Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “heat map”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36
All sourcesNASA NTRSDOE OSTI
NASA NTRS2010

Radiation Environment and Surface Radiolytic Interactions at Mimas

Saturn's innermost principal moon Mimas shares the distinction with Europa at Jupiter of being the most irradiated icy moon in its respective planetary system, although the energetic electron energy flux at Mimas is forty times smaller than at Europa. High energy (> 10 MeV) proton fluxes are low in this moon's orbital corridor, likely since slowly diffusing protons from the weak but steady source of cosmic ray albedo neutron decay (CRAND) cannot accumulate without impacting the moon surface. Lower energy proton fluxes are also evidently suppressed in this orbital region. Plasma ion and electron fluxes are also low apparently due to cooling by interaction with E-ring dust and neutral gas from Enceladus. Due to energy-dependent effects of longitudinal gradient-curvature drift for the electrons, the trailing hemisphere is mainly irradiated by electrons at energies below 1 MeV that drift relative to Mimas in the prograde direction of orbital motion around Saturn, while higher energy electrons primarily impact the leading hemisphere. Plasma ions in the inner magnetosphere of Saturn are mainly pickup ions forming from the dissociation products of Enceladus plume water molecules, additionally including some contribution from photosputtering of the main rings, and do not introduce new elemental materials at Mimas via surface implantation from the corotating plasma. Thus the primary interaction at the surface is radiolytic chemistry induced in pure water ice by relatively deep penetration of the energetic electrons to millimeter and greater depths, as compared to the micron depths impacted by the corotating plasma ions. If surface erosion by sputtering from relatively low fluxes of the plasma and more energetic ions is indeed ineffective, then molecular products (OH, H2O2, 02, 03) of the radiolytic interactions may accumulate in the meters-deep impact regolith of the surface ices. An effect of regolith trapped gas accumulation could be to increase porosity and reduce thermal conductivity of the ice, potentially contributing to reported thermal anomalies from Cassini infrared map observations. Low amplitude of trailing-leading asymmetry in optical albedo and color maps at Mimas is suggestive of relative weakness of asymmetrical effects from low-energy ions. Greater induced asymmetries are expected and observed for the moons beyond Enceladus in the middle magnetospheric region of hot plasma ions at much greater fluxes than at Mimas. Low density (1.15 g/cc) of this moon indicates paucity of mineral salts and radiogenic heating to maintain subsurface liquids, so Enceladus-like cryovolcanism as a resurfacing process is unlikely despite closer proximity to Saturn, greater tidal forcing, and more intense surface irradiation than for Enceladus.

Cooper, J. F.↗
NASA NTRS1976

A far-infrared map of the Ophiuchus dark cloud region

An extensive area of the Ophiuchus dark cloud has been mapped at far-infrared (40-50 microns) wavelengths with high angular resolution (1 arcmin) using a 102-cm balloon-borne telescope. Three sources were detected and resolved. Two of the sources were identified with strong 2-micron sources that were also associated with radio continuum emission. The far-infrared flux is consistent with radiation from dust heated by an early B star. Previous 2-micron observations have indicated the presence of a large number of early B stars embedded in the dark cloud; the far-infrared observations indicate, however, that although some early B stars are in the dark cloud, most of the 2-micron sources are either behind the cloud or are stars not on the main sequence.

Fazio, G. G.↗
NASA NTRS1978

Forebody and afterbody solutions of the Navier-Stokes equations for supersonic flow over blunt bodies in a generalized orthogonal coordinate system

A coordinate transformation, which can approximate many different two-dimensional and axisymmetric body shapes with an analytic function, is used as a basis for solving the Navier-Stokes equations for the purpose of predicting 0 deg angle of attack supersonic flow fields. The transformation defines a curvilinear, orthogonal coordinate system in which coordinate lines are perpendicular to the body and the body is defined by one coordinate line. This system is mapped in to a rectangular computational domain in which the governing flow field equations are solved numerically. Advantages of this technique are that the specification of boundary conditions are simplified and, most importantly, the entire flow field can be obtained, including flow in the wake. Good agreement has been obtained with experimental data for pressure distributions, density distributions, and heat transfer over spheres and cylinders in supersonic flow. Approximations to the Viking aeroshell and to a candidate Jupiter probe are presented and flow fields over these shapes are calculated.

Gnoffo, P. A.↗
NASA NTRS1991

An overview of the results of the FIFE-87 and FIFE-89 campaigns

Results of a major land surface-atmosphere exchange study, the First ISLSCP Field Experiment (FIFE) are summarized. Findings result from nearly 80 days of field measurements over a 15 kilometer square area involving 30 science teams, seven remote sensing aircraft, and 5 satellites which acquired over 1200 low resolution and 35 high spatial resolution satellite images, maps of remotely sensed temperature, vegetation index and soil moisture, surface flux measurements from more than 20 ground stations and airborne sensors, and transects of vegetation, soil moisture and soil chemistry. Relationships between in situ, airborne, and spaceborne remote measurements and the problem of scaling will be discussed. Energy balance comparisons among sites were made. Diurnal measurements of latent heat fluxes indicated a strong correlation between the evaporative fraction at midday and the daytime average value.

Murphy, R. E.↗
NASA NTRS1991

Thermal structure and dynamics of Neptune's atmosphere from Voyager measurements

The thermal structure of the Neptunian atmosphere between 50 and 10 mbar is characterized using spatially resolved Voyager IR spectra from a global mapping sequence. A zonal mean meridional temperature cross section was obtained which shows a minimum in the upper tropospheric and lower stratospheric temperatures at the southern mid-latitudes, and maxima at the equator and at high southern latitudes. This structure is qualitatively similar to the thermal structure of the Uranian atmosphere, even though the obliquities and the internal heat fluxes of the two planets are quite different.

Conrath, B. J.↗
NASA NTRS1998

Control of Oscillatory Thermocapillary Convection in Microgravity

This project focused on the generation and suppression of oscillatory thermocapillary convection in a thin liquid layer. The bulk of the research was experimental in nature, some theoretical work was also done. ne first phase of this research generated, for the first time, the hydrothermal-wave instability predicted by Smith and Davis in 1983. In addition, the behavior of the fluid layer under a number of conditions was investigated and catalogued. A transition map for the instability of buoyancy-thermocapillary convection was prepared which presented results in terms of apparatus-dependent and apparatus-independent parameters, for ease of comparison with theoretical results. The second phase of this research demonstrated the suppression of these hydrothermal waves through an active, feed-forward control strategy employing a CO2 laser to selectively heat lines of negative disturbance temperature on the free surface of the liquid layer. An initial attempt at this control was only partially successful, employing a thermocouple inserted slightly below the free surface of the liquid to generate the control scheme. Subsequent efforts, however, were completely successful in suppressing oscillations in a portion of the layer by utilizing data from an infrared image of the free surface to compute hydrothermal-wave phase speeds and, using these, to tailor the control scheme to each passing wave.

Skarda, Ray↗
NASA NTRS2003

Catalyzed Combustion of Bipropellants for Micro-Spacecraft Propulsion

This paper addresses the need to understand the physics and chemistry involved in propellant combustion processes in micro-scale combustors for propulsion systems on micro-spacecraft. These spacecraft are planned to have a mass less than 50 kilograms with attitude control estimated to be in the 10 milli-Newton thrust class. These combustors are anticipated to be manufactured using Micro Electrical Mechanical Systems (MEMS) technology and are expected to have diameters approaching the quenching diameter of the propellants. Combustors of this size are expected to benefit significantly from surface catalysis processes. Miniature flame tube apparatus is chosen for this study because microtubes can be easily fabricated from known catalyst materials and their simplicity in geometry can be used in fundamental simulations for validation purposes. Experimentally, we investigated the role of catalytically active surfaces within 0.4 and 0.8 mm internal diameter microtubes, with special emphases on ignition processes in fuel rich gaseous hydrogen and gaseous oxygen. Flame thickness and reaction zone thickness calculations predict that the diameters of our test apparatus are below the quenching diameter of the propellants in sub-atmospheric tests. Temperature and pressure rise in resistively heated platinum and palladium microtubes was used as an indication of exothermic reactions. Specific data on mass flow versus preheat temperature required to achieve ignition are presented. With a plug flow model, the experimental conditions were simulated with detailed gas-phase chemistry, thermodynamic properties, and surface kinetics. Computational results generally support the experimental findings, but suggest an experimental mapping of the exit temperature and composition is needed.

Schneider, Steven J.↗
NASA NTRS2007

Hydrodynamical Simulations of the Jet in the Symbiotic Star MWC 560: Application to X-ray Jets in Symbiotic Stars - 3

In Papers I and II in this series, we presented hydrodynamical simulations of jet models with parameters representative of the symbiotic system MWC 560. These were simulations of a pulsed, initially underdense jet in a high-density ambient medium. Since the pulsed emission of the jet creates internal shocks and since the jet velocity is very high, the jet bow shock and the internal shocks are heated to high temperatures and should therefore emit X-ray radiation. In this paper, we investigate in detail the X-ray properties of the jets in our models. We have focused our study on the total X-ray luminosity and its temporal variability, the resulting spectra, and the spatial distribution of the emission. Temperature and density maps from our hydrodynamical simulations with radiative cooling presented in the second paper are used, together with emissivities calculated with the atomic database ATOMDB. The jets in our models show extended and variable X-ray emission, which can be characterized as a sum of hot and warm components with temperatures that are consistent with observations of CH Cyg and R Aqr. The X-ray spectra of our model jets show emission-line features that correspond to observed features in the spectra of CH Cyg. The innermost parts of our pulsed jets show iron line emission in the 6.4-6.7 keV range, which may explain such emission from the central source in R Aqr. We conclude that MWC 560 should be detectable with Chandra or XMM-Newton, and such X-ray observations will prove crucial for understanding jets in symbiotic stars.

hydrodynamics↗
NASA NTRS1977

Temperature dependence of Fe/++/ crystal field spectra - Implications to mineralogical mapping of planetary surfaces

Results are reported of Fe(++) crystal field spectral measurements for olivines and pyroxenes up to 400 C. The results are correlated with crystal structure data at elevated temperatures, and the validity of remote-sensed identifications of minerals on hot surfaces of the moon and Mercury is assessed. Two techniques were used to obtain spectra of minerals at elevated temperatures using a spectrophotometer. One employed a diamond cell assembly or a specially designed sample holder to measure polarized absorption spectra of heated single crystals. For the other technique, a sample holder was designed to attach to a diffuse reflectance accessory to produce reflectance spectra of heated powdered samples. Polarized absorption spectra of forsterite at 20-400 C are shown in a graph. Other graphs show the temperature dependence of Fe(++) crystal field bands in olivines, the diffuse reflectance spectra of olivine at 40-400 C, the polarization absorption spectra of orthopyroxene at 30-400 C, the diffuse reflectance spectra of pigeonite at 40-400 C, and unpolarized absorption spectra of lunar pyroxene from Apollo 15 rock 15058.

Sung, C.-M.↗
NASA NTRS2012

Finite Element Models for Electron Beam Freeform Fabrication Process

Electron beam freeform fabrication (EBF3) is a member of an emerging class of direct manufacturing processes known as solid freeform fabrication (SFF); another member of the class is the laser deposition process. Successful application of the EBF3 process requires precise control of a number of process parameters such as the EB power, speed, and metal feed rate in order to ensure thermal management; good fusion between the substrate and the first layer and between successive layers; minimize part distortion and residual stresses; and control the microstructure of the finished product. This is the only effort thus far that has addressed computer simulation of the EBF3 process. The models developed in this effort can assist in reducing the number of trials in the laboratory or on the shop floor while making high-quality parts. With some modifications, their use can be further extended to the simulation of laser, TIG (tungsten inert gas), and other deposition processes. A solid mechanics-based finite element code, ABAQUS, was chosen as the primary engine in developing these models whereas a computational fluid dynamics (CFD) code, Fluent, was used in a support role. Several innovative concepts were developed, some of which are highlighted below. These concepts were implemented in a number of new computer models either in the form of stand-alone programs or as user subroutines for ABAQUS and Fluent codes. A database of thermo-physical, mechanical, fluid, and metallurgical properties of stainless steel 304 was developed. Computing models for Gaussian and raster modes of the electron beam heat input were developed. Also, new schemes were devised to account for the heat sink effect during the deposition process. These innovations, and others, lead to improved models for thermal management and prediction of transient/residual stresses and distortions. Two approaches for the prediction of microstructure were pursued. The first was an empirical approach involving the computation of thermal gradient, solidification rate, and velocity (G,R,V) coupled with the use of a solidification map that should be known a priori. The second approach relies completely on computer simulation. For this purpose a criterion for the prediction of morphology was proposed, which was combined with three alternative models for the prediction of microstructure; one based on solidification kinetics, the second on phase diagram, and the third on differential scanning calorimetry data. The last was found to be the simplest and the most versatile; it can be used with multicomponent alloys and rapid solidification without any additional difficulty. For the purpose of (limited) experimental validation, finite element models developed in this effort were applied to three different shapes made of stainless steel 304 material, designed expressly for this effort with an increasing level of complexity. These finite element models require large computation time, especially when applied to deposits with multiple adjacent beads and layers. This problem can be overcome, to some extent, by the use of fast, multi-core computers. Also, due to their numerical nature coupled with the fact that solid mechanics- based models are being used to represent the material behavior in liquid and vapor phases as well, the models have some inherent approximations that become more pronounced when dealing with multi-bead and multi-layer deposits.

Chandra, Umesh↗
NASA NTRS2003

Infrared Spectroscopy as a Chemical Fingerprinting Tool

Infrared (IR) spectroscopy is a powerful analytical tool in the chemical fingerprinting of materials. Any sample material that will interact with infrared light produces a spectrum and, although normally associated with organic materials, inorganic compounds may also be infrared active. The technique is rapid, reproducible and usually non-invasive to the sample. That it is non-invasive allows for additional characterization of the original material using other analytical techniques including thermal analysis and RAMAN spectroscopic techniques. With the appropriate accessories, the technique can be used to examine samples in liquid, solid or gas phase. Both aqueous and non-aqueous free-flowing solutions can be analyzed, as can viscous liquids such as heavy oils and greases. Solid samples of varying sizes and shapes may also be examined and with the addition of microscopic IR (microspectroscopy) capabilities, minute materials such as single fibers and threads may be analyzed. With the addition of appropriate software, microspectroscopy can be used for automated discrete point or compositional surface area mapping, with the latter providing a means to record changes in the chemical composition of a material surface over a defined area. Due to the ability to characterize gaseous samples, IR spectroscopy can also be coupled with thermal processes such as thermogravimetric (TG) analyses to provide both thermal and chemical data in a single run. In this configuration, solids (or liquids) heated in a TG analyzer undergo decomposition, with the evolving gases directed into the IR spectrometer. Thus, information is provided on the thermal properties of a material and the order in which its chemical constituents are broken down during incremental heating. Specific examples of these varied applications will be cited, with data interpretation and method limitations further discussed.

Huff, Timothy L.↗
NASA NTRS1984

Troposphere-stratosphere (surface-55 km) monthly general circulation statistics for the Northern Hemisphere-four year averages

This report presents four year averages of monthly mean Northern Hemisphere general circulation statistics for the period from 1 December 1978 through 30 November 1982. Computations start with daily maps of temperature for 18 pressure levels between 1000 and 0.4 mb that were supplied by NOAA/NMC. Geopotential height and geostrophic wind are constructed using the hydrostatic and geostrophic formulae. Fields presented in this report are zonally averaged temperature, mean zonal wind, and amplitude and phase of the planetary waves in geopotential height with zonal wavenumbers 1-3. The northward fluxes of heat and eastward momentum by the standing and transient eddies along with their wavenumber decomposition and Eliassen-Palm flux propagation vectors and divergences by the standing and transient eddies along with their wavenumber decomposition are also given. Large annual and interannual variations are found in each quantity especially in the stratosphere in accordance with the changes in the planetary wave activity. The results are shown both in graphic and tabular form.

Wu, M. F.↗
NASA NTRS1986

The Orion star-forming region - Far-infrared and radio molecular observations

New J = 1-0 CO and far-infrared maps of the Orion star-forming region are presented and discussed. The total infrared luminosity of the Orion star-forming ridge is 250,000 solar luminosities. The material that is emitting strongly at 60 microns is traced and found to be highly centrally concentrated. However, the majority of the extended emission from this region comes from dust that is ultimately heated by the visible Trapezium cluster stars. The luminosity of IRc 2, the most luminous member of the infrared cluster, is estimated to be 40,000-50,000 solar luminosities. A schematic drawing of the Ori MC 1 region is presented.

Thronson, H. A., Jr.↗
NASA NTRS2022

Albuquerque Urban Development: Enhancing Urban Cooling Interventions by Modeling Urban Forestry through NASA Earth Observations in Albuquerque, New Mexico

The City of Albuquerque, New Mexico is experiencing increasing urban heat island(UHI) effects, which impact the health, safety, and comfort of the community. In partnership with the City of Albuquerque Department of Environmental Health, Department of Parks and Recreation, and Let’s Plant Albuquerque!, this project used satellite Earth observations from April 2016–August 2022 to model increases in tree canopy within the City of Albuquerque to help combat the urban heat island in the city’s warmer areas over the next decade. Using Landsat 8’s Thermal Infrared Sensor (TIRS) and the Ecosystem Spaceborne Thermal Radiometer Experiment on the International Space Station (ECOSTRESS), along with the Integrated Valuation of Ecosystem Services and Tradeoffs (InVEST) Urban Cooling and ENVI-Met models, the team modeled tree cover interventions and created land surface temperature maps. These outputs will help the city make data-driven decisions for their tree planting goal in a targeted approach.

Max Stewart↗
NASA NTRS1979

A summary of research on the NASA-Global Atmospheric Sampling Program performed by the Atmospheric Sciences Research Center

The annual variations of ozone near the tropopause are derived from aircraft exhibit year-to-year differences which are not explicitly accounted for by the simple, classical ozone transport theory. Phenomena such as tropopause lifting, interannual variations in the rates of stratospheric-tropospheric exchange and meridional mixing, contribute differently to the distribution of ozone in this altitude region. Ozone encounter climatologies have been represented by global maps which show the probabilities of exceeding ambient ozone levels of 200, 300, and 400 ppbV along flight routes during the year. Continuous ozone records obtained from the GASP system revealed the presence of gravity waves whose wavelength is of the order 20 km. The GASP data cannot, however, be utilized for the evaluation of horizontal fluxes of such quantities as ozone, sensible heat, and zonal momentum; the data are too sparsely and irregularly distributed for the computation of stable correlations. Multiple species data from the unique circumglobal flight of a Pan American airliner on 28-30 October 1977 are discussed with particular regard to the apparent interhemispheric differences in tropospheric species concentrations, variation between the Arctic and Antarctic stratospheres, to possible covariations between species, and to potential source regions for various constituents.

Falconer, P. D.↗
NASA NTRS1985

Dual frequency observations of solar microwave bursts using the VLA

Simultaneous VLA observations of microwave bursts at 6 and 2 cm in a solar active region are presented and discussed. Using the full-day synthesis, I and V maps of the active region are produced. The radiation mechanisms at these wavelengths are discussed and the upper and lower bounds on the magnetic field of the active region are derived. The magnetic fields in the microwave burst source are estimated from the brightness temperature and the degree of circular polarization. It is concluded that the 6 cm radiation originates from the bulk heated plasma, whereas the 2 cm radiation is due to the nonthermal particles generated in the energy-release process. The delay between the peaks of emission at the two wavelengths is interpreted using a dc electric field model of flares. Depending on the strength of the electric field and the density in the flaring region, delays in either sense can be observed.

Shevgaonkar, R. K.↗
NASA NTRS2001

Combining New Satellite Tools and Models to Examine Role of Mesoscale Interactions in Formation and Intensification of Tropical Cyclones

The objective of this research is to start filling the mesoscale gap to improve understanding and probability forecasts of formation and intensity variations of tropical cyclones. Sampling by aircraft equipped to measure mesoscale processes is expensive, thus confined in place and time. Hence we turn to satellite products. This paper reports preliminary results of a tropical cyclone genesis and early intensification study. We explore the role of mesoscale processes using a combination of products from TRMM, QuikSCAT, AMSU, also SSM/I, geosynchronous and model output. Major emphasis is on the role of merging mesoscale vortices. These initially form in midlevel stratiform cloud. When they form in regions of lowered Rossby radius of deformation (strong background vorticity) the mesoscale vortices can last long enough to interact and merge, with the weaker vortex losing vorticity to the stronger, which can then extend down to the surface. In an earlier cyclongenesis case (Oliver 1993) off Australia, intense deep convection occurred when the stronger vortex reached the surface; this vortex became the storm center while the weaker vortex was sheared out as the major rainband. In our study of Atlantic tropical cyclones originating from African waves, we use QuikSCAT to examine surface winds in the African monsoon trough and in the vortices which move westward off the coast, which may or may not undergo genesis (defined by NHC as reaching TD, or tropical depression, with a west wind to the south of the surface low). We use AMSU mainly to examine development of warm cores. TRMM passive microwave TMI is used with SSM/I to look at the rain structure, which often indicates eye formation, and to look at the ice scattering signatures of deep convection. The TRMM precipitation radar, PR, when available, gives precipitation cross sections. So far we have detailed studies of two African-origin cyclones, one which became severe hurricane Floyd 1999, and the other reached TD2 in June 2000 and then died out. The atmosphere off West African is dry and stable. It becomes less so between June and September, as the SST and convection heat up. QuikSCAT shows the African monsoon trough and shear zone extend westward over the ocean to nearly 30 degrees West. The evidence is strong that the two cyclones had in common multiple midlevel mergers, which extended to the surface keeping the surface vortex strong. These continued until both systems were designated TD's by NHC. In the June 2000 case, the main reason for failure was the lower SST and dry, stable atmosphere. This is shown by the comparison of the equivalent potential temperature maps and profiles with those from pre-Floyd. In the vortex which became Floyd, QuikSCAT shows continuous importation of high theta e (warm, moist) air from the south. From September 2-8, this air flowed around the vortex center, building up a high theta-e pool to the north. Then late on September 9, a 100-km wide jet of high theta-e air penetrated the vortex core, a major convective burst' was observed, and an intensifying, more elevated warm core was seen on AMSU. Rapid pressure fall and wind intensification were underway by 0000 UTC on September 10. Floyd became a Hurricane at 1200 UTC on Sept 10, 1999, with successive convective bursts running the hurricane thermodynamic engine by intensifying the warm core. TD2 was a strong African vortex, sustained by moderate convection (up to about 12.5 km) offshore of Africa. It peaked on June 23, showing an apparent "eye" on passive microwave composites. However, it could not assemble the ingredients for a convective burst. Thus it failed to get the thermodynamic hurricane engine going before it moved too far west of the region of lowered Rossby radius. By June 26, cloud systems were dying out. On June 25, a surface vortex was no longer seen on QuikSCAT, although one continued above the surface on model profiles until June 27. One of our main findings so far is showing the role of the mesoscale vortex interactions in sustaining some African vortices far out in to the mid Atlantic, where under adequate thermal/moisture conditions the hurricane heat engine can sometimes be started. We are working on similar studies of Cindy and Irene 1999. Cindy illustrates a case of wind shear working against an early-stage hurricane heat engine, while Irene formed from a Caribbean wave. An enormous value of combinations of satellite tools is that tropical cyclones can be studied in all parts of the global oceans where they occur. Detailed studies like ours are labor intensive but many statistical studies can be based on physical postulates developed. There are other new tools such as MODIS on TERRA of the Earth Observing System (EOS) which can be used to study the microphysics of tropical cyclones world wide, in particular to investigate the presence of mixed phase and the impact of atmospheric aerosols on the hydrometeor structure and rainfall from tropical cyclones.

Simpson, Joanne↗
NASA NTRS1987

GOES Satellite Observations for the FIRE/SRB Wisconsin Experiment Region from October 11 Through November 2, 1986

A map, concise tables, and satellite images are presented which show ground-site locations, GOES visible/infrared instrument counts above each site, and cloud spatial distribution for the experiment region from 11 October through 2 November 1986. The cloud images are presented near times of the afternoon NOAA-9 satellite overpasses in order to provide a qualitative aid in the interpretation of TOVS, AVHRR, and heat budget data during the FIRE/SRB experiment.

Whitlock, Charles H.↗