Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “dimensional changes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Plastic and low-cost axial zero thermal expansion alloy by a natural dual-phase composite

Zero thermal expansion (ZTE) alloys possess unique dimensional stability, high thermal and electrical conductivities. Their practical application under heat and stress is however limited by their inherent brittleness because ZTE and plasticity are generally exclusive in a single-phase material. Besides, the performance of ZTE alloys is highly sensitive to change of compositions, so conventional synthesis methods such as alloying or the design of multiphase to improve its thermal and mechanical properties are usually inapplicable. In this study, by adopting a one-step eutectic reaction method, we overcome this challenge. A natural dual-phase composite with ZTE and plasticity was synthesized by melting 4 atom% holmium with pure iron. The dual-phase alloy shows moderate plasticity and strength, axial zero thermal expansion, and stable thermal cycling performance as well as low cost. By using synchrotron X-ray diffraction, in-situ neutron diffraction and microscopy, the critical mechanism of dual-phase synergy on both thermal expansion regulation and mechanical property enhancement is revealed. These results demonstrate that eutectic reaction is likely to be a universal and effective method for the design of high-performance intermetallic-compound-based ZTE alloys.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Enhanced polarization and abnormal flexural deformation in bent freestanding perovskite oxides

Abstract Recent realizations of ultrathin freestanding perovskite oxides offer a unique platform to probe novel properties in two-dimensional oxides. Here, we observe a giant flexoelectric response in freestanding BiFeO 3 and SrTiO 3 in their bent state arising from strain gradients up to 3.5 × 10 7 m −1 , suggesting a promising approach for realizing ultra-large polarizations. Additionally, a substantial change in membrane thickness is discovered in bent freestanding BiFeO 3 , which implies an unusual bending-expansion/shrinkage effect in the ferroelectric membrane that has never been seen before in crystalline materials. Our theoretical model reveals that this unprecedented flexural deformation within the membrane is attributable to a flexoelectricity–piezoelectricity interplay. The finding unveils intriguing nanoscale electromechanical properties and provides guidance for their practical applications in flexible nanoelectromechanical systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

The Dirac equation as a model of topological insulators

The Dirac equation with a spatially dependent mass can be used as a simple, exactly soluble, continuum model of a three-dimensional Topological Insulator. For a bulk system, the sign of the mass determines the parity at the only time-reversal point ( k _ = 0 ) and, thus, leads to the designation of the bulk as being topologically trivial or non-trivial. Since the mass changes sign at the interface between a topologically trivial and non-trivial materials, topological surface states appear on that boundary. We present that electron scattering experiments may provide an alternate probe of the topological character of the surface states. For infinitely thick slabs, the states on the opposite sides of the slab decouple. The spatial decoupling results in the surface states become gapless, non-degenerate and, due to the Rashba spin–orbit coupling generated by the loss of inversion symmetry, exhibit spin-momentum locking. We review several characteristic properties of the topological surface states which are dependent on the topological quantum numbers and show that, using this model, they can be calculated exactly using simple approaches.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Hierarchy among the crystal lattice, charge density wave, and superconducting orders in transition metal dichalcogenides

Using high-energy x-ray scattering and large-scale three-dimensional (3D) structure modeling, in this study we investigate the relationship between the crystal lattice, charge density wave (CDW), and superconducting (SC) orders in transition metal dichalcogenides (TMDs). In particular, we systematically substitute Te for Se in Ta-Se-Te solid solutions, determine changes in their crystal lattice, and relate them to changes in the CDW transition temperature, $T_{CDW}$, and SC critical temperature, $T_c$ . We find that strong lattice distortions such as buckling of Ta layers are detrimental to the CDW and SC orders. The presence of a perfect lattice order in two dimensions is a prerequisite to the emergence of CDWs but insufficient to achieve a SC ordered state. For the SC order to emerge, the Ta sublattice should also appear periodic in 3D. Local chemical disorder may promote the SC order, and the perfectness of Ta coordination polyhedra is a factor contributing to its strength. A hierarchical relationship among the crystal lattice, CDW, and SC orders thus appears to exist in TMDs in a sense that different degrees of crystal lattice order-disorder promote and maintain the CDW and SC orders to a different extent, offering an opportunity to control the latter through modifying the former by rational design. Our findings are a step towards a better understanding of the correlation between lattice and electronic degrees of freedom in TMDs. We also demonstrate an efficient experimental approach to study them in fine detail.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Virtual and Augmented Realities to Support Development, Training, Deployment, and Operations of Remote Systems - 20516

Throughout the U.S. Department of Energy complex, there is a need to deploy new, unique equipment and systems for cleanup activities, waste processing, infrastructure repair, and decommissioning and demolition in radioactive and hazardous environments. The new equipment often consists of custom systems created by integrating and modifying commercial technologies. In addition, the systems are deployed in unique environments due to limited access, waste properties, and the presence of previously installed equipment or infrastructure that has been left in place. The deployment of custom systems that are 'turnkey' ready for first-time installation and application has its risks. Use of test platforms and mockups for cold (i.e., non-radioactive) testing is one method to mitigate that risk: however, full-scale test mockups for operations such as waste retrieval and tank inspection can be expensive and must be modified to incorporate the uniqueness of each application. An alternative to full-scale mockups is to use three-dimensional (3D) virtual environments and virtual reality (VR) technology to develop interactive virtual test beds. These can be used throughout the down-selection, development, system integration, operational planning, operator training, and mission execution phases of a task. Virtual test beds are readily reconfigured, can be used for multiple tasks, support multiple users in parallel, and can accommodate enhancements and changes not originally planned or conceived in the initial design. Virtual test beds also provide a platform for developing and testing augmented reality (AR) tools for improving operator efficiency. A VR experience has been generated for waste retrieval from a Hanford waste tank to present the potential applications of a virtual test bed. Features of the VR experience are presented, potential applications of VR and AR for remote applications are discussed, and development areas for improving future application are considered. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2023

Machinability comparison of additively manufactured and traditionally wrought Ti-6Al-4V alloys using single-point cutting

Post-machining is often needed to provide high dimensional accuracy and fine surface finish for additively manufactured Ti-6Al-4V (Ti64). The material inhomogeneity, such as pores and microstructures, can affect the machining behavior of this already difficult-machine alloy. This study adopts a holistic approach to compare the machinability of additively manufactured and traditionally wrought Ti64 in terms of key machining factors, including forces, temperature, and vibration and the major machining outcomes including tool life, surface finish, and dimensional accuracy. Stress-relief annealing is applied to each of the part conditions as a secondary variable to observe the additional effects. The results show that AM is not particularly more difficult to machine in terms of cutting force and temperature, but it creates high cutting vibrations across a wide range of frequencies (to and over 5 kHz). The high vibrations do not lead to worse surface finish or dimensional accuracy but tend to worsen the tool life by chipping off the cutting edge. The vibration can be attributed to the brittle martensitic microstructure found in additively manufactured Ti64, which is also evidenced by the more serrated chips. Stress-relieving is found to change the microstructure and reduce the level of vibration to that of the wrought counterpart.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Chiral-Bubble-Induced Topological Hall Effect in Ferromagnetic Topological Insulator Heterostructures

In this letter, we report compelling evidence of emergent topological Hall effect (THE) from chiral bubbles in a two-dimensional uniaxial ferromagnet, V-doped Sb 2 Te 3 heterostructure. The sign of THE signal is determined by the net curvature of domain walls in different domain configuration, and the strength of THE signal is correlated with the density of nucleation or pinned bubble domains. The experimental results are in good agreement with the integrated linear transport and Monte Carlo simulations, corroborating the emergent gauge field at chiral magnetic bubbles. Lastly, our findings not only reveal a general mechanism of THE in two-dimensional ferromagnets, but also pave the way for the creation and manipulation of topological spin textures for spintronic applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

On the Derivation of Quasi-Newton Formulas for Optimization in Function Spaces

Newton’s method is usually preferred when solving optimization problems due to its superior convergence properties compared to gradient-based or derivative-free optimization algorithms. However, deriving and computing second-order derivatives needed by Newton’s method often is not trivial and, in some cases, not possible. In such cases quasi-Newton algorithms are a great alternative. In this paper, we provide a new derivation of well-known quasi-Newton formulas in an infinite-dimensional Hilbert space setting. Furthermore, it is known that quasi-Newton update formulas are solutions to certain variational problems over the space of symmetric matrices. In this paper, we formulate similar variational problems over the space of bounded symmetric operators in Hilbert spaces. By changing the constraints of the variational problem we obtain updates (for the Hessian and Hessian inverse) not only for the Broyden-Fletcher-Goldfarb-Shanno (BFGS) quasi-Newton method but also for Davidon–Fletcher–Powell (DFP), Symmetric Rank One (SR1), and Powell-Symmetric-Broyden (PSB). In addition, for an inverse problem governed by a partial differential equation (PDE), we derive DFP and BFGS “structured” secant formulas that explicitly use the derivative of the regularization and only approximates the second derivative of the misfit term. We show numerical results that demonstrate the desired mesh-independence property and superior performance of the resulting quasi-Newton methods.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Harmonic Signals Dataset

The Harmonic Signals Dataset (HSD) consists of one-dimensional time series data collected from current sensors with a goal of providing data for research and development of Non-Intrusive Load Monitoring (NILM) with high sample rate (800kHz) sensors. NILM seeks to detect and characterize electrical equipment operating within a facility by sensing changes in electrical current on the building power system associated with the equipment. To provide data with a known ground truth, but with the realism of a signal introduced within a building facility, a series of known ground truth signals were injected as voltage into the power system of a building and measurements of the signals at multiple locations across the building power system were made with electrical current sensors.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2020

Tailoring Charge Transport and Magnetism in Complex Half-Heusler/Full-Heusler Nanocomposites (Final Report)

This project exploits (1) the facile co-crystallization of the half-Heusler (HH) and full-Heusler (FH) structures, (2) the high coherency and stability of the HH/FH interfaces, and (3) the solid-state inter-conversion between HH and FH structures through local atomic diffusion, to investigate, for selected compositions of the HH and FH phases, the effect of size, dimensionality, dispersion and volume fraction of FH nanostructures on the electronic, phonon and magnetic behavior of the resulting HH/FH nanocomposites. Our goal is to identify and control key material and growth parameters governing phase formation, microstructural evolution, and to understand the mechanism by which these changes of the internal structure modify the material’s performance. To elucidate the mechanism by which the FH nanostructures regulate electronic charge transport and induce ferromagnetism within non-magnetic and magnetic semiconducting HH matrices, suitable series of HH/0D-FH and HH/2D-FH nanocomposites will be fabricated using synthesis conditions suggested by theoretical calculations of the formation energy and stability of various FH phases (varying M) in HH matrices with known chemical composition. The structure of the HH/FH interfaces (size, chemical composition, volume fraction and dispersion) will be investigated along with the evaluation of the electronic (carrier density, mobility, thermopower, electrical conductivity, effective mass), thermal and magnetic (susceptibility, magnetization etc.) properties of the resulting HH/FH nanocomposites.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Effect of grafting density on the two-dimensional assembly of nanoparticles

Employing grazing-incidence small-angle X-ray scattering (GISAXS) and X-ray reflectivity (XRR), we demonstrate that films composed of polyethylene glycol (PEG)-grafted silver nanoparticles (AgNPs) and gold nanoparticles (AuNPs), as well as their binary mixtures, form highly stable hexagonal structures at the vapor–liquid interface. These nanoparticles exhibit remarkable stability under varying environmental conditions, including changes in pH, mixing concentration, and PEG chain length. Short-chain PEG grafting produces dense, well-ordered films, while longer chains produce more complex, less dense quasi-bilayer structures. AuNPs exhibit higher grafting densities than AgNPs, leading to more ordered in-plane arrangements. In binary mixtures, AuNPs dominate the population at the surface, while AgNPs integrate into the system, expanding the lattice without forming a distinct binary superstructure. In conclusion, these results offer valuable insights into the structural behavior of PEG-grafted nanoparticles and provide a foundation for optimizing binary nanoparticle assemblies for advanced nanotechnology applications.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Two-dimensional burn velocity and analysis of burn products of nitromethane at high pressure

We have studied the laser-initiated deflagration of nitromethane (CH 3 NO 2 ) under high static pressure in the diamond anvil cell. Time-resolved images of the deflagrations have been obtained using intensified CCDs (ICCD). In contrast with previous work, we rely on spontaneous emission from the reaction, rather than changes in the speckle pattern produced by artificial illumination of the sample. Furthermore, as opposed to the 1D records obtained previously with streak cameras, ICCDs permit imaging of the burn in two dimensions providing the ability to directly observe anisotropic deflagration behavior. Here, we report several examples of this behavior and discuss its possible origins. We have also investigated the products of the reaction using Raman spectroscopy. At pressures below 25 GPa, the burn product is observed to be opaque and has a Raman spectrum consistent with a carbonaceous soot. At pressures above 25 GPa, the burn product is observed to be transparent (consistent with earlier reports) and its Raman spectrum reveals the presence of molecular N 2 and a nitrogen-carbonate species. The latter species can be recovered to ambient pressure and has a Raman spectrum consistent with ammonium carbonate or ammonium bicarbonate. To aid interpretation of the Raman spectra, measurements have also been made on the isotopologues CH 3 15 NO 2 and 13 CH 3 NO 2 . This work establishes the importance of advanced time-resolved imaging to reveal the details of deflagration under high pressure and further advances our understanding of the corresponding chemistry.

Deflagration↗
DOE OSTI2022

Microgrid Resilience: A Holistic and Context-Aware Resilience Metric

Microgrids present an effective solution for the coordinated deployment of various distributed energy resources and furthermore provide myriad additional benefits such as resilience, decreased carbon footprint, and reliability to energy consumers and the energy system as a whole. Boosting the resilience of distribution systems is another major benefit of microgrids. This is because they can also serve as a backup power source when the utility grid's operations are interrupted due to either high-probability low-impact events like a component failure or low-probability high-impact events - be it a natural disaster or a planned cyberattack. However, the degree to which any particular system can defend, adapt, and restore normal operation depends on various factors including the type and severity of events to which a microgrid is subjected. These factors, in turn, are dependent on the geographical location of the deployed microgrid as well as the cyber risk profile of the site where the microgrid is operating. Therefore, in this work, we attempt to capture this multi-dimensional interplay of various factors in quantifying the ability of the microgrid to be resilient in these varying aspects. This paper, thus, proposes a customized site-specific quantification of the resilience strength for the individual microgrid's capability to absorb, restore, and adapt to the changing circumstances for sustaining the critical load when a low-probability high-impact event occurs - termed as - context-aware resilience metric. We also present a case study to illustrate the key elements of our integrated analytical approach.

microgrid↗
DOE OSTI2023

Controlled Self-Assembly of Gold Nanotetrahedra into Quasicrystals and Complex Periodic Supracrystals

The self-assembly of shape-anisotropic nanocrystals into large-scale structures is a versatile and scalable approach to creating multifunctional materials. The tetrahedral geometry is ubiquitous in natural and manmade materials, yet regular tetrahedra present a formidable challenge in understanding their self-assembly behavior as they do not tile space. Here, we report diverse supracrystals from gold nanotetrahedra including the quasicrystal (QC) and the dimer packing predicted more than a decade ago and hitherto unknown phases. We solve the complex three-dimensional (3D) structure of the QC by a combination of electron microscopy, tomography, and synchrotron X-ray scattering. Nanotetrahedron vertex sharpness, surface ligands, and assembly conditions work in concert to regulate supracrystal structure. We also discover that the surface curvature of supracrystals can induce structural changes of the QC tiling and eventually, for small supracrystals with high curvature, stabilize a hexagonal approximant. Finally, our findings bridge the gap between computational design and experimental realization of soft matter assemblies and demonstrate the importance of accurate control over nanocrystal attributes and the assembly conditions to realize increasingly complex nanopolyhedron supracrystals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

A localized view on molecular dissociation via electron-ion partial covariance

Inner-shell photoelectron spectroscopy provides an element-specific probe of molecular structure, as core-electron binding energies are sensitive to the chemical environment. Short-wavelength femtosecond light sources, such as Free-Electron Lasers (FELs), even enable time-resolved site-specific investigations of molecular photochemistry. Here, we study the ultraviolet photodissociation of the prototypical chiral molecule 1-iodo-2-methylbutane, probed by extreme-ultraviolet (XUV) pulses from the Free-electron LASer in Hamburg (FLASH) through the ultrafast evolution of the iodine 4d binding energy. Methodologically, we employ electron-ion partial covariance imaging as a technique to isolate otherwise elusive features in a two-dimensional photoelectron spectrum arising from different photofragmentation pathways. The experimental and theoretical results for the time-resolved electron spectra of the 4d 3/2 and 4d 5/2 atomic and molecular levels that are disentangled by this method provide a key step towards studying structural and chemical changes from a specific spectator site.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Low-cost calculation and analysis of 2D IR spectra of model diiron trinitrosyl complexes in the NO stretch region with vibrational perturbation theory

Two-dimensional infrared spectroscopy offers unique capabilities for probing vibrational coupling in complex metal–ligand systems. In this paper, we combine two-dimensional infrared spectroscopy with vibrational perturbation theory to investigate vibrational coupling in a diiron trinitrosyl complex across three stable redox states. Although these systems are challenging for electronic structure methods, we demonstrate that key features of experimental 2D IR spectra can be accurately reproduced using reduced-dimensional anharmonic calculations with a small harmonic frequency scaling. Analysis reveals that N–O stretching modes maintain high locality across all redox states, with coupling patterns that directly reflect variations in Fe–N bond strength. Using curvilinear coordinate analysis, we demonstrate these differences result from systematic changes in cubic anharmonic force constants rather than mode delocalization. Our results establish N–O stretches as sensitive probes of metal–ligand bonding strength, expanding the toolkit for studying biologically relevant nitrosyl complexes.

Moran, Hayden A. [Texas A&M University, College St↗
DOE OSTI2025

Mineralized sclerites in the gorgonian coral Leptogorgia chilensis as a natural jamming system

The soft corals (Cnidaria, Octocorallia), a diverse group of colonial marine invertebrates, can reversibly tune their body stiffness in response to external stimuli. This capability is attributed to their dynamic skeletal systems, which consist of thousands of mineralized skeletal elements, called sclerites, embedded within a gel-like matrix that swells/deswells and unjams/jams the sclerites, thus modulating skeletal stiffness. While sclerite morphology is widely used for species identification, its role in the mechanical performance of a soft coral’s skeletal system is largely unknown. Here, we investigated structure-jamming relationships in sclerite-based skeletal architectures using the red gorgonian octocoral Leptogorgia chilensis as a model system. The sclerites of L. chilensis exhibit a shaft-like geometry with two axial branches and two sets of triradiate side branches, which are aligned with the crystallographic symmetry of the constituent magnesium-containing calcite. By combining multiscale three-dimensional (3D) structural characterization, parametric geometrical modeling, 3D printing, mechanical testing, and discrete element simulations, we demonstrate how sclerite geometry achieves a balanced jamming performance in terms of stiffness, weight, strength, and fracture resistance in comparison to alternative geometries parametrically modified from the native sclerites (e.g., changes in the length and number of side branches). Here, we also found that these performance metrics are achieved through the effective interlocking among side and axial branches, which is further enhanced by the fractal-like microscopic spikes on the branch tips. The findings in this natural jamming system offer insights for designing synthetic mechanotunable material architectures for a wide range of applications, from soft robotics to mechanical dampeners.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Microscopic Imprints of Learned Solutions in Tunable Networks

In physical networks trained using supervised learning, physical parameters are adjusted to produce desired responses to inputs. An example is an electrical contrastive local learning network of nodes connected by edges that adjust their conductances during training. When an edge conductance changes, it upsets the current balance of every node. In response, physics adjusts the node voltages to minimize the dissipated power. Learning in these systems is therefore a coupled double-optimization process, in which the network descends both a cost landscape in the high-dimensional space of edge conductances and a physical landscape—the power dissipation—in the high-dimensional space of node voltages. Because of this coupling, the physical landscape of a trained network contains information about the learned task. Here, we derive a structure-function relation for trained tunable networks and demonstrate that all the physical information relevant to the trained input-output relation can be captured by a tuning susceptibility, an experimentally measurable quantity. We supplement our theoretical results with simulations to show that the tuning susceptibility is correlated with functional importance and that we can extract physical insight into how the system performs the task from the conductances of highly susceptible edges. Our analysis is general and can be applied directly to mechanical networks, such as networks trained for protein-inspired function such as allostery.

36 MATERIALS SCIENCE↗