Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cumulative”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Interconnect fatigue design for terrestrial photovoltaic modules

The results of comprehensive investigation of interconnect fatigue that has led to the definition of useful reliability-design and life-prediction algorithms are presented. Experimental data indicate that the classical strain-cycle (fatigue) curve for the interconnect material is a good model of mean interconnect fatigue performance, but it fails to account for the broad statistical scatter, which is critical to reliability prediction. To fill this shortcoming the classical fatigue curve is combined with experimental cumulative interconnect failure rate data to yield statistical fatigue curves (having failure probability as a parameter) which enable (1) the prediction of cumulative interconnect failures during the design life of an array field, and (2) the unambiguous--ie., quantitative--interpretation of data from field-service qualification (accelerated thermal cycling) tests. Optimal interconnect cost-reliability design algorithms are derived based on minimizing the cost of energy over the design life of the array field.

Mon, G. R.↗

Ground cloud related weather modification effects

The principal concerns about inadvertent weather modification by the solar power satellite system rocket effluents are discussed, namely the possibility that the ground cloud might temporarily modify local weather and the cumulative effects of nearly 500 launches per year. These issues are discussed through the consideration of (1) the possible alteration of the microphysical processes of clouds in the general area due to rocket effluents and debris and cooling water entrained during the launch and (2) the direct dynamical and thermodynamical responses to the inputs of thermal energy and moisture from the rocket exhaust for given ambient meteorological conditions. The huge amount of thermal energy contained in the exhaust of the proposed launch vehicle would in some situations induce a saturated, wet convective cloud or enhance an existing convective activity. Nevertheless, the effects would be limited to the general area of the launch site. The observed long lasting high concentrations of cloud condensation nuclei produced during and after a rocket launch may appreciably affect the frequency of occurrence and persistence of fogs and haze. In view of the high mission frequency proposed for the vehicle launches, a potential exists for a cumulative effect.

Lee, J.↗

A pristine eucrite-like gabbro from Descartes and its exotic kindred

A coarse-grained plagioclase-pyroxene gabbro (61224,6) with a cumulate texture suggestive of a slowly cooled plutonic rock was recovered from the 4-10 mm fraction of an Apollo 16 soil. The rock is uncommonly poor in feldspar and rich in Na for a lunar highlands lithology. Trace element analyses show extremely low siderophile element concentrations which confirm the pristine character indicated by the texture. The composition of 61224,6 is compared with those of 3 other pristine, exceptionally mafic, nonmare gabbros and of certain eucrites. 61224,6 and the three other gabbros have notable chemical differences but share relatively high ratios of Ti/Sm and Sc/Sm which suggest a possible genetic relationship. We conclude that 61224,6 represents a Na-rich cumulate from a layered intrusion within the highlands crust.

Marvin, U. B.↗

Modal studies of mesosiderites and related achondrites, including the new mesosiderite ALHA 77219

The Antarctic meteorite ALHA 77219 is found to be a new mesosiderite. It contains about 25% metal + troilite (+ rust) and the brecciated silicate portion is dominated by orthopyroxene (En 68-71). These features, together with the presence of olivine surrounded by coronas, and abundant tridymite + phosphate conform to the characteristics of mesosiderites. A comparison of the modal abundances of minerals in 77219 with modes of 20 mesosiderites, 14 howardites, six basaltic eucrites, three feldspar cumulate eucrites, and one orthopyroxene cumulate eucrite shows that there are major differences between mesosiderites and howardites. These differences are described in detail.

Prinz, M.↗

Comparative petrology and origin of Governador Valadares and other nakhlites

The Governador Valadares is a cumulate augite achondrite showing many petrographic and geochemical similarities to the other known nakhlites, Nakhla and Lafayette. However, subtle differences in minor-element composition and textures suggest that each nakhlite is unique and probably represents a separate meteorite fall. Cumulus clinopyroxene compositions (En39FS23WO38) suggest crystallization from a common silica-saturated (tholeiite-like) liquid. Intercumulus mesostasis material shows evidence for a two-stage cooling history (slow, followed by quenching) and may represent highly fractionated, foreign pore liquid filtered into present nakhlites by compaction of lower-level cumulates.

Berkley, J. L.↗

Fragmentation of ice by low velocity impact

Low-velocity impact experiments (0.14 to 1 km/s) carried out in polycrystalline water ice targets at 257 and 81 K reveal interactions which are assigned to four fragmentation classes: cratering, erosion, disruption, and total fragmentation. The specific kinetic energies for the transitions between these classes are found to be about one to two orders of magnitude below those for silicate rocks. The mass vs. cumulative number distribution of fragments in the experiments is described by a simple power law, similar to that observed in fragmented rocks both in the laboratory and in nature. The logarithmic slopes of cumulative number vs. fragment weight range from -0.9 to -1.8; they decrease with increasing projectile energy and are approximately independent of target temperature. The shapes of fragments resulting from erosion and disruption of ice targets are found to be significantly less spherical for 257 K targets than for 81 K targets. Fragment sphericity increases with increasing projectile energy at 257 K; however, no similar trend is observed for 81 K ice.

Lange, M. A.↗

Steady state volcanism - Evidence from eruption histories of polygenetic volcanoes

Cumulative volcano volume curves are presented as evidence for steady-state behavior at certain volcanoes and to develop a model of steady-state volcanism. A minimum criteria of five eruptions over a year was chosen to characterize a steady-state volcano. The subsequent model features a constant head of magmatic pressure from a reservoir supplied from depth, a sawtooth curve produced by the magma arrivals or discharge from the subvolcanic reservoir, large volume eruptions with long repose periods, and conditions of nonsupply of magma. The behavior of Mts. Etna, Nyamuragira, and Kilauea are described and show continuous levels of plasma output resulting in cumulative volume increases. Further discussion is made of steady-state andesitic and dacitic volcanism, long term patterns of the steady state, and magma storage, and the lack of a sufficient number of steady-state volcanoes in the world is taken as evidence that further data is required for a comprehensive model.

Wadge, G.↗

A Poisson process approximation for generalized K-5 confidence regions

One-sided confidence regions for continuous cumulative distribution functions are constructed using empirical cumulative distribution functions and the generalized Kolmogorov-Smirnov distance. The band width of such regions becomes narrower in the right or left tail of the distribution. To avoid tedious computation of confidence levels and critical values, an approximation based on the Poisson process is introduced. This aproximation provides a conservative confidence region; moreover, the approximation error decreases monotonically to 0 as sample size increases. Critical values necessary for implementation are given. Applications are made to the areas of risk analysis, investment modeling, reliability assessment, and analysis of fault tolerant systems.

Arsham, H.↗

Workshop on Magmatic Processes of Early Planetary Crusts: Magma Oceans and Stratiform Layered Intrusions

The significance of the lunar highland pristine cumulate samples were reevaluated with the aid of the additional insights provided by geologically constrained terrestrial investigations. This exercise involved a review of the state of knowledge about terrestrial and lunar cumulate rocks as well as an enumeration and reevaluation of the processes hypothesized to have been responsible for their formation, both classically and at present.

Walker, D.↗

Comments on the gamma-ray burst log N /greater than S/ log S point of Beurle et al

Statistical improbability is demonstrated for the Beurle et al (1981) determination of an isotropic cumulative burst rate of 7030 + 10,000 or - 6000/year, at a fluence of 8.47 x to the -9th/erg per sq cm, from their observation of two gamma-ray bursts. The difficulty identified is Beurle's assumption that the power law cumulative distribution function index equals one. Reconsideration of the Beurle observations is undertaken, and an alternative upper limit of the annual number of bursts at the fluence cited of less than 5400/year is proposed.

Jennings, M. C.↗

The magma ocean from the Fra Mauro shoreline - An overview of the Apollo 14 crust

Petrographic and mineralogical studies of coarse grained, polymineralic, texturally monominct igneous clasts from the Apollo 14 breccias show troctolite and troctolitic anorthosite to be the most abundant rock types. The second most abundant group consists of plagioclase cumulates with more evolved mineral compositions than the Mg-rich trend anorthosite cumulates. Coarse grained ilmenite gabbros and mineralogically evolved monzonoritic and granitic clasts are widespread in occurrence, but not abundant. The present data provide further support for widespread regional heterogeneities within the early lunar crust.

Hunter, R. H.↗

Optimization technique for improved microwave transmission from multi-solar power satellites

An optimization technique for generating antenna illumination tapers allows improved microwave transmission efficiencies from proposed solar power satellite (SPS) systems and minimizes sidelobe levels to meet preset environmental standards. The cumulative microwave power density levels from 50 optimized SPS systems are calculated at the centroids of each of the 3073 counties in the continental United States. These cumulative levels are compared with Environmental Protection Agency (EPA) measured levels of electromagnetic radiation in seven eastern cities. Effects of rectenna relocations upon the power levels/population exposure rates are also studied.

Arndt, G. D.↗

Impact cratering and spall failure at gabbro

Both hypervelocity impact and dynamic spall experiments were carried out on a series of well-indurated samples of gabbro. The impact experiments carried out with 0.04 to 0.2g, 5-6 km/sec projectiles produced deci-centimeter-sized craters and demonstrated crater efficiencies of 6/10 to the - 9 g/erg, and order of magnitude greater than in metal and some two to three times that of previous experiments on less strong igneous rocks. Most of the crater volume (some 60 to 80%) is due to spall failure. Distribution of cumulative fragment number, as a function of mass of fragments with masses greater than 0.1 gram yield values of b = d(log10N sub f)dlog10(m)of -0.5 to -0.6, where N sub f is the cumulate number of fragments and m is the mass of fragments. These values are in agreement or slightly higher than those obtained for less strong rocks and indicate that a large fraction of the ejectra resides in a few large fragments.

Lange, M. A.↗

Use of olivine and plagioclase saturation surfaces for the petrogenetic modeling of recrystallized basic plutonic systems

During petrogenetic studies of basic plutonic rocks, there are at least three major questions to be considered: (1) what were the relative proportions of cumulate crystals and intercumulus melt in a given sample? (2) what is the composition and variation in composition of the melts within the pluton? and (3) what is the original composition of the liquids, their source and evolution prior to the time of emplacement? Use of both saturation surfaces can place strong limits on the compositions of potential cumulate phases and intercumulus melts. Consideration of appropriate trace elements can indicate whether a sample is an orthocumulate, adcumulate or mesocumulate. Thus, when trace element and petrographic data are considered together with the saturation surfaces, it should be possible to begin to answer the three major questions given above, even for strongly recrystallized basic plutons.

Hanson, G. N.↗

Satellite remote sensing of total dry matter production in the Senegalese Sahel

Nine predominantly cloud-free NOAA-7 advanced very high resolution radiometer images were obtained during a three-month period during the 1981 rainy season in the Sahel of Senegal. The 0.55-0.68- and 0.725-1.10-micron channels were used to form the normalized difference green leaf density vegetation index and the 11.5-12.5-micron channel was used as a cloud mask for each of the nine images. Changes in the normalized difference values among the various dates were closely associated with precipitation events. Six of the images spanning an 8-week period were used to generate a cumulative integrated index. Ground biomas samplings in the 30,000 sq km study area were used to assign total dry biomass classes to the cumulative index.

Tucker, C. J.↗

Ancient crustal components in the Fra Mauro breccias

Texturally pristine clasts preserve primary petrographic relationships and mineral compositions, yielding insights into igneous processes of the early lunar crust that cannot be gained from highly shocked and brecciated 'chemically pristine' samples. The use of texture as a prime criterion allows for expansion of the data base derived solely from chemical criteria, and provides complementary data. Texturally pristine clasts from the Apollo 14 site studied here include anorthosite, troctolites, gabbronorites, and basalts. Alkali anorthosites are plagioclase orthocumulates and may form by flotation in Mg-suite plutons. Ferroan anorthosite was cataclastically deformed and metamorphosed to granulite facies. Troctolites include both 01 + Plg and 01 + En + Plg cumulates. Major and trace element analyses of two troctolites reveal 'eastern' geochemical affinities that contrast other 'western' troctolites. Gabbronorites are Pig + Plg + or - Sp cumulates whose parent magmas may range from high-Al to intermediate-Ti mare basalt. At least three varieties of mare basalt are found at Apollo 14: high-Al, low-Ti; low-Al, intermediate-Ti; and low-Al, Ti VHK basalt. VHK (Very High Potassium) basalt is a new variety indigenous to Apollo 14.

Shervais, J. W.↗

Lu-Hf constraints on the evolution of lunar basalts

It is shown that a cumulate-remelting model best explains the recently acquired data on the Lu-Hf systematics of lunar mare basalts. The model is constructed using Lu and Hf concentration data and is strengthened by Hf isotopic evidence of Unruh et al. (1984). It is shown that the similarity in MgO/FeO ratios and Cr2O3 content in high-Ti and low-Ti basalts are not important constraints on lunar basalt petrogenesis. The model demonstrates that even the very low Ti or green glass samples are remelting products of a cumulate formed after at least 80-90 percent of the lunar magma ocean had solidified. In the model, all the mare basalts and green glasses were derived from 100-150 km depth in the lunar mantle. The Lu-Hf systematics of KREEP basalts clearly indicate that they would be the final residual liquid of the lunar magma ocean.

Fujimaki, H.↗

Impact cratering and spall failure of gabbro

Both hypervelocity impact and dynamic spall experiments were carried out on a series of well-indurated samples of gabbro. The impact experiments carried out with 0.04 to 0.2 g, 5-6 km/sec projectiles produced deci-centimeter-sized craters and demonstrated crater efficiencies of 6/10 to the -9 g/erg, and order of magnitude greater than in metal and some two to three times that of previous experiments on less strong igneous rocks. Most of the crater volume (some 60 to 80 percent) is due to spall failure. Distribution of cumulative fragment number, as a function of mass of fragments with masses greater than 0.1 gram yield values of b = d(log10N sub f)dlog10(m) of -0.5 to -0.6, where N sub f is the cumulate number of fragments and m is the mass of fragments. These values are in agreement or slightly higher than those obtained for less strong rocks and indicate that a large fraction of the ejecta resides in a few large fragments.

Lange, M. A.↗