Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “data requests”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36
All sourcesNASA NTRSDOE OSTI
NASA NTRS1999

Using a Commerical off the Shelf Data Acquisition System for the Space Shuttle Solid Rocket Booster Program

The space shuttle solid rocket boosters (SRBs) experience a severe environment during their brief flight. During the last few years several SRB's have sustained noticeable structural damage. The environmental characteristics (vibration, structure, and thermal) encountered by the SRB's during ascent, descent and water impact are in most cases unknown. A developmental flight instrumentation (DFI) system collected data from the SRBs' first four flights in the early 1980's, and after the first three flights during the shuttle return-to-flight phase after the Challenger accident. However, the DFI data collected are of low fidelity and do not correlate well with cases of observed structural damage. The DFI system was evaluated for reuse, but the cost to fly it was prohibitive. The space shuttle is presently scheduled to fly until 2030. To support the shuttle flight schedule, avionics on the SRB's will be upgraded. The environments on the different sections of the SRB will need to be defined more completely to properly qualify the avionics for multiple flights. The DFI data previously gathered do not provide enough information to properly qualify the avionics. Marshall Space Flight Center's (MSFC) SRB Project Office requested the Science and Engineering (S&E) Directorate to develop a stand-alone data acquisition system that could collect data from any area of the booster. In answer to this requirement, S&E developed the Enhanced Data Acquisition System (EDAS). To minimize development time and cost, the development team used state-of-the-art commercial off the shelf (COTS) equipment. The first two flights of this system occurred on shuttle mission STS-91 in June 1998 and STS-95 in October 1998. Twenty-one measurements were successfully recorded on the STS-91 right hand booster, providing new accelerometer, strain, temperature, and heating rate data to analysts. Twenty-four measurements were successfully recorded on the STS-95 left hand booster, providing data from the booster and the external tank. This paper summarizes the effort to develop, test, qualify and fly the EDAS to meet SRB flight and data collection requirements.

Crawford, Kevin↗
NASA NTRS2010

An Overview of the Landsat Data Continuity Mission

The advent of the Landsat Data Continuity Mission (LDCM), currently with a launch readiness date of December, 2012, will see evolutionary changes in the Landsat data products available from the U.S. Geological Survey (USGS) Earth Resources Observation and Science (EROS) Center. The USGS initiated a revolution in 2009 when EROS began distributing Landsat data products at no cost to requestors in contrast to the past practice of charging the cost of fulfilling a request; that is, charging $600 per Landsat scene. To implement this drastic change, EROS terminated data processing options for requestors and began to produce all data products using a consistent processing recipe. EROS plans to continue this practice for the LDCM and will required new algorithms to process data from the LDCM sensors. All previous Landsat satellites flew multispectral scanners to collect image data of the global land surface. Additionally, Landsats 4, 5, and 7 flew sensors that acquired imagery for both reflective spectral bands and a single thermal band. In contrast, the LDCM will carry two pushbroom sensors; the Operational Land Imager (OLI) for reflective spectral bands and the Thermal InfraRed Sensor (TIRS) for two thermal bands. EROS is developing the ground data processing system that will both calibrate and correct the data from the thousands of detectors employed by the pushbroom sensors and that will also combine the data from the two sensors to create a single data product with registered data for all of the OLI and TIRS bands.

Irons, James R.↗
NASA NTRS1999

Hyperspectral Imaging and Related Field Methods: Building the Science

The proposal requested funds for the computing power to bring hyperspectral image processing into undergraduate and graduate remote sensing courses. This upgrade made it possible to handle more students in these oversubscribed courses and to enhance CSES' summer short course entitled "Hyperspectral Imaging and Data Analysis" provided for government, industry, university and military. Funds were also requested to build field measurement capabilities through the purchase of spectroradiometers, canopy radiation sensors and a differential GPS system. These instruments provided systematic and complete sets of field data for the analysis of hyperspectral data with the appropriate radiometric and wavelength calibration as well as atmospheric data needed for application of radiative transfer models. The proposed field equipment made it possible to team-teach a new field methods course, unique in the country, that took advantage of the expertise of the investigators rostered in three different departments, Geology, Geography and Biology.

Goetz, Alexander F. H.↗
NASA NTRS2013

Launch Support Video Site

The goal of this project is to create a website that displays video, countdown clock, and event times to customers during launches, without needing to be connected to the internal operations network. The requirements of this project are to also minimize the delay in the clock and events to be less than two seconds. The two parts of this are the webpage, which will display the data and videos to the user, and a server to send clock and event data to the webpage. The webpage is written in HTML with CSS and JavaScript. The JavaScript is responsible for connecting to the server, receiving new clock data, and updating the webpage. JavaScript is used for this because it can send custom HTTP requests from the webpage, and provides the ability to update parts of the webpage without having to refresh the entire page. The server application will act as a relay between the operations network, and the open internet. On the operations network side, the application receives multicast packets that contain countdown clock and events data. It will then parse the data into current countdown times and events, and create a packet with that information that can be sent to webpages. The other part will accept HTTP requests from the webpage, and respond to them with current data. The server is written in C# with some C++ files used to define the structure of data packets. The videos for the webpage will be shown in an embedded player from UStream.

OFarrell, Zachary L.↗
NASA NTRS2003

Ground-Level Solar Cosmic Ray Data from Solar Cycle 19

The purpose of this grant was to locate, catalog, and assemble, in standard computer format, ground-level solar cosmic ray data acquired by cosmic ray detectors for selected events in the 19th solar cycle. The events for which we initially proposed to obtain these data were for the events of 23 February 1956,4 May 1960, 12 and 15 November 1960 and 18 and 20 July 1961. These were the largest events of the 19th solar cycle. However, a severe (more than 50%) reduction in the requested funding, required the work effort be limited to neutron monitor data for the 23 February 1956 event and the three major events in 1960.

Shea, M. A.↗
DOE OSTI2024

Updates to the ATLAS Data Carousel Project

The High Luminosity upgrade to the LHC (HL-LHC) is expected to deliver scientific data at the multi-exabyte scale. In order to address this unprecedented data storage challenge, the ATLAS experiment launched the Data Carousel project in 2018. Data Carousel is a tape-driven workflow whereby bulk production campaigns with input data resident on tape are executed by staging and promptly processing a sliding window to disk buffer such that only a small fraction of inputs are pinned on disk at any one time. Data Carousel is now in production for ATLAS in Run3. In this paper, we provide updates on recent Data Carousel R&D projects, including data-on-demand and tape smart writing. Data-on-demand removes from disk data that has not been accessed for a predefined period, when users request them, they will be either staged from tape or recreated by following the original production steps. Tape smart writing employs intelligent algorithms for file placement on tape in order to retrieve data back more efficiently, which is our long term strategy to achieve optimal tape usage in Data Carousel.

42 ENGINEERING↗
NASA NTRS1974

Image selection system

An image selection (ISS) was developed for the NASA-Ames Research Center Earth Resources Aircraft Project. The ISS is an interactive, graphics oriented, computer retrieval system for aerial imagery. An analysis of user coverage requests and retrieval strategies is presented, followed by a complete system description. Data base structure, retrieval processors, command language, interactive display options, file structures, and the system's capability to manage sets of selected imagery are described. A detailed example of an area coverage request is graphically presented.

Knutson, M. A.↗
DOE OSTI2014

Integration of a constraint-based metabolic model of Brassica napus developing seeds with 13 C-metabolic flux analysis

The use of large-scale or genome-scale metabolic reconstructions for modeling and simulation of plant metabolism and integration of those models with large-scale omics and experimental flux data is becoming increasingly important in plant metabolic research. Here we report an updated version of bna572, a bottom-up reconstruction of oilseed rape (Brassica napus L.; Brassicaceae) developing seeds with emphasis on representation of biomass-component biosynthesis. New features include additional seed-relevant pathways for isoprenoid, sterol, phenylpropanoid, flavonoid, and choline biosynthesis. Being now based on standardized data formats and procedures for model reconstruction, bna572+ is available as a COBRA-compliant Systems Biology Markup Language (SBML) model and conforms to the Minimum Information Requested in the Annotation of Biochemical Models (MIRIAM) standards for annotation of external data resources. Bna572+ contains 966 genes, 671 reactions, and 666 metabolites distributed among 11 subcellular compartments. It is referenced to the Arabidopsis thaliana genome, with gene-protein-reaction (GPR) associations resolving subcellular localization. Detailed mass and charge balancing and confidence scoring were applied to all reactions. Using B. napus seed specific transcriptome data, expression was verified for 78% of bna572+ genes and 97% of reactions. Alongside bna572+ we also present a revised carbon centric model for 13 C-Metabolic Flux Analysis ( 13 C-MFA) with all its reactions being referenced to bna572+ based on linear projections. By integration of flux ratio constraints obtained from 13 C-MFA and by elimination of infinite flux bounds around thermodynamically infeasible loops based on COBRA loopless methods, we demonstrate improvements in predictive power of Flux Variability Analysis (FVA). In conclusion, using this combined approach we characterize the difference in metabolic flux of developing seeds of two B. napus genotypes contrasting in starch and oil content.

13C-metabolic flux analysis↗
NASA NTRS1999

Image transfer protocol in progressively increasing resolution

A method of transferring digital image data over a communication link transforms and orders the data so that, as data is received by a receiving station, a low detail version of the image is immediately generated with later transmissions of data providing progressively greater detail in this image. User instructions are accepted, limiting the ultimate resolution of the image or suspending enhancement of the image except in certain user defined regions. When a low detail image is requested followed by a request for a high detailed version of the same image, the originally transmitted data of the low resolution image is not discarded or retransmitted but used with later data to improve the originally transmitted image. Only a single copy of the transformed image need be retained by the transmitting device in order to satisfy requests for different amounts of image detail.

Percival, Jeffrey W.↗
DOE OSTI2026

Comparative Analysis of Report-Back of Research Results Strategies for Personal Chemical Exposure Data

Background. Report-back of research results (RBRR) is ethically supported and highly requested by participants yet lacks broadly transferable guidelines for RBRR. Effective RBRR must be responsive to target audience needs and may not be addressed by a ‘one-size-fits-all’ approach. Objective. Within a subset of our 19 studies on RBRR, we had the unique opportunity to carry out a comparative analysis of RBRR strategies across cohorts with similar development and evaluation methods, yet distinct in life stage, geography, number and type of chemicals assessed, and community contexts. Methods. We highlight key outcomes from three environmental health studies: an ongoing New York, NY cohort (Fair Start; n=486) and a Detroit, MI cohort (CLEAR; n=34) assessing exposure to ambient urban pollution during pregnancy, and a longitudinal cohort in Houston, TX (Houston-3H) following Hurricane Harvey (n=312). Focus group and survey data were analyzed to identify lessons learned and explore how RBRR supports understanding of environmental health. Results. Commonalities emerged in RBRR development, design, organization, and data visualization, as well as in how RBRR can contribute to an understanding of health-environment connections. Differences included preferences for individual versus community level findings, as well as distinguishable contextual considerations. For pregnancy cohorts, messaging was framed with cultural sensitivity, and to avoid unintended consequences of parental guilt due to prenatal exposures. In the post-disaster Houston-3H study, participants requested additional transparency regarding sampling design and study rationale. Significance. All RBRR case studies reported chemicals without known regulatory or health guidelines, so results were contextualized within the study population. Participants across cohorts requested multi-study comparisons to better understand their results beyond their communities. While foundational RBRR elements (e.g. plain language, graphic organizers) may supersede cohort-specific differences, RBRR should be personalized to encompass perceptions of health across different life-stage, cultural, and environmental contexts.

Vogel, Taylor J.↗
NASA NTRS2021

Performance Assessment of the Eastern Range Titusville-Cocoa 915-MHz Doppler Radar Wind Profiler

The United States Space Force (USSF) is responsible for space vehicle launches at its Eastern Range (ER), which includes the Cape Canaveral Space Force Station (CCSFS). Multiple systems are used to measure the atmosphere at the ER, including suites of Doppler Radar Wind Profilers (DRWPs)that operate at 915MHz and measure winds within the lowest few kilometers of the atmosphere. Observations of boundary layer winds can be used for multiple applications, including serving as input to toxic dispersion models and characterizing winds for low-level aborts. The USSF upgraded the Titusville-Cocoa(TICO)DRWP, which collected data during the spring and summer of 2020. The USSF also requested NASA’s Marshall Space Flight Center (MSFC) Natural Environments Branch (NE) to evaluate wind output from this DRWP system. This report describes the system and the analyses that MSFC NE conducted to demonstrate the system’s wind accuracy relative to balloons from the Automated Meteorological Profiling System (AMPS), data availability, and effective vertical resolution (EVR).

B. J. Barbre↗
DOE OSTI2021

TROPOMI NO 2 in the United States: A Detailed Look at the Annual Averages, Weekly Cycles, Effects of Temperature, and Correlation With Surface NO 2 Concentrations

Abstract Observing the spatial heterogeneities of NO 2 air pollution is an important first step in quantifying NO X emissions and exposures. This study investigates the capabilities of the Tropospheric Monitoring Instrument (TROPOMI) in observing the spatial and temporal patterns of NO 2 pollution in the continental United States. The unprecedented sensitivity of the sensor can differentiate the fine‐scale spatial heterogeneities in urban areas, such as emissions related to airport/shipping operations and high traffic, and the relatively small emission sources in rural areas, such as power plants and mining operations. We then examine NO 2 columns by day‐of‐the‐week and find that Saturday and Sunday concentrations are 16% and 24% lower respectively, than during weekdays. We also analyze the correlation of daily maximum 2‐m temperatures and NO 2 column amounts and find that NO 2 is larger on the hottest days (>32°C) as compared to warm days (26°C–32°C), which is in contrast to a general decrease in NO 2 with increasing temperature at moderate temperatures. Finally, we demonstrate that a linear regression fit of 2019 annual TROPOMI NO 2 data to annual surface‐level concentrations yields relatively strong correlation ( R 2 = 0.66). These new developments make TROPOMI NO 2 satellite data advantageous for policymakers and public health officials, who request information at high spatial resolution and short timescales, in order to assess, devise, and evaluate regulations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2017

artdaq : DAQ software development made simple

For a few years now, the artdaq data acquisition software toolkit has provided numerous experiments with ready-to-use components which allow for rapid development and deployment of DAQ systems. Developed within the Fermilab Scientific Computing Division, artdaq provides data transfer, event building, run control, and event analysis functionality. This latter feature includes built-in support for the art event analysis framework, allowing experiments to run art modules for real-time filtering, compression, disk writing and online monitoring; as art, also developed at Fermilab, is also used for online analysis, a major advantage of artdaq is that it allows developers to easily switch between developing online and online software. artdaq continues to be improved. Support for an alternate mode of running whereby data from some subdetector components are only streamed if requested has been added; this option will reduce unnecessary DAQ throughput. Real-time reporting of DAQ metrics has been implemented, along with the flexibility to choose the format through which experiments receive the reports; these formats include the Ganglia, Graphite and syslog software packages, along with at ASCII files. Additionally, work has been performed investigating more flexible modes of online monitoring, including the capability of being able to run multiple online monitoring processes on different hosts, each running its own set of art modules. Finally, a web-based GUI interface through which users can configure details of their DAQ system has been implemented, increasing the ease of use of the system. Already successfully deployed on the LArIAT, DarkSide-50, DUNE 35ton and Mu2e experiments, artdaq will be employed for SBND and is a strong candidate for use on ICARUS and protoDUNE. With each experiment comes new ideas for how artdaq can be made more flexible and powerful; the above improvements will be described, along with potential ideas for the future.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2021

Building Efficiency Targeting Tool for Energy Retrofits (BETTER) Application Programing Interface (API) (BETTER API) v1.0

The BETTER API allows advanced users and developers to access BETTER's analytical functionalities via HTTP requests from their own software platform without using the BETTER web-interface. API users prepare the input data and analysis configurations in a JSON format and send it to the web application via an HTTP request. The web application runs the analytical workflow on the back end and returns an HTTP response in JSON format. The user can then decide to render the results or further process it.

Szum, Carolyn↗
DOE OSTI2016

RANS Simulation VBM of Array of Three Coaxial Lab Scaled DOE RM1 MHK Turbine with 5D Spacing

Attached are the .cas and .dat files along with the required User Defined Functions (UDFs) and look-up table of lift and drag coefficients for the Reynolds Averaged Navier-Stokes (RANS) simulation of three coaxially located lab-scaled DOE RM1 turbine implemented in ANSYS FLUENT CFD-package. The lab-scaled DOE RM1 is a re-design geometry, based of the full scale DOE RM1 design, producing same power output as the full scale model, while operating at matched Tip Speed Ratio values at reachable laboratory Reynolds number (see attached paper). In this case study the flow field around and in the wake of the lab-scaled DOE RM1 turbines in a coaxial array is simulated using Blade Element Model (a.k.a Virtual Blade Model [VBM]) by solving RANS equations coupled with k-\omega turbulence closure model. It should be highlighted that in this simulation the actual geometry of the rotor blade is not modeled. The effect of turbine rotating blades are modeled using the Blade Element Theory. This simulation provides an accurate estimate for the performance of each device and structure of their turbulent far wake. The results of these simulations were validated against the developed in-house experimental data. Simulations for other turbine configurations are available upon request.

16 TIDAL AND WAVE POWER↗
NASA NTRS1976

Computer interface system

An interface logic circuit permitting the transfer of information between two computers having asynchronous clocks is disclosed. The information transfer involves utilization of control signals (including request, return-response, ready) to generate properly timed data strobe signals. Noise problems are avoided because each control signal, upon receipt, is verified by at least two clock pulses at the receiving computer. If control signals are verified, a data strobe pulse is generated to accomplish a data transfer. Once initiated, the data strobe signal is properly completed independently of signal disturbances in the control signal initiating the data strobe signal. Completion of the data strobe signal is announced by automatic turn-off of a return-response control signal.

Anderson, T. O.↗
NASA NTRS1983

Automatic-repeat-request error control schemes

Error detection incorporated with automatic-repeat-request (ARQ) is widely used for error control in data communication systems. This method of error control is simple and provides high system reliability. If a properly chosen code is used for error detection, virtually error-free data transmission can be attained. Various types of ARQ and hybrid ARQ schemes, and error detection using linear block codes are surveyed.

Lin, S.↗