Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electrostatic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36
All sourcesNASA NTRSDOE OSTI
NASA NTRS1999

An Overview of the Electrostatic Levitation Facility at Nasa's Marshall Space Flight Center

Containerless processing represents an important area of research in microgravity materials science. This method provides access to the metastable state of an undercooled melt. Containerless processing provides a high-purity environment for the study of reactive, high-temperature materials. Reduced gravity affords several benefits for containerless processing; for example, greatly reduced positioning forces are required and therefore samples of greater mass can be studied. Additionally, in reduced gravity larger specimens will maintain spherical shape which will facilitate modeling efforts. Space Systems/LORAL developed an Electrostatic Containerless Processing System (ESCAPES) as a materials science research tool for investigations of refractory solids and melts. ESCAPES is designed for the investigation of thermophysical properties, phase equilibria, metastable phase formation, undercooling and nucleation, time-temperature-transformation diagrams, and other aspects of materials processing. These capabilities are critical to the research programs of several Principal Investigators supported by the Microgravity Materials Science Program of NASA. NASA's Marshall Space Flight Center (MSFC) recently acquired the ESCAPES system from LORAL. MSFC is now developing a levitation facility in order to provide a critical resource to the microgravity materials science research community and to continue and enhance ground-based research in the support of the development of flight experiments during the transition to Space Station.

Rogers, Jan R.↗
NASA NTRS1999

Electrostatic Discharge (ESD) Failures in Thin Film Resistors

Field failures of nichrome thin film resistors have been investigated recently for several pieces of space flight hardware. These failures have involved resistance shifts ranging from a few percent to complete open circuits. Failure analysis and duplication of these failures have revealed that the failures were caused by electrostatic discharge. The failure characteristics and the circuit conditions necessary for failure have been studied for several types of thin film resistors including nichrome and tantalum nitride resistive elements. The effects of latent damage and resistive pattern design will also be discussed.

Hull, Scott M.↗
NASA NTRS1999

Electrostatic Hazard Considerations for ODC Solvent Replacement Selection Testing

ODC solvents are used to clean many critical substrates during solid rocket motor production operations. Electrostatic charge generation incidental to these cleaning operations can pose a major safety issue. Therefore, while determining the acceptability of various ODC replacement cleaners, one aspect of the selection criteria included determining the extent of electric charge generation during a typical solvent cleaning operation. A total of six candidate replacement cleaners, sixteen critical substrates, and two types of cleaning swatch materials were studied in simulated cleaning operations. Charge generation and accumulation effects were investigated by measuring the peak voltage and brush discharging effects associated with each cleaning process combination. In some cases, charge generation was found to be very severe. Using the conductivity information for each cleaner, the peak voltage data could in some cases, be qualitatively predicted. Test results indicated that severe charging effects could result in brush discharges that could potentially result in flash fire hazards when occurring in close proximity to flammable vapor/air mixtures. Process controls to effectively mitigate these hazards are discussed.

Fairbourn, Brad↗
NASA NTRS1998

An Overview of the Electrostatic Levitation Facility at NASA's Marshall Space Flight Center

Containerless processing represents an important area of research in microgravity materials science. This method provides access to the metastable state of an undercooled melt. Containerless processing provides a high-purity environment for the study of reactive, high-temperature materials. Reduced gravity affords several benefits for containerless processing, for example greatly reduced positioning forces are required and therefore samples of greater mass can be studied. Additionally in reduced gravity, larger specimens will maintain spherical shape which will facilitate modeling efforts. Space Systems/LORAL developed an Electrostatic Containerless Processing System (ESCAPES) as a materials science research tool for investigations of refractory solids and melts. ESCAPES is designed for the investigation of thermophysical properties, phase equilibria, metastable phase formation, undercooling and nucleation, time-temperature- transformation diagrams and other aspects of materials processing. These capabilities are critical to the research programs of several Principal Investigators supported by the Microgravity Materials Science Program of NASA. NASA's Marshall Space Flight Center (MSFC) recently acquired the ESCAPES system from LORAL. MSFC is now developing a levitation facility to provide a critical resource to the microgravity materials science research community to continue and enhance ground-based research in the support of the development of flight experiments during the transition to Space Station.

Rogers, Jan R.↗
NASA NTRS1999

An Overview of the MSFC Electrostatic Levitation Facility

Containerless processing represents an important area of research in microgravity materials science. This method provides access to the metastable state of an undercooled melt. Containerless processing provides a high-purity environment for the study of reactive, high-temperature materials. Reduced gravity affords several benefits for containerless processing, for example greatly reduced positioning forces are required and therefore samples of greater mass can be studied. Additionally in reduced gravity, larger specimens will maintain spherical shape which will facilitate modeling efforts. Space Systems/LORAL developed an Electrostatic Containerless Processing System (ESCAPES) as a materials science research tool for investigations of refractory solids and melts. ESCAPES is designed for the investigation of thermophysical properties, phase equilibria, metastable phase formation, undercooling and nucleation, time-temperature- transformation diagrams and other aspects of materials processing. These capabilities are critical to the research programs of several Principal Investigators supported by the Microgravity Materials Science Program of NASA.

Rogers, J. R.↗
NASA NTRS2000

Solidification Studies from the Electrostatic Levitation System at the Marshall Space Flight Center

Electrostatic levitation (ESL) provides a means to study molten materials in a high-purity environment, free from contact with a container. Many phenomena important to materials science can be studied in the ESL. Solidification of metals, alloys and undercooled materials represent an important topic for research in the ESL. Recent studies of metals and alloys during solidification in the ESL are reported. Measurements include time, temperature and transformation of metallic glass-forming alloys, solidification velocities, and microstructure,

Rogers, Jan R.↗
NASA NTRS2000

An Overview of the MSFC Electrostatic Levitation Facility

Electrostatic levitation (ESL) provides a means to study molten materials in a contamination-free environment, including no contact with a container. Many phenomena important to materials science can be studied in the ESL. Solidification of metals, alloys and undercooled materials represent an important topic for research in the ESL. Recent studies of metals and alloys during solidification in the ESL are reported. Measurements include time, temperature and transformation of metallic glass-forming alloys, solidification velocities, and microstructure. This multimedia report includes a video clip showing processing in the ESL, with descriptions of the different segments in the text.

Rogers, J. R.↗
NASA NTRS2000

Roles Played by Electrostatic Waves in Producing Radio Emissions

Processes in which electromagnetic radiation is produced directly or indirectly via intermediate waves are reviewed. It is shown that strict theoretical constraints exist for electrons to produce nonthermal levels of radiation directly by the Cerenkov or cyclotron resonances. In contrast, indirect emission processes in which intermediary plasma waves are converted into radiation are often favored on general and specific grounds. Four classes of mechanisms involving the conversion of electrostatic waves into radiation are linear mode conversion, hybrid linear/nonlinear mechanisms, nonlinear wave-wave and wave-particle processes, and radiation from localized wave packets. These processes are reviewed theoretically and observational evidence summarized for their occurrence. Strong evidence exists that specific nonlinear wave processes and mode conversion can explain quantitatively phenomena involving type III solar radio bursts and ionospheric emissions. On the other hand, no convincing evidence exists that magnetospheric continuum radiation is produced by mode conversion instead of nonlinear wave processes. Further research on these processes is needed.

Cairns, Iver H.↗
NASA NTRS1999

Microgravity Experiments to Evaluate Electrostatic Forces in Controlling Cohesion and Adhesion of Granular Materials

The bulk behavior of dispersed, fluidized, or undispersed stationary granular systems cannot be fully understood in terms of adhesive/cohesive properties without understanding the role of electrostatic forces acting at the level of the grains themselves. When grains adhere to a surface, or come in contact with one another in a stationary bulk mass, it is difficult to measure the forces acting on the grains, and the forces themselves that induced the cohesion and adhesion are changed. Even if a single grain were to be scrutinized in the laboratory, it might be difficult, perhaps impossible, to define the distribution and character of surface charging and the three-dimensional relationship that charges (electrons, holes) have to one another. The hypothesis that we propose to test in microgravity (for dielectric materials) is that adhesion and cohesion of granular matter are mediated primarily by dipole forces that do not require the presence of a net charge; in fact, nominally electrically neutral materials should express adhesive and cohesive behavior when the neutrality results from a balance of positive and negative charge carriers. Moreover, the use of net charge alone as a measure of the electrical nature of grain-to-grain relationships within a granular mass may be misleading. We believe that the dipole forces arise from the presence of randomly-distributed positive and negative fixed charge carriers on grains that give rise to a resultant dipole moment. These dipole forces have long-range attraction. Random charges are created whenever there is triboelectrical activity of a granular mass, that is, whenever the grains experience contact/separation sequences or friction.

Marshall, J.↗
NASA NTRS2000

Microencapsulation and Electrostatic Processing Method

Methods are provided for forming spherical multilamellar microcapsules having alternating hydrophilic and hydrophobic liquid layers, surrounded by flexible, semi-permeable hydrophobic or hydrophilic outer membranes which can be tailored specifically to control the diffusion rate. The methods of the invention rely on low shear mixing and liquid-liquid diffusion process and are particularly well suited for forming microcapsules containing both hydrophilic and hydrophobic drugs. These methods can be carried out in the absence of gravity and do not rely on density-driven phase separation, mechanical mixing or solvent evaporation phases. The methods include the process of forming, washing and filtering microcapsules. In addition, the methods contemplate coating microcapsules with ancillary coatings using an electrostatic field and free fluid electrophoresis of the microcapsules. The microcapsules produced by such methods are particularly useful in the delivery of pharmaceutical compositions.

Morrison, Dennis R.↗
NASA NTRS2000

Mission Advantages of Constant Power, Variable Isp Electrostatic Thrusters

Electric propulsion has moved from station-keeping capability for spacecraft to primary propulsion with the advent of both the Deep Space One asteroid flyby and geosynchronous spacecraft orbit insertion. In both cases notably more payload was delivered than would have been possible with chemical propulsion. To provide even greater improvements electrostatic thruster performance could be varied in specific impulse, but kept at constant power to provide better payload or trip time performance for different mission phases. Such variable specific impulse mission applications include geosynchronous and low earth orbit spacecraft stationkeeping and orbit insertion, geosynchronous reusable tug missions, and interplanetary probes. The application of variable specific impulse devices is shown to add from 5 to 15% payload for these missions. The challenges to building such devices include variable voltage power supplies and extending fuel throughput capabilities across the specific impulse range.

Oleson, Steven R.↗
NASA NTRS2001

Thermophysical Property Measurement and Materials Research in the NASA/MSFC Electrostatic Levitator

Containerless processing is an important tool for thermophysical property measurements and materials research. The freedom from a crucible allows processing of liquid materials in a metastable undercooled state, as well as allowing processing of high temperature and highly reactive melts. Electrostatic levitation (ESL) is a containerless method which provides a number of unique advantages, including the decoupling of positioning force from sample heating, the ability to operate in ultra-high vacuum or at moderate gas pressure (approximately 3 atm), and the ability to process non-conducting materials. ESL also has the potential to reduce internal flow velocities below those possible with electromagnetic, acoustic, or aero-acoustic techniques. The ESL facility at NASA's Marshall Space Flight Center (MSFC) is in use for thermophysical property measurements and materials research by a number of different internal and external investigators. The methods for obtaining access to the facility, as well as a summary of current capabilities and some future directions will be discussed.

Rogers, J. R.↗
NASA NTRS2000

High Undercooling of Ni59Nb41 Alloy in a Containerless Electrostatic Levitation Facility

Utilizing the containerless electrostatic levitation facility at NASA/MSFC, we were able to undercool the Ni59Nb41 (atomic) alloy by 210 K which was 160 degrees farther than the results of previous flight experiments. Undercoolings were clustered around 200 K during the repeated melting-freezing cycles on a single sample. Prior to this work, a metastable liquid separation had been presumed to limit the undercooling of this alloy. However, microstructural observations have revealed that undercooling was limited by crystal nucleation.

Robinson, M. B.↗
NASA NTRS2000

High Undercooling of Ni59Nb41 Alloy in a Containerless Electrostatic Levitation Facility

Utilizing the containerless electrostatic levitation facility at NASA/MSFC, we were able to undercool the Ni-59Nb-41 (atomic) alloy by 210 K which was 160 deg. farther than the results of previous flight experiments. Undercoolings were clustered around 200 K during the repeated melting-freezing cycles on a single sample. Prior to this work, a metastable liquid separation had been presumed to limit the undercooling of this alloy. However, microstructural observations have revealed that undercooling was limited by crystal nucleation.

Robinson, M. B.↗
NASA NTRS2001

Electrostatic Enhancement of Coagulation in Protoplanetary Nebulae

Microgravity experiments suggest that electrostatic forces (overwhelmed by normal Earth gravity) could greatly enhance cohesive strength of preplanetary aggregates. Cohesive forces may be 103 times larger than those for van der Waals adhesion. Additional information is contained in the original extended abstract.

Marshall, J.↗
NASA NTRS1999

Inertial Electrostatic Confinement Fusion: The Laser Elevator Solar System Survey for Propellants Abstract

Dr. Wayne Pryor worked on three projects this summer. These were: 1) Inertial Electrostatic Confinement; 2) The Laser Elevator; and 3) Solar System Survey for Propellants Abstract. We Assisted Jon Nadler from Richland Community College in assembling and operating a table-top nuclear fusion reactor. We successfully demonstrated neutron production in a deuterium plasma. Pryor also obtained basic spectroscopic information on the atomic and molecular emissions in the plasma. The second project consisted of the completion of a paper on a novel propulsion concept (due to Tom Meyer of Colorado, the first author): a laser sail that bounces light back to the laser source. Recycling the photons from source to sail perhaps 100-1000 times dramatically improves the energy efficiency of this system, which may become very important for high-velocity missions in the future. Lastly, we compiled a very basic inventory of solar system propellant resources, their locations, and their accessibility. This initial inventory concentrates on sunlight availability, water availability, and the difficulty (delta-velocity requirement and radiation environment) in getting there.

Pryor, Wayne↗
NASA NTRS2002

A Low Cost Electrostatically Focused TWT

Ring-loop circuits are well known for their simplicity, low cost, compactness, low mass, high gain and efficiency and absence of backward wave oscillations. Peak powers over 20 kw have been achieved. They also have low harmonic output and excellent phase performance. We have developed a double ring-loop circuit that permits electrostatic focusing of an electron beam to at least 0.4 micro pervs. This eliminates the magnet stack and further lowers cost and weight. It permits glass rod fastening of circuit elements as well as gun and collector assemblies, as is done in cathode ray tubes. Using CRT construction techniques, the TWT can be built on automated equipment.

Vancil, Bernard K.↗