Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “complex simulations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Hardware verification of distributed/adaptive control

Adaptive control techniques are studied for their future application to the control of large space structures, where uncertain or changing parameters may destabilize standard control system designs. The approach used is to examine an extended Kalman filter estimator, in which the state vector is augmented with the unknown parameters. The associated Riccatti equation is linearized about the case of exact knowledge of the parameters. By assuming that parameter variations occur slowly, the filter complexity is reduced further yet. Simulations on a two degree-of-freedom oscillator demonstrate the parameter-tracking capability of the filter, and an implementation on the JPL Flexible Beam Facility using an incorrect model shows the adaptive filter/optimal control to be stable where a standard Kalman filter/optimal control design is unstable.

Eldred, D. B.↗

Tunnel display for four-dimensional fixed-wing aircraft approaches

The present evaluation of a computer-generated perspective tunnel display for four-dimensional fixed wing aircraft landing approaches gives attention to the development and performance assessment of superimposed predictor symbology. Simulator tests indicate that a complex perspective vehicle symbol yields a decrease in bank angle activity, by comparison to a flat predictor cross, while yielding larger lateral and vertical deviations in most cases. The perspective vehicle symbol motions are successful in forward velocity control without affecting path-following performance. The perspective vehicle symbol's advantage over the flat predictor cross is nevertheless marginal. While the tunnel display used yields satisfactory response in the lateral control axis, the vertical axis lacks sensitivity to vertical path angle variations.

Grunwald, A. J.↗

Airborne antenna radiation pattern code user's manual

The use of a newly developed computer code to analyze the radiation patterns of antennas mounted on a ellipsoid and in the presence of a set of finite flat plates is described. It is shown how the code allows the user to simulate a wide variety of complex electromagnetic radiation problems using the ellipsoid/plates model. The code has the capacity of calculating radiation patterns around an arbitrary conical cut specified by the user. The organization of the code, definition of input and output data, and numerous practical examples are also presented. The analysis is based on the Uniform Geometrical Theory of Diffraction (UTD), and most of the computed patterns are compared with experimental results to show the accuracy of this solution.

Burnside, Walter D.↗

Computer Simulation For Multilevel Optimization Of Design

New simulator for multilevel optimization of complex hierarchical systems reduces cost of analysis in experimentation with multilevel design-optimization algorithms. Computer program mimics qualitative behavior and data couplings that occur among subsystems of complex engineering system, such as car, aircraft, or building. Eliminates engineering analyses in subsystems by replacing them with judiciously-chosen analytical functions. Serves as tool for development of strategy for multilevel optimization of design.

Padula, Sharon L.↗

Real-time optical correlator using computer-generated holographic filter on a liquid crystal light valve

Limitations associated with the binary phase-only filter often used in optical correlators are presently circumvented in the writing of complex-valued data on a gray-scale spatial light modulator through the use of a computer-generated hologram (CGH) algorithm. The CGH encodes complex-valued data into nonnegative real CGH data in such a way that it may be encoded in any of the available gray-scale spatial light modulators. A CdS liquid-crystal light valve is used for the complex-valued CGH encoding; computer simulations and experimental results are compared, and the use of such a CGH filter as the synapse hologram in a holographic optical neural net is discussed.

Chao, Tien-Hsin↗

Ultrasonic frequency selection for aqueous fine cleaning

A study was conducted to evaluate ultrasonic cleaning systems for precision cleaning effectiveness for oxygen service hardware. This evaluation was specific for Rocketdyne Division of Rockwell Aerospace alloys and machining soils. Machining lubricants and hydraulic fluid were applied as soils to standardized complex test specimens designed to simulate typical hardware. The study consisted of tests which included 20, 25, 30, 40, 50, and 65 kHz ultrasonic cleaning systems. Two size categories of cleaning systems were evaluated, 3- to 10-gal laboratory size tanks and 35- to 320-gal industrial size tanks. The system properties of cavitation, frequency vs. cleaning effectiveness, the two types of transducers, and the power level of the system vs. size of the cleaning tank were investigated. The data obtained from this study was used to select the ultrasonic tanks for the aqueous fine clean facility installed at Rocketdyne.

Becker, Joann F.↗

Ultrasonic frequency selection for aqueous fine cleaning

A study was conducted to evaluate ultrasonic cleaning systems for precision cleaning effectiveness for oxygen service hardware. This evaluation was specific for Rocketdyne Div. of Rockwell Aerospace alloys and machining soils. Machining lubricants and hydraulic fluid were applied as soils to standardized complex test specimens designed to simulate typical hardware. The study consisted of tests which included 20, 25, 30, 40, 50, and 65 kHz ultrasonic cleaning systems. Two size categories of cleaning systems were evaluated, 3- to 10-gal laboratory size tanks and 35- to 320-gal industrial size tanks. The system properties of cavitation; frequency vs. cleaning effectiveness; the two types of transducers; and the power level of the system vs. size of the cleaning tank were investigated. The data obtained from this study was used to select the ultrasonic tanks for the aqueous fine clean facility installed at Rocketdyne.

Becker, Joann F.↗

Multigrid Computations of 3-D Incompressible Internal and External Viscous Rotating Flows

This report presents multigrid methods for solving the 3-D incompressible viscous rotating flows in a NASA low-speed centrifugal compressor and a marine propeller 4119. Numerical formulations are given in both the rotating reference frame and the absolute frame. Comparisons are made for the accuracy, efficiency, and robustness between the steady-state scheme and the time-accurate scheme for simulating viscous rotating flows for complex internal and external flow applications. Prospects for further increase in efficiency and accuracy of unsteady time-accurate computations are discussed.

Sheng, Chunhua↗

Application of the ENS3DAE Euler/Navier-Stokes Aeroelastic method

This paper discusses recent applications of the ENS3DAE computational aeroelasticity method. In particular, it describes aeroelastic and unsteady aerodynamics calculations performed on wings with trailing edge control surfaces. These simulations include the investigation of control reversal for a structurally flexible wing with a deflected control surface, and a static and dynamic analysis of a rigid wing with an oscillating control surface. The two sets of calculations were performed independently on different wings using different grid topologies. The control reversal simulation represents an inviscid Euler static aeroelastic analysis of a thin wing with a rectangular planform. The geometry of this wing makes it suitable for computations using more approximate, inviscid aerodynamics methods. Thus, the results of the present Euler computations are compared with numerical data generated by a validated computational aeroelasticity code which uses a simpler aerodynamic formulation. The second illustrated case involves the simulation of a significantly more complex flowfield and the static and dynamic analyses of this geometry were performed using the viscous Navier-Stokes equation option in ENS3DAE. Results of both the steady and unsteady calculations on this wing are compared with existing experimental data.

Schuster, David M.↗

Comparison Analysis Between Nevada and TSS Using a Jet Engine Exhaust Nozzle Test Rig

Thermal analysis in both simple and complex models can require calculating the propagation of radiant energy to and from multiple surfaces. This can be accomplished through simple estimation techniques or complex computationally intense computer modeling simulations. Currently there are a variety of computer analysis techniques used to simulate the propagation of radiant energy, each having advantages and disadvantages. The major objective of this effort was to compare two ray tracing radiation propagation analysis programs (NEVADA and TSS) Net Energy Verification and Determination Analyzer and Thermal Synthesizer System with experimental data. Results from a non-flowing, electrically heated test rig was used to verify the calculated radiant energy propagation from a nozzle geometry that represents an aircraft propulsion nozzle system. In general the programs produced comparable overall results, and results slightly higher then the experimental data. Upon inspection of individual radiation interchange factors, differences were evident and would have been magnified if a more radical model temperature profile was analyzed. Bidirectional reflectivity data (BRDF) was not used do to modeling limitations in TSS. For code comparison purposes, this nozzle geometry represents only one case for one set of analysis conditions. Since each computer code has advantages and disadvantages bases on scope, requirements, and desired accuracy, the usefulness of this single case study may be limiting.

Baumeister, Joseph F.↗

Neural Network Prediction of Failure of Damaged Composite Pressure Vessels from Strain Field Data Acquired by a Computer Vision Method

This effort used a new and novel method of acquiring strains called Sub-pixel Digital Video Image Correlation (SDVIC) on impact damaged Kevlar/epoxy filament wound pressure vessels during a proof test. To predict the burst pressure, the hoop strain field distribution around the impact location from three vessels was used to train a neural network. The network was then tested on additional pressure vessels. Several variations on the network were tried. The best results were obtained using a single hidden layer. SDVIC is a fill-field non-contact computer vision technique which provides in-plane deformation and strain data over a load differential. This method was used to determine hoop and axial displacements, hoop and axial linear strains, the in-plane shear strains and rotations in the regions surrounding impact sites in filament wound pressure vessels (FWPV) during proof loading by internal pressurization. The relationship between these deformation measurement values and the remaining life of the pressure vessels, however, requires a complex theoretical model or numerical simulation. Both of these techniques are time consuming and complicated. Previous results using neural network methods had been successful in predicting the burst pressure for graphite/epoxy pressure vessels based upon acoustic emission (AE) measurements in similar tests. The neural network associates the character of the AE amplitude distribution, which depends upon the extent of impact damage, with the burst pressure. Similarly, higher amounts of impact damage are theorized to cause a higher amount of strain concentration in the damage effected zone at a given pressure and result in lower burst pressures. This relationship suggests that a neural network might be able to find an empirical relationship between the SDVIC strain field data and the burst pressure, analogous to the AE method, with greater speed and simplicity than theoretical or finite element modeling. The process of testing SDVIC neural network analysis and some encouraging preliminary results are presented in this paper. Details are given concerning the processing of SDVIC output data such that it may be used as back propagation neural network (BPNN) input data. The software written to perform this processing and the BPNN algorithm are also discussed. It will be shown that, with limited training, test results indicate an average error in burst pressure prediction of approximately six percent,

Russell, Samuel S.↗

Technologies for Visualization in Computational Aerosciences

State-of-the-art research in computational aerosciences produces' complex, time-dependent datasets. Simulations can also be multidisciplinary in nature, coupling two or more physical disciplines such as fluid dynamics, structural dynamics, thermodynamics, and acoustics. Many diverse technologies are necessary for visualizing computational aerosciences simulations. This paper describes these technologies and how they contribute to building effective tools for use by domain scientists. These technologies include data management, distributed environments, advanced user interfaces, rapid prototyping environments, parallel computation, and methods to visualize the scalar and vector fields associated with computational aerosciences datasets.

Miceli, Kristina D.↗

P1 Nonconforming Finite Element Method for the Solution of Radiation Transport Problems

The simulation of radiation transport in the optically thick flux-limited diffusion regime has been identified as one of the most time-consuming tasks within large simulation codes. Due to multimaterial complex geometry, the radiation transport system must often be solved on unstructured grids. In this paper, we investigate the behavior and the benefits of the unstructured P(sub 1) nonconforming finite element method, which has proven to be flexible and effective on related transport problems, in solving unsteady implicit nonlinear radiation diffusion problems using Newton and Picard linearization methods. Key words. nonconforrning finite elements, radiation transport, inexact Newton linearization, multigrid preconditioning

Kang, Kab S.↗

Aerocapture Guidance Algorithm Comparison Campaign

The aerocapture is a promising technique for the future human interplanetary missions. The Mars Sample Return was initially based on an insertion by aerocapture. A CNES orbiter Mars Premier was developed to demonstrate this concept. Mainly due to budget constraints, the aerocapture was cancelled for the French orbiter. A lot of studies were achieved during the three last years to develop and test different guidance algorithms (APC, EC, TPC, NPC). This work was shared between CNES and NASA, with a fruitful joint working group. To finish this study an evaluation campaign has been performed to test the different algorithms. The objective was to assess the robustness, accuracy, capability to limit the load, and the complexity of each algorithm. A simulation campaign has been specified and performed by CNES, with a similar activity on the NASA side to confirm the CNES results. This evaluation has demonstrated that the numerical guidance principal is not competitive compared to the analytical concepts. All the other algorithms are well adapted to guaranty the success of the aerocapture. The TPC appears to be the more robust, the APC the more accurate, and the EC appears to be a good compromise.

Rousseau, Stephane↗

Progressive Response Surfaces

Response surface functions are often used as simple and inexpensive replacements for computationally expensive computer models that simulate the behavior of a complex system over some parameter space. Progressive response surfaces are ones that are built up progressively as global information is added from new sample points in the parameter space. As the response surfaces are globally upgraded based on new information, heuristic indications of the convergence of the response surface approximation to the exact (fitted) function can be inferred. Sampling points can be incrementally added in a structured fashion, or in an unstructured fashion. Whatever the approach, at least in early stages of sampling it is usually desirable to sample the entire parameter space uniformly. At later stages of sampling, depending on the nature of the quantity being resolved, it may be desirable to continue sampling uniformly over the entire parameter space (Progressive response surfaces), or to switch to a focusing/economizing strategy of preferentially sampling certain regions of the parameter space based on information gained in early stages of sampling (Adaptive response surfaces). Here we consider Progressive response surfaces where a balanced indication of global response over the parameter space is desired.We use a variant of Moving Least Squares to fit and interpolate structured and unstructured point sets over the parameter space. On a 2-D test problem we compare response surface accuracy for three incremental sampling methods: Progressive Lattice Sampling; Simple-Random Monte Carlo; and Halton Quasi-Monte-Carlo sequences. We are ultimately after a system for constructing efficiently upgradable response surface approximations with reliable error estimates.

Romero, V. J.↗

ASK Magazine; No. 21

THIS ISSUE FEATURES A VISUAL DEPICTION OF THE ACADEMY of Program and Project Leadership (APPL). I imagine a variety of initial reactions to the drawing. One might be, "What is a cartoon doing in a magazine about project management?" Or perhaps, "Wow, nice colors-and fun." Another may be to closely search the image for signs, symbols and meaning. Still another, to read a new level of innovation and creativity into the picture. Undoubtedly, some readers will raise questions about the cost. Of course, any reaction is a sign of engagement. The stronger, the more energized the emotional and cognitive processing, the better. It is a sign of attention and interaction. For I've heard it said, "You only need to worry if they don t care one way or the other." So what is the point of the picture? To stimulate interest, raise questions, promote discussion, and maybe raise a smile.. .That, at least, was my initial reaction when I was introduced to the work of Nancy Hegedus, who helps to create these drawings for Root Learning Inc. At the NASA PM Conference, I was first shown the work Nancy had been doing with the help of Goddard s Knowledge Management Architect, Dr. Ed Rogers. I was immediately drawn into the power of visualization as a tool for more effective learning, communicating, and conveying complex knowledge concepts. We need new tools in today s world, where information and data overwhelms by sheer volume. There are articles, pamphlets, communications, and white papers-all aiming to convince and influence. Reactions to these tend to be either avoidance or mind-numbing, heavy-eyed consent; the message never registers or enters the soul. That s one of the reasons that APPL s Knowledge Sharing Initiative (KSI) has turned to storytelling as a memorable way of transfer- ring knowledge, inspiring imitation of best practices, and spurring reflection. ASK Magazine s recent fourth birthday marks an important milestone in APPL s continuing quest to provide ongoing support to project managers and to promote mission success. And similar to storytelling, the power of visualization is receiving increasing attention in recent years as a way to stimulate engagement. Pictures and visual graphs are viewed as one of the most effective ways for displaying, describing, and generating discussion about quantitative and technically complex information. Prototypes, models, and simulations are considered essential for stimulating innovation through open and engaging discussions. There has also been extensive writing on the use of visual graphics, pictures, and cartoons to facilitate memory, creativity, openness, attention-and even well-being. For many of these reasons, I am excited to have a colorful visual depiction of the APPL world included in ASK. Without the addition of text or slides, the intent is to invite people into the world of the APPL mission-as well as its products, services, customers, and partners- in a fun and engaging manner. As project leaders strive to find ways to encourage engagement, learning, and transmission of knowledge, traditional technologies are proving to be as valuable as modern technologies. (But for those who want more information in the form of texts and slide presentations, we certainly have an abundance of those as well.)

Laufer, Alexander↗