Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “designed experiment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Study of process variables associated with manufacturing hermetically-sealed nickel-cadmium cells

A program to determine and study the critical process variables associated with the manufacture of aerospace, hermetically-sealed, nickel-cadmium cells is described. The determination and study of the process variables associated with the positive and negative plaque impregnation/polarization process are emphasized. The experimental data resulting from the implementation of fractional factorial design experiments are analyzed by means of a linear multiple regression analysis technique. This analysis permits the selection of preferred levels for certain process variables to achieve desirable impregnated plaque characteristics.

Miller, L.↗

The MSFC UNIVAC 1108 EXEC 8 simulation model

A model is presented which simulates the MSFC Univac 1108 multiprocessor system. The hardware/operating system is described to enable a good statistical measurement of the system behavior. The performance of the 1108 is evaluated by performing twenty-four different experiments designed to locate system bottlenecks and also to test the sensitivity of system throughput with respect to perturbation of the various Exec 8 scheduling algorithms. The model is implemented in the general purpose system simulation language and the techniques described can be used to assist in the design, development, and evaluation of multiprocessor systems.

Williams, T. G.↗

A study of pilot modeling in multi-controller tasks

A modeling approach, which utilizes a matrix of transfer functions to describe the human pilot in multiple input, multiple output control situations, is studied. The approach used was to extend a well established scalar Wiener-Hopf minimization technique to the matrix case and then study, via a series of experiments, the data requirements when only finite record lengths are available. One of these experiments was a two-controller roll tracking experiment designed to force the pilot to use rudder in order to coordinate and reduce the effects of aileron yaw. One model was computed for the case where the signals used to generate the spectral matrix are error and bank angle while another model was computed for the case where error and yaw angle are the inputs. Several anomalies were observed to be present in the experimental data. These are defined by the descriptive terms roll up, break up, and roll down. Due to these algorithm induced anomalies, the frequency band over which reliable estimates of power spectra can be achieved is considerably less than predicted by the sampling theorem.

Whitbeck, R. F.↗

ATS-5 signal characteristics at 15.3 GHz and related experiments at 15 and 35 GHz. Part 1: Basic features of the experiments and primary results

The results are presented of observations by the University of Texas of the 15.3 GHz experiment associated with the ATS-5 satellite and of related experiments designed to provide information on earth-satellite communication links at 15.3 and 31.65 GHz. The 15.3 GHz transmissions were observed at Austin, Texas over an eighteen month interval primarily during periods of rain. Measurements were also made at Mount Locke, near Fort Davis, Texas but only for a period of two months. Essentially continuous measurements were made at Austin, Texas of the sky temperature at 35 GHz looking in the direction of the ATS-5 satellite over an interval of four months. Point-to-point transmissions over the earth's surface at 15 and 35 GHz and various meteorological parameters were studied as possible means of predicting performance over a satellite-earth path.

Straiton, A. W.↗

Recent progress in the remote detection of vapours and gaseous pollutants

Work has been continuing on the correlation spectrometry techniques described at previous remote sensing symposiums. Advances in the techniques are described which enable accurate quantitative measurements of diffused atmospheric gases to be made using controlled light sources, accurate quantitative measurements of gas clouds relative to background using solar illumination and semi-quantitation measurements of well diffused atmospheric gases using solar illumination. Specific applications of these techniques are described including preliminary results of a high altitude balloon experiment designed to test the feasibility of measuring pollution at the earth's surface from high altitude balloons and satellites.

Moffat, A. J.↗

Measurement of the degree of anisotropy of the cosmic radiation using the IMP space vehicle

The detector and data reduction techniques used in connection with the cosmic ray experiments designed for and flown on Explorer 34 and 41 satellites are described. A history of the program development and the present status of data processing are briefly summarized. The instrument to measure the anisotropy and energy spectra of cosmic ray electrons and protons, and X-rays of solar and galactic origin is discussed. The main characteristics of the detectors and the stability during 23 months of operation are described. The method of analysis of the angular distribution of solar cosmic ray particles in the ecliptic plane is given. It is shown that the anisotropy of low energy particles of solar origin decreases sharply to a very small value when the satellite penetrates the magnetosphere.

Palmeira, R. A. R.↗

Fluid mechanics and meteorological studies directed toward improved forecasting of CAT.

Discussion of fluid mechanics experiments designed to verify theoretical understanding of the stability of stratified shear flows. Meteorological analyses of CAT encounters are reviewed, and attempts are made to tie this information together to investigate possible improvements in CAT forecasting methods. The essential facts are presented in a form intended to be useful to forecasters and flight crews.

Stoeffler, R. C.↗

Tests of a procedure for inserting satellite radiance measurements into a numerical circulation model.

Description of experiments designed to test the sensitivity of a new method for retrieving vertical temperature profiles from satellite radiance measurements to the initial guess of temperature distribution. Emphasis is placed on initial guesses of the kind that would be provided by a numerical model of the atmospheric circulation, with the objective of developing a procedure for direct use of satellite radiation measurements as input to a numerical forecasting scheme.

Hogan, J. S.↗

Effect of set size, age, and mode of stimulus presentation on information-processing speed.

First, second, and third grade pupils served as subjects in an experiment designed to show the effect of age, mode of stimulus presentation, and information value on recognition time. Stimuli were presented in picture and printed word form and in groups of 2, 4, and 8. The results of the study indicate that first graders are slower than second and third graders who are nearly equal. There is a gross shift in reaction time as a function of mode of stimulus presentation with increase in age. The first graders take much longer to identify words than pictures, while the reverse is true of the older groups. With regard to set size, a slope appears in the pictures condition in the older groups, while for first graders, a large slope occurs in the words condition and only a much smaller one for pictures.

Norton, J. C.↗

Development of uniform and predictable battery materials for nickel-cadmium aerospace cells

The objective of this study was to analyze battery materials and manufacturing methods with the aim of developing uniform and predictable battery plates for nickel cadmium aerospace cells. The results are presented of an extensive factorially-designed experiment aimed at illuminating, in a comparative study, the effect of plaque preparation, plaque thickness, impregnation process, and loading level with active material. The following impregnation processes were investigated: (1) chemical conversion, (2) electrochemical conversion, and (3) high temperature electrochemical impregnation. The test parameter on which the conclusion regarding the manufacturing variables are based was the capacity change during a simulated near-earth orbit cycle regime. As operational variables, the effect of various charge and discharge rates was investigated. During the 100 test cycles, overall capacity changes of positive plates and the differences between the various plates were found to be small. Plates prepared by the high temperature electrochemical impregnation of slurry-coated plaque (at the conditions used) showed surface buildup of active material. They also retained slightly less of their capacity during cycling compared to other plate preparations.

Source record↗

Development of guidelines for the definition of the relavant information content in data classes

The problem of experiment design is defined as an information system consisting of information source, measurement unit, environmental disturbances, data handling and storage, and the mathematical analysis and usage of data. Based on today's concept of effective computability, general guidelines for the definition of the relevant information content in data classes are derived. The lack of a universally applicable information theory and corresponding mathematical or system structure is restricting the solvable problem classes to a small set. It is expected that a new relativity theory of information, generally described by a universal algebra of relations will lead to new mathematical models and system structures capable of modeling any well defined practical problem isomorphic to an equivalence relation at any corresponding level of abstractness.

Schmitt, E.↗

Gravitation theory - Empirical status from solar system experiments.

Review of historical and recent experiments which speak in favor of a post-Newtonian relativistic gravitational theory. The topics include the foundational experiments, metric theories of gravity, experiments designed to differentiate among the metric theories, and tests of Machian concepts of gravity. It is shown that the metric field for any metric theory can be specified by a series of potential terms with several parameters. It is pointed out that empirical results available up to date yield values of the parameters which are consistent with the prediction of Einstein's general relativity.

Nordtvedt, K. L., Jr.↗

ATS-F COMSAT millimeter wave propagation experiment.

Description of the transmitting and receiving system configurations to be used in an ATS-F propagation experiment designed to gather data on the attenuation of satellite uplink signals (at approximately 13.2 and 17.8 GHz) due to atmospheric hydrometeors (mostly rain). The data will be used for statistical determination of system power margins required for operational communications systems at frequencies above 10 GHz. A secondary analysis will study site diversity as a means of reducing the required system margins. A spacecraft transponder receives signals from 15 dual-frequency ground transmitter stations and retransmits these signals to a central ground receiving terminal at a frequency of 4 GHz.

Levatich, J. L.↗

An experimental study of the temporal statistics of radio signals scattered by rain

A fixed-beam bistatic CW experiment designed to measure the temporal statistics of the volume reflectivity produced by hydrometeors at several selected altitudes, scattering angles, and at two frequencies (3.6 and 7.8 GHz) is described. Surface rain gauge data, local meteorological data, surveillance S-band radar, and great-circle path propagation measurements were also made to describe the general weather and propagation conditions and to distinguish precipitation scatter signals from those caused by ducting and other nonhydrometeor scatter mechanisms. The data analysis procedures were designed to provide an assessment of a one-year sample of data with a time resolution of one minute. The cumulative distributions of the bistatic signals for all of the rainy minutes during this period are presented for the several path geometries.

Hubbard, R. W.↗

Influence of gravity-free solidification on microsegregation

Single crystalline germanium has been grown for the first time in space aboard Skylab Mission No. 2. The crystal growth experiment, designed to characterize the influence of gravity-free solidification on microsegregation of a semiconductor material, contained three crystals. One was doped with Ga; the second with Sb; and the third with B. Portions of the germanium crystals were remelted and subsequently resolidified at 5 microns per second under controlled conditions by the gradient freeze technique. Detailed spreading resistance measurements made on the Ga doped Ge crystals indicate that microsegregation in space is reduced by two to five-fold in the bulk and eight-fold near the surface, while macrosegregation in space is reduced by six-fold in the bulk. The effective segregation coefficient for Ga in Ge was analyzed extensively and was found to be larger for space solidification. This has the implication that the solute boundary layer at the growth interface in space is correspondingly thinner. The solidification interface is significantly smoother and is found to be initially convex toward the melt in space. A convective mixing model has been advanced to explain the absence of gravity on convective mixing and solute segregation during solidification.

Yue, J. T.↗

Vegetation density as deduced from ERTS-1 MSS response

Reflectance from vegetation increases with increasing vegetation density in the 0.75- to 1.35 micron wavelength interval. Therefore, ERTS-1 bands 6 (0.7 to 0.8 micron) and 7 (0.8 to 1.1 micron) contain information that should relate to the probable yield of crops and the animal carrying capacity of rangeland. The results of an experiment designed specifically to test the relations among leaf area index (LAI), plant population, plant cover and plant height, and the ERTS-1 MSS responses for 3 corn, 10 sorghum, and 10 cotton fields are given. Plant population was as useful as LAI for characterizing the sorghum and corn fields, and plant height was as good as LAI for characterizing cotton fields. These findings generally support the utility of ERTS-1 data for explaining variability in green biomass, harvestable forage and other indicators of productivity.

Wiegand, C. L.↗

Stress corrosion in titanium alloys and other metallic materials

Multiple physical and chemical techniques including mass spectroscopy, atomic absorption spectroscopy, gas chromatography, electron microscopy, optical microscopy, electronic spectroscopy for chemical analysis (ESCA), infrared spectroscopy, nuclear magnetic resonance (NMR), X-ray analysis, conductivity, and isotopic labeling were used in investigating the atomic interactions between organic environments and titanium and titanium oxide surfaces. Key anhydrous environments studied included alcohols, which contain hydrogen; carbon tetrachloride, which does not contain hydrogen; and mixtures of alcohols and halocarbons. Effects of dissolved salts in alcohols were also studied. This program emphasized experiments designed to delineate the conditions necessary rather than sufficient for initiation processes and for propagation processes in Ti SCC.

Harkins, C. G.↗

A north-south stationkeeping ion thruster system for ATS-F

A one millipound cesium ion thruster system experiment designed for the ATS-F satellite will be used to demonstrate north-south stationkeeping for synchronous satellites. Development effort leading to the present design will be described and test data for qualification and flight acceptance tests will be presented. These include a review of EMI evaluations tests made with the power conditioning subsystem and the thruster simulator, and an extended system operational test. During the extended test, 90 on-off cycles simulated thruster operation in orbit. A planned 18,000 hour ground test of a flight qualified thruster will be discussed.

James, E.↗