Instrumentation of a NASAP subroutine
NASAP program FORTRAN subroutine LOOPS for loop detection in circuit analysis, discussing automatic instrumentation process for computation time reduction
Mcnamee, L. P.↗
SEARCH · Engineering Papers
Results for “computation time”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The hybrid patched conic technique as applied to the lunar trajectory problem
Hybrid patched conic technique as iterative procedure for generating translunar and transearth trajectories emphasizing computing time saving
Escobal, P. R.↗
The efficient calculation of the transport properties of a dilute gas to a prescribed accuracy
Dilute gas transport properties calculation, investigating numerical techniques to minimize computation time to prescribed accuracy
Ohara, H.↗
Performance evaluation system for inertial navigation equipment
Testing system studies inertial characteristics of gyroscopic devices. System consisting of instrument support package, dynamic test table, torque control electronics, and real-time computer evaluates performance of prototype gyroscopic strapdown units in inertial-grade attitude-reference systems. System is applicable to commercial aircraft.
Mc Kern, R. A.↗
A real-time space station dynamics and control system simulation
Real time computer hardware simulation for investigation of space station dynamics and control problems
Grantham, C.↗
Trajectory optimization techniques in chemical reaction engineering. I - Boundary condition iteration methods
Boundary condition iteration methods in chemical process plant optimal design and control, considering simplicity and ease of programming, computation time and storage requirements
Coull, J.↗
Ultrasonic measurement of thin layers
Pulse echo ultrasonic measurement of thin film layer between thick media, using real time computation
Lees, S.↗
Accelerated procedures for the solution of discret e Markov control problems
Accelerated procedures for Markov chain model optimal control problems solution with computation time advantage over usual dynamic programming
Kleinman, A. J.↗
Evaluating foam heterogeneity
New analytical tool is available to calculate the degree of foam heterogeneity based on the measurement of gas diffusivity values. Diffusion characteristics of plastic foam are described by a system of differential equations based on conventional diffusion theory. This approach saves research and computation time in studying mass or heat diffusion problems.
Liou, D. W.↗
Preprocessing of multispectral data and simulation of ERTS data channels to make computer terrain maps of a Yellowstone National Park test site
The possibility of improving the accuracy of terrain classification by preprocessing spectral data was investigated. Terrain maps were made using the following techniques: 1) preprocessing by scan angle function transformation, using the computer-selected best set of three channels; and 2) preprocessing by ratio transformation, using the specified ERTS data channels, simulated by fitting the spectral response of each of the 12 data channels to the ERTS channels by a set of weighting coefficients. By using a simple technique during printout, the maps were produced in color. The normalized scan angle function transformation resulted in the most accurate classification. The best ratio transformation for the Yellowstone Park data was the ratio of each channel to the sum of all channels. A supervised training program involving maximum likelihood decision for selecting the best spectrometer channels and similar techniques for digitizing the data of the analog magnetic tapes were used. Cloud shadows were recognized in addition to eight classes of terrain. Preprocessing of data resulted in more accurate maps, required fewer training areas (hence less preparation and computer time), and enabled much of the area formerly classified as shadow to be reclassified according to actual terrain type.
Smedes, H. W.↗
Operational procedure for computer program for design point characteristics of a compressed-air generator with through-flow combustor for V/STOL applications
The computer program described in this report calculates the design-point characteristics of a compressed-air generator for use in V/STOL applications such as systems with a tip-turbine-driven lift fan. The program computes the dimensions and mass, as well as the thermodynamic performance of a model air generator configuration which involves a straight through-flow combustor. Physical and thermodynamic characteristics of the air generator components are also given. The program was written in FORTRAN IV language. Provision has been made so that the program will accept input values in either SI units or U.S. customary units. Each air generator design-point calculation requires about 1.5 seconds of 7094 computer time for execution.
Krebs, R. P.↗
A method for star vector determination from alignment optical telescope sighting
A method is described for determining the measured star vector in LM body coordinates when the measurement data consist of a spiral measurement, a cusor measurement, and a time associated with each measurement. The method is defined from alignment optical telescope (AOT) sightings from the LM on the lunar surface. This formulation will be coded into the real-time computer complex off-line AOT and gravity (AOT+G) bench program, the Gravity-Optics LM Attitude and Position (GOLAP) program.
Crigler, S. W.↗
Comparison of the radiation flux profiles and spectral detail from three detailed nongray radiation models at conditions representative of hypervelocity earth entry
The radiation models were compared on the basis of the approaches used for the transport calculations and absorption coefficients and of results obtained for the radiation flux profiles and spectral distributions. The calculated results were for shock layer conditions representative of manned earth reentry from an interplanetary mission. The three models are RATRAP, RADICAL, and MDAC. The results show that significant differences exist in the radiation flux computed by the three models. The RADICAL model was found to depend on fewer approximations, to include more detail, and to require less computer time than the other models.
Suttles, J. T.↗
Classical eight- and lower-order Runge-Kutta-Nystroem formulas with stepsize control for special second-order differential equations
The formulas include a stepsize control procedure, based on a complete coverage of the leading term of the truncation error in x. The formulas require fewer evaluations per stop than other Runge-Kutta-Nystrom formulas if the latter are operated by using the standard procedure for stepsize control. An example is presented. With results being of the same accuracy, Runge-Kutta-Nystrom formulas discussed save 50 percent or more computer time compared with other Runge-Kutta-Nystrom formulas.
Fehlberg, E.↗
The DOPEX Code: an Application of the Method of Steepest Descent to Laminated-Shield-Weight Optimization with Several Constraints
A two- or three-constraint, two-dimensional radiation shield weight optimization procedure and a computer program, DOPEX, is described. The DOPEX code uses the steepest descent method to alter a set of initial (input) thicknesses for a shield configuration to achieve a minimum weight while simultaneously satisfying dose constaints. The code assumes an exponential dose-shield thickness relation with parameters specified by the user. The code also assumes that dose rates in each principal direction are dependent only on thicknesses in that direction. Code input instructions, FORTRAN 4 listing, and a sample problem are given. Typical computer time required to optimize a seven-layer shield is about 0.1 minute on an IBM 7094-2.
Lahti, G. P.↗
An efficient algorithm using matrix methods to solve wind tunnel force-balance equations
An iterative procedure applying matrix methods to accomplish an efficient algorithm for automatic computer reduction of wind-tunnel force-balance data has been developed. Balance equations are expressed in a matrix form that is convenient for storing balance sensitivities and interaction coefficient values for online or offline batch data reduction. The convergence of the iterative values to a unique solution of this system of equations is investigated, and it is shown that for balances which satisfy the criteria discussed, this type of solution does occur. Methods for making sensitivity adjustments and initial load effect considerations in wind-tunnel applications are also discussed, and the logic for determining the convergence accuracy limits for the iterative solution is given. This more efficient data reduction program is compared with the technique presently in use at the NASA Langley Research Center, and computational times on the order of one-third or less are demonstrated by use of this new program.
Smith, D. L.↗
A computer program for the calculation of laminar and turbulent boundary layer flows
The results are presented of a study to produce a computer program to calculate laminar and turbulent boundary layer flows. The program is capable of calculating the following types of flow: (1) incompressible or compressible, (2) two dimensional or axisymmetric, and (3) flows with significant transverse curvature. Also, the program can handle a large variety of boundary conditions, such as blowing or suction, arbitrary temperature distributions and arbitrary wall heat fluxes. The program has been specialized to the calculation of equilibrium air flows and all of the thermodynamic and transport properties used are for air. For the turbulent transport properties, the eddy viscosity approach has been used. Although the eddy viscosity models are semi-empirical, the model employed in the program has corrections for pressure gradients, suction and blowing and compressibility. The basic method of approach is to put the equations of motion into a finite difference form and then solve them by use of a digital computer. The program is written in FORTRAN 4 and requires small amounts of computer time on most scientific machines. For example, most laminar flows can be calculated in less than one minute of machine time, while turbulent flows usually require three or four minutes.
Dwyer, H. A.↗
Assessment of advances in structural analysis for space shuttle
The latest technology for structural analysis in relation to the design tasks that lie ahead for the space shuttle is reviewed. For shell-of-revolution structures, the analysis can be formulated as a one-dimensional problem which is readily solved by using finite-difference or numerical-integration techniques. For more general asymmetric shells, a two-dimensional formulation is required. However, the governing equations are readily formulated and are amenable to solution by finite-difference techniques. For a completely general structural arrangement, such as structural frameworks, recourse is usually made to discretized formulations using finite elements. Of course, the finite-element programs could be used for shell structures, but at a loss in accuracy and increase in computer time compared with the special purpose programs.
Dixon, S. C.↗