SEARCH · Engineering Papers

Results for “incompressible flow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

All sources NASA NTRS DOE OSTI

NASA NTRS1986

Improved Skin Friction Interferometer

An improved system for measuring aerodynamic skin friction which uses a dual-laser-beam oil-film interferometer was developed. Improvements in the optical hardware provided equal signal characteristics for each beam and reduced the cost and complexity of the system by replacing polarization rotation by a mirrored prism for separation of the two signals. An automated, objective, data-reduction procedure was implemented to eliminate tedious manual manipulation of the interferometry data records. The present system was intended for use in two-dimensional, incompressible flows over a smooth, level surface without pressure gradient, but the improvements discussed are not limited to this application.

Westphal, R. V.↗

NASA NTRS1986

Multiple grid problems on concurrent-processing computers

Three computer codes were studied which make use of concurrent processing computer architectures in computational fluid dynamics (CFD). The three parallel codes were tested on a two processor multiple-instruction/multiple-data (MIMD) facility at NASA Ames Research Center, and are suggested for efficient parallel computations. The first code is a well-known program which makes use of the Beam and Warming, implicit, approximate factored algorithm. This study demonstrates the parallelism found in a well-known scheme and it achieved speedups exceeding 1.9 on the two processor MIMD test facility. The second code studied made use of an embedded grid scheme which is used to solve problems having complex geometries. The particular application for this study considered an airfoil/flap geometry in an incompressible flow. The scheme eliminates some of the inherent difficulties found in adapting approximate factorization techniques onto MIMD machines and allows the use of chaotic relaxation and asynchronous iteration techniques. The third code studied is an application of overset grids to a supersonic blunt body problem. The code addresses the difficulties encountered when using embedded grids on a compressible, and therefore nonlinear, problem. The complex numerical boundary system associated with overset grids is discussed and several boundary schemes are suggested. A boundary scheme based on the method of characteristics achieved the best results.

Eberhardt, D. S.↗

NASA NTRS1984

Lifting surface theory for a helicopter rotor in forward flight

A lifting surface theory was developed for a helicopter rotor in forward flight for compressible and incompressible flow. The method utilizes the concept of the linearized acceleration potential and makes use of the vortex lattice procedure. Calculations demonstrating the application of the method are given in terms of the lift distribution on a single rotor, a two-bladed rotor, and a rotor with swept-forward and swept-back tips. In addition, the lift on a rotor which is vibrating in a pitching mode at 4/rev is given. Compressibility effects and interference effects for a two-bladed rotor are discussed.

Tai, H.↗

NASA NTRS1985

Application of a fractional-step method to incompressible Navier-Stokes equations

A numerical method for computing three dimensional, time dependent incompressible flows is presented. The method is based on a fractional step, or time-splitting, scheme in conjunction with the approximate-factorization technique. The use of velocity boundary conditions for the intermediate velocity field leads to inconsistent numerical solutions. Appropriate boundary conditions for the intermediate velocity field are derived and tested. Numerical solutions for flow inside a driven cavity and over a backward-facing step are presented and compared with experimental data and other numerical results.

Kim, J.↗

NASA NTRS1985

Model helicopter blade slap at low tip speeds - Theoretical and experimental correlations

A novel data acquisition system has been designed which allows a transfer of pressure transducer and hot film data from a rotating frame to a stationary one, while collecting both loading and far field acoustic measurements simultaneously; this permits correlations to be made between experimental and theoretical predictions of blade loads and the resulting far field acoustics. The comparison of predicted acoustic pulse with experimental measurements has verified the assumptions made in the Widnall and Wolf (1980) theory for the case of low speed incompressible flow. The theory is also shown to be very sensitive to the interaction geometry and trajectory of the blade trailing vortex.

Chan, D. C.-L.↗

NASA NTRS1986

Implicit hybrid schemes for the flux-difference split, three-dimensional Navier-Stokes equations

Implicit hybrid algorithms employing symmetric planar Gauss-Seidel (SPGS) relaxation and either block-tridiagonally structured coefficient matrices (AF-SPGS) or block-triangular coefficient matrices (LU-SPGS) are derived to solve the flux-difference-split Navier-Stokes equations for three-dimensional incompressible flow in an upwind scheme. The physical basis of the approach is discussed, and results for problems involving vortex flow around a thin delta wing at Reynolds numbers 900,000 and 10,000 are presented graphically. It is found that AF-SPGS converges faster on vector computers which depend on long vector lengths to achieve optimum performance, whereas LU-SPGS is preferable on sequentially operating machines and vector computers using shorter vector lengths.

Hartwich, P.-M.↗

NASA NTRS1986

Computational fluid mechanics utilizing the variational principle of modeling damping seals

A computational fluid dynamics code for application to traditional incompressible flow problems has been developed. The method is actually a slight compressibility approach which takes advantage of the bulk modulus and finite sound speed of all real fluids. The finite element numerical analog uses a dynamic differencing scheme based, in part, on a variational principle for computational fluid dynamics. The code was developed in order to study the feasibility of damping seals for high speed turbomachinery. Preliminary seal analyses have been performed.

Abernathy, J. M.↗

NASA NTRS1987

Comparison of Hirs' equation of Moody's equation for determining rotordynamic coefficients of annular pressure seals

The rotordynamic coefficients of an incompressible-flow annular pressure seal were determined using a bulk-flow model in conjunction with two different friction factor relationships. The first, Hirs' equation, assumes the friction factor is a function of Reynolds number only. The second, Moody's equation, approximates Moody's diagram and assumes the friction factor is a function of both Reynolds number and relative roughness. For each value of relative roughness, Hirs' constants were determined so that both equations gave the same magnitude and slope of the friction factor. For smooth seals, both relationships give the same results. For rough seals (e/2 H sub 0 = 0.05) Moody's equation predicts 44% greater direct stiffness, 35% greater cross-coupled stiffness, 19% smaller cross-coupled damping, 59% smaller cross-coupled inertia, and nominally the same direct damping and direct inertia.

Nelson, Clayton C.↗

NASA NTRS1987

A well-posed optimal spectral element approximation for the Stokes problem

A method is proposed for the spectral element simulation of incompressible flow. This method constitutes in a well-posed optimal approximation of the steady Stokes problem with no spurious modes in the pressure. The resulting method is analyzed, and numerical results are presented for a model problem.

Maday, Y.↗

NASA NTRS1987

An analysis of the crossover between local and massive separation on airfoils

Massive separation on airfoils operating at high Reynolds number is an important problem to the aerodynamicist, since its onset generally determines the limiting performance of an airfoil, and it can lead to serious problems related to aircraft control as well as turbomachinery operation. The phenomenon of crossover between local separation and massive separation on realistic airfoil geometries induced by airfoil thickness is investigated for low speed (incompressible) flow. The problem is studied both for the asymptotic limit of infinite Reynolds number using triple-deck theory, and for finite Reynolds number using interacting boundary-layer theory. Numerical results are presented which follow the evolution of the flow as it develops from a mildly separated state to one dominated by the massively separated flow structure as the thickness of the airfoil geometry is systematically increased. The effect of turbulence upon the evolution of the flow is considered, and the impact is significant, with the principal effect being the suppression of the onset of separation. Finally, the effect of surface suction and injection for boundary-layer control is considered. The approach which was developed provides a valuable tool for the analysis of boundary-layer separation up to and beyond stall. Another important conclusion is that interacting boundary-layer theory provides an efficient tool for the analysis of the effect of turbulence and boundary-layer control upon separated vicsous flow.

Barnett, M.↗

NASA NTRS1986

Comparison of Hirs' equation with Moody's equation for determining rotordynamic coefficients of annular pressure seals

The rotordynamic coefficients of an incompressible-flow annular pressure seal were determined using a bulk-flow model in conjunction with two different friction factor relationships. The first, Hirs' equation, assumes the friction factor is a function of Reynolds number only. The second, Moody's equation, approximates Moody's diagram and assumes the friction factor is a function of both Reynolds number and relative roughness. For each value of relative roughness, Hirs' constants were determined so that both equations gave the same magnitude and slope of the friction factor. For smooth seals, both relationships give the same results. For rough seals, Moody's equation predicts 44 percent greater direct stiffness, 35 percent greater cross-coupled stiffness, 19 percent smaller cross-coupled damping, 59 percent smaller cross-coupled inertia, and nominally the same direct damping and direct inertia.

Nelson, C. C.↗

NASA NTRS1987

Energetics of oscillating lifting surfaces using integral conservation laws

The energetics of oscillating flexible lifting surfaces in two and three dimensions is calculated by the use of integral conservation laws in inviscid incompressible flow for general and harmonic transverse oscillations. Total thrust is calculated from the momentum theorem and energy loss rate due to vortex shedding in the wake from the principle of conservation of mechanical energy. Total power required to maintain the oscillations and hydrodynamic efficiency are also determined. In two dimensions, the results are obtained in closed form. In three dimensions, the distribution of vorticity on the lifting surface is also required as input to the calculations. Thus, unsteady lifting-surface theory must be used as well. The analysis is applicable to oscillating lifting surfaces of arbitrary planform, aspect ratio, and reduced frequency and does not require calculation of the leading-edge thrust.

Ahmadi, Ali R.↗

NASA NTRS1987

An Euler code calculation of blade-vortex interaction noise

An Euler code has been developed for calculation of noise radiation due to the interaction of a distributed vortex with a Joukowski airfoil. THe time-dependent incompressible flow field is first determined and then integrated to yield the resulting sound production through use of the elegant low-frequency Green's function approach. This code has several interesting numerical features involved in the vortex motion and in continuous satisfaction of the Kutta condition. In addition, it removes the limitations on Reynolds number and is much more efficient than an earlier Navier-Stokes code. Results indicate that the noise production is due to the deceleration and subsequent acceleration of the vortex as it approaches and passes the airfoil. Predicted acoustic levels and frequencies agree with measured data although a precise comparison would require the strength, size, and position of the incoming vortex to be known.

Hardin, J. C.↗

NASA NTRS1987

Spectral methods in fluid dynamics

Fundamental aspects of spectral methods are introduced. Recent developments in spectral methods are reviewed with an emphasis on collocation techniques. Their applications to both compressible and incompressible flows, to viscous as well as inviscid flows, and also to chemically reacting flows are surveyed. The key role that these methods play in the simulation of stability, transition, and turbulence is brought out. A perspective is provided on some of the obstacles that prohibit a wider use of these methods, and how these obstacles are being overcome.

Hussaini, M. Y.↗

NASA NTRS1987

Nearly two-dimensional solutions of Euler's equations

Motivated by a stretched version of the Taylor-Green initial-value problem for the Euler and Navier-Stokes equations, nearly two-dimensional incompressible flows are considered involving a single direction of slow spatial variation. A multiple-scale formulation of the problem leads by contour averaging to a system that determines the slow development in space and time. It is shown that the latter system is equivalent to an axisymmetric problem with nonstandard connection between circulation, cylindrical radius, and angular velocity component. Special solutions of the system in the exact axisymmetric case suggest that near-two-dimensionality is lost in finite time.

Childress, Stephen↗

NASA NTRS1987

A viscous-inviscid interaction method for ejectors having two primary jets

A viscous-inviscid interaction methodology is developed for evaluating the performance of two-dimensional incompressible flow ejectors that utilize two primary jets. In this method, the inviscid portion of the flow field, which contains the ambient fluid drawn into the device, is modeled using a higher-order panel method. The viscous region, which contains the turbulent jets, is described by an integral method. The viscous and inviscid solutions are matched together in an iterative process that simulates the interaction between the jets and the ambient fluid. The model is applied to a variety of parametric and optimization studies that illustrate the connection between the details of the ejector geometry and the level of thrust augmentation. The advantages of a dual-jet configuration are assessed through comparison with similar calculations for an otherwise identical single-jet ejector.

Lund, T. S.↗

NASA NTRS1985

Application of a lifting surface theory for a helicopter in forward flight

A lifting-surface theory has been developed for a helicopter rotor in forward flight for compressible and incompressible flow. The method utilizes the concept of the linearized acceleration potential and makes use of the doublet lattice procedure. Calculations demonstrating the application of the method are given in terms of the lift distribution on a single rotor, a two-bladed rotor, and a rotor with swept-forward and swept-back tips. In addition, the lift on a rotor which is vibrating in a pitching mode at 4/rev is given. Compressibility effects and interference effects for a two-bladed rotor are discussed.

Runyan, Harry L.↗

NASA NTRS1988

VSAERO analysis of tip planforms for the free-tip rotor

The results of a numerical analysis of two interacting lifting surfaces separated in the spanwise direction by a narrow gap are presented. The configuration consists of a semispan wing with the last 32 percent of the span structurally separated from the inboard section. The angle of attack of the outboard section is set independently from that of the inboard section. In the present study, the three-dimensional panel code VSAERO is used to perform the analysis. Computed values of tip surface lift and pitching moment coefficients are correlated with experimental data to determine the proper approach to model the gap region between the surfaces. Pitching moment data for various tip planforms are also presented to show how the variation of tip pitching moment with angle of attack may be increased easily in incompressible flow. Calculated three-dimensional characteristics in compressible flow at Mach numbers of 0.5 and 0.7 are presented for new tip planform designs. An analysis of sectional aerodynamic center shift as a function of Mach number is also included for a representative tip planform. It is also shown that the induced drag of the tip surface is reduced for negative incidence angles relative to the inboard section. The results indicate that this local drag reduction overcomes the associated increase in wing induced drag at high wing lift coefficients.

Martin, D. M.↗