SEARCH · Engineering Papers

Results for “functional properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

All sources NASA NTRS DOE OSTI

NASA NTRS1980

International solar polar mission

The key configurations and characteristics of the two International Solar Polar Mission (ISPM) spacecraft are described. The primary mission objectives of the ISPM are to investigate, as a function of solar latitude, the properties of the solar corona, the solar wind, the sun/wind interface, the heliospheric magnetic field, solar and nonsolar cosmic rays, and the interstellar/interplanetary neutral gas and dust. In addition, instrumentation is included to detect the gamma ray bursts; it is hoped to pinpoint the sources of these bursts by using triangulation from each spacecraft and the Earth.

Miller, R. B.↗

NASA NTRS1980

Fracture and crack growth in orthotropic laminates

Solutions are developed for the two dimensional region containing unidirectional fibers with initial damage in the form of a notch, a rectangular cut out, and a circular hole. An ultimate stress failure criterion is used for both the fibers and the matrix, simple tension for the fibers, and shear failure for the matrix. Models which account for longitudinal matrix yielding and splitting as well as transverse matrix yielding and fiber breakage as a function of initial damage, material properties, and applied stress are presented. For ductile matrix composites the results indicate that longitudinal matrix yielding and transverse notch extension are the most significant forms of damage. The extent of the stable transverse damage is shown to be approximately constant, independent of initial notch length. In the case of brittle matrix composites (graphite/epoxy) longitudinal splitting is shown to be the dominant form of damage.

Goree, J. G.↗

NASA NTRS1982

Chemisorption of CO on particulate deposits of platinum

Morphology and CO chemisorption properties are studied as a function of particle size for the case of particulate Pt films, vapor-deposited onto ultrahigh vacuum-cleaved and heat-treated mica surfaces at a 200 C substrate temperature. The particles were found to be mostly irregular in shape and randomly-oriented, with two desorption peaks after CO absorption at 60 C: (1) an alpha peak, at 120 C, attributed to smooth particle surfaces, and (2) a beta peak, at about 175 C, attributed to particle edges and steps. Transmission electron microscopy showed that major changes occur in particle morphology during absorption-desorption cycling, so that the decrease in CO desorption flux may be interpreted as due to particle restructuring, rather than contamination by CO decomposition as in the cases of Ni or Pd on mica. Auger electron spectroscopy corroborates the lack of CO decomposition, even for the case of very small Pt particles.

Doering, D. L.↗

NASA NTRS1983

The ISPM Mission - Science objectives and mission overview

The International Solar Polar Mission (ISPM) will, for the first time, allow exploration of the heliosphere within a few astronomical units of the sun over the full range of heliographic latitudes. The prime mission objective is to study, as a function of solar latitude, the properties of the interplanetary medium and solar corona. The scientific instrumentation is designed to explore, in the third heliospheric dimension, the properties of the solar wind, the sun/wind interface, the heliospheric magnetic field, solar radio bursts and plasma waves, solar X-rays, solar and galactic cosmic rays, and interplanetary/interstellar neutral gas and dust. ISPM will also detect cosmic gamma-ray bursts and search for gravitational waves. ISPM is a cooperative mission carried out jointly by ESA and NASA, to be launched in May 1986 and utilising a Jupiter gravity-assist to achieve a high-solar-latitude trajectory.

Wenzel, K.-P.↗

NASA NTRS1983

Data processing techniques used with MST radars: A review

The data processing methods used in high power radar probing of the middle atmosphere are examined. The radar acts as a spatial filter on the small scale refractivity fluctuations in the medium. The characteristics of the received signals are related to the statistical properties of these fluctuations. A functional outline of the components of a radar system is given. Most computation intensive tasks are carried out by the processor. The processor computes a statistical function of the received signals, simultaneously for a large number of ranges. The slow fading of atmospheric signals is used to reduce the data input rate to the processor by coherent integration. The inherent range resolution of the radar experiments can be improved significant with the use of pseudonoise phase codes to modulate the transmitted pulses and a corresponding decoding operation on the received signals. Commutability of the decoding and coherent integration operations is used to obtain a significant reduction in computations. The limitations of the processors are outlined. At the next level of data reduction, the measured function is parameterized by a few spectral moments that can be related to physical processes in the medium. The problems encountered in estimating the spectral moments in the presence of strong ground clutter, external interference, and noise are discussed. The graphical and statistical analysis of the inferred parameters are outlined. The requirements for special purpose processors for MST radars are discussed.

Rastogi, P. K.↗

NASA NTRS1984

The effect of tantalum and carbon on the structure/properties of a single crystal nickel-base superalloy

The microstructure, phase chemistry, and creep and hot tensile properties were studied as a function of tantalum and carbon levels in Mar-M247 type single crystal alloys. Microstructural studies showed that several types of carbides (MC, M23C6 and M5C) are present in the normal carbon (0.10 wt % C) alloys after heat treatment. In general, the composition of the MC carbides changes from titanium rich to tantalum rich as the tantalum level in the alloy increases. Small M23C6 carbides are present in all alloys. Tungsten rich M6C carbides are also observed in the alloy containing no tantalum. No carbides are present in the low carbon (0.01 wt % C) alloy series. The morphology of gamma prime is observed to be sensitive to heat treatment and tantalum level in the alloy. Cuboidal gamma prime is present in all the as cast structures. After heat treatment, the gamma prime precipitates tend to have a more spheroidal like morphology, and this tendency increases as the tantalum level decreases. On prolonged aging, the gamma prime reverts back to a cuboidal morphology or under stress at high temperatures, forms a rafted structure. The weight fraction and lattice parameter of the spheroidal gamma prime increases with increasing tantalum content. Changes in the phase chemistry of the gamma prime matrix and gamma prime have also been analyzed using phase extraction techniques. The partitioning ratio decreases for tungsten and aluminum and increases for tantalum as the tantalum content increases for both alloy series; no significant changes occur in the partitioning ratios of the other alloying elements. A reduction in secondary creep rate and an increase in rupture time result from increasing the tantalum content and decreasing the carbon level.

Nguyen, H. C.↗

NASA NTRS1985

Atmospheric and Science Complexity Effects on Surface Bidirectional Reflectance

Among the tools used in passive remote sensing of Earth resources in the visible and near-infrared spectral regions are measurements of spectral signature and bidirectional reflectance functions (BDRFs). Determination of surface properties using these observables is complicated by a number of factors, including: (1) mixing of surface components, such as soil and vegetation, (2) multiple reflections of radiation due to complex geometry, such as in crop canopies, and (3) atmospheric effects. In order to bridge the diversity in these different approaches, there is a need for a fundamental physical understanding of the influence of the various effects and a quantiative measure of their relative importance. In particular, we consider scene complexity effects using the example of reflection by vegetative surfaces. The interaction of sunlight with a crop canopy and interpretation of the spectral and angular dependence of the emergent radiation is basically a multidimensional radiative transfer problem. The complex canopy geometry, underlying soil cover, and presence of diffuse as well as collimated illumination will modify the reflectance characteristics of the canopy relative to those of the individual elements.

Diner, D. J.↗

NASA NTRS1988

A nonparametric software reliability growth model

Miller and Sofer have presented a nonparametric method for estimating the failure rate of a software program. The method is based on the complete monotonicity property of the failure rate function, and uses a regression approach to obtain estimates of the current software failure rate. This completely monotone software model is extended. It is shown how it can also provide long-range predictions of future reliability growth. Preliminary testing indicates that the method is competitive with parametric approaches, while being more robust.

Miller, Douglas R.↗

NASA NTRS1990

High brightness neutral hydrogen in M31: A new probe of interstellar pressure

An observational parameter of our own Galaxy, the peak brightness temperature of neutral hydrogen in emission, was determined almost twenty years ago (Burton 1970). This quantity, although possessing a degree of local variations, has a remarkably consistent peak value of 125 K towards spiral arm segments with a few isolated peaks extending to 135 K, once sufficient spatial and velocity resolution are used (less than or equal to 70 pc, less than or equal to 5 km/s) to resolve the emission peaks. The higher spatial and velocity resolution of more recent surveys has not led to the detection of higher brightnesses. For many years this remarkable observational result has received little attention, primarily because similar data for other galaxies, which would allow a meaningful comparison and analysis, did not exist. Recently this situation has changed. A Westerbork survey of M33 (Deul and Van der Hulst 1987, and private comm.) with 40 pc x 8 km/s resolution has revealed consistent peak values of only 95 plus or minus 5 K (although there is still some question of whether the velocity resolution was sufficient in this case), while a Very Large Array (VLA) survey of M31 (Braun 1989a) with 35 pc x 5 km/s resolution has shown consistent peak values but at a temperature of 155 to 165 K. It has become clear that although peak HI brightness seems to be a well-defined quantity within individual galaxies (with a degree of local variation) there are very significant differences in this quantity amongst different galaxies. Researchers embarked on an observational program directed at a sample of 11 nearby galaxies: NGC 55, 247, 7793, 3031, 2366, 2403, 4236, 4826, 4736, 4244, and 5457. They hope to determine the gas properties and phases as a function of both galaxy type and position within the galaxies utilizing high resolution HI observations and optical narrow band imagery and spectroscopy which are now underway.

Braun, Robert↗

NASA NTRS1991

Results of examination of silvered Teflon from the Long Duration Exposure Facility

Pieces of silvered Teflon thermal control blanket from seventeen locations on the Long Duration Exposure Facility (LDEF) were studied. Results of the measurements of surface texturing, and mechanical, electrical and thermal properties are presented. Photos of the blankets, scanning electron microscope pictures, infrared spectra, and surface analysis results are presented. Contamination issues relative to performance of the blankets are discussed. The variation in measured properties are reported as a function of exposure conditions.

Rousslang, Ken W.↗

NASA NTRS1991

The redshift of the X-ray selected BL Lacertae object H0414 + 009

The X-ray selected BL Lac object H0414 + 009 has a redshift of 0.287; the optical spectrum is well described by the sum of a standard elliptical galaxy plus a relatively flat power law. The galaxy contributes about 40 percent of the light in the spectrum in the rest-frame V band, and is one of the most luminous galaxies known. The properties of H0414 + 009 are similar in all respects to a previously studied object, 1E 1415 + 259 at z = 0.237. If X-ray selected BL Lacs continue to be found in such bright galaxies, then the properties of studying their luminosity function and evolution are considerably enhanced. There is also possible evidence for intrinsic X-ray absorption by a warm medium, as has been found in several other BL Lacs.

Halpern, Jules P.↗

NASA NTRS1991

Do clusters of galaxies affect the spectrum of the microwave background?

The distortion, averaged over the sky, due to the Compton scattering of background photons with electrons in the hot gas in clusters of galaxies is calculated. Using an existing sample of X-ray clusters, various values of the density parameter Omega, and plausible models for cluster evolution, Monte Carlo realizations of the microwave sky are generated. The spatial structure of these simulations shows a network of discrete sources whose properties can be a strong function of both evolution and Omega. The amount of spectral distortion in the models is greatest for models characterized by self-similar cluster evolution in an open universe and is within an order of magnitude of the current upper limits. Thus, improved observational sensitivity must inevitably detect some deviation from a blackbody spectrum.

Markevitch, M.↗

NASA NTRS1991

Pultrusion process characterization

Pultrusion is a process through which high-modulus, lightweight composite structural members such as beams, truss components, stiffeners, etc., are manufactured. The pultrusion process, though a well-developed processing art, lacks a fundamental scientific understanding. The objective here was to determine, both experimentally and analytically, the process parameters most important in characterizing and optimizing the pultrusion of uniaxial fibers. The effects of process parameter interactions were experimentally examined as a function of the pultruded product properties. A numerical description based on these experimental results was developed. An analytical model of the pultrusion process was also developed. The objective of the modeling effort was the formulation of a two-dimensional heat transfer model and development of solutions for the governing differential equations using the finite element method.

Vaughan, James G.↗

NASA NTRS1992

Isothermal aging of IM7/8320 and IM7/5260

Isothermal aging was conducted on two composite systems being considered as possible candidates for the next generation supersonic transport. The composite systems were IM7/5260, a carbon/thermoset, and IM7/8320, a carbon/amorphous thermoplastic. The materials were isothermally aged for a total of 5000 hours at 125 C and 175 C. These temperatures are approximately equivalent to the upper skin temperatures of an aircraft flying at Mach 2.0 and Mach 2.4, respectively. The variations of the following properties were determined as a function of aging time: weight loss, moduli, glass transition temperature, microcracking, and modulus and strength of a +/- 45 laminate. The difficulties and accuracy of strain measurements are also discussed.

Martin, Roderick H.↗

NASA NTRS1990

Investigation of two and three parameter equations of state for cryogenic fluids

Two-phase flows are a common occurrence in cryogenic engines and an accurate evaluation of the heat-transfer coefficient in two-phase flow is of significant importance in their analysis and design. The thermodynamic equation of state plays a key role in calculating the heat transfer coefficient which is a function of thermodynamic and thermophysical properties. An investigation has been performed to study the performance of two- and three-parameter equations of state to calculate the compressibility factor of cryogenic fluids along the saturation loci. The two-parameter equations considered here are van der Waals and Redlich-Kwong equations of state. The three-parameter equation represented here is the generalized Benedict-Webb-Rubin (BWR) equation of Lee and Kesler. Results have been compared with the modified BWR equation of Bender and the extended BWR equations of Stewart. Seven cryogenic fluids have been tested; oxygen, hydrogen, helium, nitrogen, argon, neon, and air. The performance of the generalized BWR equation is poor for hydrogen and helium. The van der Waals equation is found to be inaccurate for air near the critical point. For helium, all three equations of state become inaccurate near the critical point.

Jenkins, Susan L.↗

NASA NTRS1992

Pluto's extended atmosphere - An escape model and initial observations

The observational determination of the extent, escape rate, and composition of Pluto's upper atmosphere is presently approached via calculations of the rates of production and hydrodynamic outflow of atomic H generated by methane photodissociation. Observations have been conducted with the IUE in order to detect atomic H's Lyman-alpha emission in the conjectured cloud; these results are used to derive cloud-property upper limits as a function of the extent of the cloud. It is concluded that the extent and density of the hydrogen atmosphere is more dependent on the escape process than on the atmospheric fraction of methane.

Clarke, John T.↗

NASA NTRS1992

Composite laminates with spatially varying fiber orientations - 'Variable stiffness panel concept'

A solution has been obtained to the plane elasticity problem for a symmetrically laminated composite panel with spatially varying fiber orientations. Since variation of the fiber angles along the length of a composite laminate results in stiffness properties that change as a function of location, the laminates are called variable stiffness panels. An analysis of the stiffness variation and its effect on the elastic response of the panel is presented here. A numerical solution has been obtained using an iterative collocation technique. Corresponding closed-form solutions are given for three different sets of boundary conditions. Two of the cases considered have exact solutions and thus serve to validate the numerical model.

Guerdal, Zafer↗

NASA NTRS1991

Optical properties of aerosol emissions from biomass burning in the tropics, BASE-A

Ground-based and airborne measurements of biomass-burning smoke particle optical properties, obtained with a view to aerosol-absorption properties, are presented as a function of time and atmospheric height. The wavelength dependence of the optical thickness can be explained by a log-normal size distribution, with particles' effective radius varying between 0.1 and 0.2 microns. The strong correlation noted between aerosol particle profile and CO profile indicates that smoke particulates constitute a good tracer for emission trace gases from tropical biomass burning.

Holben, Brent N.↗