Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “high performance space computing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Computational Thermal Hydraulics of a High-Performance Low-Enriched-Uranium Annular Target for HFIR Irradiation

Molybdenum-99 has historically been generated via isolation from fissioned highly enriched uranium (HEU) targets. Here, this isotope is in high demand due to its daily use across the world in radiopharmaceutical medical procedures. The primary objective of this work was to design and analyze an experimental target assembly containing one low-enriched-uranium (LEU) annular target for irradiation at the High Flux Isotope Reactor (HFIR). Efforts included incorporating spatially dependent energy sources from neutron and gamma interactions, quantifying thermal contact conductance at material interfaces, performing grid-independent studies, comparing turbulence models, and simulating various steady-state and transient scenarios relevant for irradiation qualification and eventual insertion. These models provide velocity, pressure, and temperature distributions in both space and time. Such results enable the selection of an appropriate irradiation location, fission rate density, and flow-limiting orifice size and demonstrate compliance with HFIR safety requirements such that insertion into the reactor can be approved. This analysis shows that across all scenarios, wetted surface temperatures remain below the coolant saturation temperature with no net vapor formation in the coolant. In every scenario, all components stay below 30% of the aluminum 6061 melting temperature. Computational fluid dynamics and system-level models predict peak target temperatures that agree within 4%, though the predicted axial location of the peak differs by about 10% of the heated length due to differences in flow development length. These results de-risk the irradiation of LEU (annular targets) and strengthen a domestic, HEU-independent 99 Mo supply by providing important fuel performance data to form the foundation for a robust licensing basis.

Molybdenum-99↗
DOE OSTI2023

Fourier-informed knot placement schemes for B-spline approximation

Fitting B-splines to scientific data is especially challenging when the given data contain noise, jumps, or corners. Here, we describe how periodic data sets with these features can be efficiently approximated with B-splines by analyzing the Fourier spectrum of the data. Our method uses a collection of spectral filters to compute high-order derivatives, smoothed versions of noisy data, and the locations of jump discontinuities. Further, these quantities are then combined to choose knots that capture the qualitative features of the data, leading to accurate B-spline approximations with few knots. The method we introduce is direct and does not require any intermediate B-spline fitting before choosing the final knot distribution. Aside from fast Fourier transforms to transfer to and from Fourier space, the method runs in linear time with very little communication. We assess performance on several test cases in one and two dimensions, including data sets with jump discontinuities and noise. These tests show the method fits discontinuous data without spurious oscillations and remains effective in the presence of noise.

97 MATHEMATICS AND COMPUTING↗
NASA NTRSDate not supplied

Solid-state Architecture Batteries for Enhanced Rechargeability and Safety (SABERS) for Extended Deep Space Applications

Extended duration deep space missions as well as permanent space habitats face numerous technical challenges, key among them is energy generation and energy storage. There are considerable monetary and technical barriers to the generation of power in space. Therefore, it is important to store and be able to access power in an efficient and safe manner over a large number of cycles. Energy storage and in particular, batteries, are vital to the operation of next-generation extraterrestrial shuttles, rovers, habitats and extravehicular activity (EVA) space suits. The performance metrics for extended duration space missions are at least 2 times greater than those set for terrestrial applications such as electric automobiles. Furthermore, safety is essential for operation of space missions particularly involving astronauts such as shuttles, habitats and EVA space suits. Preliminary systems level analysis has indicated that there are five key properties which must be optimized for successful implementation of battery systems. Those five key criteria are: safety, energy density, power, packaging design and scalability. Current state-of-the-art (SOA) lithium-ion batteries can meet or exceed the requirements for certain space applications in the areas of power and scalability, yet are insufficient in the key performance criteria of energy, safety and packaging design. The SABERS concept proposes a battery that meets all five key performance criteria through development of a solid-state architecture battery utilizing high capacity sulfur-selenium cathode and lithium metal anode. The combination of sulfur and selenium offers a balanced energy-to-power density ratio, which can be tailored to the specific application by altering the stoichiometric ratios of sulfur to selenium. This hybrid cathode will be developed by implementing NASA patented holey graphene technology as a highly conductive, ultra-lightweight electrode scaffold. A solid-state electrolyte will be used as a safe, non-flammable replacement to the highly flammable liquid organic electrolytes currently used in SOA lithium-ion batteries. This solid-state lithium-sulfur/selenium cell will be designed into a serial stacking configuration to enable dense packaging of the battery cells. The serial stacking configuration is termed a bipolar stack, which has the advantages of reducing overall cell weight, simplifying the interfaced connections for the cell, and minimizing the cooling requirements for the cell. Lastly, optimization of battery components will occur through a robust and rigorous combination of various computational modeling techniques covering multiple length scales. The expected result will be a fully solid-state battery with operational temperatures up to 150 °C which provides the required energy density, discharge rates, and inherent safety to meet the strict space mission performance criteria. In particular, the wide operational temperature window is required for the large temperature ranges which are experienced across a broad range of potential space missions. This presentation will show initial results that demonstrate the SABERS team has developed a composite carbon-sulfur cathode which exceeds 1100 Wh/kg at a discharge rate of 0.4C, and 804 Wh/kg at a discharge rate of 1C. Additionally, this presentation will show the SABERS team multiscale computational modeling approach and has produced a novel particle dynamics method called Solid Electrolyte Sphere Approximation Model (SESAM). SESAM is on the 1-10 µm scale and provides electromechanical and grain interactions for predictive design guidelines for the experimental team to follow.

Urban Air Mobility (UAM) Vehicles↗
DOE OSTI2022

DenKv: Addressing Design Trade-offs of Key-value Stores for Scientific Applications

High-performance computing (HPC) facilities have employed flash-based storage tier near to compute nodes to absorb high I/O demand by HPC applications during periodic system-level checkpoints. To accelerate these checkpoints, proxy-based distributed key-value stores (PD-KVS) gained particular attention for their flexibility to support multiple backends and different network configurations. PD-KVS rely internally on monolithic KVS, such as LevelDB or RocksDB, to exploit the KV interface and query support. However, PD-KVS are unaware of the high redundancy factor in checkpoint data, which can be up to GBs to TBs, and therefore, tend to generate high write and space amplification on these storage layers. In this paper, we propose DenKv which is deduplication-extended node-local LSM-tree-based KVS. DenKv employs asynchronous partially inline dedup (APID) and aims to maintain the performance characteristics of LSM-tree-based KVS while reducing the write and space amplification problems. We implemented DenKv atop BlobDB and showed that our proposed solution maintains performance while reducing write amplification up to 2× and space amplification by 4× on average.

Khan, Awais↗
DOE OSTI2023

Prediction and uncertainty quantification of shale well performance using multifidelity Monte Carlo

Uncertainty quantification is an integral component of reservoir management, especially considering the inherent uncertainty in subsurface systems. While a standard practice to estimate the uncertainty, Monte Carlo (MC) simulation is computationally intense when the sampling population comprises high-fidelity simulations. Alternatively, the Multi-fidelity Monte Carlo (MFMC) simulation overcomes this computational intensity by integrating low- and high-fidelity simulations. Our goal is to minimize the number of expensive high-fidelity simulations while maintaining accuracy and using numerous fast and cheap low-fidelity simulations to efficiently sample to input parameter space of interest. We selected gas production from unconventional wells to demonstrate the potential speedups and accuracy of the MFMC approach. The model fidelity usually determines the trade-off between accuracy and efficiency. While the high-fidelity model is more accurate, the low-fidelity model is more efficient. Our high-fidelity simulation includes reservoir simulations of a hydraulically fractured well. On the other hand, our low-fidelity model comprises the parallel-plate flow model. We used differential programming to efficiently solve the 1D flow model, where automatic differentiation is used to efficiently compute the gradients. We matched the production profile of high-fidelity simulations with our low-fidelity simulations. Then, we used a support vector regression to map the high- and low-fidelity input parameters. The mapping function is essential to tune the low-dimensional parameter space of the low-fidelity model to the high-dimensional parameter space of the high-fidelity model. We found that we can use a combination of 9 high fidelity and 10,000 low fidelity simulations to efficiently and accurately simulate pressure management. This method is at least two orders of magnitude faster than only using high-fidelity simulations. Finally, from a broader perspective, MFMC could efficiently estimate the uncertainty of various systems and models, integrating low- and high-fidelity models.

04 OIL SHALES AND TAR SANDS↗
DOE OSTI2024

Using Parameter Sweep in WaterTAP to Analyze New Water Treatment Technologies

We describe a powerful and generalized parameter sweep tool in this report that was originally developed to analyze the performance of existing and novel water treatment models being developed in WaterTAP. Since WaterTAP is built upon IDAES and Pyomo, the parameter sweep tool can be used to systematically explore and debug the behavior of most Pyomo and IDAES numerical models. In order to enable meaningful analyses, the parameter sweep tool has been designed with the following features: 1) Model flexibility: The parameter sweep tool does not enforce any restrictions on the types of models that can be used with it. As long as a Pyomo model can be solved and the parameter is active and mutable, the tool only needs functions that describe how to run the model, the sweep parameters, and the output quantities of interest. 2) Flexible sampling: The parameter sweep tool has inbuilt functions to generate samples from a random distribution or a multidimensional Euclidean space. Furthermore, the users have to ability to supply samples generated from a tool of their choice. 3) Multiple sweep types: A user can choose from one of 3 types of parameter sweeps depending on their needs. 4) Detailed outputs: Outputs generated by the parameter sweep tool can be stored in detailed H5 file or user-friendly CSV files for post processing. 5) Parallel computing: The parameter sweep supports shared and distributed memory parallel computing to enable the use of high performance computers (HPC) for large-scale analyses. 6) Modular: The parameter sweep tool is self-contained and can easily be integrated within an outer-loop analysis or as desired by the user. 7) Ease of use: The tool is well documented and a simple sweep can be easily executed by following the online documentation in a few lines of code. We demonstrate the use of the parameter sweep tool on a simple water treatment system from the WaterTAP repository and show its parallel scaling performance on an Apple laptop and NREL's Eagle HPC. The parameter sweep tool is actively being used with models currently being developed within WaterTAP and we expect its use to grow beyond it to other IDAES and Pyomo models.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

A Tailored Convolutional Neural Network for Nonlinear Manifold Learning of Computational Physics Data Using Unstructured Spatial Discretizations

In this work, we propose a nonlinear manifold learning technique based on deep convolutional autoencoders that is appropriate for model order reduction of physical systems in complex geometries. Convolutional neural networks have proven to be highly advantageous for compressing data arising from systems demonstrating a slow-decaying Kolmogorov n-width. However, these networks are restricted to data on structured meshes. Unstructured meshes are often required for performing analyses of real systems with complex geometry. Our custom graph convolution operators based on the available differential operators for a given spatial discretization effectively extend the application space of deep convolutional autoencoders to systems with arbitrarily complex geometry that are typically discretized using unstructured meshes. We propose sets of convolution operators based on the spatial derivative operators for the underlying spatial discretization, making the method particularly well suited to data arising from the solution of partial differential equations. We demonstrate the method using examples from heat transfer and fluid mechanics and show better than an order of magnitude improvement in accuracy over linear methods.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Evaluating the potential of disaggregated memory systems for HPC applications

Summary Disaggregated memory is a promising approach that addresses the limitations of traditional memory architectures by enabling memory to be decoupled from compute nodes and shared across a data center. Cloud platforms have deployed such systems to improve overall system memory utilization, but performance can vary across workloads. High‐performance computing (HPC) is crucial in scientific and engineering applications, where HPC machines also face the issue of underutilized memory. As a result, improving system memory utilization while understanding workload performance is essential for HPC operators. Therefore, learning the potential of a disaggregated memory system before deployment is a critical step. This paper proposes a methodology for exploring the design space of a disaggregated memory system. It incorporates key metrics that affect performance on disaggregated memory systems: memory capacity, local and remote memory access ratio, injection bandwidth, and bisection bandwidth, providing an intuitive approach to guide machine configurations based on technology trends and workload characteristics. We apply our methodology to analyze thirteen diverse workloads, including AI training, data analysis, genomics, protein, fusion, atomic nuclei, and traditional HPC bookends. Our methodology demonstrates the ability to comprehend the potential and pitfalls of a disaggregated memory system and provides motivation for machine configurations. Our results show that eleven of our thirteen applications can leverage injection bandwidth disaggregated memory without affecting performance, while one pays a rack bisection bandwidth penalty and two pay the system‐wide bisection bandwidth penalty. In addition, we also show that intra‐rack memory disaggregation would meet the application's memory requirement and provide enough remote memory bandwidth.

Ding, Nan↗
DOE OSTI2023

Scaling comb-driven resonator-based DWDM silicon photonic links to multi-Tb/s in the multi-FSR regime

The use of chip-based micro-resonator Kerr frequency combs in conjunction with dense wavelength-division multiplexing (DWDM) enables massively parallel intensity-modulated direct-detection data transmission with low energy consumption. Resonator-based modulators and filters used in such systems can limit the number of usable wavelength channels due to practical constraints on the maximum achievable free spectral range (FSR). In this work, we introduce the design of multi-Tb/s comb-driven resonator-based silicon photonic links by leveraging the multi-FSR regime. We demonstrate the viability of the link architecture with yield estimates that are supported by extensive wafer-scale measurements of 704 micro-resonators fabricated in a commercial complementary metal–oxide–semiconductor foundry. We show that a 2.80 Tb/s link is realizable with a ≥6 σ yield (∼99.999%), and that aggregate bandwidths of 3.76 Tb/s and 4.72 Tb/s are possible if yield targets are relaxed (3 σ and 1 σ , respectively). All designs represent a 1.94−3.28× boost to aggregate link bandwidth while maintaining BER≤10 −10 performance, with a theoretical bandwidth of 10.51 Tb/s being possible for sufficiently robust resonators. We use high-speed BER measurements to inform co-optimization of data rate and aggressor spacing ( λ ag ), limiting any additional loss-based power penalties to off-resonance insertion loss (IL) and routing loss. This work demonstrates that, through the multi-FSR regime, there is a clear path toward Kerr comb-driven ultra-broadband, high bandwidth silicon photonic links that can support next-generation data centers and high-performance computers.

James, Aneek (ORCID:0000000262527807)↗
DOE OSTI2023

Permanent Magnets Featuring Heavy Main Group Elements for Magnetic Anisotropy

Permanent magnets are the functional component of electric motors and generators found in numerous renewable energy applications. To improve energy conversion in such applications, we require fundamentally new magnets that generate higher magnetic flux per volume while retaining the properties conferred by rare-earth elements incorporated into current technologies. We hypothesize that by engendering a covalent interaction between two elements, we can access a new regime of magnetic materials where the two components of a magnetic moment—spin and orbital angular momentum—come from two separate atoms to form a complete magnetic moment. Our previous research utilized high-pressure conditions to discover two new candidate materials ideal for assessing this hypothesis. The first material, FeBi 2 , enables the study of an unprecedented solid state metal-metal bonding interaction. The second, MnBi 2 represents the second member of the promising Mn–Bi family known for its magnetic properties. Importantly, MnBi 2 is isostructural to FeBi 2 . Together these chemically simple but magnetically rich materials provide an elegant platform for elucidating fundamental design principals of magnetic anisotropy while inspiring the synthesis of new magnetic materials. More generally, solid-state chemistry remains a synthetic black box. To fully harness the potential of such new materials, it is vital to create a window into both the structure and the properties of our high-pressure materials. One missing area of importance to energy science is high-pressure magnetometry. To this end, we assessed the magnetic structure of these materials through two objectives: (1) we performed magnetometry measurements at high-pressures, including performing high-pressure X-ray Magnetic Circular Dichroism (XMCD) experiments on these materials that are only synthesized at high-pressure and cannot be recovered to ambient conditions and (2) we targeted the recovery of these materials using dynamic compression approaches, starting with laser shock techniques. Future directions include expanding our focus to ternary phase space, employing high-throughput computational approaches to direct our search for magnetic materials across the Periodic Table. This award was originated at Northwestern, and reopened as a new grant at MIT. This is the close out for Northwestern.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Streaming Analytics for Anomaly Detection in Large-Scale Data

Anomalous behavior poses serious risks to assured performance and reliability of complex, high-consequence systems. For spaceborne assets and their state-of-health (SOH) telemetry, the challenges of high-dimensional data of varying data types are compounded by computational limitations from size, weight, and power (SWaP) constraints as well as data availability. Automated anomaly detection methods tend to perform poorly under these constraints, while current operational approaches can introduce delays in response time due to the manual, retrospective processes for understanding system failures. As a result, presently deployed space systems, and those deployed in the near future, face situations where mission operations might be delayed or only be able to operate under degraded capabilities. Here, we examine a near-term lightweight solution that provides real-time detection capabilities for rare events and assess state-of-the-art anomaly detection techniques against real SOH telemetry from space platforms. This report describes our methodology and research, which could support more automated capabilities for comprehensive space operations as well as for other resource-constrained edge applications.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1984

Initial results of sensitivity tests - Performed on the RE-1000 free-piston Stirling engine

Tests have been performed over several years to investigate the dynamics of a free-piston Stirling engine for the purpose of computer code validation. Tests on the 1 kW (1.33 hp) single cylinder engine have involved the determination of the sensitivity of the engine performance to variations in working space pressure, heater and cooler temperatures, regenerator porosity, power piston mass, and displacer dynamics. Maps of engine performance have been recorded with the use of an 81.2 percent porosity regenerator. Both a high-efficiency displacer and a high-power displacer were tested; efficiencies up to 33 percent were recorded, and power output of approximately 1500 W was obtained. Preliminary results of the sensitivity tests are presented, and descriptions of future tests are given.

Schreiber, J. G.↗
NASA NTRS1989

Overview of aerothermodynamic loads definition study

Over the years, NASA has been conducting the Advanced Earth-to-Orbit (AETO) Propulsion Technology Program to provide the knowledge, understanding, and design methodology that will allow the development of advanced Earth-to-orbit propulsion systems with high performance, extended service life, automated operations, and diagnostics for in-flight health monitoring. The objective of the Aerothermodynamic Loads Definition Study is to develop methods to more accurately predict the operating environment in AETO propulsion systems, such as the Space Shuttle Main Engine (SSME) powerhead. The approach taken consists of 2 parts: to modify, apply, and disseminate existing computational fluid dynamics tools in response to current needs and to develop new technology that will enable more accurate computation of the time averaged and unsteady aerothermodynamic loads in the SSME powerhead. The software tools are detailed. Significant progress was made in the area of turbomachinery, where there is an overlap between the AETO efforts and research in the aeronautical gas turbine field.

Gaugler, Raymond E.↗
NASA NTRS1991

An analysis of Space Shuttle countdown activities: Preliminaries to a computational model of the NASA Test Director

Before all systems are go just prior to the launch of a space shuttle, thousands of operations and tests have been performed to ensure that all shuttle and support subsystems are operational and ready for launch. These steps, which range from activating the orbiter's flight computers to removing the launch pad from the itinerary of the NASA tour buses, are carried out by launch team members at various locations and with highly specialized fields of expertise. The liability for coordinating these diverse activities rests with the NASA Test Director (NTD) at NASA-Kennedy. The behavior is being studied of the NTD with the goal of building a detailed computational model of that behavior; the results of that analysis to date are given. The NTD's performance is described in detail, as a team member who must coordinate a complex task through efficient audio communication, as well as an individual taking notes and consulting manuals. A model of the routine cognitive skill used by the NTD to follow the launch countdown procedure manual was implemented using the Soar cognitive architecture. Several examples are given of how such a model could aid in evaluating proposed computer support systems.

John, Bonnie E.↗
NASA NTRS2004

Reliability-Based Life Assessment of Stirling Convertor Heater Head

Onboard radioisotope power systems being developed and planned for NASA's deep-space missions require reliable design lifetimes of up to 14 yr. The structurally critical heater head of the high-efficiency Stirling power convertor has undergone extensive computational analysis of operating temperatures, stresses, and creep resistance of the thin-walled Inconel 718 bill of material. A preliminary assessment of the effect of uncertainties in the material behavior was also performed. Creep failure resistance of the thin-walled heater head could show variation due to small deviations in the manufactured thickness and in uncertainties in operating temperature and pressure. Durability prediction and reliability of the heater head are affected by these deviations from nominal design conditions. Therefore, it is important to include the effects of these uncertainties in predicting the probability of survival of the heater head under mission loads. Furthermore, it may be possible for the heater head to experience rare incidences of small temperature excursions of short duration. These rare incidences would affect the creep strain rate and, therefore, the life. This paper addresses the effects of such rare incidences on the reliability. In addition, the sensitivities of variables affecting the reliability are quantified, and guidelines developed to improve the reliability are outlined. Heater head reliability is being quantified with data from NASA Glenn Research Center's accelerated benchmark testing program.

Shah, Ashwin R.↗
NASA NTRS2011

NASA Tech Briefs, February 2011

Topics covered include: Multi-Segment Radius Measurement Using an Absolute Distance Meter Through a Null Assembly; Fiber-Optic Magnetic-Field-Strength Measurement System for Lightning Detection; Photocatalytic Active Radiation Measurements and Use; Computer Generated Hologram System for Wavefront Measurement System Calibration; Non-Contact Thermal Properties Measurement with Low-Power Laser and IR Camera System; SpaceCube 2.0: An Advanced Hybrid Onboard Data Processor; CMOS Imager Has Better Cross-Talk and Full-Well Performance; High-Performance Wireless Telemetry; Telemetry-Based Ranging; JWST Wavefront Control Toolbox; Java Image I/O for VICAR, PDS, and ISIS; X-Band Acquisition Aid Software; Antimicrobial-Coated Granules for Disinfecting Water; Range 7 Scanner Integration with PaR Robot Scanning System; Methods of Antimicrobial Coating of Diverse Materials; High-Operating-Temperature Barrier Infrared Detector with Tailorable Cutoff Wavelength; A Model of Reduced Kinetics for Alkane Oxidation Using Constituents and Species for N-Heptane; Thermally Conductive Tape Based on Carbon Nanotube Arrays; Two Catalysts for Selective Oxidation of Contaminant Gases; Nanoscale Metal Oxide Semiconductors for Gas Sensing; Lightweight, Ultra-High-Temperature, CMC-Lined Carbon/Carbon Structures; Sample Acquisition and Handling System from a Remote Platform; Improved Rare-Earth Emitter Hollow Cathode; High-Temperature Smart Structures for Engine Noise Reduction and Performance Enhancement; Cryogenic Scan Mechanism for Fourier Transform Spectrometer; Piezoelectric Rotary Tube Motor; Thermoelectric Energy Conversion Technology for High-Altitude Airships; Combustor Computations for CO2-Neutral Aviation; Use of Dynamic Distortion to Predict and Alleviate Loss of Control; Cycle Time Reduction in Trapped Mercury Ion Atomic Frequency Standards; and A (201)Hg+ Comagnetometer for (199)Hg+ Trapped Ion Space Atomic Clocks.

Source record↗
NASA NTRS2006

Advanced Technologies for Future Spacecraft Cockpits and Space-based Control Centers

The National Aeronautics and Space Administration (NASA) is embarking on a new era of Space Exploration, aimed at sending crewed spacecraft beyond Low Earth Orbit (LEO), in medium and long duration missions to the Lunar surface, Mars and beyond. The challenges of such missions are significant and will require new technologies and paradigms in vehicle design and mission operations. Current roles and responsibilities of spacecraft systems, crew and the flight control team, for example, may not be sustainable when real-time support is not assured due to distance-induced communication lags, radio blackouts, equipment failures, or other unexpected factors. Therefore, technologies and applications that enable greater Systems and Mission Management capabilities on-board the space-based system will be necessary to reduce the dependency on real-time critical Earth-based support. The focus of this paper is in such technologies that will be required to bring advance Systems and Mission Management capabilities to space-based environments where the crew will be required to manage both the systems performance and mission execution without dependence on the ground. We refer to this concept as autonomy. Environments that require high levels of autonomy include the cockpits of future spacecraft such as the Mars Exploration Vehicle, and space-based control centers such as a Lunar Base Command and Control Center. Furthermore, this paper will evaluate the requirements, available technology, and roadmap to enable full operational implementation of onboard System Health Management, Mission Planning/re-planning, Autonomous Task/Command Execution, and Human Computer Interface applications. The technology topics covered by the paper include enabling technology to perform Intelligent Caution and Warning, where the systems provides directly actionable data for human understanding and response to failures, task automation applications that automate nominal and Off-nominal task execution based on human input or integrated health state-derived conditions. Shifting from Systems to Mission Management functions, we discuss the role of automated planning applications (tactical planning) on-board, which receive data from the other cockpit automation systems and evaluate the mission plan against the dynamic systems and mission states and events, to provide the crew with capabilities that enable them to understand, change, and manage the timeline of their mission. Lastly, we discuss the role of advanced human interface technologies that organize and provide the system md mission information to the crew in ways that maximize their situational awareness and ability to provide oversight and control of aLl the automated data and functions.

Garcia-Galan, Carlos↗
DOE OSTI2025

Multi-Objective Optimization of Uranium Target Assembly–3: A Comparison of Genetic and Traditional Methods

Commonly produced as a byproduct of uranium fission, 99 Mo is a key medical isotope that is in high demand in the United States. An international goal is to switch from medical isotope production technologies that require highly enriched uranium to medical isotope production technologies that require only low-enriched uranium. Niowave Inc. is contributing to this goal by developing an accelerator-driven subcritical assembly called the Uranium Target Assembly (UTA). This work compares the performance of Dakota’s Multi-Objective Genetic Algorithm (MOGA) against traditional sensitivity analysis in the neutronic optimization of the UTA-3 system. The design objectives are k-eigenvalue (k eff ) and natural uranium fission power, which are directly correlated with the amount of 99 Mo produced. Dakota:MOGA did not perform as well as human engineering ingenuity in optimization studies with high numbers of input parameters, such as fuel rod type selection and fuel rod placement. However, Dakota:MOGA did outperform traditional sensitivity analysis in optimization studies with fewer than 20 parameters and revealed the degree to which each parameter influences the optimal design space for k eff and natural uranium fission power (to a lesser extent). As the design model became more complex in the final stage of design, the computational resources required to calculate the design objective values in the Monte Carlo N-Particle transport code from selected input parameter combinations limited Dakota:MOGA’s performance, and, unfortunately, human intervention was required to discern the optimal design space. In conclusion, future work will attempt to reduce computational resource constraints by incorporating areduced-order neutronics model into the optimization cycle.

Accelerator-driven systems↗