Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “compute in memory”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Turbulence modeling of free shear layers for high performance aircraft

In many flowfield computations, accuracy of the turbulence model employed is frequently a limiting factor in the overall accuracy of the computation. This is particularly true for complex flowfields such as those around full aircraft configurations. Free shear layers such as wakes, impinging jets (in V/STOL applications), and mixing layers over cavities are often part of these flowfields. Although flowfields have been computed for full aircraft, the memory and CPU requirements for these computations are often excessive. Additional computer power is required for multidisciplinary computations such as coupled fluid dynamics and conduction heat transfer analysis. Massively parallel computers show promise in alleviating this situation, and the purpose of this effort was to adapt and optimize CFD codes to these new machines. The objective of this research effort was to compute the flowfield and heat transfer for a two-dimensional jet impinging normally on a cool plate. The results of this research effort were summarized in an AIAA paper titled 'Parallel Implementation of the k-epsilon Turbulence Model'. Appendix A contains the full paper.

Sondak, Douglas↗
NASA NTRS2000

Optimization of Microelectronic Devices for Sensor Applications

The NASA/JPL goal to reduce payload in future space missions while increasing mission capability demands miniaturization of active and passive sensors, analytical instruments and communication systems among others. Currently, typical system requirements include the detection of particular spectral lines, associated data processing, and communication of the acquired data to other systems. Advances in lithography and deposition methods result in more advanced devices for space application, while the sub-micron resolution currently available opens a vast design space. Though an experimental exploration of this widening design space-searching for optimized performance by repeated fabrication efforts-is unfeasible, it does motivate the development of reliable software design tools. These tools necessitate models based on fundamental physics and mathematics of the device to accurately model effects such as diffraction and scattering in opto-electronic devices, or bandstructure and scattering in heterostructure devices. The software tools must have convenient turn-around times and interfaces that allow effective usage. The first issue is addressed by the application of high-performance computers and the second by the development of graphical user interfaces driven by properly developed data structures. These tools can then be integrated into an optimization environment, and with the available memory capacity and computational speed of high performance parallel platforms, simulation of optimized components can proceed. In this paper, specific applications of the electromagnetic modeling of infrared filtering, as well as heterostructure device design will be presented using genetic algorithm global optimization methods.

Cwik, Tom↗
NASA NTRS1996

Frequency scanning capaciflector for capacitively determining the material properties

A capaciflector sensor system scanned in frequency is used to detect the permittivity of the material of an object being sensed. A capaciflector sensor element, coupled to current-measuring voltage follower circuitry, is driven by a frequency swept oscillator and generates an output which corresponds to capacity as a function of the input frequency. This swept frequency information is fed into apparatus e.g. a digital computer for comparing the shape of the capacitance vs. frequency curve against characteristic capacitor vs. frequency curves for a variety of different materials which are stored, for example, in a digital memory of the computer or a database. Using a technique of pattern matching, a determination is made as to the identification of the material. Also, when desirable, the distance between the sensor and the object can be determined.

Campbell, Charles E.↗
DOE OSTI2023

A comparative study of two numerical approaches for solving Kim–Kim–Suzuki phase-field models

Among the standard multi-phase multi-component phase-field (PF) methods, the Kim–Kim–Suzuki (KKS) method has the advantage of decoupling interfacial energy from bulk energy and solving concentration as the conserved variable. There are two approaches to numerically solving a KKS method: the global solution approach (GSA) solves all variables in a global system simultaneously, and the local solution approach (LSA) solves phase concentrations locally using a Newton solver. This work compares the performance of LSA and GSA for solving four KKS models of increasing complexity with the finite element method using the MOOSE framework. The solution accuracy, degrees of freedom (DOFs), memory usage, and computational efficiency are compared. We find that GSA and LSA generate similar solutions, with a maximum difference of only 0.34%. For each model, LSA has a lower number of DOFs, utilizes less memory, and less wall time. Additionally, the savings of memory and wall time in LSA increase with increasing mesh density of the same model and are more pronounced in models with higher dimensionality and more nodes. However, GSA is easier to implement in existing codes and can better solve highly nonlinear systems by utilizing sophisticated solvers.

36 MATERIALS SCIENCE↗
DOE OSTI2020

The Computational Capacity of Mem-LRC Reservoirs

Reservoir computing has a emerged as a powerful tool in data-driven time series analysis. The possibility of utilizing hardware reservoirs as specialized co-processors has generated interest in the properties of electronic reservoirs, especially those based on memristors as the nonlinearity of these devices should translate to an improved nonlinear computational capacity of the reservoir. However, designing these reservoirs requires a detailed understanding of how memristive networks process information which has thus far been lacking. In this work, we derive an equation for general memristor-inductor-resistor-capacitor (MEM-LRC) reservoirs that includes all network and dynamical constraints explicitly. Utilizing this we undertake a study of the computational capacity of these reservoirs. We demonstrate that hardware reservoirs may be constructed with extensive memory capacity and that the presence of memristors enacts a tradeoff between memory capacity and nonlinear computational capacity. Here, using these principles, we design reservoirs to tackle problems in signal processing, paving the way for applying hardware reservoirs to high-dimensional spatiotemporal systems.

Circuits with memory↗
NASA NTRS2004

Performance of multi level error correction in binary holographic memory

At the Optical Computing Lab in the Jet Propulsion Laboratory (JPL) a binary holographic data storage system was designed and tested with methods of recording and retrieving the binary information. Levels of error correction were introduced to the system including pixel averaging, thresholding, and parity checks. Errors were artificially introduced into the binary holographic data storage system and were monitored as a function of the defect area fraction, which showed a strong influence on data integrity. Average area fractions exceeding one quarter of the bit area caused unrecoverable errors. Efficient use of the available data density was discussed. .

data storage↗
NASA NTRS1982

Highly versatile computer-controlled television detector system

A description is presented of a television detector system which has been designed to accommodate a wide range of applications. It is currently being developed for use in X-ray diffraction, X-ray astrophysics, and electron microscopy, but it is also well suited for astronomical observations. The image can be integrated in a large, high-speed memory system, in the memory of a computer system, or the target of the TV tube or CCD array. The detector system consists of a continuously scanned, intensified SIT vidicon with scan and processing electronics which generate a digital image that is integrated in the detector memory. Attention is given to details regarding the camera system, scan control and image processing electronics, the memory system, and aspects of detector performance.

Kalata, K.↗
DOE OSTI2026

ALD-Derived WO 3– x Leads to Nearly Wake-Up-Free Ferroelectric Hf 0.5 Zr 0.5 O 2 at Elevated Temperatures

Breaking the memory wall in advanced computing architectures will require complex 3D integration of emerging memory materials such as ferroelectrics─either within the back-end-of-line (BEOL) of CMOS front-end processes or through advanced 3D packaging technologies. Achieving this integration demands that memory materials exhibit high thermal resilience, with the capability to operate reliably at elevated temperatures, such as 125°C, due to the substantial heat generated by front-end transistors. However, silicon-compatible HfO 2 -based ferroelectrics tend to exhibit antiferroelectric-like behavior in this temperature range, accompanied by a more pronounced wake-up effect, posing significant challenges to their thermal reliability. Here, we report that by introducing a thin tungsten oxide (WO 3–x ) layer─known as an oxygen reservoir─and carefully tuning its oxygen content, ultrathin Hf 0.5 Zr 0.5 O 2 (5 nm) films can be made robust against the ferroelectric-to-antiferroelectric transition at elevated temperatures. This approach not only minimizes polarization loss in the pristine state but also effectively suppresses the wake-up effect, reducing the required wake-up cycles from 10 5 to only 10 at 125°C, a qualifying temperature for back-end memory integrated with front-end logic, as defined by the JEDEC standard. First-principles density functional theory (DFT) calculations reveal that WO 3 enhances the stability of the ferroelectric orthorhombic phase (o-phase) at elevated temperatures by increasing the tetragonal-to-orthorhombic phase energy gap and promoting favorable phonon mode evolution, thereby supporting o-phase formation under both thermodynamic and kinetic constraints.

36 MATERIALS SCIENCE↗
DOE OSTI2026

qSIEVE: Efficient qLDPC Memory via Systolic Movement in Atom Arrays

As quantum machines have scaled up in their number of qubits, significant research has turned towards increasing their fidelity with quantum error correction codes. Although promising results have been shown with the surface code, which only requires near-neighbor connections between qubits, the high qubit overhead of such local codes promises to be problematic. Consequently, recent work has explored non-local quantum LDPC (qLDPC) codes, which have good asymptotic encoding rates. Despite theoretical progress, hardware implementations of these codes have been a longstanding challenge. At the experimental level, demonstrations of movement based communication on atom arrays suggest this is a powerful new primitive to achieve non-local connectivity. Leveraging this, we present a protocol for implementing non-local qLDPC codes in hardware. Our protocol, qSIEVE, is a co-design of such codes with movement in atom arrays. qSIEVE defines a restricted family of qLDPC codes that can be implemented efficiently with systolic movement. We then quantify the utility of qSIEVE in the context of a complete fault tolerant architecture. We compare the cost of implementing benchmark programs in a standard, surface code only architecture and a mixed architecture where data is stored in qLDPC memory with qSIEVE and loaded to surface codes for computation.

Quantum error correction↗
DOE OSTI2025

SpecSims: A Scalable Speculative Tree-based Simulation Cloning Framework for Finite Memory Machines

Simulation cloning is a technique in which cloned simulations whose state spaces differ partially from their parent simulation due to intervening events are spawned at runtime and concurrently advanced. It is a powerful method to carry out what-if analysis by speculatively exploring and evaluating the impact of various permutations of intervening cascade of events. Due to the exponential growth in the number of possible clones even for a small number of distinct intervening events, the practical efficacy of the approach is often severely limited by the maximum available memory of the computing host. In this paper, we introduce a novel speculative simulation cloning framework that executes a simulation cloning campaign capable of efficiently exploring an exponentially large space of clone simulations created by permutation of intervening events under a finite memory constraint. We provide a theoretical analysis of the runtime characteristics of our proposed approach and highlight its novel advantages such as memory-aware and as-long-as-needed execution. Furthermore, in support of our analytical findings and to demonstrate its practical feasibility, we implement a prototype of the cloning framework on a shared memory system and report its performance characteristics in the context of a heat diffusion simulation, and a power grid simulation subject to cascading disruptions from geomagnetic disturbances.

Simulation framework↗
DOE OSTI2024

Developing And Scaling an OpenFOAM Model to Study Turbulent Flow in a HFIR Coolant Channel

Improving the understanding of how computational fluid dynamics (CFD) direct numerical simulations (DNS) of flows in the High Flux Isotope Reactor (HFIR) perform when run in parallel using the high performance computing (HPC) platform Summit at the Oak Ridge Leadership Computing Facility (OLCF) is of particular importance to boost the computational tools used to support HFIR conversion to low enriched fuel (LEU). Evaluation of scaling performance was driven by the increasing importance of graphics processing unit (GPU) usage in HPC, which is becoming the standard for modern supercomputers such as Summit. The desired results are to obtain a strong positive correlation between the computational resources dedicated to a problem and the relative speed-up of the simulation in comparison to a benchmark. This capability will allow substantially improvement in HFIR flow analytical capabilities, specifically when predicting turbulence properties at high Reynolds numbers. The study leverages previous simulation results performed with code PHASTA (finite element) on HPC platforms Cori (NERSC) and Theta (ALCF) [1] with computing options provided in the computing platform OpenFOAM (finite volume) at OLCF. Transitioning from PHASTA to OpenFOAM will (1) eliminate dependence on third-party software for mesh generation and manipulation, (2) reduce resource needs by employing modern architectures, and (3) build expertise for future modeling of HFIR-specific problems like heat transfer in involute geometry, entrance effects, flow structure in channel corners, and so on—all important issues when defining the available thermal margins in the transition to LEU. CPUs and GPUs differ significantly in their architecture and utilization, as discussed in the literature [2]. The most important differences are in the approach to computations and their memory. A single GPU contains a large quantity of cores, enabling it to perform with a much higher throughput than a CPU, but execution requires a different approach. GPU codes execute instructions using the Single-Instruction Multiple-Thread (SIMT) approach in which a single instruction is used for groups of threads called warps. A warp typically consists of 32 threads which must execute the same set of instructions, although on separate threads. Alternately, a CPU has far fewer cores that are much more flexible in their operation, excelling at quickly performing more complex serial computations. This is why GPUs have greater throughput when properly utilized. The second important difference is seen when comparing their memory spaces. Limited memory allocations and CPU–GPU communications cause a significant bottleneck in GPU-accelerated programs. Further study was required to properly take advantage of GPU resources. A comprehensive analysis of code performance and the model-specific features of turbulence constitutes the core of this work. In this study, a DNS simulation of HFIR channel turbulence was performed with the finite volume CFD code OpenFOAM v2112 and CUDA v11.0 on Red Hat Enterprise Linux v8.2. The OpenFOAM installation had AMGx integrated to enable GPU acceleration and utilizes the PETSc4FOAM library. The computational resources and the problem size were scaled on CPU and CPU + GPU architectures to gain a better understanding of the performance of a DNS problem on modern computing hardware. The study aimed to analyze the scaling of the code exclusively on CPUs and then to examine the scaling of the codes with GPU acceleration enabled. Scaling studies included CPU and GPU acceleration on a mesh of varying resolution to analyze the impact of problem size relative to computational resources. In the course of preparing the GPU configuration on Summit, mainly using the AMGX solvers, difficulties were encountered stemming from constant changes resulting from extensive ongoing development activities and the changing environment. This resulted in the inability to complete the GPU portion of the work. The code was compiled and tested, but production runs to assess acceleration were not performed because the used discretional compute time allocation expired as year-end approached. The Summit HPC platform is scheduled for decommissioning in 2024, making it unattractive for future use with Nvidia-based GPUs. Therefore, the work will be moved onto NERSC machines in FY24. An application was prepared and submitted, and sufficient node-hours were awarded to continue the research in the next calendar year. This report summarizes work performed thus far, which mostly focused on CPU OpenFOAM computing.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
NASA NTRS1993

Distributed simulation using a real-time shared memory network

The Advanced Control Technology Branch of the NASA Lewis Research Center performs research in the area of advanced digital controls for aeronautic and space propulsion systems. This work requires the real-time implementation of both control software and complex dynamical models of the propulsion system. We are implementing these systems in a distributed, multi-vendor computer environment. Therefore, a need exists for real-time communication and synchronization between the distributed multi-vendor computers. A shared memory network is a potential solution which offers several advantages over other real-time communication approaches. A candidate shared memory network was tested for basic performance. The shared memory network was then used to implement a distributed simulation of a ramjet engine. The accuracy and execution time of the distributed simulation was measured and compared to the performance of the non-partitioned simulation. The ease of partitioning the simulation, the minimal time required to develop for communication between the processors and the resulting execution time all indicate that the shared memory network is a real-time communication technique worthy of serious consideration.

Simon, Donald L.↗
NASA NTRSDate not supplied

Memory Optimizations for Sparse Linear Algebra on GPU Hardware

An effort to maximize memory bandwidth utilization for a sparse linear algebra kernel executing on NVIDIA® Tesla V100 and A100 Graphics Processing Units (GPUs) is described. The kernel consists of a block-sparse matrix-vector product and a series of forward/backward triangular solves. The computation is memory-bound and exhibits low arithmetic intensity. Along with a relatively small block size, the data layout poses a challenge to effectively utilize the available memory bandwidth on common GPU architectures. An earlier implementation using a warp to process a single row of the matrix was found to yield good memory performance on the V100 architecture. However, anew approach, which assigns a warp to six rows of the matrix, is proposed for the A100. In addition, two new features offered by the A100 architecture are explored.L2residency control enables a portion of theL2cache to be used for persistent data access, and the asynchronous copy instruction allows data to be loaded directly from main memory into shared memory. Demonstrations show that the new implementation improves memory bandwidth utilization from 71.5% to 81.2% of the peak available on theA100 architecture.

GPU↗
NASA NTRS2005

The Effect of Approximating Some Molecular Integrals in Coupled-Cluster Calculations: Fundamental Frequencies and Rovibrational Spectroscopic Constants of Cyclopropenylidene

The singles and doubles coupled-cluster method that includes a perturbational estimate of connected triple excitations, denoted CCSD(T), has been used, in conjunction with approximate integral techniques, to compute highly accurate rovibrational spectroscopic constants of cyclopropenylidene, C3H2. The approximate integral technique was proposed in 1994 by Rendell and Lee in order to avoid disk storage and input/output bottlenecks, and today it will also significantly aid in the development of algorithms for distributed memory, massively parallel computer architectures. It is shown in this study that use of approximate integrals does not impact the accuracy of CCSD(T) calculations. In addition, the most accurate spectroscopic data yet for C3H2 is presented based on a CCSD(T)/cc-pVQZ quartic force field that is modified to include the effects of core-valence electron correlation. Cyclopropenylidene is of great astronomical and astrobiological interest because it is the smallest aromatic ringed compound to be positively identified in the interstellar medium, and is thus involved in the prebiotic processing of carbon and hydrogen. The singles and doubles coupled-cluster method that includes a perturbational estimate of

Lee, Timothy J.↗
NASA NTRS1992

Crystal ball gazing

Over the last seven years, the CPU on my desk has increased speed by two orders of magnitude, from around 1 MIP to more than 100 MIPS; more important is that it is about as fast as any uniprocessor of any type available for any price, for compute bound problems. Memory on the system is also about 100 times as big, while disk is only about 10 times as big. Local network and I/O performance have increased greatly, though not quite at the same rate as processor speed. More important, I will argue, is that the CPU's address space is 64 bits, rather than 32 bits, allowing us to rethink some time honored presumptions. The Internet has gone from a few hundred machines to a million, and now have grown to span the entire globe, and wide area networks have now becoming commercial services. 'PC's' are now real computers, bringing what was top of the line computing capability to the masses only a few years behind the leading edge. So even a year or two from now, we can anticipate commonplace desktop machines running at speeds hundreds of MIPS, with main memories in the hundreds of megabytes to a gigabyte, able to draw millions of vectors/second, and all capable of some reasonable 3D graphics. And only a few years later, this will be the $1500 PC. So the 1990's certainly brings: 64 bit processors becoming standard; BIP/BFLOP class uniprocessors; large scale multiprocessors for special purpose applications; I/O as the most significant computer engineering problem; Hierarchical data servers in everyday use; routine access to archived data around the world; and what else? What do systems such as those we will have this decade imply to those building data analysis systems today? Many of the presumptions of the 1970's and 1980's need to be reexamined in the light of 1990's technology.

Gettys, Jim↗
DOE OSTI2024

The ECP SICM project: Managing complex memory hierarchies for exascale applications

The Exascale Computing Project (ECP)’s Simplified Interface to Complex Memories (SICM) effort focuses on developing universal interfaces for discovering, managing, and sharing data across complex memory hierarchies. These facilitate the exploitation of emerging memory technologies and support precise control over their various trade-offs such as high-bandwidth versus low-latency, persistent versus ephemeral, high-capacity versus low-capacity, and near-CPU versus near-GPU. SICM comprises three interrelated components: a low-level interface, a high-level interface, and a persistent-heap interface. The low-level SICM interface is intended for system and run-time developers as well as expert application developers who prefer full control of the memory objects used within their application. The high-level SICM interface builds upon the low-level interface, employing application-level profiling and analysis to optimize data management for complex memory hierarchies. The persistent-heap interface provides applications with a persistent memory allocator that can allocate custom C++ data structures in both block-storage and byte-addressable persistent memories.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1994

Simulation of Unsteady Combustion in a Ramjet Engine Using a Highly Parallel Computer

Combustion instability in ramjets is a complex phenomenon that involve nonlinear interaction between acoustic waves, vortex motion and unsteady heat release in the combustor. To numerically simulate this 3-D, transient phenomenon, enormous computer resources (time, memory and disk storage) are required. Although current generation vector supercomputers are capable of providing adequate resources for simulations of this nature, their high cost and limited availability, makes such machines less than satisfactory for routine use. The primary focus of this study is to assess the feasibility of using highly parallel computer systems as a cost-effective alternative for conducting such unsteady flow simulations. Towards this end, a large-eddy simulation model for combustion instability was implemented on the Intel iPSC/860 and a careful study was conducted to determine the benefits and the problems associated with the use of such machines for transient simulations. Details of this study along with the results obtained from the unsteady combustion simulations carried out on the iPSC/860 are discussed in this paper.

Menon, Suresh↗
NASA NTRS2004

Implementation of a Message Passing Interface into a Cloud-Resolving Model for Massively Parallel Computing

The capability for massively parallel programming (MPP) using a message passing interface (MPI) has been implemented into a three-dimensional version of the Goddard Cumulus Ensemble (GCE) model. The design for the MPP with MPI uses the concept of maintaining similar code structure between the whole domain as well as the portions after decomposition. Hence the model follows the same integration for single and multiple tasks (CPUs). Also, it provides for minimal changes to the original code, so it is easily modified and/or managed by the model developers and users who have little knowledge of MPP. The entire model domain could be sliced into one- or two-dimensional decomposition with a halo regime, which is overlaid on partial domains. The halo regime requires that no data be fetched across tasks during the computational stage, but it must be updated before the next computational stage through data exchange via MPI. For reproducible purposes, transposing data among tasks is required for spectral transform (Fast Fourier Transform, FFT), which is used in the anelastic version of the model for solving the pressure equation. The performance of the MPI-implemented codes (i.e., the compressible and anelastic versions) was tested on three different computing platforms. The major results are: 1) both versions have speedups of about 99% up to 256 tasks but not for 512 tasks; 2) the anelastic version has better speedup and efficiency because it requires more computations than that of the compressible version; 3) equal or approximately-equal numbers of slices between the x- and y- directions provide the fastest integration due to fewer data exchanges; and 4) one-dimensional slices in the x-direction result in the slowest integration due to the need for more memory relocation for computation.

Juang, Hann-Ming Henry↗