Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cascade”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

The CHIMERAS project: design framework for the Collisionless HIgh-beta Magnetized Experiment Researching Astrophysical Systems

From the near-Earth solar wind to the intracluster medium of galaxy clusters, collisionless, high-beta, magnetized plasmas pervade our universe. Energy and momentum transport from large-scale fields and flows to small-scale motions of plasma particles is ubiquitous in these systems, but a full picture of the underlying physical mechanisms remains elusive. The transfer is often mediated by a turbulent cascade of Alfvénic fluctuations as well as a variety of kinetic instabilities; these processes tend to be multi-scale and/or multi-dimensional, which makes them difficult to study using spacecraft missions and numerical simulations alone. Meanwhile, existing laboratory devices struggle to produce the collisionless, high ion beta (β i ≳ 1), magnetized plasmas across the range of scales necessary to address these problems. As envisioned in recent community planning documents, it is therefore important to build a next generation laboratory facility to create a β i ≳ 1, collisionless, magnetized plasma in the laboratory for the first time. A working group has been formed and is actively defining the necessary technical requirements to move the facility towards a construction-ready state. Recent progress includes the development of target parameters and diagnostic requirements as well as the identification of a need for source-target device geometry. As the working group is already leading to new synergies across the community, we anticipate a broad community of users funded by a variety of federal agencies (including National Aeronautics and Space Administration, Department of Energy and National Science Foundation) to make copious use of the future facility.

astrophysical plasmas↗
DOE OSTI2025

Anisotropic Heating and Parallel Heat Flux in Electron-only Magnetic Reconnection with Intense Guide Fields

Electron-only reconnection (E-REC) is a process recently observed in the Earth’s magnetosheath, where magnetic reconnection occurs at electron kinetic scales, and ions do not couple to the reconnection process. Electron-only reconnection is likely to have a significant impact on the energy conversion and dissipation of turbulence cascades at kinetic scales in some settings. This paper investigates E-REC under different intensities of strong guide fields (the ratio between the guide field and the in-plane asymptotic field strength is 5, 10 and 20, respectively) via two-dimensional fully kinetic particle-in-cell simulations, focusing on electron heating. The simulations are initialized with a force-free current sheet equilibrium under various intensities of strong guide fields. Similarly to previous experimental studies, electron temperature anisotropy along separatrices is observed, which is found to be mainly caused by the variations of parallel temperature. Both regions of anisotropy and parallel temperature increase/decrease along separatrices become thinner with increasing guide fields. Besides, we find a transition from a quadrupolar to a hexapolar (six-polar) to an octopolar (eight-polar) structure in temperature anisotropy and parallel temperature as the guide field intensifies. Non-Maxwellian electron velocity distribution functions (EVDFs) at different locations in the three simulations are observed. Our results show that parallel electron velocity varies notably with different guide field intensities and finite parallel electron heat flux density is observed. The three simulations exhibit features of the Chew–Goldberger–Low theory, with the level of consistency increasing as the guide field strength increases. This explains the electron parallel temperature variations and the shape of the EVDFs observed along the separatrices. This work may provide insights into the understanding of electron heating and parallel heat flux density in E-REC observed in the turbulent magnetosheath.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

A two-fluid solar-wind model with intermittent Alfvénic turbulence

In one of the leading theories for the origin of the solar wind, photospheric motions launch Alfvén waves (AWs) that propagate along open magnetic-field lines through the solar atmosphere and into the solar wind. The radial variation in the Alfvén speed causes some of the AWs to reflect, and counter-propagating AWs subsequently interact to produce Alfveńic turbulence, in which AW energy cascades from long wavelengths to short wavelengths and dissipates, heating the plasma. In this paper we develop a one-dimensional two-fluid solar-wind model that includes Alfvénic turbulence, proton temperature anisotropy and a novel method for apportioning the turbulent heating rate between parallel proton heating, perpendicular proton heating and electron heating. We employ a turbulence model that accounts for recent observations from NASA’s Parker Solar Probe, which find that AW fluctuations in the near-Sun solar wind are intermittent and less anisotropic than in previous models of anisotropic magnetohydrodynamic turbulence. Our solar-wind model reproduces a wide range of remote observations of the corona and in-situ measurements of the solar wind, and our turbulent heating model consists of analytic equations that could be usefully incorporated into other solar-wind models and numerical models of more distant astrophysical plasmas.

astrophysical plasmas↗
DOE OSTI2020

Mechanistic Understanding and Rational Design of Quantum Dot/Mediator Interfaces for Efficient Photon Upconversion

The semiconductor-nanocrystal-sensitized, three-component upconversion system has made great strides over the past 5 years. The three components (i.e., triplet photosensitizer, mediator, and emitter) each play critical roles in determining the input and output photon energy and overall quantum efficiency (QE). The nanocrystal photosensitizer converts the absorbed photon into singlet excitons and then triplet excitons via intersystem crossing. The mediator accepts the triplet exciton via either direct Dexter-type triplet energy transfer (TET) or sequential charge transfer (CT) while extending the exciton lifetime. Through a second triplet energy-transfer step from the mediator to the emitter, the latter is populated in its lowest excited triplet state. Triplet–triplet annihilation (TTA) between two triplet emitters generates the emitter in its bright singlet state, which then emits the upconverted photon. Quantum dots (QD) have a tunable band gap, large extinction coefficient, and small singlet–triplet energy losses compared to metal–ligand charge-transfer complexes. This high triplet exciton yield makes QDs good candidates for photosensitizers. In terms of driving triplet energy transfer, the triplet energy of the mediator should be slightly lower than the triplet exciton energy of the QD sensitizer for a downhill energy landscape with minimal energy loss. The same energy cascade is also required for the transfer from the mediator to the emitter. Lastly, the triplet energy of the emitter must be slightly larger than one-half of its singlet energy to ensure that TTA is exothermic. Optimization of the sensitizer, mediator, and emitter will lead to an increase in the anti-Stokes shift and the total quantum efficiency. Evaluating each individual step’s efficiency and kinetics is necessary for the understanding of the limiting factors in existing systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Deep learning to generate in silico chemical property libraries and candidate molecules for small molecule identification in complex samples

Comprehensive and unambiguous identification of small molecules in complex samples will revolutionize our understanding of the role of metabolites in biological systems. Existing and emerging technologies have enabled measurement of chemical properties of molecules in complex mixtures and, in concert, are sensitive enough to resolve even stereoisomers. Despite these experimental advances, small molecule identification is inhibited by (i) chemical reference libraries (e.g. mass spectra, collision cross section, and other measurable property libraries) representing <1% of known molecules, limiting the number of possible identifications, and (ii) the lack of a method to generate candidate matches directly from experimental features (i.e. without a library). To this end, we developed a variational autoencoder (VAE) to learn a continuous numerical, or latent, representation of molecular structure to expand reference libraries for small molecule identification. We extended the VAE to include a chemical property decoder, trained as a multitask network, in order to shape the latent representation such that it assembles according to desired chemical properties. The approach is unique in its application to metabolomics and small molecule identification, with its focus on properties that can be obtained from experimental measurements (m/z, CCS) paired with its training paradigm, which involved a cascade of transfer learning iterations. First, molecular representation is learned from a large dataset of structures with m/z labels. Next, in silico property values are used to continue training, as experimental property data is limited. Finally, the network is further refined by being trained with the experimental data. This allows the network to learn as much as possible at each stage, enabling success with progressively smaller datasets without overfitting. Once trained, the network can be used to predict chemical properties directly from structure, as well as generate candidate structures with desired chemical properties. Our approach is orders of magnitude faster than first-principles simulation for CCS property prediction. Additionally, the ability to generate novel molecules along manifolds, defined by chemical property analogues, positions DarkChem as highly useful in a number of application areas, including metabolomics and small molecule identification, drug discovery and design, chemical forensics, and beyond.

Colby, Sean M.↗
DOE OSTI2023

Evolution of Highly Anisotropic Magnetism in the Titanium-Based Kagome Metals LnTi 3 Bi 4 (Ln: La···Gd 3+ , Eu 2+ , Yb 2+ )

Here, we present a family of titanium-based kagome metals of the form LnTi 3 Bi 4 (Ln: La···Gd 3+ , Eu 2+ , Yb 2+ ). Four previously unreported compounds are presented: YbTi 3 Bi 4 , GdTi 3 Bi 4 , NdTi 3 Bi 4 , and PrTi 3 Bi 4 . Single-crystal growth methods are provided alongside detailed magnetic and thermodynamic measurements across the entire series. The LnTi 3 Bi 4 family of compounds are orthorhombic (Fmmm), layered compounds that exhibit slightly distorted titanium-based kagome nets interwoven with zigzag lanthanide-based (Ln) chains. Crystals are easily exfoliated parallel to the kagome sheets, and angular resolved photoemission (ARPES) measurements highlight the intricacy of the electronic structure in these compounds. Density functional theory (DFT) and ARPES studies find Dirac points near the Fermi level, consistent with the kagome-derived band structure. The magnetic properties and the associated anisotropy emerge from the quasi-1D zigzag chains of Ln and impart a wide array of magnetic ground states ranging from anisotropic ferromagnetism to complex antiferromagnetism with a cascade of metamagnetic transitions. In conclusion, the combination of the kagome-based electronic structure and highly anisotropic Ln-based magnetism on an exfoliatable platform cements the LnTi 3 Bi 4 family as an interesting addition to the ever-expanding suite of kagome metals.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Discovery of TAK-981, a First-in-Class Inhibitor of SUMO-Activating Enzyme for the Treatment of Cancer

SUMOylation is a reversible post-translational modification that regulates protein function through covalent attachment of small ubiquitin-like modifier (SUMO) proteins. The process of SUMOylating proteins involves an enzymatic cascade, the first step of which entails the activation of a SUMO protein through an ATP-dependent process catalyzed by SUMO-activating enzyme (SAE). Here, we describe the identification of TAK-981, a mechanism-based inhibitor of SAE which forms a SUMO–TAK-981 adduct as the inhibitory species within the enzyme catalytic site. Optimization of selectivity against related enzymes as well as enhancement of mean residence time of the adduct were critical to the identification of compounds with potent cellular pathway inhibition and ultimately a prolonged pharmacodynamic effect and efficacy in preclinical tumor models, culminating in the identification of the clinical molecule TAK-981.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2021

Cryogenic Vibrationally Resolved Photoelectron Spectroscopy of OH–(H2O): Confirmation of Multidimensional Franck-Condon Simulation Results for the Transition State of the OH + H2O Reaction

We present a transition state spectroscopic study of the OH + H2O reaction using the experimental technique of cryogenic Negative Ion Photoelectron Spectroscopy (NIPES). The recorded NIPE spectrum at 193 nm exhibits multiple vibrational progressions that include excitations to the shared H atom antisymmetric stretching mode with an interval of 0.32 eV as well as other progressions, mainly involving the H bending and O…O symmetric stretching modes. The Vertical Detachment Energy (VDE) was measured at 3.53 eV, whereas an upper limit for the Adiabatic Detachment Energy (ADE) was estimated at 2.90 eV. These values are in excellent agreement with the theoretically computed values of 3.51 eV and 2.83 eV respectively, obtained at the CCSD(T)/aug-cc-pV5Z level of theory. The recorded NIPE spectrum is in very good agreement when compared to the one recently reported from four-dimensional Franck-Condon simulations, in which a similar spectral profile was predicted. Besides observing the ground state, a charge-transfer excited state in the form of [OH–(H2O)+] is identified with a relative energy of 1.39 eV, well matching the previous prediction of 1.36 eV. This work was supported by U.S. Department of Energy (DOE), Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences, and Biosciences, and performed using EMSL, a national scientific user facility sponsored by DOE’s Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory, which is operated by Battelle Memorial Institute for the DOE. The theoretical calculations were conducted on EMSL’s “Cascade” Supercomputer. This research also used resources of the National Energy Research Scientific Computing Center, which is supported by the Office of Science of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231.

Cao, Wenjin↗
DOE OSTI2021

Photoelectron Spectroscopy and Theoretical Study on Monosolvated Cyanate Analogue Clusters ECX-· Sol (ECX- = NCSe-, AsCSe- and AsCS-; Sol = H2O, CH3CN)

Six monosolvated cyanate analogue clusters ECX-?Sol (ECX– = NCSe-, AsCSe-, and AsCS-; Sol = H2O and CH3CN) were investigated using negative ion photoelectron spectroscopy (NIPES). NIPES experiments show that these clusters possess overall similar spectra compared to their respective isolated ECX- anions but shift to higher electron binding energy with solvent CH3CN stabilizing the excess electrons slightly more than H2O. For the ECX-·H2O series, vertical detachment energies and their increments relative to the bare species are measured to be 3.700 / 0.370, 3.085 / 0.425, 3.085 / 0.430 eV for NCSe-, AsCSe- and AsCS-, respectively, while the corresponding values in ECX-·CH3CN series are 3.835 / 0.505, 3.145 / 0.475, and 3.135 / 0.480 eV. Ab initio electronic structure calculations indicate the excess charges located at the terminal N and Se atoms in NCSe- and migrated to the central C atom in AsCSe- and AsCS-. For NCSe-, the solvation is driven by the interactions with the two negatively charged terminal ends, while for AsCSe- and AsCS-, the solvation revolves around the interactions with the central C atom, where all the excess negative charge is concentrated. Two nearly degenerate isomers for NCSe-·H2O are identified, one forming a single strong N…H-O hydrogen bond (HB) and the other featuring a bidentate HB with two hydroxyl H atoms pointing to N and Se ends. In contrast, the negative central C atom in AsCSe-/AsCS- allows the formation of a bifurcated HB with H2O. Similar effects are observed for the acetonitrile case, in which the three H atoms of methyl group interact with the two negatively charged terminal ends in NCSe-, while prefer binding to the central negative carbon atom in AsCSe-/AsCS-. The different binding motifs derived in this work may suggest distinctly different solvation properties in NCSe- versus AsCSe-/AsCS-, with the former anion leading to asymmetric solvation at the N end of the solute, while the latter species creating more ‘isotropic’ solvation around the central C equatorial plane. This work was supported by U.S. Department of Energy (DOE), Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences, and Biosciences, and performed using EMSL, a national scientific user facility sponsored by DOE’s Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory, which is operated by Battelle Memorial Institute for the DOE. The theoretical calculations were conducted on EMSL’s “Cascade” Supercomputer.

Yuan, Qinqin↗
DOE OSTI2021

Size and Stoichiometry Effects on the Reactivity of MoCy Nanoparticles Towards Ethylene

Molybdenum carbides are promising catalysts alternative to Pt-group metals for the hydrogenation of unsaturated hydrocarbons. Nanostructuring has been shown to be an efficient way to boost the catalytic activity of these materials with MoCy nanoparticles (NPs) exhibiting a good performance when encapsulated inside zeolites or dispersed on inert supports such as carbon or gold. In this work, we focus on a systematic DFT study of the interaction of MoCy NPs with ethylene (C 2 H 4 ), as a general and simple approach for examining binding and activation of C≡C bonds. Models for 14 NPs, with a Mo/C ratio in the 0.67 to 2.00 range, have been built following a cascade procedure. Several chemical descriptors, including the adsorption energy, structural NPs distortion, C≡C deformation, and C 2 H 4 attachment energy have been analyzed along with a meticulous geometric and electronic characterization of bare NPs and C2H4 binding. The present results show that 1:1 stoichiometric Mo 6 C 6 , Mo 12 C 12 , and Mo 24 C 24 , and the non-stochiometric Mo 4 C 6 , Mo 8 C 12 (MetCar), and Mo 14 C 13 (Nanocube) are excellent systems for the binding and activation of ethylene, exhibiting a much bigger reactivity than a bulk δ-MoC(001) surface with a similar Mo:C ratio. In addition, C 2 H 4 binding on the NPs with a Mo/C < 1.08 is advantageous since, apart from a rather large adsorption energy, implies low energy values for NPs deformation (from 0.00 to 0.31 eV), C≡C distortion (from 0.30 to 0.52 eV), and C 2 H 4 attachment (from -2.12 to -2.58 eV). These theoretical results point to the ideal MoCy size and composition for C 2 H 4 binding, providing a background for further experimental studies aimed at the preparation of MoCy NPs as hydrogenation catalysts.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Localized High Concentration Electrolyte and Its Effects on Polysulfide Structure in Solution

Lithium–sulfur batteries (LiSB) are a promising next-generation lithium energy storage technology that offers a multifold improvement over the traditional lithium-ion battery. However, the LiSB still faces the unresolved issue of the polysulfide shuttle effect. This phenomenon arises from the dissolution of sulfur intermediate reduction products into the electrolyte, which then causes a cascade of issues throughout the battery. Many mitigation strategies have been proposed to counteract this effect including the use of novel electrolyte compositions. Recently, there has been increased focus on the use of hydrofluorinated ethers as a major constituent of an electrolyte for lithium batteries. Previous studies have reported that the presence of these species create localized high concentration electrolytes (LHCE) which can have many advantages resulting in improved battery performance. Here, we report on how the inclusion of a hydrofluorinated ether BTFE (bis(2,2,2-trifluoroethyl) ether) modifies the general properties of a LiSB electrolyte and the structure of dissolved polysulfide species in the electrolyte. Here, we found that the inclusion of BTFE does not modify the primary solvation structure of Li + directly but actively participates in secondary solvation shells. With a high concentration of BTFE, the LHCE formation is observed by the presence of clusters of non-BTFE molecules. The structure of polysulfide species in solution was modified by the BTFE in the same way. Much of the primary solvation structure was kept, but the presence of BTFE increased polysulfide–polysulfide clustering. These results indicate that the polysulfide solubility will be limited due to the promotion of clustering.

25 ENERGY STORAGE↗
DOE OSTI2024

Resistance of Boron Nitride Nanotubes to Radiation-Induced Oxidation

We present unprecedented results on the damage thresholds and pathways for boron nitride nanotubes (BNNT) under the influence of energetic electrons in an oxidative gas environment, using an environmental aberration-corrected electron microscope over a range of oxygen pressures. We observe a damage cascade process that resists damage until a higher electron dose, compared with carbon nanotubes, initiating at defect-free BNNT sidewalls and proceeding through the conversion from crystalline nanotubes to amorphous boron nitride (BN), resisting oxidation throughout. We compare with prior results on the oxidation of carbon nanotubes and present a model that attributes the onset of damage in both cases to a physisorbed oxygen layer that reduces the threshold for damage onset. Surprisingly, increased temperatures offer protection against damage, as do electron dose rates that significantly exceed the oxygen dose rates, and our model attributes both effects to a physisorbed oxygen population.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Photoreactive Carbon Dioxide Capture by a Zirconium–Nanographene Metal–Organic Framework

Here, the mechanism of photochemical CO 2 reduction to formate by PCN-136, a Zr-based metal-organic framework (MOF) that incorporates light-harvesting nanographene ligands, has been investigated using steady-state and time-resolved spectroscopy and density functional theory (DFT) calculations. The catalysis was found to proceed via a "photoreactive capture" mechanism, where Zr-based nodes serve to capture CO 2 in the form of Zr- bicarbonates, while the nanographene ligands have a dual role of absorbing light and storing one-electron equivalents for catalysis. We also find that the process occurs via a "two-for-one" route, where a single photon initiates a cascade of electron/hydrogen atom transfers from the sacrificial donor to the CO 2 -bound MOF. The mechanistic findings obtained here illustrate several advantages of MOF-based architectures in molecular photocatalyst engineering and provide insights on ways to achieve high formate selectivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Microphase Separation in Polyelectrolyte Blends: Weak Segregation Theory and Relation to Nuclear "Pasta".

We develop the weak segregation theory of micro phase separation in stoichiometric blends of oppositely and weakly charged polyelectrolytes, which would be immiscible in the absence of charged units. Short-range repulsions between polycation and polyanion monomers induce the formation of oppositely charged domains, the size of which is controlled by their excess Coulomb energy. The diagram of blend morphologies is constructed in the framework of Leibler's mean-field approach and to account for fluctuations within the Brazovskii-Fredrickson-Helfand approximation. Phase behavior of the polyelectrolyte blends is fully analogous to that of neutral diblock copolymers. The mean-field analysis predicts that the order-disorder transition (ODT) is second order for the symmetric blend. In asymmetric mixtures, an increasing incompatibility between polyelectrolytes triggers the usual cascade of first-order phase transitions, dis -> bcc -> hex -> lam. Fluctuations alter the phase diagram topology and allow the direct transitions from the disordered state (dis) to hex and lam microphases; for the symmetric blend, ODT becomes weakly first order. We also discuss that both microphase separation in polyelectrolyte blends and the formation of nuclear "pasta" phases within neutron stars are governed by similar physical principles, despite the 6 orders of magnitude difference in the periods of these structures.

Rumyantsev, Artem M.↗
DOE OSTI2024

Six-Letter DNA Nanotechnology: Incorporation of Z-P Base Pairs into Self-Assembling 3D Crystals

Artificially expanded genetic information systems (AEGIS) were developed to expand the diversity and functionality of biological systems. Recent experiments have shown that these expanded DNA molecular systems are robust platforms for information storage and retrieval as well as useful for basic biotechnologies. In tandem, nucleic acid nanotechnology has seen the use of information-based “semantomorphic” encoding to drive the self-assembly of a vast array of supramolecular devices. To establish the effectiveness of AEGIS toward nanotechnological applications, we investigated the ability of a six-letter alphabet composed of A:T, G:C and synthetic Z:P (Z, 6-amino-3-(1'-β- D-2'-deoxy ribofuranosyl)-5-nitro-(1H)-pyridin-2-one; P, 2-amino-8-(1'- β-D-2'-deoxyribofuranosyl)-imidazo-[1,2a]-1,3,5-triazin-(8H)-4-one) base pairs to engage in 3D self-assembly. We found that crystals could be programmably assembled from AEGIS oligomers. We conclude that unnatural base pairs can be used for the topological self-assembly of crystals. We anticipate the expansion of AEGISbased nucleic acid nanotechnologies to enable the development of novel nanomaterials, high-fidelity signal cascades, and dynamic nanoscale devices.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Bound and Continuum Intersubband Transitions in Colloidal Quantum Wells

Quantum well intersubband transitions are critical for quantum cascade lasers and infrared photodetectors. Control of band offsets allows bound-to-bound intersubband transitions, with confinement of both initial and final states, and bound-to-continuum transitions, in which only the initial state is energetically confined within the potential well. Both types of transitions are also achieved in colloidal CdSe wells by changing the heterostructure shell. Bare wells have narrow intersubband transitions spanning the near-infrared spectrum following effective mass predictions. Atomically precise core/shells enable a readily adjusted potential well for electrons. For CdSe/ZnS, bound-to-bound transitions are narrow and redshift with shell thickness. By contrast, broad bound-to-continuum absorptions are found in CdSe/CdS. Due to small conduction band offsets, higher conduction band states of the well are more delocalized into the CdS shell. In conclusion, these measurements provide unique data to understand the electronic structure of colloidal quantum wells and chart a path to atomically precise optoelectronic materials for the mid-infrared.

colloidal atomic layer deposition↗
DOE OSTI2022

Tunable Solid Acid Catalyst Thin Films Prepared by Atomic Layer Deposition

Solid acid catalysts, including zeolites and amorphous silica-aluminas (ASAs), are industrially important materials widely used in the fuel and petrochemical industries. The versatility of zeolites is due to the Brønsted acidity of the bridging hydroxyl and shape selectivity that can be tailored during and after synthesis. This is in contrast to amorphous silica-alumina, where tailoring acidity is a major challenge as the Brønsted acid structure in ASA is still debated. In both cases, however, the pore size and acidity cannot be tuned independently, and this is particularly limiting in the application of biomass conversion, where zeolite pores are too small for the molecules of interest. Herein, we present a method using atomic layer deposition (ALD) to prepare thin films of solid acid materials where the ratio of Brønsted to Lewis acid sites can be tuned precisely. This capability, combined with the sub-nm pore size control afforded by ALD yields a powerful and flexible method for synthesizing solid acid catalysts inside virtually any mesoporous host. We demonstrate the utility of these materials in two acid-catalyzed reactions relevant to biomass conversion: (1) Meerwein–Ponndorf–Verley–Oppenauer (MPVO) reaction and dehydration of fructose and (2) cascade reaction of glucose to 5-hydroxymethylfurfural. Finally, we propose a plausible structure for the Brønsted acid sites in our materials based on infrared spectroscopy and solid-state nuclear magnetic resonance measurements and density functional theory calculations and argue that this same structure might apply to conventional ASAs as well.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Multifunctional Effect of Fe Substitution in Na Layered Cathode Materials for Enhanced Storage Stability

In this study, developing stable cathode materials that are resistant to storage degradation is essential for practical development and industrial processing of Na-ion batteries, as many sodium layered oxide materials are susceptible to hygroscopicity and instability when exposed to ambient air. Among the various layered compounds, Fe-substituted O 3 -type Na(Ni 1/2 Mn 1/2 ) 1-x Fe x O 2 materials have emerged as a promising option for high-performance and low-cost cathodes. While previous reports have noted the decent air-storage stability of these materials, the role and origin of Fe substitution in improving storage stability remain unclear. In this study, we investigate the air resistant effect of Fe substitution in O 3 -Na(Ni 1/2 Mn 1/2 ) 1-x Fe x O 2 cathode materials by performing systematic surface and structural characterizations. We find that the improved storage stability can be attributed to the multifunctional effect of Fe substitution, which forms a surface protective layer containing an Fe-incorporated spinel phase and decreases the thermodynamical driving force for bulk chemical sodium extraction. With these mechanisms, the Fe-containing cathodes can suppress the cascades of cathode degradation processes and better retain the electrochemical performance after air storage.

25 ENERGY STORAGE↗