Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “flow field”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Shock wave/turbulent boundary layer interaction in the flow field of a tri-dimension wind tunnel

The first results of a thorough experimental analysis of a strong three-dimensional shock-wave/turbulent boundary-layer interaction occurring in a three dimensional transonic channel are presented. The aim of this experiment is to help in the physical understanding of a complex field, including several separations, and to provide a well documented case to test computational methods. The flowfield has been probed in many points by means of a three-component laser Doppler velocimeter. The results presented relate only to the mean velocity field. They clearly show the formation in the flow of a strong vortical motion resulting from the shock wave interaction.

Benay, R.↗
NASA NTRS1991

General patterns of flow field growth - Aa and blocky lavas

Lava flowfields consist of one or more flows. Four ideal emplacement regimes are recognized: that for single flows and that for flowfields dominated by (1) widening, (2) thickening, or (3) lengthening, as a result of generating new flows. Most aa and blocky lavas belong to the flowfield widening or single-flow regimes. These two regimes are analyzed assuming advance is controlled by the distal core of a flow, where motion is treated as steady, uniform, and laminar. Because of low deformation rates, the distal core is also approximated to a Newtonian fluid. Widening and, possibly, lengthening are ultimately limited by crustal resistance. After a critical cooling interval, new flows are generated from the upper reaches of the flowfield. A simple relation is derived linking flowfield dimensions and underlying slope to eruption duration, independent of terms involving gravity or lava chemistry and rheology. The relation well describes field data from several volcanoes (involving lava compositions from K phonolitic tephrite to dacite). This supports the premise that the overall growth of aa and blocky flowfields is systematic and also suggests that such growth may be predictable at timescales greater than, or similar to, the emplacement times of major flows.

Kilburn, Christopher R. J.↗
NASA NTRS1975

The numerical simulation of low frequency unsteady transonic flow fields

The lowest order approximation to the Euler equations for unsteady, transonic flow about a thin airfoil is considered and a semiimplicit difference scheme is applied to a simplified governing equation which is a suitable modification of this approximation for low-frequency motion. In another approach the approximation first considered is retained as the governing equation and a semiimplicit difference scheme is employed. The computed results obtained in both cases are discussed.

Ballhaus, W. F.↗
NASA NTRS1989

Calculation of winged-body-like flow fields using an implicit upwind space-marching code

The Mach-8 flow past a 60-deg swept fin mounted on a 12-degree ramp has been simulated using a parabolized Navier-Stokes solver employing an upwind algorithm in order to investigate the interference patterns that develop when a bow shock impinges on a wing shock. Good agreement with experimental data is found downstream of the interaction for each of three meshes of varying grid point density and computed surface pressure and heat transfer. In the wedge flow region, some disagreement with experimental data is noted for both pressure and heat transfer.

Lawrence, Scott L.↗
NASA NTRS1990

An approximate method for calculating three-dimensional inviscid hypersonic flow fields

An approximate solution technique was developed for 3-D inviscid, hypersonic flows. The method employs Maslen's explicit pressure equation in addition to the assumption of approximate stream surfaces in the shock layer. This approximation represents a simplification to Maslen's asymmetric method. The present method presents a tractable procedure for computing the inviscid flow over 3-D surfaces at angle of attack. The solution procedure involves iteratively changing the shock shape in the subsonic-transonic region until the correct body shape is obtained. Beyond this region, the shock surface is determined using a marching procedure. Results are presented for a spherically blunted cone, paraboloid, and elliptic cone at angle of attack. The calculated surface pressures are compared with experimental data and finite difference solutions of the Euler equations. Shock shapes and profiles of pressure are also examined. Comparisons indicate the method adequately predicts shock layer properties on blunt bodies in hypersonic flow. The speed of the calculations makes the procedure attractive for engineering design applications.

Riley, Christopher J.↗
NASA NTRS1997

Blunt Body Near-Wake Flow Field at Mach 10

Tests were conducted in a Mach 10 air flow to examine the reattachment process of a free shear layer associated with the near wake of a 70 deg half angle, spherically blunted cone having a cylindrical after body. The nominal free-stream Reynolds number based on model diameter ranged from 0.25 x l0(exp 6) to 1 x l0(exp 6) and the angle of incidence set at 0 and +/- 20 deg. The present study was designed to complement previously reported Mach 6 perfect air tests as well as results obtained in several hypervelocity facilities capable of producing real gas effects. Surface heating rates were inferred from temperature time histories from coaxial surface thermocouples on the model forebody and thin film resistance gages along the model base and cylindrical after body. Limited forebody, base, and support sting surface pressures were obtained with piezoresistive Experimental results are compared to laminar perfect gas predictions provided by a 3-0 Navier Stokes code (NSHYP). Shear layer impingement on the instrumented cylindrical after body resulted in a localized heating maximum that was 16 to 18percent of the forebody stagnation point and a factor of 2 higher than laminar predictions, suggesting a transitional or turbulent shear layer. transducers.

Horvath, Thomas↗
NASA NTRS2014

Flow-Field Investigation of Gear-Flap Interaction on a Gulfstream Aircraft Model

Off-surface flow measurements of a high-fidelity 18% scale Gulfstream aircraft model in landing configuration with the main landing gear deployed are presented. Particle Image Velocimetry (PIV) and Laser Velocimetry (LV) were used to measure instantaneous velocities in the immediate vicinity of the main landing gear and its wake and near the inboard tip of the flap. These measurements were made during the third entry of a series of tests conducted in the NASA Langley Research Center (LaRC) 14- by 22-Foot Subsonic Tunnel (14 x 22) to obtain a comprehensive set of aeroacoustic measurements consisting of both aerodynamic and acoustic data. The majority of the off-body measurements were obtained at a freestream Mach number of 0.2, angle of attack of 3 degrees, and flap deflection angle of 39 degrees with the landing gear on. A limited amount of data was acquired with the landing gear off. LV was used to measure the velocity field in two planes upstream of the landing gear and to measure two velocity profiles in the landing gear wake. Stereo and 2-D PIV were used to measure the velocity field over a region extending from upstream of the landing gear to downstream of the flap trailing edge. Using a special traverse system installed under the tunnel floor, the velocity field was measured at 92 locations to obtain a comprehensive picture of the pertinent flow features and characteristics. The results clearly show distinct structures in the wake that can be associated with specific components on the landing gear and give insight into how the wake is entrained by the vortex at the inboard tip of the flap.

Yao, Chung-Sheng↗
NASA NTRS1974

Low speed wind tunnel flow field results for JT8D refan engines on the Boeing 727-200

Low speed flow angularity results are presented showing flow direction at the nacelle locations on the Boeing 727-200. Flow angle probes (yawheads) were used for measurements at side and center inlet positions on the aft fuselage. A range of flap settings were tested with flap angles of 0 deg, 15 deg, and 40 deg selected for investigation.

Easterbrook, W. G.↗
NASA NTRS1974

Laser velocimeter measurements of the helicopter rotor-induced flow field

The use of a two-color laser velocimeter to measure the flow velocities in the wake of a helicopter rotor is discussed, including methods for obtaining two components of both instantaneous and time-averaged velocities. Results are presented from an experiment using a 2.13 m diameter model helicopter rotor operating at a tip speed ratio of 0.18 in a wind tunnel. The location of the tip vortex from the preceding blade was determined on the advancing side, and the diameter of the vortex core was found to be 15 percent of the blade chord (1.5 percent of the radius). The effects of the airfoil's bound vorticity were observed in the velocity distributions vry near the blade. These effects suggest that the laser velocimeter may be used to determine the aerodynamic loading (circulation) at a spanwise station on the blade. Also, the structure and boundary of the time-averaged wake were investigated.

Biggers, J. C.↗
NASA NTRS1983

An assessment of flow-field simulation and measurement

The effectiveness of the instrumentation, techniques, and wind tunnel flow characterizations in the U.S. large scale wind tunnels for accuracy in making increasingly finer drag measurements on airfoils is assessed. The more reliable measurement is necessary due to refined designs of airfoils and the need to continue to improve the economic performance of commercial aircraft. Consequently, the effects of flows in wind tunnels, compared with those in the freestream environment, have become a critical factor. Dynamic flow properties in individual wind tunnels have to be documented in order to assure reproducible results. Laser velocimetry is a suitable tool for nonintrusive measurement of the mean velocity, turbulence intensity, and the shear stress in wind tunnel flowfields. It is suggested that future wind tunnel studies be designed to remain within the diagnostic capabilities available at the site.

Owen, F. K.↗
NASA NTRS1984

Viscous computation of a space shuttle flow field

A procedure is presented, as well as some results, to calculate the flow over the winged orbiter. This necessitates the use of two computer codes. A parabolized marching Navier-Stokes code is used to obtain the solution up to the bow shock-wing shock interaction region and for the region after the interaction. An unsteady Navier-Stokes code is to be used in the region of the shock interaction. Only resuls for the marching code are presented. For the flow conditions calculated, M infinity = 7.9, alpha = 25 deg, T(wall) = 540 R, Re(L) = 60728 per inch, laminar or turbulent, the PNS code was marched up to an X/L = 0.7 which is where the bow shock-wing shock interaction region occurs.

Chaussee, D. S.↗
NASA NTRS1988

Influence of bulk turbulence and entrance boundary layer thickness on the curved duct flow field

The influence of bulk turbulence and boundary layer thickness on the secondary flow development in a square, 90 degree turning duct was investigated. A three-dimensional laser velocimetry system was utilized to measure the mean and fluctuating components of velocity at six cross-planes in the duct. The results from this investigation, with entrance boundary layer thickness of 20 percent, were compared with the thin boundary layer results documented in NASA CR-174811. The axial velocity profiles, cross-flow velocities, and turbulence intensities were compared and evaluated with regard to the influence of bulk turbulence intensity and boundary layer thickness, and the influence was significant. The results of this investigation expand the 90 degree curved duct experimental data base to higher turbulence levels and thicker entrance boundary layers. The experimental results provide a challenging benchmark data base for computational fluid dynamics code development and validation. The variation of inlet bulk turbulence intensity provides additional information to aid in turbulence model evaluation.

Crawford, R. A.↗
NASA NTRS1978

Preliminary study of the effect of the turbulent flow field around complex surfaces on their acoustic characteristics

Fundamental theories for noise generated by flow over surfaces exist for only a few simple configurations. The role of turbulence in noise generation by complex surfaces should be essentially the same as for simple configurations. Examination of simple-surface theories indicates that the spatial distributions of the mean velocity and turbulence properties are sufficient to define the noise emission. Measurements of these flow properties were made for a number of simple and complex surfaces. The configurations were selected because of their acoustic characteristics are quite different. The spatial distribution of the turbulent flow properties around the complex surfaces and approximate theory are used to locate and describe the noise sources, and to qualitatively explain the varied acoustic characteristics.

Olsen, W. A.↗
NASA NTRS1985

Spectral methods for modeling supersonic chemically reacting flow fields

A numerical algorithm was developed for solving the equations describing chemically reacting supersonic flows. The algorithm employs a two-stage Runge-Kutta method for integrating the equations in time and a Chebyshev spectral method for integrating the equations in space. The accuracy and efficiency of the technique were assessed by comparison with an existing implicit finite-difference procedure for modeling chemically reacting flows. The comparison showed that the procedure presented yields equivalent accuracy on much coarser grids as compared to the finite-difference procedure with resultant significant gains in computational efficiency.

Drummond, J. P.↗