Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electronics analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Thermal Stability of Quasi-1D NbS 3 Nanoribbons and Their Transformation to 2D NbS 2 : Insights from in Situ Electron Microscopy and Spectroscopy

Here in situ electron microscopy imaging and spectroscopy enabled us to study the evolution of quasi-1D NbS 3 -IV nanoribbons with respect to morphology and chemical structure at temperatures between room temperature and 1000 °C. Scanning transmission electron microscopy (STEM) experiments included imaging in the secondary electron, (transmitted) bright field, and high-angle annular dark-field modes while operating in the low kV regime. The results showed that NbS 3 -IV samples transform dramatically from smooth nanoribbons into highly textured configurations featuring polyhedral divots and steps. Similar in situ heating experiments conducted with aberration-corrected STEM revealed that bilayers of NbS 3 -IV chains convert topotactically into aligned 2H-NbS 2 sheets upon loss of sulfur. Atomic resolution imaging, fast Fourier transform analysis, and electron energy loss spectroscopy confirmed these chemical changes, from which we propose an atomistic mechanism for the NbS 3 -IV → 2H-NbS 2 conversion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optimization of processing parameters on the controlled growth of c-axis oriented ZnO nanorod arrays

Optimization of the growth time parameter was conducted to synthesize high-quality c-axis ZnO nanorod arrays. The effects of the parameter on the crystal growth and properties were systematically investigated. Our studies confirmed that the growth time influence the properties of ZnO nanorods where the crystallite size of the structures was increased at higher deposition time. Field emission scanning electron microsope analysis confirmed the morphologies structure of the ZnO nanorods. The ZnO nanostructures prepared under the optimized growth conditions showed an intense XRD peak which reveal a higher c-axis oriented ZnO nanorod arrays thus demonstrating the formation of defect free structure.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of GaN interlayer on polarity control of epitaxial ZnO thin films grown by molecular beam epitaxy

Epitaxial ZnO thin films were grown on nitrided (0001) sapphire substrates with an intervening GaN layer by rf-plasma-assisted molecular beam epitaxy. It was found that polarity of the ZnO epilayer could be controlled by modifying the GaN interlayer. ZnO grown on a distorted 3-nm-thick GaN interlayer has Zn-polarity while ZnO on a 20-nm-thick GaN interlayer with a high structural quality has O-polarity. High resolution transmission electron microscopy analysis indicates that the polarity of ZnO epilayer is controlled by the atomic structure of the interface between the ZnO buffer layer and the intervening GaN layer.

36 MATERIALS SCIENCE↗

Electron temperature gradient instability and transport analysis in NSTX and NSTX-U plasmas

Extensive linear and nonlinear simulations to study electron temperature gradient (ETG) stability and thermal transport in National Spherical Torus Experiment (NSTX) and NSTX-U plasmas were performed using the fully electromagnetic gyrokinetic code CGYRO. Linear simulations were performed to determine ETG thresholds in different discharges, showing that ETG modes in spherical tokamaks can present different scalings compared to conventional aspect-ratio tokamaks. Nonlinear gyrokinetic simulations were conducted for selected cases to calculate electron thermal transport and compare to experimental values. Results are also compared with those of ETG modes in the multi-mode model and the Trapped-Gyro-Landau-Fluid reduced model codes, to better understand their applicability in spherical tokamaks.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DENSITY DIAGNOSTICS OF CORONAL MASS EJECTION CORES WITH THE SOLAR DYNAMICS OBSERVATORY/ATMOSPHERIC IMAGING ASSEMBLY

In this Letter, we investigate the application of the intensity ratio from pairs of narrow-band images from the Atmospheric Imaging Assembly (AIA) on the Solar Dynamics Observatory, the Extreme Ultraviolet (EUV) Imager (EUVI) on board the Sun Earth Connection Coronal and Heliospheric Investigation, and the EUV Imaging Telescope (EIT) on board the Solar and Heliospheric Observatory, to density diagnostics of optically thin plasmas. By inspecting the filtered spectra allowed by each instrument's effective area, we find that ratios between AIA images in the 171 Å and 193 Å channels can be used to determine the plasma electron density at transition region temperatures. This diagnostic potential is due to a pair of O V transitions which dominate the effective spectra of these two channels at temperatures around ≈2.5-3.0 × 10{sup 5} K. The temperature and electron density ranges where the 171/193 ratio is density sensitive are relevant for the cores of accelerating coronal mass ejections (CMEs) in the inner solar corona. We discuss how AIA series of images can be used for simultaneous temperature and density diagnostics of CME cores.

79 ASTRONOMY AND ASTROPHYSICS↗

Structure Formation of Hexagonal Diamond: Ab Initio Calculations

The formation of structure of hexagonal diamond from graphite and cubic diamond is simulated with the density functional theory. Orthorhombic AB graphite transforms into hexagonal diamond under uniaxial compression at pressures above 61 GPa. The pressure should be higher than 57 GPa to form hexagonal diamond from AA graphite. Another possible way to obtain hexagonal diamond is uniaxial compression of cubic diamond under pressures from 300 to 380 GPa. The theoretical calculations were used to interpret the diffraction data obtained after X-ray diffraction and electron microscopic analysis of natural and synthetic diamond-like materials. We found that there are no crystals with ideal cubic and hexagonal structures in diamond-like carbon materials, and their structure is characterized by random packing of molecular layers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

d{sup 0} Half-Metallic Ferromagnetism in CaN and CaAs Pnictides: an Ab Initio Study

Conventional magnetism occurs in systems which contain transition metals or rare earth ions with partially filled d or f shells. It is theoretically predicted that compounds of groups IA and IIA with IV and V, in some structural phases, are ferromagnetic half-metals which made them new candidates for spintronics applications. Employing density functional theory (DFT), we investigate magnetism in binary compounds CaN and CaAs. Regarding the structure of analogous magnetic materials and experimental results of CaAs synthesis, we have considered two cubic structures: rocksalt (RS) and zincblende (ZB), and four hexagonal structures: NiAs, wurtzite (WZ), anti-NiAs, and NaO. The calculated results show that CaN in cubic, NiAs, and wurtzite structures, and CaAs only in zincblende phase have ferromagnetic ground states with a magnetic moment of 1 μ{sub B}. Electronic structure analysis of these materials indicates that magnetism originates from anion p states. Existence of flat p bands and consequently high density of states at the Fermi level of magnetic structures gives rise to Stoner spin splitting and spontaneous ferromagnetism.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Initial operation and data processing on a system for real-time evaluation of Thomson scattering signals on the Large Helical Device

A scalable system for real-time analysis of electron temperature and density based on signals from the Thomson scattering diagnostic, initially developed for and installed on the NSTX-U experiment, was recently adapted for the Large Helical Device and operated for the first time during plasma discharges. During its initial operation run, it routinely recorded and processed signals for four spatial points at the laser repetition rate of 30 Hz, well within the system’s rated capability for 60 Hz. We present examples of data collected from this initial run and describe subsequent adaptations to the analysis code to improve the fidelity of the temperature calculations.

47 OTHER INSTRUMENTATION↗

High-throughput exploration of thermoelectric and mechanical properties of amorphous NbO{sub 2} with transition metal additions

To increase the thermoelectric efficiency and reduce the thermal fatigue upon cyclic heat loading, alloying of amorphous NbO{sub 2} with all 3d and 5d transition metals has systematically been investigated using density functional theory. It was found that Ta fulfills the key design criteria, namely, enhancement of the Seebeck coefficient and positive Cauchy pressure (ductility gauge). These quantum mechanical predictions were validated by assessing the thermoelectric and elastic properties on combinatorial thin films, which is a high-throughput approach. The maximum power factor is 2813 μW m{sup −1} K{sup −2} for the Ta/Nb ratio of 0.25, which is a hundredfold increment compared to pure NbO{sub 2} and exceeds many oxide thermoelectrics. Based on the elasticity measurements, the consistency between theory and experiment for the Cauchy pressure was attained within 2%. On the basis of the electronic structure analysis, these configurations can be perceived as metallic, which is consistent with low electrical resistivity and ductile behavior. Furthermore, a pronounced quantum confinement effect occurs, which is identified as the physical origin for the Seebeck coefficient enhancement.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Initial operation and data processing on a system for real-time evaluation of Thomson scattering signals on the Large Helical Device

A scalable system for real-time analysis of electron temperature and density based on signals from the Thomson scattering diagnostic, initially developed for and installed on the NSTX-U experiment, was recently adapted for the Large Helical Device (LHD) and operated for the first time during plasma discharges. During its initial operation run, it routinely recorded and processed signals for four spatial points at the laser repetition rate of 30 Hz, well within the system's rated capability for 60 Hz. We present examples of data collected from this initial run and describe subsequent adaptations to the analysis code to improve the fidelity of the temperature calculations.

Thomson scattering, real-time, LHD, plasma diagnos↗

Effect of d electrons on defect properties in equiatomic NiCoCr and NiCoFeCr concentrated solid solution alloys

Here, the role of d electrons in determining distributions of formation and migration energies for point defects in equiatomic NiCoCr and NiCoFeCr concentrated solid solution alloys (CSAs) are studied regarding electron density deformation flexibility based on first-principles calculations. The disordered state is taken into account by constructing special quasirandom structures. The migration barriers are determined by directly optimizing the saddle point. It is found that the formation energies of interstitials in CSAs are lower than those in pure Ni, whereas the formation energies of vacancies are higher. In both NiCoCr and NiCoFeCr, Co-related dumbbell interstitials exhibit lower formation energies. Notably, the distributions of migration energies for Cr interstitials and vacancies exhibit a remarkable overlap region. A detailed analysis of electronic properties reveals that the electronic charge deformation flexibility regarding e g to t 2g transition has a dominant effect on defect energetics for different elements in CSAs. Thus the electron deformation ability is suggested as a key factor in understanding the peculiar defect behavior in CSAs.

36 MATERIALS SCIENCE↗

Microscopic infrared analysis by X-ray or electron radiation

An infrared (IR) emission spectroscopy and microscopy apparatus with X-ray excitation or electron excitation and an improved process for extending spatial relation of infrared (IR) microscopy and performing microscopic infrared (IR) analysis by X-ray or electron radiation are provided. By utilizing nanometer sized X-ray beams or electron beams to produce IR emission, the spatial resolution of IR microscopy is extended. Simultaneously performing X-ray or electron-based spectroscopy as well as structural studies are enabled.

42 ENGINEERING↗

Influence of electron beam irradiation on mechanical and thermal properties of polypropylene/polyamide blend

The effects of electron beam irradiation on the mechanical and thermal properties of polypropylene (PP) and polyamide6 (PA6) blends-with talc 20 wt% as filler, SEBS-g-MAH as compatibilizer, and triallyl isocyanurate as crosslinking agent-were investigated. Although the tensile and flexural moduli and strengths of the PP/PA6 blends with talc, SEBS-g-MAH, and TAIC could be increased by the application of electron beam irradiation, the impact strength was decreased. Ddifferential scanning calorimetryer measurements showed that the melting temperatures of all PP/PA6 blends were decreased with increases in the electron beam irradiationdose. From dynamic mechanical analyzer results, a storage modulus curve in the plateau region was observed only in the PP/PA6 blends with talc, SEBS-g-MAH, and TAIC; the storage modulus increased with increasing electron beam irradiation dose, indicating that the three-dimensional network developed gradually in the more amorphous PA6. As a result, the most significant improvement observed in heat distortion tests under high load (1.8 MPa) occurred at 200 kGy.

36 MATERIALS SCIENCE↗

A fluorescence XAFS measurement instrument in the soft x-ray region toward observation under operando conditions

X-ray absorption fine structure (XAFS) measurements are widely used for the analysis of electronic structure. Generally, XAFS in the soft X-ray region is measured under vacuum, but chemical structures under vacuum are typically different from those under operando conditions, where chemical species exhibit their function. Here, we developed an XAFS measurement instrument, as a step toward operando fluorescent, which yields XAFS measurement using synchrotron radiation in the soft X-ray region. We applied this method to analyze the local electronic structure of the sulfur atoms in L-cysteine in different pH solutions. In water at pH 7, the hydrogen atom does not dissociate from the thiol (-SH) group in L-cysteine, which forms a structure surrounded by and interacting with water molecules. The XAFS spectrum of L-cysteine in solution was altered by changing the pH. At pH 9, the hydrogen atom dissociated and a thiolate anion was formed. Although the -SH group was oxidized to SO{sub 4}{sup 2−} when L-cysteine was adsorbed on a metal surface and dried, no oxidation was observed in solution. This may be because the water molecules were densely packed and protected the -SH group from oxidation. Our results show that this instrument aimed toward operando fluorescence XAFS measurements in the soft X-ray region is useful for structural analysis of sulfur atoms in organic molecules in air and in solution. The instrument will be applied to the structural analysis of materials containing elements that have absorption edges in soft X-ray region, such as phosphorus and alkali metals (potassium and cesium). It will be also particularly useful for the analysis of samples that are difficult to handle under vacuum and materials that have specific functions in solution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dry-growth of silver single-crystal nanowires from porous Ag structure

A fabrication method of single crystal Ag nanowires in large scale is introduced without any chemical synthesis in wet processes, which usually generates fivefold twinned nanowires of fcc metals. Dense single-crystal nanowires grow on a mechanically polished surface of micro-porous Ag structure, which is created from Ag micro-particles. The diameter and the length of the nanowires can be controlled simply by changing the temperature and the time of the heating during the nanowire growth in air. Unique growth mechanism is described in detail, based on stress-induced migration accelerated by the micro-porous structure where the origin of Ag nanowires growth is incubated. Transmission electron microscopy analysis on the single crystal nanowires is also presented. This simple method offered an alternative preparation for metallic nanowires, especially with the single crystal structure in numerous applications.

36 MATERIALS SCIENCE↗

Synthesis and structural analysis of Bi{sub 2-y}Sr{sub y}Ir{sub 2}O{sub 7}, a new pyrochlore solid solution

This paper presents a study of the synthesis and structural properties of the new pyrochlore-type Bi{sub 2-y}Sr{sub y}Ir{sub 2}O{sub 7} series. Ten compositions with 0.0{<=}y{<=}0.9 were prepared by solid-state reaction with thermal treatments at 873, 1073 and 1323 K under atmospheric pressure conditions. Structural refinements from X-ray powder diffraction data by the Rietveld method show that all compounds of the Bi{sub 2-y}Sr{sub y}Ir{sub 2}O{sub 7} solid solution crystallize in a {alpha}-pyrochlore structure. The main structural difference when bismuth is substituted by strontium concerns the x position of the O1 (x, (1/8), (1/8)). This substitution significantly increases the Bi/Sr-O1 distance and diminishes the Ir-O1 distance; this implies that the Ir-O1-Ir bond angle increases. With the Sr substitution, the IrO{sub 6} local configuration goes from a flattened trigonal antiprism, y<0.5, to an elongated one, y>0.5, passing through an octahedral array, y{approx}0.5. The electrical consequences of these structural changes observed in this system are qualitatively explained with electronic structure calculations, this behavior agrees very well with those observed in other pyrochlore systems A{sub 2}M{sub 2}O{sub 7} (A=rare earth cations or Tl{sup +}, Pb{sup 2+}, or Bi{sup 3+}, and M=Ru or Ir). -- Graphical abstract: Electrical behavior of the Bi{sub 2-y}Sr{sub y}Ir{sub 2}O{sub 7} solid solution. Display Omitted Highlights: {yields} Bi{sub 2-y}Sr{sub y}Ir{sub 2}O{sub 7} crystallizes in the {alpha}-pyrochlore structure. {yields} Local geometry of Ir goes from a flattened trigonal antiprism to an elongated one. {yields} Electrical resistivity increases with the Sr content in the solid solution. {yields} Electronic structure analysis relates resistivity with Sr disorder and bond strength.

36 MATERIALS SCIENCE↗

Novel Solid Electrolytes for Li-Ion Batteries: A Perspective from Electron Microscopy Studies

Solid electrolytes can simultaneously overcome two of the most formidable challenges of Li-ion batteries: the severe safety issues and insufficient energy densities. However, before they can be implemented in actual batteries, the ionic conductivity needs to be improved and the interface with electrodes must be optimized. The prerequisite for addressing these issues is a thorough understanding of the material’s behavior at the microscopic and/or the atomic level. (Scanning) transmission electron microscopy is a powerful tool for this purpose, as it can reach an ultrahigh spatial resolution. Here, we review recent electron microscopy investigations on the ion transport behavior in solid electrolytes and their interfaces. Specifically, three aspects will be highlighted: the influence of grain interior atomic configuration on ionic conductivity, the contribution of grain boundaries, and the behavior of solid electrolyte/electrode interfaces. In conclusion, based on this, the perspectives for future research will be discussed.

25 ENERGY STORAGE↗

Analog Readout and Analysis Software for the Ultra-High Rate Germanium (UHRGe) Project

High-resolution high-purity germanium (HPGe) spectrometers are needed for Safeguards applications such as spent fuel assay and uranium hexafluoride cylinder verification. In addition, these spectrometers would be applicable to other high-rate applications such as non-destructive assay of nuclear materials using nuclear resonance fluorescence. Count-rate limitations of today's HPGe technologies, however, lead to concessions in their use and reduction in their efficacy. Large-volume, very high-rate HPGe spectrometers are needed to enable a new generation of nondestructive assay systems. The Ultra-High Rate Germanium (UHRGe) project is developing HPGe spectrometer systems capable of operating at unprecedented rates, 10 to 100 times those available today. This report documents current status of developments in the analog electronics and analysis software.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗