SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The present work discusses the results of some experimental studies on the possibility of attenuating shock waves in a supersonic flow. The shock waves were formed by an external source of electrical energy. An electromechanical method is described that permits partial recovery of the expended energy.
Kaoline, a hydrated aluminum silicate clay, is investigated as a seeding material for laser velocimetry. It is inexpensive but is polydispersed with some of the fineparticles being too large to follow wind tunnel flow and is in the form of nonspherical platelets having an aspect ratio of approximately 4/1. Gravity sedimentation experiments as a means of narrowing the fineparticle sizes distribution are being conducted. The fineparticle size distribution of Engelhard ASP 200 kaolin suspended in ethanol (0.00792 grams kaolin/ml ethanol) as received, after 24 hours gravity sedimentation and after 48 hours sedimentation, respectively is shown. A shearing atomizer is used to inject the fineparticles. Gravity sedimentation is carried out in an 800 ml pyrex beaker. Following gravity sedimentation, the top 3.5 inches are siphoned from the liquid, which has a column height of 4.5 inches. In a like manner, longer settling times will serve to further narrow the fineparticle distribution range. As successive sedimentations are effected, the number of fineparticles per unit volume of ethanol decreased markedly.
The goal set forth here is to continue the work started by Braun et al. (1984-1985) and present an integrated analysis of the behavior of the two row, 20 staggered pockets, hydrostatic cryogenic bearing used by the turbopumps of the Space Shuttle main engine. The variable properties Reynolds equation is fully coupled with the two-dimensional fluid film energy equation. The three-dimensional equations of the shaft and bushing model the boundary conditions of the fluid film energy equation. The effects of shaft eccentricity, angular velocity, and inertia pressure drops at pocket edge are incorporated in the model. Their effects on the bearing fluid properties, load carrying capacity, mass flow, pressure, velocity, and temperature form the ultimate object of this paper.
The general structure of a viscoplastic theory is developed from physical and thermodynamical considerations. The flow equation is of classical form. The dynamic recovery approach is shown to be superior to the hardening function approach for incorporating nonlinear strain hardening into the material response through the evolutionary equation for back stress. A novel approach for introducing isotropic strain hardening into the theory is presented, which results in a useful simplification. In particular, the limiting stress for the kinematic saturation of state (not the drag stress) is the chosen scalar-valued state variable. The resulting simplification is that there is no coupling between dynamic and thermal recovery terms in each evolutionary equation. The derived theory of viscoplasticity has the structure of a two-surface plasticity theory when the response is plasticlike, and the structure of a Bailey-Orowan creep theory when the response is creeplike.
The efforts to fabricate single embedded filament specimens of carbon and SiC fibers were unsuccessful largely due to the thermal stresses resulting from differences in thermal coefficient of expansion. Other factors appear to have been involved including embrittlement of the metal substrate by the H2 gas in the chemical vapor deposition flow stream and reaction layers formed between the silicon carbide and the metal substrate. The carbon fiber may have been attacked by the CVD reactant. It is concluded that these differential stresses are so large as to make the embedded fiber test impractical for the study of interphase effects and stress transfer in fiber ceramic matrix systems.
The important role that field-aligned Birkeland currents play in solar terrestrial coupling processes has been known from satellite observations for twenty years. Many satellite have been launched since the last Solar-Terrestrial Symposium with instruments capable of investigating the characteristics of Birkeland currents and their relationship to visible and UV auroral forms, particle precipitation, and convection flow patterns. An important result that has emerged is the close relationship between large-scale Birkeland currents and the orientation of the interplanetary magnetic field. These observations emphasize the fact that Birkeland currents are involved in a wide range of space plasma processes which range from small-scale ionospheric instabilities and irregularities to global scale energy coupling processes between the magnetosphere and solar wind.
Homogeneous barotropic beta-plane turbulence is investigated, taking into account the effects of spatial inhomogeneity in the form of a zonal shear flows. Attention is given to the case of zonal flows that are barotropically stable and of larger scale than the resulting transient eddy field. Numerical simulations reveal that large-scale zonal flows alter the picture of classical beta-plane turbulence. It is found that the disturbance field penetrates to the largest scales of motion, that the larger disturbance scales show a tendency to meridional rather than zonal anisotropy, and that the initial spectral transfer rate away from an isotropic intermediate-scale source is enhanced by the shear-induced transfer associated with straining by the zonal flow.
The tektites in China are distributed on the north part of Australia - Southeastern Asia strewfield of tektite: Leizhou Peninsula of Guangdong Province and Hainan Island, and located exactly at the boundary between Zanjiang Formation and Beihai Formation. A new hypothesis is suggested: During the end of Lower Pleistocene, a comet of special components from the outer part of the Solar System approached the Earth, and then it was captured by the Earth, when it came approximately to the Roche's limet. It was crushed into countless fragments, detritus and dusts, which rotated around the Earth, probably far above the Earth's atmosphere, as a cloud ring. Under the action of crushing energy they could be in the situation of liquid-melt drop in the almost vacuum circumstances and the flow and bubble structure were formed. During their rotation the climate became anomalous and the violet Fe-Si concentration were formed on the surface of sediments. After a rather short time of rotation the unstable ring was broken and the fragments impacted on the hard ground instantaneously.
In this study, the unsteady, thin-layer Navier-Stokes equations are solved using a system of patched grids for a rotor-stator configuration of an axial turbine. The study examines the plurality of spinning modes that are present in such an interaction. The propagation of these modes is analyzed and appropriate grid spacing chosen in the far upstream and downstream regions to attenuate reflections from the computational boundaries. In addition, radiating boundary conditions are implemented based on the farfield acoustical behavior of the flow field. Results in the form of pressure amplitudes and the spectra of turbine tones are presented. Numerical results and experimental data are compared wherever possible. The numerical results are also shown to conform with the predictions of a kinematical analysis of the flowfield.
An imidized version of LARC-TPI was developed on NASA's request for use by both aerospace and electronic industries. Two batches of LARC-TPI 1500 Series, consisting of medium-flow and high-flow pellets with different inherent viscosities, are characterized for their dynamic and isothermal melt flow properties at 340 C, mechanical properties of extrudates, extrudate porosity, and degree of crystallinity. The Series shows significantly better melt flow properties than previosly examimed forms of this polymer.
Probe readily positionable in core of uniform flow in hypersonic wind tunnel. Formed of pair of mating cylindrical housings: transducer housing and pitot-tube housing. Pitot tube supported by adjustable wedge fairing attached to top of pitot-tube housing with semicircular foot. Probe adjusted both radially and circumferentially. In addition, pressure-sensing transducer cooled internally by water or other cooling fluid passing through annulus of cooling system.
The evolution of the vorticity in time for two-dimensional inviscid flow and in Lagrangian time for three-dimensional viscous flow is written in Hamiltonian form by introducing Bose operators. The addition of the viscous and convective terms, respectively, leads to an interpretation of the Hamiltonian contribution to the evolution as Langevin noise.
Using a code which is capable of evolving composite systems of collisionless matter and gas, we explore mergers like those thought responsible for the shells seen around many elliptical galaxies. If a small companion containing both gas and stars is accreted by a more massive primary, the stellar and gaseous debris are rapidly segregated: while the stars are free to oscillate back and forth in the primary's potential, thereby forming shells, the oppositely directed flows near the center of the primary effectively dissipate the orbital kinetic energy of the gas. Consequently, the gas settles into compact disks or rings in the nucleus of the primary, depending on orbital parameters. We note implications of these findings for the production of polar rings and the onset of nuclear activity in galaxies.
An experimental study is presented of the pressure fluctuations near jet exhaust streams made during unchoked operation of a turbojet engine and a 1-inch-diameter high-temperature model jet and during choked operation of various sizes of model jets with unheated air. The tests for unchoked operation indicate a random spectrum of rather narrow band width which varies in frequency content with axial position along the jet. Pressure surveys from the model tests along lines parallel to the 15 degree jet boundary indicate that the station of greatest pressure fluctuations is determined by the jet velocity and the radial distance, with a tendency of the maximum to shift downstream as either parameter is increased. From model tests the magnitude of the fluctuations appears to increase as about the second power of jet velocity at points just outside the jet boundary and as increasingly higher powers of jet velocity as distance from the boundary is increased. A laboratory method of noise reduction with model jets was found to produce large decreases in the magnitude of the lower-frequency components of the spectra and thereby also to reduce the total radiated energy. Choked operation of model jets with unheated air indicates the appearance of a discrete-frequency component of very large magnitude. Shadowgraph records of the flow show that this condition is associated with the appearance of flow formations suggestive of partly formed toroidal vortices in the vicinity of the shocks. Elimination of these formations is found to eliminate the discrete component and thereby to reduce the overall noise level.
Inert-gas diffuser provides protective gas cover for weld bead as it cools. Follows welding torch, maintaining continuous flow of argon over newly formed joint and prevents it from oxidizing. Helps to ensure welds of consistently high quality. Devised for plasma arc keyhole welding of plates of 0.25-in. or greater thickness, also used in tungsten/inert-gas and other plasma or arc welding processes.
Pultrusion is one of the composite processing technology, commonly recognized as a simple and cost-effective means for the manufacturing of fiber-reinforced, resin matrix composite parts with different regular geometries. Previously, because the majority of the pultruded composite parts were made of thermosetting resin matrix, emphasis of the analysis on the process has been on the conservation of energy from various sources, such as heat conduction and the curing kinetics of the resin system. Analysis on the flow aspect of the process was almost absent in the literature for thermosetting process. With the increasing uses of thermoplastic materials, it is desirable to obtain the detailed velocity and pressure profiles inside the pultrusion die. Using a modified Darcy's law for flow through porous media, closed form analytical solutions for the velocity and pressure distributions inside the pultrusion die are obtained for the first time. This enables us to estimate the magnitude of viscous dissipation and it's effects on the pultruded parts. Pulling forces refined in the pultrusion processing are also analyzed. The analytical model derived in this study can be used to advance our knowledge and control of the pultrusion process for fiber reinforced thermoplastic composite parts.
A unique plug-type heat flux gage probe was tested in the NASA Ames Research Center 2x9 turbulent flow duct facility. The probe was fabricated by welding a miniature dual active surface heat flux gage body to the end of a hollow metal cylindrical bolt containing a metal inner tube. Cooling air flows through the inner tube, impinges onto the back of the gage body and then flows out through the annulus formed between the inner tube and the hollow bolt wall. Heat flux was generated in the duct facility with a Huels arc heater. The duct had a rectangular cross section and one wall was fabricated from 2.54 centimeter thick thermal insulation rigid surface material mounted onto an aluminum plate. To measure heat flux, the probe was inserted through the plate and insulating materials with the from of the gage located flush with the hot gas-side insulation surface. Absorbed heat fluxes measured with the probe were compared with absorbed heat fluxes measured with six water-cooled reference calorimeters. These calorimeters were located in a water-cooled metal duct wall which was located across from the probe position. Correspondence of transient and steady heat fluxes measured with the reference calorimeters and heat flux gage probe was generally within a satisfactory plus or minus 10 percent. This good correspondence was achieved even though the much cooler probe caused a large surface temperature disruption of 1000K between the metal gage and the insulation. However, this temperature disruption did not seriously effect the accuracy of the heat flux measurement. A current application for dual active surface heat flux gages is for transient and steady absorbed heat flux, surface temperature and heat transfer coefficient measurements on the surface of an oxidizer turbine inlet deflector operating in a space shuttle test bed engine.
Magnetic reconnection between the interplanetary magnetic field (IMF) and the geomagnetic field is thought to play a major role in the transfer of solar wind momentum and energy to the magnetosphere. As the angle between the IMF and the geomagnetic field is changed at the bow of the magnetosphere, the topological record of the location of the reconnection region should be recorded in the magnetosheath and on the magnetopause along the flanks of the tail, because the super fast flow freezes strong magnetic gradients formed in the bow reconnection regions into the plasma downstream. In this report, we present results from a three-dimensional, magnetohydrodynamic (MHD), global numerical simulation code for the location of the separatrix between unconnected IMF magnetosheath field lines and reconnected field lines which penetrate the magnetopause and connect to the polar ionosphere. The angle between the IMF direction and the line where the separatrix crosses the magnetopause is shown to be a sensitive function of the IMF clock angle. We also explain how this behavior can be used to derive an approximate relation for the dependence of the cross-polar voltage on the IMF clock angle. We conclude with a note of caution concerning the importance of physical boundary conditions in magnetoplasma simulations.