealized exit-plane velocity profiles relating the swirl numbers S and S' to the ratio of maximum swirl and axial velocities for each idealized case, and comparing the idealized swirl numbers with ones calculated from measured profiles.

Sander, G. F.↗
NASA NTRS1985

Langley Mach 4 scramjet test facility

An engine test facility was constructed at the NASA Langley Research Center in support of a supersonic combustion ramjet (scramjet) technology development program. Hydrogen combustion in air with oxygen replenishment provides simulated air at Mach 4 flight velocity, pressure, and true total temperature for an altitude range from 57,000 to 86,000 feet. A facility nozzle with a 13 in square exit produces a Mach 3.5 free jet flow for engine propulsion tests. The facility is described and calibration results are presented which demonstrate the suitability of the test flow for conducting scramjet engine research.

Earl H Andrews Jr.↗
NASA NTRS1984

On the relationship between broadband shock associated noise and screech tones

It is recognized that the three principal components of the noise of shock containing supersonic jets, namely, the dominant part of turbulent mixing noise, the broadband shock associated noise and the screech tones are all generated directly by the large scale turbulence structures/instability waves of the jet flow. In this paper the relationship between broadband shock associated noise and screech tones is examined. It is shown that from the spectral characteristics point of view, the screech tones may be regarded as special cases of broadband shock associated noise. Theoretical calculations for the peak frequencies of broadband shock associated noise and the fundamental frequencies of stable screech tones are carried out. The calculated results are found to agree favorably with experimental measurements.

Tam, C. K. W.↗
NASA NTRS1985

Effects of rotation on impingement cooling of turbine blades

The effects of rotation on impingement cooling of turbine blades were studied experimentally as a specialized facility at M.I.T. A foil heated resistively was cooled by a jet flow on one side and temperature monitored on the other. Rotating the blade limits the heat transfer path to conduction through the support structure and radiation. IR radiometry furnishes the temperature distributions on the chamber wall, permitting the internal heat transfer coefficient to be measured. The heat transfer efficiency has been found to fall as much as 30 percent as rotational speed increases. The conditions observed confirm the significance of rotational effects, particularly with regard to potential early blade failure.

Kreatsoulas, J. C.↗
NASA NTRS1985

Vortex breakdown simulation

A vortex breakdown was simulated by the vortex filament method, and detailed figures are presented based on the results. Deformations of the vortex filaments showed clear and large swelling at a particular axial station which implied the presence of a recirculation bubble at that station. The tendency for two breakdowns to occur experimentally was confirmed by the simulation, and the jet flow inside the bubble was well simulated. The particle paths spiralled with expansion, and the streamlines took spiral forms at the breakdown with expansion.

Nakamura, Y.↗
NASA NTRS1987

Current driven weak double layers

Double layers in plasmas can be created by different means. For example, a potential difference forms between two plasmas with different temperatures, in a plasma jet flowing along a converging magnetic field, in a quiescent plasma submitted to an external difference of potential, or in a turbulent plasma carrying an electric charge. The first three cases can be current-free, but not necessarily, although the numerical simulations were made under such conditions for the first two points. Apart from the third case, which is mainly of interest for laboratory experiments, these double layers are good candidates for accelerating the auroral electrons to the few kiloelectron volts observed.

Chanteur, Gerard↗
NASA NTRS1986

Multiple-scale turbulence model in confined swirling jet predictions

A recently developed multiple-scale turbulence model which attempts to circumvent the deficiencies of earlier models by taking nonequilibrium spectral energy transfer into account is presented. The model's validity is tested by predicting the confined swirling coaxial jet flow in a sudden expansion. It is noted that, in order to account for anisotropic turbulence, a full Reynolds stress model is required.

Chen, C. P.↗
NASA NTRS1986

Proposed relationship between broadband shock associated noise and screech tones

It is recognized that the three principal components of the noise of shock containing supersonic jets, namely, the dominant part of turbulent mixing noise, the broadband shock associated noise and the screech tones are all generated directly by the large scale turbulence structures/instability waves of the jet flow. In this paper the relationship between broadband shock associated noise and screech tones is examined. It is shown that from the spectral characteristics point of view, the screech tones may be regarded as special cases of broadband shock associated noise. Theoretical calculations for the peak frequencies of broadband shock associated noise and the fundamental frequencies of screech tones are carried out. These calculations are free from empirical constants. The calculated results are found to agree favorably with experimental measurements.

Tam, C. K. W.↗
NASA NTRS1987

Spectral determination of nitrogen vibrational temperatures

A technique for determining the vibrational temperature of nitrogen molecules is found from the emission of the N2 first positive spectrum. The technique involves calculating wavelength integrals of portions of the emission spectrum associated with transitions from the ststes B3Pi(g)(v-prime) to A3 Sigma(u +)(v-double prime) where Delta = 2, 3, etc. Ratios of the integrated intensities are then correlated with vibrational temperature. The dependence of the technique on rotational temperature is considered and less dependence is obtained if the overlap between Delta v-regions is accounted for. The technique is applied to the shock layer of a blunt body in an arc jet flow. The N2(1+) spectrum is measured in the shock layer to obtain the intensity integral ratios. From these ratios estimates of the vibrational temperature are found from the correlation which agree quite well with calculated temperatures in the shock layer flow.

Blackwell, Harvel E.↗
NASA NTRS1987

Gravity waves and convection in Colorado during July 1983

The dynamics of gravity-wave/convective-cell interaction is studied using NOAA data collected in NE Colorado during July and August 1983. The pressure fields measured with microbarographs, the tropospheric wind profiles obtained with a UHF wind profiler radar, and precipitation data collected with a 10-cm weather radar for four events (A, B, C, and D) are analyzed. The four disturbances are detected through a substantial depth of the troposphere. It is observed that in event A the wave and convective cells appear to be locked together; in event B, the wave and convective cells commence about the same time, but the wave velocities differ from the cell velocities; and in events C and D, the waves move faster than the maximum wind in the jet and faster than the convective cells. It is suggested that events A and B are generated by wind shear in the jet stream, and the excitation of events C and D depends on mechanisms such as vertical convective motion and acceleration in the jet flow.

Einaudi, F.↗
NASA NTRS1987

Stochastic model theory of broadband shock associated noise from supersonic jets

A method based on the work of Tam and Tanna (1982) for calculating the near field noise spectrum and the spatial distribution of broadband shock associated noise from supersonic jets is proposed. Multiple-scales expansion is used to decompose the quasi-periodic shock cells into time-independent waveguide modes of the jet flow, and the interaction of the instability waves with each of the waveguide modes is shown to generate unsteady disturbances which become part of the broadband shock associated noise when radiated to the far field. The observed broadband shock associated noise is composed of a superposition of the various distinct spectra of the different waveguide modes, and the multispectra can be easily identified in many of the existing far and near field noise measurements.

Tam, C. K. W.↗
NASA NTRS1988

K-epsilon turbulence model assessment with reduced numerical diffusion for coaxial jets

A numerical study has been conducted to evaluate the performance of the k-epsilon turbulence model for axisymmetric, unconfined, swirling, and nonswirling coaxial jet flows. Two lower order schemes, hybrid and power-law, and two higher order schemes, flux-spline and bounded skew upwind differencing, were employed in this investigation. The predicted results indicate that the higher order numerical schemes have greater potential for future model improvements and complex flow calculations in terms of storage, accuracy, and execution time. For the nonswirling flow, computations using an algebraic stress model have also been presented.

Nikjooy, M.↗