Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “hot spot”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

Seismotectonic, structural, volcanologic, and geomorphic study of New Zealand; indigenous forest assessment in New Zealand; mapping, land use, and environmental studies in New Zealand, volume 2

The author has identified the following significant results. Ship detection via LANDSAT MSS data was demonstrated. In addition, information on ship size, orientation, and movement was obtained. Band 7 was used for the initial detection followed by confirmation on other MSS bands. Under low turbidity, as experienced in open seas, the detection of ships 100 m long was verified and detection of ships down to 30 m length theorized. High turbidity and sea state inhibit ship detection by decreasing S/N ratios. The radiance effect from snow of local slope angles and orientation was also studied. Higher radiance values and even overloading in three bands were recorded for the sun-facing slope. Local hot spots from solar reflection appear at several locations along transect D-C in Six Mile Creek Basin during September 1976.

Probine, M. C.↗
NASA NTRS1976

A two-satellite study of the neutral atmosphere response to a major geomagnetic storm

Simultaneous measurements of neutral composition from both Esro 4 and Aeros-A have provided a complementary set of data for studying the temporal and spatial characteristics of the thermosphere during a major geomagnetic storm. From the correlative studies of Ar and N2 number densities, the magnetic index Aps, and ground-based magnetograms, it is found that the Ap index only reflects the gross features of atmospheric disturbances. Superposed on the global component are localized regions of 'hot spots' which appear correlated with ground-based magnetograms. Because of these localized disturbances, the interpretation of the atmospheric response to geomagnetic storms becomes ambiguous.

Trinks, H.↗
NASA NTRS1976

The infrared spectrum of Jupiter

The principal characteristics of Jupiter's infrared spectrum are reviewed with emphasis on their significance for our understanding of the composition and temperature structure of the Jovian upper atmosphere. The spectral region from 1 to 40 microns divides naturally into three regimes: the reflecting region, thermal emission from below the cloud deck (5-micron hot spots), and thermal emission from above the clouds. Opaque parts of the Jovian atmosphere further subdivide these regions into windows, and each is discussed in the context of its past or potential contributions to our knowledge of the planet. Recent results are incorporated into a table of atmospheric composition and abundance which includes positively identified constituents as well as several which require verification. The limited available information about spatial variations of the infrared spectrum is presented

Ridgway, S. T.↗
NASA NTRS1978

Photometry of AM Herculis - A slow optical pulsar

Multicolor photometry of the X-ray binary AM Her suggests that the red component of the optical flux is closely related to the source of optical circular polarization in the system. It is concluded from the periodic modulation of flux in the U through R bands, which is particularly well-defined when plotted as color curves, that the primary and secondary minima are neither eclipses by a secondary star nor eclipses by a hot spot. It is suggested that the primary minimum in the visual light curve is the eclipse of a region of intense optical emission in the magnetic field near the surface of a degenerate dwarf by that dwarf itself.

Priedhorsky, W. C.↗
NASA NTRS1978

An analysis of the Venus thermal infrared temperature maps

A detailed analysis of the published Venus IR maps has been performed and a number of new results have been obtained. The global contour map of the average temperature variations in the vicinity of 6120 km reveals the existence of saddle points along the equator at dawn, at noon, and just before sunset. The hot spots observed at 4:30-4:40 A.M. at 65 deg to 68 deg S latitude appear to be in the vicinity of the coldest region from which the 8- to 14-micron emissions originate. At large earth zenith angles the limb darkening curves show a hump which is attributed primarily to a single patchy haze layer in the vicinity of 6123 km and with a thickness of the order of 3 km. An average IR source region temperature of 250 K is obtained at the equator. At the poles the same altitude region is 8 K cooler.

Ainsworth, J. E.↗
NASA NTRS1980

Sealed-in-quartz resistance heater

Electric resistance quartz heater operates at 1,400 F without developing excessively hot spots that can fail prematurely. Since resistance element is sealed in quartz, heater can be used in hostile environments. Sealed construction also keeps heater from contaminating heated object.

Miller, C. G.↗
NASA NTRS1979

Thermostructural applications of heat pipes

The feasibility of integrating heat pipes in high temperature structure to reduce local hot spot temperature was evaluated for a variety of hypersonic aerospace vehicles. From an initial list of twenty-two potential applications, the single stage to orbit wing leading edge showed the greatest promise and was selected for preliminary design of an integrated heat pipe thermostructural system. The design consisted of a Hastelloy X assembly with sodium heat pipe passages aligned normal to the wing leading edge. A d-shaped heat pipe cross section was determined to be optimum from the standpoint of structural weight.

Peeples, M. E.↗
NASA NTRS1979

Large eddy simulation of turbulent channel flow: ILLIAC 4 calculation

The three-dimensional time dependent equations of motion were numerically integrated for fully-developed turbulent channel flow. A large scale flow field was obtained directly from the solution of these equations, and small scale field motions were simulated through an eddy viscosity model. The calculations were carried out on the ILLIAC 4 computer. The computed flow patterns show that the wall layer consists of coherent structures of low speed and high speed streaks alternating in the spanwise direction. These structures were absent in the regions away from the wall. Hot spots, small localized regions of very large turbulent shear stress, were frequently observed. The profiles of the pressure velocity-gradient correlations show a significant transfer of energy from the normal to the spanwise component of turbulent kinetic energy in the immediate neighborhood of the wall ('the splatting effect').

Kim, J.↗
NASA NTRS1978

Five micron limb-darkening and the structure of the Jovian atmosphere

A combined radiative, dynamical, and chemical model of the Jovian atmosphere is presented which reproduces the observed IR limb-darkening curves for several regions on the disk of Jupiter. Two approaches are used to perform the inversion required for determination of the source function, and a power-series-expansion model is examined, along with a convective-equilibrium model, cloud and intermediate-zone models, and a thin-shell model. The statistical methods used in the analysis are outlined, and model fits to the observations are discussed. The chemistry of phase transitions in the hot spots of Jupiter's equatorial belt is briefly investigated.

Newman, W. I.↗
NASA NTRS1979

Temperature, cloud structure, and dynamics of Venus middle atmosphere by infrared remote sensing from Pioneer Orbiter

Further results from the Venus Orbiter radiometric temperature experiment (VORTEX) on the Pioneer Orbiter are presented. These are used to characterize the three-dimensional temperature field, the cloud structure, and the dynamics of the 60- to 130-kilometer altitude region of the Venus atmosphere. One of the new discoveries is a 'dipole' structure at high latitudes, with two hot spots rotating around the pole, surrounded by banks of cold cloud.

Taylor, F. W.↗
NASA NTRS1979

A global geochemical model for the evolution of the mantle

It is proposed that the upper mantle transition region, 220 to 670 km, is composed of eclogite which has been derived from primitive mantle by about 20 percent partial melting and that this is the source and sink of oceanic crust. The remainder of the upper mantle is garnet peridotite which is the source of continental basalts and hotspot magmas. This region is enriched in incompatible elements by hydrous and CO2 rich metasomatic fluids which have depleted the underlying layers in the L.I.L. elements and L.R.E.E. The volatiles make this a low-velocity, high attenuation, low viscosity region. The eclogite layer is internally heated and its controls the convection pattern in the upper mantle. Plate tectonics is intermittent. The continental thermal anomaly at a depth of 150-220 km triggers kimberlite and carbonatite activity, alkali and flood basalt volcanism, vertical tectonics and continental breakup. Hot spots remain active after the continents leave and build the oceanic islands. Mantle plumes rise from a depth of about 220 km. Midocean ridge basalts rise from the depleted layer below this depth. Material from this layer can also be displaced upwards by subducted oceanic lithosphere to form back-arc basins.

Anderson, D. L.↗
NASA NTRS1979

PEP solar array definition study

The conceptual design of a large, flexible, lightweight solar array is presented focusing on a solar array overview assessment, solar array blanket definition, structural-mechanical systems definition, and launch/reentry blanket protection features. The overview assessment includes a requirements and constraints review, the thermal environment assessment on the design selection, an evaluation of blanket integration sequence, a conceptual blanket/harness design, and a hot spot analysis considering the effects of shadowing and cell failures on overall array reliability. The solar array blanket definition includes the substrate design, hinge designs and blanket/harness flexibility assessment. The structural/mechanical systems definition includes an overall loads and deflection assessment, a frequency analysis of the deployed assembly, a components weights estimate, design of the blanket housing and tensioning mechanism. The launch/reentry blanket protection task includes assessment of solar cell/cover glass cushioning concepts during ascent and reentry flight condition.

Source record↗
NASA NTRS1979

Global tectonic studies: Hotspots and anomalous topography

Volcanic activity on Earth and its secular variations are compared with that on other terrestrial planets. Activity at divergent, transform, and convergent plate margins is described with particular emphasis on hot spots and flood basalts. The timing and causing of uplifting above 500 meters, which in not associated with either plate boundaries or the normal nonplate margin edges of continents is considered with particular focus on the Guyana Highlands in southern Venezuela and western British Guiana, and the Brazilian Highlands in the central, eastern, and southern parts of the country. The mode and mechanism of plateau uplifting and the re-elevation of old mountain belts and subsidence of intra-continental basins are also discussed.

Burke, K.↗
NASA NTRS1980

Experimental combustor study program

Advanced combustor concepts are evaluated as a means of accommodating possible future broad specification fuels. The three advanced double annular combustor concepts consisted of (1) a concept employing high pressure drop fuel nozzles for improved atomization, (2) a concept with premixing tubes in the main stage, and (3) a concept with the pilot stage on the inside and the main stage on the sideout, which is the reverse of the other two concepts. All of the advanced concepts show promise for reduced sensitivity to fuel hydrogen content. Some hardware problems were encountered, but these problems could be quickly resolved if refinement tests were conducted. The design with the premixing main stage was selected for a parametric test because of its low NOx emissions level, carbon free dome, and very low dome temperatures which were essentially independent of fuel type. The other advanced designs also had low done temperatures. The premixing dome design liner temperatures exhibited less sensitivity to fuel type than did the base-line combustor, although more sensitivity than observed for concept 1. The inner liner hot spot and the observed smoke results for the premixing design suggest that the fuel-air mixture was not as uniform as desired.

Kasper, J. M.↗
NASA NTRS1979

Topography and tectonics of mid-oceanic ridge axes

Numerical fluid dynamic models of mid-oceanic ridge axes were constructed using distributions of material properties constrained by seismic studies and thermal calculations. The calculations indicate that spreading is passive except for forces caused by density differences due to thermal expansion and partial melt. Except for geometric differences due to temperature distribution, one set of mechanical properties can adequately explain central rifts of slow ridges and central peaks of fast ridges. Viscous head loss in the upwelling material dominates at low spreading rates where material ascends through a narrow conduit. Thermal expansion and partial melting dominate at high spreading rates where a wide low viscosity crustal magma chamber is present. The preferred rheology is 10 to the 20th poise for the upwelling lithosphere; less than 5 x 10 to the 17th for the crustal magma chamber and axial intrusion zone at fast ridges, and a yield stress of 200 bars for the lithosphere. The calculation correctly predicts the existence of central peaks at 'hot-spot' ridges, where seismic evidence indicates a large magma chamber.

Sleep, N. H.↗
NASA NTRS1980

Small-scale structure of the CO emission in S255 from lunar occultation observations

Two lunar occultations of the S255 H II region/molecular cloud complex were observed in the 2.6 mm CO line during 1978 and 1979. The resolution obtained (between 4 arcsec and 7 arcsec) enables us to resolve bright sources that are much smaller than the 44 arcsec telescope beam. In addition to the large-scale structure (approximately 10 arcmin in size) seen in previous CO maps, the observations reveal two high-temperature emission regions in the cloud core associated with two compact infrared sources about 20 arcsec apart. The first CO hot spot is larger in size with a Gaussian width of 41 arcsec + or - 7 arcsec and a peak temperature of 65 K. Its center falls between the two small infrared sources S255 IRS1 and IRS2. The linear size and peak temperature of this source are remarkably similar to those in the Orion Kleinmann-Low nebula. The second source is revealed from a discontinuous change in the CO line flux as the lunar limb crossed S255 IRS1. The size of this component is less than 7 arcsec; its temperature must exceed 200 K. No evidence is found for exceptionally high temperatures at the boundary of the two H II regions crossed during the occultations.

Schloerb, F. P.↗
NASA NTRS1980

Thermomechanical phenomena in high speed rubbing

An analytical approach is presented for the modeling of the thermomechanical interactions which occur in high speed sliding situations. These sliding contact problems which are characterized by active and interrelated thermal and mechanical phenomena could be called 'rub energetics' problems. Analytical models were developed to simulate two different rub situations: high energy braking of disk brakes and high speed rubs of gas path seals in turbine engines. The models proved to be particularly useful in predicting the severe temperatures and deformations near hot contact patches on the rubbing surfaces. The size of the hot patches is generally determined by normal load and the properties of the contacting materials. Temperatures at the contact patches can approach the melting point of the materials, especially at high sliding velocities. These high temperatures can lead to large amounts of near-surface deformation and high wear rates. Decreased contact temperatures can result from using materials with increased thermal conductivity and increased heat capacity or choosing mechanical properties (decreased stiffness, yield stress or coefficient of thermal expansion) which give larger hot spot size.

Kennedy, F. E.↗
NASA NTRS1981

Food packing optimization

The development of a universal closure lid for the space shuttle food package is reported. The revised lid needs a folded configuration which, when unfolded, fully conforms to the interior surfaces of the food cup. Experimental thermoform molds were fabricated and test lids formed. The lid material not in contact with the food conformed to the cup interior without wrinkles, permitting full nesting of the cups. The final lid design was established and thermoform tooling designed and fabricated. Lids formed on these molds were tested for strength. The heating elements were replaced and repositioned to eliminate any hot spots which may cause warpage.

Source record↗