Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “dynamic boundary”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Diffusion-driven Fluid Dynamics in Ideal Gases and Plasmas

The classical transport theory based on Chapman-Enskog methods provides self-consistent approximations for the kinetic flux of mass, heat, and momentum in a fluid limit characterized with a small Knudsen number. The species mass fluxes relative to the center of mass, or “diffusive fluxes,” are expressed as functions of known gradient quantities with kinetic coefficients evaluated using similar analyses for mixtures of gases or plasma components. The sum over species of the diffusive mass fluxes is constrained to be zero in the Lagrange frame, and thus results in a non-zero molar flux leading to a pressure perturbation. At an interface between two species initially in pressure equilibrium, the pressure perturbation driven by the diffusive molar flux induces a center of mass velocity directed from the species of greater atomic mass towards the lighter atomic mass species. As the ratio of the species particle masses increases, this center of mass velocity carries an increasingly greater portion of the mass across the interface and for a particle mass ratio greater than about two, the center of mass velocity carries more mass than the gradient driven diffusion flux. Early time transients across an interface between two species in a 1D plasma regime and initially in equilibrium are compared using three methods; a fluid code with closure in a classical transport approximation, a particle in cell simulation, and an implicit Fokker-Planck solver for the particle distribution functions. The early time transient phenomenology is shown to be similar in each of the computational simulation methods, including a pressure perturbation associated with the stationary “induced” component of the center of mass velocity which decays to pressure equilibrium during diffusion. At early times, the diffusive process generates pressure and velocity waves which propagate outward from the interface and are required to maintain momentum conservation. The energy in the outgoing waves dissipates as heat in viscous regions, and it is hypothesized that these diffusion driven waves may sustain fluctuations in less viscid finite domains after reflections from the boundaries. Finally, these fluid dynamic phenomena are similar in gases or plasmas and occur in flow transients with a moderate Knudsen number. The analysis and simulation results show how the kinetic flux, represented in the fluid transport closure, directly modifies the mass averaged flow described with the Euler equations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

On the Departure from Monin–Obukhov Surface Similarity and Transition to the Convective Mixed Layer

Large-eddy simulations are used to evaluate mean profile similarity in the convective boundary layer (CBL). Particular care is taken regarding the grid sensitivity of the profiles and the mitigation of inertial oscillations in the simulation spin-up. The nondimensional gradients Φ for wind speed and air temperature generally align with Monin–Obukhov similarity across cases but have a steeper slope than predicted within each profile. The same trend has been noted in several other recent studies. The Businger-Dyer relations are modified here with an exponential cutoff term to account for the decay in Φ to first-order approximation, yielding improved similarity from approximately 0.05z i to above 0.3z i , where z i is the CBL depth. The necessity for the exponential correction is attributed to an extended transition from surface scaling to zero gradient in the mixed layer, where the departure from Monin–Obukhov similarity may be negligible at the surface but becomes substantial well below the conventional surface layer height of 0.1 z i .

54 ENVIRONMENTAL SCIENCES↗

An atomistic survey of shear coupling in asymmetric tilt grain boundaries and interpretation using the disconnections framework

Grain Boundaries (GB) play an important role in determining the behavior of polycrystalline materials. While the mechanisms of motion and associated shear response for symmetric tilt grain boundaries (STGBs) are well studied, the same is not true for asymmetric tilt grain boundaries (ATGBs) despite their greater prevalence in polycrystals. Here, this study aims to investigate the shear response of a large collection of asymmetric tilt grain boundaries (ATGBs) using molecular dynamics (MD) simulations and interpret the data using a discrete disconnections model that works remarkably well for STGBs. MD simulations of shear-driven ATGBs show that the plastic shear (shear coupling factor) in the region swept by a GB exhibits a complex dependence on the inclination angle, and this dependence changes with the misorientation of the GB. In addition, the shear response was observed to be highly sensitive to the applied shear rate and temperature. Recognizing the spatial and temporal scale limitations of MD simulations, we extended the discrete disconnections mesoscale model of Khateret al. (2012) to calculate the nucleation barriers of disconnection modes and predict the effective shear coupling of an ATGB. We observed that the mesoscale model’s predictions of the shear coupling factor of ATGBs do not agree with those observed in MD simulations. Finally, we examine the hypotheses of our mesoscale model that contribute to disagreements between MD simulations and the mesoscale model and propose improvements to the mesoscale model for future work.

36 MATERIALS SCIENCE↗

Modelin the Transport and Chemical Evolution of Onshore and Offshore Emissions and Their Impact on Local and Regional Air Quality Using a Variable-Grid-Resolution Air Quality Model

The overall objective of this research project was to develop an innovative modeling technique to adequately model the offshore/onshore transport of pollutants. The variable-grid modeling approach that was developed alleviates many of the shortcomings of the traditionally used nested regular-grid modeling approach, in particular related to biases near boundaries and the excessive computational requirements when using nested grids. The Gulf of Mexico region contiguous to the Houston-Galveston area and southern Louisiana was chosen as a test bed for the variable-grid modeling approach. In addition to the onshore high pollution emissions from various sources in those areas, emissions from on-shore and off-shore oil and gas exploration and production are additional sources of air pollution. We identified case studies for which to perform meteorological and air quality model simulations. Our approach included developing and evaluating the meteorological, emissions, and chemistry-transport modeling components for the variable-grid applications, with special focus on the geographic areas where the finest grid resolution was used. We evaluated the performance of two atmospheric boundary layer (ABL) schemes, and identified the best-performing scheme for simulating mesoscale circulations for different grid resolutions. Use of a newly developed surface data assimilation scheme resulted in improved meteorological model simulations. We also successfully ingested satellite-derived sea surface temperatures (SSTs) into the meteorological model simulations, leading to further improvements in simulated wind, temperature, and moisture fields. These improved meteorological fields were important for variable-grid simulations, especially related to capturing the land-sea breeze circulations that are critical for modeling offshore/onshore transport of pollutants in the Gulf region. We developed SMOKE-VGR, the variable-grid version of the SMOKE emissions processing model, and tested and evaluated this new system. We completed the development of our variable-grid-resolution air quality model (MAQSIP-VGR) and performed various diagnostic tests related to an enhanced cloud parameterization scheme. We also developed an important tool for variable-grid graphics using Google Earth. We ran the MAQSIP-VGR for the Houston-Galveston and southern Louisiana domains for an August 23 to September 2, 2002, episode. Results of the modeling simulations highlighted the usefulness of the variable-grid modeling approach when simulating complex terrain processes related to land and sea close to an urban area. Our results showed that realistic SST patterns based on remote sensing are critical to capturing the land-sea breeze, in particular the inland intrusion of the reversed mesoscale circulation that is critical for simulating air pollution over urban areas near coastal regions. Besides capturing the correct horizontal gradient between land and sea surface temperatures, it is important to use an adequate ABL scheme in order to quantify correctly the vertical profiles of various parameters. The ABL scheme should capture the dynamics of the marine boundary layer, which is not often considered in a typical simulation over land. Our results further showed the effect of using satellite-derived SSTs on the horizontal and vertical extent of the modeled pollution pattern, and the increase in hourly ozone concentrations associated with changes in ABL characteristics resulting from the enhanced mesoscale circulation in the lower troposphere.

54 ENVIRONMENTAL SCIENCES↗

Transition Analysis for the Pazy Wing

The Pazy wing, designed as a benchmark for highly flexible wings that experience large deformations, presents intriguing nonlinear phenomena due to its unique geometry with spanwise varying static deformation and low Reynolds number flow conditions. These phenomena include limit cycle oscillation related to laminar separation bubbles, boundary-layer transition, and dynamic stall. The primary focus of this study is to investigate transition behavior on the sagged Pazy wing under static loading by using the shear-stress-transport (SST)-based Langtry-Menter 𝜸 − 𝑹𝒆𝜽𝒕 transition model in the NASA OVERFLOW and FUN3D solvers. Based on the steady-state results obtained via different variants of the Langtry-Menter model, we investigate the likely transition behavior over a range of incidence angles. The predicted flowfield on the sagged Pazy wing is strongly three dimensional and the application of turbulence index as a viable indicator of the transition front in such flows is also explored. The study demonstrates the limitations of the Langtry-Menter model when applied to low Reynolds number flows. We introduce a spanwise periodic configuration to simulate a narrow-span section of the Pazy wing, specifically centered on one of the 14 nearly equidistant ribs spanning the wing. The computational results demonstrate that the spanwise periodic configuration provides a straightforward environment for studying transition characteristics as well as demonstrating systematic grid convergence and successful code-to-code comparisons. The research offers useful insights into the transition characteristics of flexible wings under various loading conditions, contributing to the field of aeroelastic simulations.

CFD Modeling↗

Transition Analysis for the Pazy Wing

The Pazy wing, designed as a benchmark for highly flexible wings that experience large deformations, presents intriguing nonlinear phenomena due to its unique geometry with spanwise varying static deformation and low Reynolds number flow conditions. These phenomena include limit cycle oscillation related to laminar separation bubbles, boundary-layer transition, and dynamic stall. The primary focus of this study is to investigate transition behavior on the sagged Pazy wing under static loading by using the shear-stress-transport (SST)-based Langtry-Menter 𝜸 − 𝑹𝒆𝜽𝒕 transition model in the NASA OVERFLOW and FUN3D solvers. Based on the steady-state results obtained via different variants of the Langtry-Menter model, we investigate the likely transition behavior over a range of incidence angles. The predicted flowfield on the sagged Pazy wing is strongly three dimensional and the application of turbulence index as a viable indicator of the transition front in such flows is also explored. The study demonstrates the limitations of the Langtry-Menter model when applied to low Reynolds number flows. We introduce a spanwise periodic configuration to simulate a narrow-span section of the Pazy wing, specifically centered on one of the 14 nearly equidistant ribs spanning the wing. The computational results demonstrate that the spanwise periodic configuration provides a straightforward environment for studying transition characteristics as well as demonstrating systematic grid convergence and successful code-to-code comparisons. The research offers useful insights into the transition characteristics of flexible wings under various loading conditions, contributing to the field of aeroelastic simulations.

CFD Modeling↗

Molecular dynamics simulations of fission gas xenon (Xe) diffusion at UO 2 grain-boundaries (Rev.1)

The diffusivity of fission gas xenon (Xe) at UO 2 grain-boundaries is one of the most important parameters in mechanistic modeling of fission gas diffusion in UO 2 based nuclear fuels. In this report, we use molecular dynamics simulations to investigate the Xe diffusivity in UO 2 grain-boundaries, employing the many-body potential developed by Cooper, Rushton and Grimes for UO 2 . Three different types of grain-boundaries are investigated, twist Σ5, tilt Σ5, and a random grain-boundary. Diffusion activation energies in the range of 0.39 – 1.46 eV are obtained for the Xe diffusivity. Comparison to results for the uranium vacancy diffusivity from MD simulations employing the same methodology suggests a weak to moderate attractive Xe-uranium vacancy binding energy depending on the grain-boundary type.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Nanoscale Decoupling of Carrier-Phonon Transport in Carbon Nanotube-Halide Perovskite Heterostructures

In conventional semiconductors, electrical and thermal conductivity are typically coupled, posing a challenge in optimizing both simultaneously. Overcoming this inherent trade-off enables strategies for advancing electronic applications. Herein, a strategy is demonstrated to decouple electrical and thermal conductivity trade-off by creating heterostructures of highly conductive single-walled carbon nanotubes (SWCNTs) coated with low conductivity hybrid perovskites. Coating SWCNTs with methylammonium lead iodide perovskite results in an enhancement in electrical conductivity (408-1266 S cm-1) due to p-type doping followed by a threefold decrease of the in-plane thermal conductivity (3.3-1 W m-1 K-1), compared to pristine SWCNTs. Molecular dynamics simulations uncover phonon boundary scattering at the SWCNT/perovskite interface as well as localization of methylammonium-related and softening of the Pb-I-related phonon modes in methylammonium lead iodide perovskite decreasing the thermal conductivity.

14 SOLAR ENERGY↗

A simple method for simulating wind profiles in the boundary layer of tropical cyclones

A method to simulate characteristics of wind speed in the boundary layer of tropical cyclones in an idealized manner is developed and evaluated. The method can be used in a single-column modelling set-up with a planetary boundary-layer parametrization, or within large-eddy simulations (LES). The key step is to include terms in the horizontal velocity equations representing advection and centrifugal acceleration in tropical cyclones that occurs on scales larger than the domain size. Compared to other recently developed methods, which require two input parameters (a reference wind speed, and radius from the centre of a tropical cyclone) this new method also requires a third input parameter: the radial gradient of reference wind speed. With the new method, simulated wind profiles are similar to composite profiles from dropsonde observations; in contrast, a classic Ekman-type method tends to overpredict inflow-layer depth and magnitude, and two recently developed methods for tropical cyclone environments tend to overpredict near-surface wind speed. When used in LES, the new technique produces vertical profiles of total turbulent stress and estimated eddy viscosity that are similar to values determined from low-level aircraft flights in tropical cyclones. Lastly, temporal spectra from LES produce an inertial subrange for frequencies ≳0.1 Hz, but only when the horizontal grid spacing ≲20 m.

17 WIND ENERGY↗

AFM Special Issue Summary - Integrating Surface Flux with Boundary Layer Measurements

To help bridge science topics related to land-atmosphere interactions, we organized a virtual special issue in this journal (Agricultural and Forest Meteorology [AFM]) entitled, “Land-Atmosphere Interactions: Integrating Surface Flux with Boundary Layer Measurements.” The motivation for the special issue was driven by existing disciplinary barriers between research areas that all address land-atmosphere interactions. In particular, it addressed research silos between those who study features of the land surface, surface fluxes (including water, energy, and trace gases), atmospheric boundary layer growth and thermodynamics, and atmospheric composition and aerosols. The special issue sought to bring these communities together to integrate multiple observations across the soil-vegetation-atmosphere continuum with the aim of 1) improving broader understanding of land-atmosphere interactions, feedbacks, and coupling, 2) fostering new collaborations between atmospheric and surface flux scientists, and 3) identifying new paths for integrative research. In this report we provide an overview and synthesis of the special issue.

58 GEOSCIENCES↗

Peridynamic elastic waves in two-dimensional unbounded domains: Construction of nonlocal Dirichlet-type absorbing boundary conditions

The focus of this paper is on application of peridynamics (PD) to propagation of elastic waves in unbounded domains. We construct absorbing boundary conditions (ABCs) derived from a semi-analytical solution of the PD governing equation at the exterior region. This solution is made up of a finite series of plane waves, as fundamental solutions (modes), which satisfy the PD dispersion relations. The modes are adjusted to transmit the energy from the interior region (near field) to the exterior region (far field). The corresponding unknown coefficients of the series are found in terms of the displacement field at a layer of points adjacent to the absorbing boundary. This is accomplished through a collocation procedure at subregions (clouds) around each absorbing point. The proposed ABCs offer appealing advantages, which facilitate their application to PD. They are of Dirichlet-type, hence their implementation is relatively simple as no derivatives of the field variables are required. They are constructed in the time and space domains and thus application of Fourier and Laplace transforms, cumbersome for nonlocal models, is not required. At the discrete level, the modes satisfy the same numerical dispersion relations of the near field, which makes the far-field solution compatible with that of the near field. We scrutinize the performance of the proposed ABCs through several examples. So our investigation shows that the proposed ABCs perform stably in time with an appropriate level of accuracy even in problems characterized by highly-dispersive propagating waves, including crack propagation in semi-unbounded brittle solids.

42 ENGINEERING↗

The effect of CO 2 -induced dissolution on flow properties in Indiana Limestone: An in situ synchrotron X-ray micro-tomography study

The injection of CO 2 -rich fluids in carbonate rocks results in an evolution of the pore space, with consequent changes in the hydraulic properties of the reservoir; how these properties evolve, particularly for parameters relevant to multiphase flow e.g. P c (s), remains a topic of active research despite several decades of study. We have carried out an in situ synchrotron X-ray microtomography experiment to monitor pore structure evolution during dissolution of an Indiana Limestone core; the experiment involved flowing CO 2 -saturated water through the core for 36 h and resulted in 10 volumes corresponding to different temporal stages of the dissolution process. The injection parameters corresponded to the flow velocities expected near the well-bore region of a shallow aqueous CO 2 injection; fast flow rates with high reactant availability. Analysis of the tomographic data shows flow-enhanced dissolution i.e. channeling, and provides a time-resolved map of pore space alteration. Using the resulting 4D pore space volume, we modeled the evolution of capillary-pressure curves; this exercise demonstrates how pore structure evolution could impact the invasion and remobilization of non-wetting fluids, dramatically decreasing the entry pressure and the P C in some parts of the sample. The modeling of permeability, using a Stokes solver approach, quantified the relationship of porosity vs. permeability; we found that a modest increase in porosity, especially when the channeling system is more developed, greatly affects permeability. Furthermore, these results demonstrate how movement of CO 2 saturated brine near injected plumes might alter drainage dynamics near the plume boundary, thus leading to mobilization across subtle capillary barriers.

58 GEOSCIENCES↗

Effects of grain boundary disorder on dislocation emission

It was recently reported that segregation of Zr to grain boundaries (GB) in nanocrystalline Cu can lead to the development of disorder in the intergranular structure (Khalajhedayati et al., 2016; Khalajhedayati and Rupert, 2015). In this study we employ atomistic computer simulations to investigate how this disorder affects dislocation nucleation from the GBs under applied stress. It was found that a fully disordered grain boundary structure suppresses dislocation emission and significantly increases the yield stress. Depending on the solute concentration and heat-treatment, however, partial disorder may also occur and this aids dislocation nucleation rather than suppressing it, reducing or eliminating the strengthening effect.

36 MATERIALS SCIENCE↗

Void growth via dislocation pileup impingement on grain boundary

In this work, the effect of edge dislocations, impinging on grain boundary in fcc Fe near a preexisting void on the volume of this void, was studied using MD simulation. It was found that virtually unlimited growth of the void via this mechanism is possible under certain conditions. To the best of our knowledge this is the first atomistic simulation study, demonstrating feasibility of this void growth mechanism.

36 MATERIALS SCIENCE↗

Formability of a wrought Mg alloy evaluated by impression testing

This study is focused on furthering our understanding of the different factors that influence the formability of Magnesium alloys. Towards this end, formability studies were undertaken on a wrought Mg-2Zn-1Mn (ZM21) alloy. In contrast to conventional formability studies, the impression testing method was adopted here to evaluate the formability parameter, B, at temperatures ranging from 298 to 473 K. The variation of B of ZM21 with temperature and its rather limited values were discussed in the light of different deformation mechanisms such as activation of twinning, slip, grain boundary sliding (GBS) and dynamic recrystallization (DRX). It was found that the material characteristics such as grain size, texture and testing conditions such as temperature and strain rate, were key determinants of the mechanism of plastic deformation. A by-product of this analysis was the observation of an interesting correlation between the Zener-Hollomon parameter, Z, and the ability of Mg alloys to undergo DRX.

Formability↗

Texture and precipitation behavior of friction stir welded Inconel 825 alloy

The microstructure, texture pattern, and precipitation behavior of friction stir butt welded Inconel 825 alloy are highlighted here. The microstructure of bright regions and black-banded regions in the stir zone (SZ) is characterized by SEM, EBSD, and TEM with EDS. EBSD analysis justifies that the SZ exhibits a dynamic recrystallized structure. Grain boundary mapping corroborates the insignificant difference in the low- and high-angle grain boundaries fraction between the SZ, the thermo-mechanically affected zone, and the base metal. TEM analysis confirms the formation of nano twins and dispersion of nano-size precipitations in the grains, and at the grain boundaries as well. Grain refinement and nano-size precipitation formation in the SZ significantly enhanced both microhardness and tensile strength.

Das, Hrishikesh↗