Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “geophysical data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Polarimetric Remote Sensing of Geophysical Medium Structures

Polarimetric remote sensing of structures in geophysical media is studied in this paper based on their symmetry properties. Orientations of spheroidal scatterers described by spherical, uniform, planophile, plagiothile, erectophile, and extremophile distributions are considered to derive their polarimetric backscattering characteristics. These distributions can be identified from the observed scattering coefficients by comparison with theoretical symmetry calculations. A new parameter is defined to study scattering structures in geophysical media. Experimental observations from polarimetric data acquired by the Jet Propulsion Laboratory airborne synthetic aperture radar over forests, sea ice, and sea surface are presented to illustrate the use of symmetry properties. For forests, the coniferous forest in Mount Shasta area and mixed forests neir Presque Isle show evidence of the centrical symmetry at C band. In sea ice from the Beaufort Sea, multiyear sea ice has a cross-polarized ratio e close to e(sub 0), calculated from symmetry, due to the randomness in the scattering structure. For first-year sea ice, e is much smaller than e(sub 0) as a result of preferential alignment of the columnar structure of the ice. From polarimetric data of a sea surface in the Bering sea, it is observed that e and e(sub 0) are increasing with incident angle and e is greater than e(sub 0) at L band because of the directional feature of sea surface waves. Use of symmetry properties of geophysical media for polarimetric radar calibration is also suggested.

Nghiem, S. V.↗
NASA NTRS1979

Seasat low-rate data system

The Seasat low-rate data system, an end-to-end data-processing and data-distribution system for the four low-rate sensors (radar altimeter, Seasat-A scatterometer system, scanning multichannel microwave radiometer, and visible and infrared radiometer) carried aboard the satellite, is discussed. The function of the distributed, nonreal-time, magnetic-tape system is to apply necessary calibrations, corrections, and conversions to yield geophysically meaningful products from raw telemetry data. The algorithms developed for processing data from the different sensors are described, together with the data catalogs compiled.

Brown, J. W.↗
NASA NTRS1993

Characterization of the Marquez Dome buried impact crater using gravity and magnetic data

The buried impact crater, Marquez Dome, located in Leon County in east central Texas, is an approximately 15 km diameter structure whose central uplift is now partially exposed due to headward erosion of the post-impact cover. The central uplift is approximately 3 km in diameter and the rocks within it have been uplifted more than 1200 m above their regional level. The crater rim remains buried and previous attempts to determine its location have had to rely on seismic reflection data and geologic well logs. These attempts have been somewhat successful in mapping the extent of the disturbed zone around Marquez Dome, but more limited in their ability to image the shallow buried rim. In an attempt to define accurately the whole Marquez Dome structure and assist in the selection of drilling sites, a geophysical investigation involving gravity and magnetic data over the central uplift and the surrounding area has been undertaken.

Wong, A. M.↗
DOE OSTI2021

Utah FORGE Composite Raw Gravity Data 2021

This is a composite raw gravity dataset of the Utah FORGE area taken over time from December 2018 to to June 2021. The data shows differences in local gravity at different location across Utah FORGE. Included with the gravity data is the NAD83 UTM coordinates of each station in meters. More detailed information can be found in the readme included in the data resource.

15 GEOTHERMAL ENERGY↗
DOE OSTI2025

EGS Collab Experiment 2: Continuous Active Source Seismic Monitoring (CASSM)

The dataset contains continuous active-source seismic monitoring (CASSM) data collected during EGS Collab Experiment 2, conducted from February to September 2022 at the Sanford Underground Research Facility in Lead, South Dakota. This experiment aimed to investigate enhanced geothermal systems through high-pressure fluid injections at depths of 1200-1500 meters. The seismic monitoring system included 16 three-component piezoelectric accelerometers and 24 hydrophones installed in boreholes around the injection zones, recording signals from piezoelectric seismic sources. Data were acquired using both continuous and triggered recording systems, with sampling rates of up to 100 kHz. The raw data are organized by timestamps and stored in .dat format, with accompanying log files. Calibration certificates for selected accelerometers are provided to aid in correcting sensor responses, though users are advised to consider possible effects of enclosures and installation on sensor performance. Users are strongly advised to consult the accompanying report, which outlines the experimental setup, data acquisition, sensor specifications, and recording systems.

15 GEOTHERMAL ENERGY↗
DOE OSTI2023

DEEPEN Leapfrog Geodata Model Cleaned and Reformatted Exploration Datasets from Newberry Volcano

DEEPEN stands for DE-risking Exploration of geothermal Plays in magmatic ENvironments. As part of the DEEPEN 3D play fairway analysis (PFA) conducted at Newberry Volcano for multiple play types (conventional hydrothermal, superhot EGS, and supercritical), existing geoscientific exploration datasets needed to be acquired, cleaned, reformatted, and assembled in Leapfrog Geothermal. This GDR submission includes all of the cleaned and reformatted (X (m), Y (m), elevation (m), processed data values) datasets used to build the Leapfrog Geodata model. Existing datasets were acquired from the GDR, from AltaRock, and from other sources. This yielded the following datasets: - Digital elevation model produced from LiDAR data by Ramsey and Bard, 2016 - MT surveys from 2006, 2011, 2014, and 2017 (including single inversions) - Gravity surveys from 2006, 2007, and 2011 (including single) - Earthquake catalogs from PNSN, LLNL, and the Newberry EGS Demonstration project - Seismic velocity model from Templeton et al., 2014 - The Frone, 2015 temperature model and a new one produced through extrapolating downhole temperature measurements and the SMU temperature at depth maps. Two versions of the new model are provided: 250 m spacing and 500 m spacing - EarthVision geologic model with alteration from Moser et al., 2016 - Well data from EGS well 55-29, deep geothermal wells, coreholes (GEO N-2 through 5) and several thermal gradient holes - "Newberry Well Data:" Location, simple lithology, directional survey data, and temperature data for the 34 wells and coreholes used in the Newberry PFA Although there are additional 2D datasets available in the area, such as aeromagnetic surveys, these were not included in the analysis. While it may be possible to project these datasets into three dimensions by assuming the surface measurements do not vary with depth, this method is associated with high uncertainty. Preexisting inversions of these data were unavailable, and inverting additional geophysical datasets is outside the scope of this project.

15 GEOTHERMAL ENERGY↗
NASA NTRS1975

Data management, chapter 5, part C

The data management for a spacecraft radar was defined in terms of an end-to-end data system, which performs the following three functions: (1) sampling and compaction of data onboard the spacecraft, (2) manipulation of radar data on the ground and (3) conversion of radar measurements to geophysical quantities by means of pattern recognition and other machine techniques. Data processing for imaging radar onboard the spacecraft was examined with the conclusion that several techniques can be used to compact the data before storage. It is recommended that compaction techniques be studied further and that existing aircraft radars be modified to provide digital data so that these compaction techniques can be tested.

Source record↗
DOE OSTI2022

Deep-learning-guided high-resolution subsurface reflectivity imaging with application to ground-penetrating radar data

Subsurface reflectivity imaging is one of the most important geophysical characterization methods for revealing subsurface structures. In many cases, accurate subsurface reflectivity imaging is challenging because of, for example, random or coherent noise in the data and sparse source-receiver observation geometry. Here, we develop a deep-learning-guided iterative imaging method to improve subsurface structure imaging. Specifically, we train a supervised neural network to infer a noise-free, high-resolution image from a noisy, low-resolution image and use this estimated image as guidance to regularize least-squares imaging. We develop a systematic method to generate high-quality synthetic training data (data-label pairs) to train the guidance neural network. The trained neural network can provide high-fidelity predictions even for field-data images that are not in the training data. We validate our new imaging method using one synthetic and two field ground-penetrating radar data examples, and find that our method can produce clean, high-resolution subsurface reflectivity images where existing single-pass and least-squares imaging methods fail due to noise and insufficient data coverage.

58 GEOSCIENCES↗
DOE OSTI2021

Brady Geodatabase for Geothermal Exploration Artificial Intelligence

These files contain the geodatabases related to Brady's Geothermal Field. It includes all input and output files for the Geothermal Exploration Artificial Intelligence. Input and output files are sorted into three categories: raw data, pre-processed data, and analysis (post-processed data). In each of these categories there are six additional types of raster catalogs which are titled Radar, SWIR, Thermal, Geophysics, Geology, and Wells. These inputs and outputs were used with the Geothermal Exploration Artificial Intelligence to identify indicators of blind geothermal systems at the Brady Hot Springs Geothermal Site. The included zip file is a geodatabase to be used with ArcGIS and the tar file is an inclusive database that encompasses the inputs and outputs for the Brady Hot Springs Geothermal Site.

15 GEOTHERMAL ENERGY↗
NASA NTRS1992

Flank solar wind interaction

This report summarizes the results of the first 12 months of our program to study the interaction of the Earth's magnetosphere with the solar wind on the far flanks of the bow shock. This study employs data from the ISEE-3 spacecraft during its traversals of the Earth's magnetotail and correlative data from spacecraft monitoring the solar wind upstream. Our main effort to date has involved assembling data sets and developing new plotting programs. Two talks were given at the Spring Meeting of the American Geophysical Union describing our initial results from analyzing data from the far flank foreshock and magnetosheath. The following sections summarize our results.

Moses, Stewart L.↗
NASA NTRS1984

Data base management: MSTRAC (keynote paper), part 8

Technical Aspects of MST radars were discussed. The name of the group is MST Radar Coordination (MSTRAC). The geophysical parameters to be included in the sample data tapes were determined. It was suggested that MSTRAC compile a catalog of existing data at each of the facilities. It is found that: (1) there is a community of interested users for MST data; (2) the initial responses from observatories indicates that interest in MSTRAC is not overwhelming, probably because of time involved; and (3) the program needs reassessment.

Avery, S. K.↗
DOE OSTI2025

The propagation of seismic waves, misinformation, and disinformation from the 2024-10-05 M 4.5 Iran earthquake

The 2024-10-05 Iran M 4.5 earthquake took place at a time of heightened tensions in the Middle East. We perform a discrimination and moment tensor analysis and identify a shallow-dipping, reverse fault source commensurate with the compressional setting of the Iranian interior. Nonetheless, the event's aftermath saw widespread dissemination of misinformation, and potentially active disinformation, concluding that it was in fact a test of an Iranian nuclear weapon. The 'evidence' for many of these claims was based on inaccurate interpretation of seismic data. In this paper, we analyze how geophysical 'fake news' propagated through social media (mainly Twitter/X) following this event, eventually gaining traction in mainstream, earned media. This event is an illustrative warning of how seismic data can be misinterpreted and/or manipulated in public discourse.

58 GEOSCIENCES↗
NASA NTRS1982

Spherical harmonic representation of the main geomagnetic field for world charting and investigations of some fundamental problems of physics and geophysics

Progress in the harmonic analysis of MAGSAT data is reported. Single-day data sets were subdivided into information on the sunrise side of the Earth and information on the sunset side of the Earth. Data for the main and external fields each demonstrate a clear and consistent systematic difference between the sets of data which was determined to be, due to ionospheric currents which differ from the sunset to the sunrise terminator. A toroidal field was analyzed for and determined to be an apparent toroidal field resulting from electric currents concentrated in the two terminators. Progressive elimination of auroral zone data demonstrates that the information presented does not arise from complications due to Birkeland currents.

Barraclough, D. R.↗
NASA NTRS2012

Preservation of Data for Earth System Science- Towards a Content Standard

Various remote sensing agencies of the world have created a data rich environment for research and applications over the last three decades. Especially over the last decade, the volume and variety of data useful for Earth system science have increased quite rapidly. One of the key purposes of collecting these data and generating useful digital products containing derived geophysical parameters is to study the long-term trends in the Earth s behavior. Long-term observational data and derived products are essential for validating results from models that predict the future behavior of the Earth system. Given the significant resources expended in gathering the observational data and developing the derived products, it is important to preserve them for the benefit of future generations of users. Preservation involves maintaining the bits with no loss (or loss within scientifically acceptable bounds) as they move across systems as well as over time, ensuring readability over time, and providing for long-term understandability and repeatability of previously obtained results. In order to ensure long-term understandability and repeatability, it is necessary to identify all items of content that must be preserved and plan for such preservation. This paper discusses the need for a standard enumerating and describing such content items and reports on the progress made by NASA and the Federation of Earth Science Information Partners (ESIP Federation) in the U.S. towards such a standard.

Ramapriyan, Hampapuram↗
NASA NTRS2003

IGS 2000 Annual Report

Contents: The IGS Governing Board 2000; Central Bureau Status 2000; Growth of the IGS Network in 2000; Analysis Activities; Data Center Activities 2000; The International Terrestrial Reference Frame; IGS Reference Frame Coordination and Working Group Activities; The IGS/BIPM Time and Frequency Pilot Project; IGS Activities in the Area of the Ionosphere 2000; IGS Tropospheric Products; IGS International GLONASS Service Pilot Project; IGS LEO Pilot Project; Continuous GPS Positioning of Tide Gauges.

GLONASS↗
NASA NTRS2000

Case Study Analyses of the Success DC-8 Scanning Lidar Database

Under project SUCCESS (Subsonic Aircraft Contrail and Cloud Effects Special Study) funded by the Atmospheric Effects of Aviation Program, SRI International (SRI) developed an angular scanning back'scatter lidar for operation on the NASA DC-8 research aircraft and deployed the scanning lidar during the SUCCESS field campaign. The primary purpose of the lidar was to generate real-time video displays of clouds and contrails above, ahead of, and below the DC-8 as a means to help position the aircraft for optimum cloud and contrail sampling by onboard in situ sensors, and to help extend the geometrical domain of the in situ sampling records. A large, relatively complex lidar database was collected and several data examples were processed to illustrate the value of the lidar data for interpreting the other data records collected during SUCCESS. These data examples were used to develop a journal publication for the special SUCCESS Geophysical Research Letters issue (reprint presented as Appendix A). The data examples justified data analyses of a larger part of the DC-8 lidar database and is the objective of the current study.

Uthe, Edward E.↗
DOE OSTI2024

Modular Subsurface Sensors and Integrated Software for Advanced Subsurface Characterization and Monitoring using Unoccupied Vehicles

The advent and subsequent proliferation of autonomous airborne, waterborne, and groundbased vehicles (i.e., “drones”) promises to broadly transform the geosciences and associated industries, including fossil energy exploration and development, mineral resource exploration and development, water-resource management, and environmental remediation. For geophysical characterization and monitoring, the prospect of programming highly repeatable and low-cost drone missions for subsurface imaging will allow for deployments in hazardous and previously inaccessible areas. Coupled with autonomous workflows for data processing, management, and visualization, drone-based geophysical characterization and monitoring will enable unprecedented, real-time insight into diverse subsurface properties and processes of scientific and engineering importance. Toward this end, the objectives of this Lab Directed Research and Development (LDRD) project were to develop new (1) instrumentation for dronebased electromagnetic induction (EMI) geophysical imaging, including separated transmitter and receivers and associated electronics, (2) software for real-time data telemetry, processing, management, and visualization. Although EMI has been previously deployed using unoccupied aerial systems (UASs), these applications failed to capitalize on the game-changing capabilities of drone platforms. Whereas drone-based data acquisition allows for collection of rich, three-dimensional (3D) multi-offset/multi-angle configurations between transmitters and receivers, past efforts have relied on conventional instrumentation that was designed for ground-based data collection with the transmitter and a single receiver housed in the same unit; nor did these previous applications demonstrate real-time delivery of results to support rapid management decisions in the field. In this 1-year project, we (1) designed and constructed new lightweight independent transmitter and receiver antenna platforms that communicate with a laptop computer; (2) developed software to control data acquisition, manage/transfer data, and visualize data as its collected; and (3) demonstrated the operation of the new hardware and software systems in a ground-based field test. Our work entails major technological advances for EMI and established a foundation on which to build a new drone-based, real-time geophysical EMI imaging capability to support diverse challenges facing the nation.

47 OTHER INSTRUMENTATION↗