Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “determinant”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Calibration and evaluation of Skylab altimetry for geodetic determination of the geoid

The author has identified the following significant results. The analysis was based on a time series intrinsic relationship between the satellite ephemeris, altimeter measured ranges, and the corresponding a priori values of subsatellite geoidal heights. Using, least squares processing with parameter weighting, the objective was to recover: (1) the absolute geoidal heights of the subsatellite points; and (2) the associated altimeter calibration constants. Preliminary results from Skylab mission SL-2 are given, using various combinations from two sets of orbit ephemeris and altimeter ranges. It is shown that correctly scaled geoidal heights cannot be deduced by merely subtracting the altimeter range from the geodetic height of the satellite unless the satellite ephemeris and the altimeter have no unknown significant systematic errors or biases and drifts. It is emphasized that the primary objective of the Skylab altimeter is to determine the instrument feasibility. Any additional applications of the data such as for geodesy, geophysics, and oceanography are desirable. Although accurate orbit is required for such applications, it is not a prerequisite for determining the instrument feasibility.

Mourad, A. G.↗
NASA NTRS1973

A determination of meteor mass distribution from meteor echoes

Meteor counts from observations at four magnitudes in the range of about +9 to +15 in the visual scale were used to determine the exponent of the mass distribution law under certain assumptions. Since for these data no range measures were available, and since the pattern of the transmitting/receiving antennas was very broad, the same range and radiant distribution were assumed for all counts within the same half hour during which individual counts at different magnitudes were obtained. These echo counts, covering in five successive days 24 hr with overlapping periods, yielded for the exponent a value of 1.95 + or - 0.02, close to other determinations. Individual values, however, presented a considerable scatter, probably reflecting changes in radiant and mass distribution over the year. From the same data, it appeared that the mass exponent changed during the day, yielding generally a higher value for the evening hours.

Forti, G.↗
NASA NTRS1974

Acoustic determination of cracks in welded joints

The acoustic analysis method permits detection of any cracks that might take place and their manner of propagation. The study deals with the cracks produced in experiments to determine the welding technology for a welded gray cast iron workpiece by using piezoelectric transducers to determine vibration acceleration.

Baltanoiu, M.↗
NASA NTRS1974

Altitude determination and descriptive analysis of clouds on ERTS-1 multispectral photography

A simple method to determine the approximate altitude of clouds is described, with the objective of refining their classification using only marginal data from the photographs. Results of the application of this method on photographs of the Goajira Peninsula, Paraguana Peninsula and the Central Coast of Venezuela are presented. Here, the altitudes computed are used to classify clouds and to identify the genus of others without typical form. Instability of air masses through clouds vertical development, and wind direction as well as other local climatic characteristics such as moisture content, loci of condensation, area, etc. are determined using repetitive coverage for the time interval of the photography. Applications for the regional and urban planning (including airport location and flights schedule) and natural resources evaluation are suggested.

Albrizzio, C.↗
NASA NTRS1974

The use of color infrared aerial photography in determining salt marsh vegetation and delimiting man-made structures of Lynnhaven Bay, Virginia

Color infrared aerial photography was found to be superior to color aerial photography in an ecological study of Lynnhaven Bay, Virginia. The research was divided into three phases: (1) Determination of the feasibility of correlating color infrared aerial photography with saline wetland species composition and zonation patterns, (2) determination of the accuracy of the aerial interpretation and problems related to the aerial method used; and (3) comparison of developed with undeveloped areas along Lynnhaven Bay's shoreline. Wetland species composition and plant community zonation bands were compared with aerial infrared photography and resulted in a high degree of correlation. Problems existed with changing physical conditions; time of day, aircraft angle and sun angle, making it necessary to use several different characteristics in wetland species identification. The main characteristics used were known zonation patterns, textural signatures and color tones. Lynnhaven Bay's shoreline was 61.5 percent developed.

Holman, R. E., III↗
NASA NTRS1974

Development of computer programs to determine the aerodynamic characteristics of complete light aircraft

A computer program for determining the flight characteristics of light aircraft was developed. The parameters which were used in the computer program are defined. The accuracy of the system for various types of airfoils is analyzed and the airfoils for which the system does not provide adequate data are identified. The application of a computer program for predicting the fuselage characteristics is discussed. The assumptions and parameters of the fuselage characteristics program are explained. It is stated that the computer programs make it possible to determine the response of a light aircraft to a small disturbance given the geometric and inertial characteristics of the aircraft.

Smetana, F. O.↗
NASA NTRS1974

A study to determine the usefulness of interval analysis in solving problems in celestial mechanics

This investigation was undertaken to determine the usefulness of interval analysis to numerical integration and matrix inversion techniques and to combine these results to determine the value of interval analysis in bounding computational errors in the two-body problem. Conclusions were that interval analysis may be worthwhile in certain small scale isolated problems, but its usefulness in any large scale problem is doubtful.

Walling, D.↗
NASA NTRS1973

Ion time-of-flight determinations of doubly to singly ionized mercury ion ratios from a mercury electron bombardment discharge

Doubly to singly charged mercury ion ratios in electron bombardment ion thruster exhaust beams have been determined as functions of bombardment discharge potential, thrust beam current, thrust beam radial position, acceleration-deceleration voltage ratio, and propellant utilization fraction. A mathematical model for two-step ionization processes has been derived, and calculated ion ratios are compared to observed ratios. Production of Hg(++) appears to result primarily from sequential ionization of Hg(+) in the discharge. Experimental and analytical results are presented, and design, construction, and operation features of an electrostatic deflection ion time-of-flight analyzer for the determination of the above-mentioned ratios are reviewed.

Sellen, J. M., Jr.↗
NASA NTRS1974

The determination of soil moisture by extraction and gas chromatography

Soil moisture content was determined by extracting soil with methanol and subsequently analyzing the extract for water by gas chromatography. With air-dried mineral soils, this method gave slightly higher moisture content values than those obtained by the oven-dry method. Moisture content was determined quantitatively in soils to which various amounts of water had been added. The complete procedure, including extraction and analysis, requires less than one hour and gives results that closely compare to the oven-dry method.

Merek, E. L.↗
NASA NTRS1974

A test procedure for determining the influence of stress ratio on fatigue crack growth

A test procedure is outlined by which the rate of fatigue crack growth over a range of stress ratios and stress intensities can be determined expeditiously using a small number of specimens. This procedure was developed to avoid or circumvent the effects of load interactions on fatigue crack growth, and was used to develop data on a mill annealed Ti-6Al-4V alloy plate. Experimental data suggest that the rates of fatigue crack growth among the various stress ratios may be correlated in terms of an effective stress intensity range at given values of K max. This procedure is not to be used, however, for determining the corrosion fatigue crack growth characteristics of alloys when nonsteady-state effects are significant.

Fitzgerald, J. H.↗
NASA NTRS1974

Is the present stellar birthrate really determined by gas density

The assumption that the present star formation rate is determined primarily by the gas density is examined with respect to its consistency with the results of recent studies of supernovae rates in Sb and Sc galaxies and mean H I space densities in the disks of these galaxies. A recent reexamination of the mean gas density in the Sb and Sc galaxies is shown to imply that, if the 'clumpiness' of gas in the disks of these galaxies is similar, the gas density is not the primary factor in determining the overall present stellar birthrate.

Black, D. C.↗
NASA NTRS1974

The determination of ethanol in blood and urine by mass fragmentography

A mass fragmentographic technique for a rapid, specific and sensitive determination of ethanol in blood and urine is described. A Varian gas chromatograph coupled through an all-glass membrane separator to a Finnigan quadripole mass spectrometer and interfaced to a computer system is used for ethanol determination in blood and urine samples. A procedure for plotting calibration curves for ethanol quantitation is also described. Quantitation is achieved by plotting the peak area ratios of undeuterated-to-deuterated ethanol fragment ions against the amount of ethanol added. Representative results obtained by this technique are included.

Pereira, W. E.↗
NASA NTRS1974

Real-time shipboard orbit determination using Kalman filtering techniques

The real-time tracking and orbit determination program used on board the NASA tracking ship, the USNS Vanguard, is described in this paper. The computer program uses a variety of filtering algorithms, including an extended Kalman filter, to derive real-time orbit determinations (position-velocity state vectors) from shipboard tracking and navigation data. Results from Apollo missions are given to show that orbital parameters can be estimated quickly and accurately using these methods.

Brammer, R. F.↗
NASA NTRS1972

Applications of the direct photon absorption technique for measuring bone mineral content in vivo. Determination of body composition in vivo

The bone mineral content, BMC, determined by monoenergetic photon absorption technique, of 29 different locations on the long bones and vertebral columns of 24 skeletons was measured. Compressive tests were made on bone from these locations in which the maximum load and maximum stress were measured. Also the ultimate strain, modulus of elasticity and energy absorbed to failure were determined for compact bone from the femoral diaphysis and cancellous bone from the eighth through eleventh thoracic vertebrae. Correlations and predictive relationships between these parameters were examined to investigate the applicability of using the BMC at sites normally measured in vivo, i.e. radius and ulna in estimating the BMC and/or strength of the spine or femoral neck. It was found that the BMC at sites on the same bone were highly correlated r = 0.95 or better; the BMC at sites on different bones were also highly interrelated, r = 0.85. The BMC at various sites on the long bones could be estimated to between 10 and 15 per cent from the BMC of sites on the radius or ulna.

Cameron, J. R.↗
NASA NTRS1974

Determining iconometric parameters of imaging devices using a wide-angle collimator

The problem of determining the iconometric parameters of the imaging device can be solved if the camera being calibrated is used to obtain the image of a group of reference points, the directions to which are known. In order to specify the imaging device coordinate system, it is sufficient in principle to obtain on the picture the images of three reference points which do not lie on a single straight line. Many more such points are required in order to determine the distortion corrections, and they must be distributed uniformly over the entire field of view of the camera being calibrated. Experimental studies were made using this technique to calibrate photographic and phototelevision systems. Evaluation of the results of these experiments permits recommending collimators for calibrating television and phototelevision imaging systems, and also short-focus small-format photographic cameras.

Ziman, Y. L.↗
NASA NTRS1974

Determination of rare-earth elements in Luna 16 regolith sample by chemical spectral method

An analysis was made of regolith from layer A of the Luna 16 sample for rare earth elements, by a chemical spectral method. Chemical and ion exchange concentrations were used to determine the content of 12 elements and Y at the level 0.001 to 0.0001 percent with 10 to 15 percent reproducibility of the emission determination. Results within the limits of reproducibility agree with data obtained by mass spectra, activation, and X-ray fluorescent methods.

Stroganova, N. S.↗
NASA NTRS1973

Feasibility study ASCS remote sensing/compliance determination system

A short-term technical study was performed by the MSC Earth Observations Division to determine the feasibility of the proposed Agricultural Stabilization and Conservation Service Automatic Remote Sensing/Compliance Determination System. For the study, the term automatic was interpreted as applying to an automated remote-sensing system that includes data acquisition, processing, and management.

Duggan, I. E.↗
NASA NTRS1974

Computer simulation of the threshold sensitivity determinations

A computer simulation study was carried out to evaluate various methods for determining threshold stimulus levels for impact sensitivity tests. In addition, the influence of a number of variables (initial stimulus level, particular stimulus response curve, and increment size) on the apparent threshold values and on the corresponding population response levels was determined. Finally, a critical review of previous assumptions regarding the stimulus response curve for impact testing is presented in the light of the simulation results.

Gayle, J. B.↗