Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “enhanced kinetics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36
All sourcesNASA NTRSDOE OSTI
NASA NTRS2012

Direct Radiative Effect of Mineral Dust on the Development of African Easterly Wave in Late Summer, 2003-2007

Episodic events of both Saharan dust outbreaks and African Easterly Waves (AEWs) are observed to move westward over the eastern tropical Atlantic Ocean. The relationship between the warm, dry, and dusty Saharan Air Layer (SAL) on the nearby storms has been the subject of considerable debate. In this study, the Weather Research and Forecasting (WRF) model is used to investigate the radiative effect of dust on the development of AEWs during August and September, the months of maximum tropical cyclone activity, in years 2003-2007. The simulations show that dust radiative forcing enhances the convective instability of the environment. As a result, most AEWs intensify in the presence of a dust layer. The Lorenz energy cycle analysis reveals that the dust radiative forcing enhances the condensational heating, which elevates the zonal and eddy available potential energy. In turn, available potential energy is effectively converted to eddy kinetic energy, in which local convective overturning plays the primary role. The magnitude of the intensification effect depends on the initial environmental conditions, including moisture, baroclinity, and the depth of the boundary layer. We conclude that dust radiative forcing, albeit small, serves as a catalyst to promote local convection that facilitates AEW development.

Ma, Po-Lun↗
DOE OSTI2022

Tethered Small-Molecule Acceptors Simultaneously Enhance the Efficiency and Stability of Polymer Solar Cells

For polymer solar cells (PSCs), the mixture of polymer donors and small-molecule acceptors (SMAs) is fine-tuned to realize a favorable kinetically trapped morphology and thus a commercially viable device efficiency. However, the thermodynamic relaxation of the mixed domains within the blend raises concerns related to the long-term operational stability of the devices, especially in the record-holding Y-series SMAs. Here, a new class of dimeric Y6-based SMAs tethered with differential flexible spacers is reported to regulate their aggregation and relaxation behavior. In their polymer blends with PM6, it is found that they favor an improved structural order relative to that of Y6 counterpart. Most importantly, the tethered SMAs show large glass transition temperatures to suppress the thermodynamic relaxation in mixed domains. For the high-performing dimeric blend, an unprecedented open circuit voltage of 0.87 V is realized with a conversion efficiency of 17.85%, while those of regular Y6-base devices only reach 0.84 V and 16.93%, respectively. Most importantly, the dimer-based device possesses substantially reduced burn-in efficiency loss, retaining more than 80% of the initial efficiency after operating at the maximum power point under continuous illumination for 700 h. In conclusion, the tethering approach provides a new direction to develop PSCs with high efficiency and excellent operating stability.

14 SOLAR ENERGY↗
NASA NTRS1992

Cratering mechanics on Venus - Pressure enhancement by the atmospheric 'ocean'

The impedance match technique and EOSs of equations of state (EOSs) of geologically relevant materials are used to investigate cratering mechanics on Venus, specifically, the coupling of impactor kinetic energy and momentum into the target surface. These EOSs are modified to account for multiple shocks. Peak impact pressures from both first reflection and later reverberations are determined. These are compared to values obtained using an atmosphereless model, and the differences between and implications for atmosphere-affected and atmosphereless impacts are discussed.

Brackett, Robert A.↗
DOE OSTI2024

Chemical insights into ethyl acetate flames from experiment and kinetic modeling: Laminar burning velocity, speciation and NO$_x$ emission

Oxygenated fuels, such as alcohols, ethers, and esters, are promising alternatives to conventional fuels. These fuels can help reduce detrimental emissions like carbon monoxide and unburned hydrocarbons and enhance octane ratings. Among these oxygenates, ethyl acetate (EA), a small alkyl ester sourced from biomass, emerges as a clean, promising energy carrier. It serves as a surrogate fuel to facilitate investigations into the combustion behaviours of biodiesel. Despite its importance, the literature knowledge of EA combustion characteristics is limited. Therefore, this study aims to broaden the knowledge of the combustion behaviour of this type of oxygenated fuel compound. In this study, we measured the laminar burning velocities of EA by employing a heat flux burner and a closed combustion vessel over the equivalence ratios of 0.7 – 1.7, pressures of 1 – 10 bar and temperatures ranging from 353 – 423 K. Further, we also measured the NOx emissions in exhaust gas of the premixed flames fueled by EA/air for the first time over the equivalence ratio of 0.8 – 1.2. Additionally, we employed a non-premixed counterflow flame setup for extensive characterisation of species and their concentration under diverse conditions encompassing various strain rates and oxygen concentrations. Finally, we utilized these newly measured data to construct and validate a detailed kinetic model developed as part of this work. The newly developed model will help characterize the combustion properties of EA.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2024

CO 2 Uptake and Stability Enhancement in Vinyltrimethoxysilane‐Treated SBA‐15 Solid Amine‐Based Sorbents

Abstract Silica‐supported amine absorbents, including materials produced by tethering aminosilanes or infusion of poly(ethyleneimine), represent a promising class of materials for CO 2 capture applications, including direct air and point source capture. Various silica surface treatments and functionalization strategies are explored to enhance stability and CO 2 uptake in amine‐based solid sorbent systems. Here, the synthesis and characterization of novel vinyltrimethoxysilane‐treated Santa Barbara Amorphous‐15 (SBA‐15) supports and the corresponding enhancement in CO 2 uptake compared to various SBA‐15‐based control supports are presented. The relationship between CO 2 diffusion and amine efficiency in these systems is explored using a previously reported kinetic model. The synthesized materials are characterized with CO 2 and H 2 O isotherms, diffuse reflectance infrared Fourier transform spectroscopy, 1 H T 1 – T 2 relaxation correlation NMR, and rapid thermal cycling experiments. The novel support materials are shown to enable high amine efficiencies, approaching a fourfold improvement over standard SBA‐15‐supported amines, while simultaneously exhibiting excellent stability when cycled rapidly under humid conditions. As the poly(ethyleneimine) loadings are held constant across the various samples, enhancements in CO 2 uptake are attributed to differences in the way the poly(ethyleneimine) interacts with the support surface.

Vallace, Anthony↗
DOE OSTI2021

A kinetic evaluation on NO 2 formation in the post-flame region of pressurized oxy-combustion process

Pressurized oxy-combustion is a promising technology that can significantly re-duce the energy penalty associated with first generation oxy-combustion for CO 2 capture in coal-fired power plants. However, higher pressure enhances the production of strong acid gases, including NO 2 and SO 3 , aggravating the corrosion threat during flue gas re-circulation. In the flame region, high temperature NO x exists mainly as NO, while conversion from NO to NO 2 happened in post-flame region. In this study, the conversion of NO → NO 2 has been kinetically evaluated under representative post-flame conditions of pressurized oxy-combustion after validating the mechanism (80 species and 464 reactions), which includes nitrogen and sulfur chemistry based on GRI-MECH 3.0. The effects of residence time, temperature, pressure, major species (O 2 /H 2 O), and minor or trace species (CO/SO x ) on NO 2 formation are studied. The calculation results show that when pressure is increased from 1 to 15 bar, NO 2 is increased from 1 to 60 ppm, and the acid dew point increases by over 80°C. Higher pressure and temperature greatly reduce the time required to reach equilibrium. With increasing pressure and decreasing temperature, O plays a much more important role than HO 2 in the oxidation of NO. A higher water vapor content accelerates NO 2 formation in all cases by providing more O and HO 2 radicals. The addition of CO or SO 2 also promotes the formation of NO 2 . The NO 2 formation in a pressurized oxy-combustion furnace can be over 10 times that of an atmospheric air-combustion furnace.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2021

Effects of organic additives on calcium hydroxide crystallisation during lime slaking

Highlights: • Sucrose and lignosulfonate reduce the crystallite size of Ca(OH){sub 2}. • Lime slaking in sucrose solutions leads to Ca(OH)2 with irregular shape. • Lime slaking in presence of lignosulfonate leads to plate-like Ca(OH){sub 2} crystals. • Effects of additives are enhanced when introduced before slaking. • Additives stabilise the unstable edge faces of Ca(OH){sub 2} during ageing. Organic compounds, often used in cement systems as admixtures, may affect the crystallisation and carbonation kinetics of Ca(OH){sub 2}, an important phase of hydrated cement. Here, we investigated changes in Ca(OH){sub 2} morphology in the presence of 3 organic compounds, commonly encountered in cement and lime-based materials: sucrose, pectin and calcium lignosulfonate. The additives were introduced either before or after lime slaking to determine the influence of temperature. Ca(OH){sub 2} crystals and supernatant solutions were characterised at time of slaking and after 6 months of ageing using scanning electron microscopy, X-ray diffraction and optical emission spectroscopy. Our results indicate that the morphology of Ca(OH){sub 2} crystals is modified by the characteristics of the organic molecules which promote formation of Ca(OH){sub 2} with habits that can result in faster carbonation, an effect that is detrimental to cement used in reinforced concrete. These effects are enhanced when the additives are introduced before slaking, likely as a result of thermal degradation.

36 MATERIALS SCIENCE↗
NASA NTRS1998

2-deoxy-D-glucose-induced metabolic stress enhances resistance to Listeria monocytogenes infection in mice

Exposure to different forms of psychological and physiological stress can elicit a host stress response, which alters normal parameters of neuroendocrine homeostasis. The present study evaluated the influence of the metabolic stressor 2-deoxy-D-glucose (2-DG; a glucose analog, which when administered to rodents, induces acute periods of metabolic stress) on the capacity of mice to resist infection with the facultative intracellular bacterial pathogen Listeria monocytogenes. Female BDF1 mice were injected with 2-DG (500 mg/kg b. wt.) once every 48 h prior to, concurrent with, or after the onset of a sublethal dose of virulent L. monocytogenes. Kinetics of bacterial growth in mice were not altered if 2-DG was applied concurrently or after the start of the infection. In contrast, mice exposed to 2-DG prior to infection demonstrated an enhanced resistance to the listeria challenge. The enhanced bacterial clearance in vivo could not be explained by 2-DG exerting a toxic effect on the listeria, based on the results of two experiments. First, 2-DG did not inhibit listeria replication in trypticase soy broth. Second, replication of L. monocytogenes was not inhibited in bone marrow-derived macrophage cultures exposed to 2-DG. Production of neopterin and lysozyme, indicators of macrophage activation, were enhanced following exposure to 2-DG, which correlated with the increased resistance to L. monocytogenes. These results support the contention that the host response to 2-DG-induced metabolic stress can influence the capacity of the immune system to resist infection by certain classes of microbial pathogens.

Non-NASA Center↗
DOE OSTI2020

Long-range Doppler lidar measurements of wind turbine wakes and their interaction with turbulent atmospheric boundary-layer flow at Perdigao 2017

As part of the Perdigão 2017 campaign, vertical RHI (range-height indicator) scans with long-range pulsed Doppler wind lidars were performed aligned with the main wind direction and a wind turbine (WT) located on a mountain ridge. The measurements are used to not only retrieve flow velocities, but also their variance and - by using the turbulent broadening of the Doppler spectrum - also turbulent kinetic energy (TKE) dissipation rate. The study shows that turbulence in the WT wake is dependent on the turbulence of the inflow, but also on atmospheric stability. In stable atmospheric conditions, wakes could be analyzed up to five rotor diameters downstream (D) and showed the maximum turbulence in the wake at 2-3 D, whereas in unstable conditions, the maximum was found at 2 D and the wake could not be detected further than 3 D. A clear dependency of wake turbulence enhancement on inflow turbulence intensity is found, which levels out to no further enhancement at turbulence intensities of 30%.

17 WIND ENERGY↗
DOE OSTI2026

Flame dynamics and kinetic coupling of ammonia and dimethyl-ether in non-premixed cool and warm flames at elevated pressure

Developing advanced low-temperature combustion engines with ammonia-biofuel blends requires a comprehensive understanding of low-temperature flame dynamics and kinetic interactions between ammonia and oxygenated fuels at elevated pressures. This work aims to study the dynamics and kinetics of non-premixed Dimethyl Ether (DME)/Ammonia (NH 3 ) cool and warm flames, and their reignition to hot flames. A counterflow burner is employed to establish DME/NH 3 cool/warm flames at pressures up to 5 atm. The extinction limits of cool flame and the reignition limits of warm flame to hot flame are measured by varying NH 3 concentrations and compared to simulations to quantitatively examine the effects on DME/NH 3 flames. It is found that NH 3 inhibits low-temperature DME oxidation and results in lower cool flame extinction limits. Warm flames in the presence of NH 3 are observed for the first time, revealing a non-monotonic effect of NH 3 addition: a small amount of NH 3 presence enhances warm flame chemistry and promotes reignition to hot flames, while a high NH 3 concentration weakens the warm flame. This trend is further explained by 0-D PSR kinetic simulations and 1-D S-curve flame dynamic calculations. Three flame transition regimes between cool flames (CF), warm flames (WF), and hot flames (HF) by different levels of NH 3 additions at a specific strain rate are identified, namely WFHF reignition, WF-CF transition, and WF extinction. Reaction sensitivity analyses of OH at low temperatures show that NH3 inhibits DME oxidation through OH consumption via H-abstraction and the kinetic couplings of RO 2 /NH 2 , RO 2 /NO x , R/NO x , and O 2 QOOH/NO x further suppress the low-temperature branching. At intermediate-temperatures, NH 2 /NO x /HO 2 coupling promotes warm flames via the pathway NH 2 → H 2 NO → HNO → NO by converting O 2 → HO 2 → OH. At even higher NH₃ concentrations, radical termination reactions of NH 2 + NO/NO 2 and excessive OH consumption via H-abstraction inhibit the flame. The insights into the kinetic coupling between NH 3 and low-temperature chemistry at elevated pressure and its impact on the dynamics of cool-warm-hot flame transitions will contribute to advancing combustion technologies with reduced emissions and improved energy-efficiency.

42 ENGINEERING↗
NASA NTRS1976

The cause of the nova outburst

A large number of models are evolved for thermonuclear runaways in the hydrogen-rich envelopes of 1.00-solar-mass carbon-oxygen white dwarfs. Models characterized by enhanced CNO abundances satisfy the observations of the common nova outburst, ejecting from 10 to the 27th to 10 to the 29th power g at velocities of 200 to 2400 km/s and kinetic energies of 10 to the 44th to 10 to the 45th power erg. The theoretical light curves are similar to the observed light curves of common novae during the early stages of the outbursts. Explanations are given for the continuous ejection of mass which is observed for long times after the initial outbursts, for the relationship between maximum magnitude and the decline to minimum, and for the constant luminosity phase of the outburst and the oval shapes of the ejected nebulae. The analysis is extended to models with extreme enhancements of C-12 and to models which include infalling material in the evolution. The extreme C-12 studies result in outbursts which reach near-supernova proportions, while the accretion models result in light curves which resemble observed light curves quite closely. The accretion studies also demonstrate the need for enhanced abundances.

Starrfield, S.↗
NASA NTRS2025

Mars Ground Level Enhancements in the Context of the Solar Energetic Particle Clock

In this work we discuss the growing ensemble of solar particle events registered on the Martian surface, including their temporal appearance and solar sources. Solar energetic particle events from the surface of Mars have been observed starting soon after the August 2012 landing of the Radiation Assessment Detector onboard Curiosity. The Martian atmosphere prevents protons and heavy ions of up to 180 MeV/n kinetic energy from directly reaching the Martian surface. This cut-off is high enough to limit the number of solar energetic particle events measured on the surface to only 15 in ~12 ½ years. Yet we find in this analysis that Mars ground level enhancements follow the distinct SEP clock pattern as proton events observed at lower energies as reported in Posner, Richardson and Strauss (2024). Proton acceleration occurs predominantly near the solar surface, while transport to Mars incurs a delay in onset, and, as we show here, peak, that is a function of the longitudinal magnetic connection distance. between the foot point of solar wind magnetic field lines that intersect the Mars environment with the source longitude of the solar magnetic eruption. A distinct clustering of relative solar source locations at or near the Mars foot points at the Sun’s western limb is apparent, indicating lower flux thresholds from such preferred locations. Our findings have implications for astronaut safety at Mars.

Mars Ground Level Enhancements↗
DOE OSTI2022

Modeling ablator grain structure impacts in ICF implosions

High-density carbon is a leading ablator material for inertial confinement fusion (ICF). This and some other ablator materials have grain structure which is believed to introduce very small-scale (~nm) density inhomogeneity. In principle, such inhomogeneity can affect key ICF metrics like fuel compression and yield, by, for example, acting as a seed for instabilities and inducing mix between ablator and fuel. However, assessments of such effects are uncertain due to the difficulty of modeling this small-scale structure in ICF simulations, typically requiring reduced-resolution modeling that scales these features. We present a grain model and show both the impact of de-resolving grains and the complex mixing dynamics such structures can induce. We find that different methods for de-resolving grains can yield both different total deposition of kinetic energy perturbations and different fuel–ablator mixing. We then show a simple-to-implement approach for approximately conserving the deposition of perturbed kinetic energy and demonstrate that, for the present grain model and test cases, this approach yields a reasonably matched time history of mix width between less and more resolved grain models. The simulations here also demonstrate the complex interaction history between grain-induced mixing and instability around the fuel–ablator interface, showing, for example, that the grain-induced perturbations typically trigger instability of conduction-driven density gradients in the DT fuel, enhancing mix penetration early in the acceleration of the shell. Furthermore simulating both microscale and nanoscale grains, we find initial evidence for larger mixing in the microscale case of the present model, despite smaller deposited kinetic energy perturbation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Manipulating the Geometric and Electronic Structures of Manganese Nitrides for Ammonia Synthesis

Abstract Manganese (Mn) nitrides are important nitrogen (N) carriers for small‐scale intermittent ammonia (NH 3 ) synthesis. However, only 3∼8 % of lattice N are converted into NH 3 . In this study, the geometric and electronic structures of well‐defined Mn 4 N and Mn 2 N lattices were altered using transition metal heteroatoms (Cr, Fe, Co, Ni, Mo) to understand the driving force behind lattice N diffusion and extraction. Density Functional Theory (DFT) revealed that the binding of early hydrogenation product (NH) follows a linear relationship with lattice N over a wide range of close‐packed surfaces. But, the binding of NH 2 and NH 3 are more sensitive to the geometric and electronic structures. Further, the chemical bonding can be quantitatively characterized with the covalency derived from Crystal Orbital Hamiltonian Population (COHP). In the Eley Rideal‐Mars van Krevelan pathway, the overall NH 3 formation free energy ( ) and lattice N diffusion barrier ( ) are the respective thermodynamic and kinetic determining factors. Aided by a rate‐determining step (RDS) model, Mn 4 N modified with Fe, Co, Ni single‐atom dopants all show enhanced rates for NH 3 formation.

Shan, Nannan↗
DOE OSTI2026

Mitigation of polysulfide shuttle effect in Li-S batteries through catalytic disproportionation reaction

Polysulfides are poorly retained within porous cathodes and readily diffuse into the electrolyte over time, leading to the well-known shuttle effect that undermines the reversibility of Li-S batteries. Here, in this study, we demonstrate that catalytic disproportionation of polysulfides provides an effective pathway to suppress this process by rapidly converting dissolved species into solid sulfur and sulfides, thereby preventing their migration into the electrolyte. Fundamentally, the sluggish kinetics of sulfur redox reactions are responsible for the accumulation and redistribution of soluble polysulfides in the bulk electrolyte. By accelerating these kinetics, catalyzed disproportionation not only confines sulfur within the conductive cathode matrix but also promotes the homogeneous precipitation of Li₂S₂/Li₂S, which enhances electrochemical reversibility and cycling stability. Using nitrogen-doped carbon (NC800) as a model catalyst, we reveal its ability to drive a pseudo-16-electron reduction pathway, leading to a single dominant Li₂S product and uniform deposition within the porous framework. In contrast, a non-catalytic carbon (KB) yields multiple polysulfide intermediates and heterogeneous deposition. The mechanistic insights provided here highlight the pivotal role of catalytic disproportionation in reshaping sulfur redox pathways and offer a rational strategy for mitigating polysulfide shuttling in practical Li-S pouch cells.

25 ENERGY STORAGE↗
DOE OSTI2023

Characterizing Structure-Dependent TiS 2 /Water Interfaces Using Deep-Neural-Network-Assisted Molecular Dynamics

As a promising layered electrode material, TiS 2 -based capacitive deionization (CDI) devices for water desalination have attracted significant attention. However, TiS 2 /H 2 O interfacial features, potentially important for device optimization, remain unidentified. Using Deep Potential Molecular Dynamics (DPMD), we characterized distinct aqueous interfaces introduced by four TiS 2 terminations expected to be present as water intercalates into TiS 2 , namely, Armchair, Zigzag, Zigzag-L, and Zigzag-R. First, we assessed important representative physical properties of the system to validate the deep potentials (DPs). DPMD simulations agree well with experiments and first-principles simulations, suggesting the DPs are accurate and reliable. Subsequent simulations of these TiS 2 /water interfaces revealed how TiS 2 surface termination influences the structure of interfacial water. This effect is most evident in the first and second water layers close to the TiS 2 surface, and more pronounced when spontaneous dissociative adsorption of water occurs. The extent of water dissociation on each surface was evaluated using enhanced sampling. Zigzag-L is the only interface where proton transfer from adsorbed water to TiS 2 surface S atoms is thermodynamically and kinetically favored. The coexistence of surface four-fold-coordinated Ti (Ti 4c ) and one-fold-coordinated S (S 1c ) is found to be essential to making proton transfer feasible on the Zigzag-L surface. Furthermore, remaining unprotonated S 1c atoms can act as good proton acceptors after water dissociation. Thus, TiS 2 with Zigzag-L termination may be a surface to avoid in CDI device construction, given that pH fluctuations adversely affect performance. Furthermore, this work provides new understanding of TiS 2 /H 2 O interfacial features that could aid future design and optimization of TiS 2 -based CDI devices for water desalination.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗