SEARCH · Engineering Papers

Results for “branching process”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

All sources NASA NTRS DOE OSTI

DOE OSTI2025

Multioutput Convolutional Neural Network for Improved Parameter Extraction in Time-Resolved Electrostatic Force Microscopy Data

Time-resolved scanning probe microscopy methods, like time-resolved electrostatic force microscopy (trEFM), enable imaging of dynamic processes ranging from ion motion in batteries to electronic dynamics in microstructured thin film semiconductors for solar cells. Reconstructing the underlying physical dynamics from these techniques can be challenging due to the interplay of cantilever physics with the actual transient kinetics of interest in the resulting signal. Previously, quantitative trEFM used empirical calibration of the cantilever or feed-forward neural networks trained on simulated data to extract the physical dynamics of interest. Both these approaches are limited by interpreting the underlying signal as a single exponential function, which serves as an approximation but does not adequately reflect many realistic systems. Here, we present a multi-branched, multi-output convolutional neural network (CNN) that uses the trEFM signal in addition to the physical cantilever parameters as input. The trained CNN accurately extracts parameters describing both single-exponential and bi-exponential underlying functions, and more accurately reconstructs real experimental data in the presence of noise. This article demonstrates an application of physics-informed machine learning to complex signal processing tasks, enabling more efficient and accurate analysis of trEFM.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Search for dark photons from Higgs boson decays via $ZH$ production with a photon plus missing transverse momentum signature from $pp$ collisions at $\sqrt{s}$ = 13 TeV with the ATLAS detector

This paper describes a search for dark photons ($γ_d$) in proton-proton collisions at $\sqrt{s}$ = 13 TeV at the Large Hadron Collider (LHC). The dark photons are searched for in the decay of Higgs bosons ($H$ → $γγ_d$) produced through the $ZH$ production mode. The transverse mass of the system, made of the photon and the missing transverse momentum from the non-interacting $γ_d$, presents a distinctive signature as it peaks near the Higgs boson mass. The results presented use the total Run-2 integrated luminosity of 139 fb –1 recorded by the ATLAS detector at the LHC. The dominant reducible background processes are estimated using data-driven techniques. A Boosted Decision Tree technique is adopted to enhance the sensitivity of the search. As no excess is observed with respect to the Standard Model prediction, an observed (expected) upper limit on the branching ratio BR($H$ → $γγ_d$) of 2.28% (${2.82}_{–0.84}^{+1.33}$%) is set at 95% CL for massless $γ_d$. For massive dark photons up to 40 GeV, the observed (expected) upper limits on BR($H$ → $γγ_d$) at 95% confidence level is found within the [2.19,2.52]% ([2.71,3.11]%) range.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2020

Two-Layer Dynamic Recycling Model (2L-DRM): Learning from Moisture Tracking Models of Different Complexity

Atmospheric moisture tracking models are used to identify and quantify sources and sinks of water in the atmospheric branch of the hydrologic cycle. These models are primarily used to investigate the origin of moisture resulting in precipitation for particular regions around the globe. Moisture tracking models vary widely in their level of complexity, depending on the number of physical processes represented. Complex models are comprehensive in their physical representation, but computationally much more expensive than simple models, which only focus on specific physical processes and use simplifying assumptions. We present the mathematical derivation of the new two-layer dynamical recycling model (2L-DRM), a simple analytical moisture tracking model that relaxes the vertically-integrated formulation of the original one-layer DRM (Dominguez et al., 2006). By comparing the simple DRM to a very complex moisture tracking model that uses water vapor tracers embedded within the Weather Research and Forecast regional climate model (WRF-WVT) for the North American Monsoon region, we pinpoint the absence of vertical wind shear as the main deficiency in the simple DRM. When comparing both simple models (DRM and 2L-DRM) to the WRF-WVT (which we treat as ‘truth’), the 2L-DRM better captures the spatial extent, the net amount and the temporal variability of precipitation that originates from oceanic and local terrestrial sources. The 2L-DRM is well suited to study the large-scale climatological sources of moisture, and for these applications, performs on-par with the much more complex and computationally demanding WRF-WVT model.

Dominguez, Francina↗

DOE OSTI2023

Wetland Soil Characterization and Methane Production Impacted by Nickel Addition, Argonne and Tims Branch Wetlands, September and October 2020

Abstract:Freshwater wetland soils are foci of biogeochemical cycling as they serve as key sources of methane to the atmosphere. An array of metalloenzymes is essential to anaerobic microbial carbon transformations. Nickel is notably recognized as playing key roles in the enzymatic pathways of methanogenesis. Low availability of trace metals limits microbial element cycling in laboratory studies, but the occurrence of such limitations in natural subsurface aquatic systems is poorly understood. Microcosm incubation studies were carried out using two distinct wetland soils, one from a marsh wetland and the second from a riparian wetland, to explore the effect of dissolved Ni concentrations on methane production. Data are provided for wetland soil characterization and soil incubation experiments using materials from marsh wetlands at Argonne National Laboratory and riparian wetlands in the Tims Branch watershed at Savannah River National Laboratory. The characterization data consists soil carbon, nitrogen, sulfur, and iron contents plus as well as the solid-phase concentrations of copper, nickel, cobalt, and zinc, bioessential trace metals that may limits microbial metabolic process if they have low availability. The data for the soil incubation experiments include fluid pH, fluid dissolved trace metal concentrations, and cumulative methane production. Three soil incubations are reported: marsh wetland soil with increasing nickel addition, marsh wetland soil in sulfate-free water with increasing nickel addition, and riparian wetland soil with increasing nickel addition. All data are provided in text-based CSV format with header sections indicating the data contained in each file and the corresponding units. Note that "u" is used in place of Greek lower case mu to indicate the micro prefix on units. A Table of Contents file (Yan_Soil_Incubations_2020_TOC.txt) provides an index for the data contained in the individual files.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2022

On the Spectral Evolution of Hot White Dwarf Stars. II. Time-dependent Simulations of Element Transport in Evolving White Dwarfs with STELUM

White dwarf stars are subject to various element transport mechanisms that can cause their surface composition to change radically as they cool, a phenomenon known as spectral evolution. In this paper, we undertake a comprehensive theoretical investigation of the spectral evolution of white dwarfs. First, we introduce STELUM, a new implementation of the stellar evolutionary code developed at the Université de Montréal. We provide a thorough description of the physical content and numerical techniques of the code, covering the treatment of both stellar evolution and chemical transport. Then, we present two state-of-the-art numerical simulations of element transport in evolving white dwarfs. Atomic diffusion, convective mixing, and mass loss are considered simultaneously as time-dependent diffusive processes and are fully coupled to the cooling. We first model the PG 1159-DO-DB-DQ evolutionary channel: a helium-, carbon-, and oxygen-rich PG 1159 star transforms into a pure-helium DB white dwarf due to gravitational settling and then into a helium-dominated, carbon-polluted DQ white dwarf through convective dredge-up. We also compute for the first time the full DO-DA-DC evolutionary channel: a helium-rich DO white dwarf harboring residual hydrogen becomes a pure-hydrogen DA star through the float-up process and then a helium-dominated, hydrogen-bearing DC star due to convective mixing. We demonstrate that our results are in excellent agreement with available empirical constraints. In particular, our DO-DA-DC simulation perfectly reproduces the lower branch of the bifurcation observed in the Gaia color–magnitude diagram, which can therefore be interpreted as a signature of spectral evolution.

79 ASTRONOMY AND ASTROPHYSICS↗

NASA NTRS1993

Development of methodologies for the estimation of thermal properties associated with aerospace vehicles

Thermal stress analyses are an important aspect in the development of aerospace vehicles such as the National Aero-Space Plane (NASP) and the High-Speed Civil Transport (HSCT) at NASA-LaRC. These analyses require knowledge of the temperature within the structures which consequently necessitates the need for thermal property data. The initial goal of this research effort was to develop a methodology for the estimation of thermal properties of aerospace structural materials at room temperature and to develop a procedure to optimize the estimation process. The estimation procedure was implemented utilizing a general purpose finite element code. In addition, an optimization procedure was developed and implemented to determine critical experimental parameters to optimize the estimation procedure. Finally, preliminary experiments were conducted at the Aircraft Structures Branch (ASB) laboratory.

Scott, Elaine P.↗

DOE OSTI2024

Measuring thermomechanical response of large-format printed polymer composite structures via digital image correlation

Large-format additive manufacturing (LFAM) is a branch of additive manufacturing (AM) research with the ability to create large structures typically measuring several meters in scale. LFAM is advantageous for tooling applications, not only because it offers the ability to create complex geometries not easily made using subtractive manufacturing processes, but the cost savings of pelletized feedstock used by these systems result in larger parts printed at faster speeds than traditional AM systems. Fiber reinforced polymer (FRP) is a commonly used feedstock material in LFAM structures because it reduces the distortion experienced during printing. However, FRP introduces highly anisotropic thermomechanical properties and contributes to a nonhomogeneous microstructure that can result in critical distortion of dimensions during tooling. Measuring the global thermomechanical response of LFAM structures requires a more representative method that accounts for not only anisotropic properties but also the nonhomogeneous nature of the final part. This is where traditional techniques to measure thermomechanical response, such as thermomechanical analysis (TMA), fall short as they assume homogeneity. This study evaluated the coefficient of thermal expansion (CTE) of LFAM structures as measured by TMA as compared to a novel digital image correlation oven (DIC Oven) system. The LFAM structures were made from 20 % by weight carbon fiber reinforced acrylonitrile butadiene styrene (CF-ABS). TMA measurements showed significant variations in CTE across a single LFAM bead, confirming the need for a global technique that captures overall thermomechanical response. The CTE values measured using the DIC Oven compared well to average TMA values obtained from localized measurements across the sample. The DIC Oven was also used to quantify the effects of different layer orientations on thermomechanical properties, which cannot be easily captured using TMA. A predictive model was also developed by using localized TMA values across an LFAM bead to predict the overall thermomechanical response of an LFAM structure.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Development and Experimental Validation of a Heat Transfer Model for Spilled Molten Salt Pools

A spill of radionuclide-bearing molten salt is one of the major postulated events that needs to be analyzed for liquid fluorine salt-cooled high-temperature reactor (FHR) or molten salt reactor licensing purposes. In this postulated event, radioactive source term materials (RSTMs) in the molten salt are discharged from the reactor vessel to the reactor building. The release of RSTMs from the spilled salt pool to the gas space in the reactor building is expected to be controlled by the cooling behavior of the spilled salt, including the growth and shrinkage of the solid crust on the surface of the spilled salt pool. This paper presents a simulation model for spilled salt pool heat transfer and validation efforts. The validation data come from two molten salt spill tests that were performed recently: the PELE2 test by the Rapid Experimental Laboratory of Kairos Power LLC (KP) and the Argonne salt cooling test conducted by Argonne National Laboratory. The former was a large-scale test involving kilograms of molten spilled FLiNaK salt, and the latter was a relatively smaller-scale test targeting various processes associated with a salt spill event. Both tests generated valuable data sets that can be used to assess salt cooling and validate evaluation models. This paper provides a new one-dimensional model that can simulate the cooling process of a spilled salt pool as well as the thermal responses of heat structures, such as the stainless steel liner and the concrete below the salt. The model has been implemented as part of KP-SAM code, which is a branch of the systems code SAM specific to KP FHR. In conclusion, the simulation results of the model are compared with the data of the PELE2 and Argonne tests, and reasonable agreements are observed between the model and test data.

heat transfer model↗

NASA NTRS1993

Turbulence modeling in aircraft icing

The Icing and Cryogenic Technology Branch develops computational tools which predict ice growth on aircraft surfaces and uses existing CFD technology to evaluate the aerodynamic changes associated with such accretions. Surface roughness, transition location, and laminar, transition, or turbulent convective heat transfer all influence the ice growth process on aircraft surfaces. Turbulence modeling is a critical element within the computational tools used for both ice shape prediction and for performance degradation evaluation.

Potapczuk, Mark G.↗

NASA NTRS1999

Characterization of Infrared Diode Laser Beams and Atmospheric CO Imaging Instrument

During June-August 1997 Dr. Jonathan Miles participated in the ASEE-sponsored summer faculty research program at NASA Langley Research Center (LaRC). The Aerospace Electronic Systems Division (AESD), Sensor Systems Branch (SSB), at NASA LARC had proposed a new mission, GEOstationary TROpospheric Pollution SATellite (GEO TROPSAT), to address critical science questions of tropospheric chemistry. The troposphere is a complex system, comprising "point" and distributed sources of natural and anthropogenic origin; complicated transport processes, both lateral and vertical; and photochemistry driven by UV flux, temperature, atmospheric composition, and other variables. GEO TROPSAT would be implemented about a geostationary Earth orbital (GEO) position at the equator between 600 and 80" West longitude to observe the Americas and large portions of the oceans of either coast. This mission would advance our knowledge of the atmosphere by capturing the wide temporal and spatial variability of tropospheric phenomena which is undetectable from low Earth orbit. A pre-prototype imaging carbon monoxide (CO) imaging system operating within a narrow waveband about 4.7 [Lm was built, demonstrated, and evaluated. This system applies the gas-filter correlation radiometry (GFCR) technique and produces digitized images comprising 4096 pixels, each representing a single CO mixing ratio measurement inferred from radiometric data. Associated tasks accomplished included specification for the next-generation prototype system to operate in the 2.3-@tm waveband; characterization of a 64x64, InSb focal-plane-array (FPA) imager; design, fabrication, and assembly of a filter wheel; and software development. Laboratory evaluation of this system involved imaging of a test cell placed in the path of radiant flux emanating from a blackbody source used to simulate the radiant energy reflected by Earth in real application. The cell was evacuated for system balancing and then charged with measured quantities of CO to provide a means for system characterization. Two related research efforts were undertaken during the term of the study reported here - continued development of an atmospheric CO imaging instrument and characterization of diode-laser beams. Both efforts were successful and are described within the body of this report. A second objective was to provide a means for undergraduate ISAT majors to become involved with the research described, to be afforded the opportunity to learn the technologies associated with the work performed. Two ISAT students gained a comprehensive understanding and interest in missions supported by NASA through direct involvement in this project. Many more students were exposed to these technologies through demonstrations, laboratory tours, and explanations provided in lectures.

Miles, Jonathan J.↗

NASA NTRS2005

The Abundance of Interstellar Fluorine

The primary objective of this program was to obtain FUSE observations of the interstellar absorption lines of F I at 951 and 954 Angstroms to derive the abundance of fluorine toward the star HD 164816. The nucleosynthetic source(s) of fluorine are still a matter of debate - the present day abundance of fluorine can potentially constrain models for pulsationally driven dredge-up in asymptotic giant branch stars. An accurate measure for the depletion behavior of fluorine will determine whether it may be detectable in QSO absorption line systems - an unambiguous detection of fluorine at suitably high redshifts would provide the best evidence to date for the neutrino process in massive stars. Furthermore, due to its extreme reactivity, measurement of the gas-phase interstellar fluorine abundance is important for models of grain chemistry. Despite the importance of measuring the interstellar fluorine abundance, at the time of our proposal only one previous detection has been made due to the low relative abundance of fluorine, the lack of lines outside the far-UV, and the blending of the available F I transitions with lines of Hz. The star HD 164816 is associated with the Lagoon nebula (M8), and at a distance of approximately 1.5 kpc probes both distant and local gas. Beginning April 8th, 2004 FUSE FP-Split observations of the star HD 164816 were obtained for this program. This data became available in the FUSE data archive May 21, 2004, and these observations were then downloaded and we began our analysis. Our analysis procedure has involved (1) fitting stellar models to the FUSE spectra, (2) using the multiple lines of Hz and N I at other wavelengths in the FUSE bandpass to derive column densities for the lines of H2 and N I which are blended with the F I features at 951 and 954 angstroms (3) the measurement of the column densities of F I and the species O I and C1 I which are important species for the dis-entangling of dust and nucleosynthetic effects. As discussed in our poster paper presented at the Winter 2005 American Astronomical Society meeting (Lauroesch et al. 2004, AAS, 205, 57.06), our analysis of the data taken for this star suggests that the observed fluorine gas-phase abundance (and hence inferred depletion onto dust grains) are consistent with previous measures toward delta Sco (Copernicus) and two recent measures toward stars in Cep OB2 obtained by others with FUSE. We are currently revising the draft a paper for submission to the Astrophysical Journal which presents the results of these observations and in addition our recently obtained FUSE observations of another star (HD 103779, FUSE GO program D073) which shows an apparent slight enhancement in the gas-phase fluorine abundance.

Lauroesch, James T.↗

NASA NTRS2004

The Center Master Plan For NASA Glenn Research Center

The Center Master Plan for NASA Glenn Research Center is a comprehensive survey of NASA Glenn's current facility assets and a vision of how we see the facilities will change over the next 20 years in order to support the changing NASA Mission. This Center Master Plan is a vital management tool used by all organizations for making near term decisions and in future planning. During the summer of 2004, I worked with Joseph Morris, the Chief Architect in the Facilities Division, on beginning this Center Master Planning Process. The previous Master Plan was completed by the Center in 1985 and contained general information on the background of the facility as well as maps detailing environmental and historic records, land use, utilities, etc. The new Master Plan is required for the Center by NASA headquarters and will include similar types of information as used in the past. The new study will provide additional features including showing how individual buildings are linked to the programs and missions that they serve. The Master Plan will show practical future options for the facility s assets with a twenty year look ahead. The Plan will be electronically retrievable so that it becomes a communications tool for Center personnel. A Center Master Plan, although required, is very beneficial to NASA Glenn Research Center in aiding management with the future direction of the campus. Keeping up-to-date information and future plans readily available to all of NASA Glenn will insure that future real property development efficiently and effectively supports the missions camed out and supported by the Center. A Center Master Plan will also facilitate coordination with Center supported programs, stakeholders, and customers. In addition, it will provide a basis for cooperative planning with local and other governmental organizations and ultimately ensure that future budgets include the Center program needs described in the plan. This will ensure that development plans are safe, practical, and cost effective. To properly formulate any future plans, background information and research are required. Before bringing in a consultant to tackle the three year process anticipated to prepare a Center Master Plan, my job was to gather information on different organizations contributions to the NASA mission, their facility needs, consistent trends they observe, etc. I conducted numerous interviews with personnel such as Directorate Representatives, Division Chiefs, Branch Chiefs, System Managers and Building Managers. I documented the information I received from them for future use. I used the information to create various color-coded maps layering the different data. This was done with the ending objective being to collect the information and place it in a database that will be linked with Aperture (a computer program that generates color-coded map layers from database information) and made electronically retrievable to the Planning Consultant, NASA personnel, program stakeholders, and other governmental agencies. My goal this summer was to gather information and ideas appropriate for use in NASA Glenn Research Center s Master Plan and organize them for future application by the Planning Consultant. By the end of the summer, after completion of my goal, I will utilize my knowledge and create an array of preliminary future plans for the facility that can be passed along as a guidance tool.

Bigach, Kristin M.↗

DOE OSTI2024

Characterization of Levan Fructan Produced by a Gluconobacter japonicus Strain Isolated from a Sugarcane Processing Facility

During raw sugarcane processing, a significant portion of lost sucrose is attributable to microbial degradation. Sucrose consumption by many bacteria is also linked to the production of exopolysaccharides (EPS) such as dextrans and fructans. These resulting EPS cause operational challenges during raw sugar manufacturing. Here, we report the characterization of EPS from a fructan-forming Gluconobacter japonicus bacterium that we previously isolated from a Louisiana sugarcane factory. The genome sequencing revealed the presence of two encoded levansucrase genes, lsrA and lsrB. One levansucrase, LsrB, was detected in the secreted protein fraction of G. japonicus LASM12 by QTOF LC-MS. The spotting assays indicated that G. japonicus produces EPS using sucrose and raffinose as substrates. The G. japonicus EPS correlated with levan fructan commercial standards by 1H-NMR, and with the characteristic carbohydrate fingerprint region for FTIR spectra, confirming that the G. japonicus EPS is levan fructan. The glycosyl composition and glycosyl linkage analysis revealed a linear β-2,6-fructofuranosyl polysaccharide with occasional (5.7%) β-2,1-fructofuranosyl branches. The gel permeation chromatography of the levan fructan EPS showed two main peaks at 4.5 kDa and 8 kDa and a very minor peak at 500 kDa. G. japonicus was identified as a producer of levan fructan. These findings will be useful for future studies aimed at evaluating the impact of levan fructans on sugar crop processing, which have been historically underestimated in industry.

59 BASIC BIOLOGICAL SCIENCES↗

NASA NTRS1979

Model for breakdown process in dielectric discharges

A heuristic model to explain the blowoff of charge during an electron-induced dielectric discharge is presented. It is proposed that blowoff of charge is initiated by a punchthrough or a flashover. The discharge time is assumed to be governed by an LC time constant where L is the inductance of the electrons flowing in the branches of the Lichtenberg figures at an electron range below the irradiated surface and C is the capacitance between the trapped electrons and the substrate for the discharged area. Experiments to verify that blowoff is a consequence of punchthrough or flashover and to measure the punchthrough current and the variation of discharge time with the sample area and thickness were conducted.

Leadon, R.↗

DOE OSTI2023

Flavor-changing light bosons with accidental longevity

We consider a model with a complex scalar field that couples to (e, μ) or (μ, τ) within the “longevity” window: [|m l 1 – m l 2 |, m l 1 + m l 2 ] in which l 1 and l 2 are the two different charged leptons. Within such a mass window, even a relatively large coupling (e.g. of the size commensurate with the current accuracy/discrepancy in the muon g – 2 experiment) leads to long lifetimes and macroscopic propagation distance between production and decay points. We propose to exploit several existing neutrino experiments and one future experiment to probe the parameter space of this model. For the μ – e sector, we exploit the muonium decay branching ratio and the production and decay sequence at the LSND experiment, excluding the parametric region suggested by g μ – 2 anomaly. For the τ – μ sector, we analyze three main production mechanisms of scalars at beam dump experiments: the Drell-Yan process, the heavy meson decay, and the muon scattering. We explore the constraints from the past CHARM and NuTeV experiments, and evaluate sensitivity for the proposed beam dump experiment, SHiP. The latter can thoroughly probe the parameter space relevant for the g μ – 2 anomaly.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2025

Synergistic learning with multi-task DeepONet for efficient PDE problem solving

Multi-task learning (MTL) is an inductive transfer mechanism designed to leverage useful information from multiple tasks to improve generalization performance compared to single-task learning. It has been extensively explored in traditional machine learning to address issues such as data sparsity and overfitting in neural networks. In this work, we apply MTL to problems in science and engineering governed by partial differential equations (PDEs). However, implementing MTL in this context is complex, as it requires task-specific modifications to accommodate various scenarios representing different physical processes. To this end, we present a multi-task deep operator network (MT-DeepONet) to learn solutions across various functional forms of source terms in a PDE and multiple geometries in a single concurrent training session. We introduce modifications in the branch network of the vanilla DeepONet to account for various functional forms of a parameterized coefficient in a PDE. Additionally, we handle parameterized geometries by introducing a binary mask in the branch network and incorporating it into the loss term to improve convergence and generalization to new geometry tasks. Our approach is demonstrated on three benchmark problems: (1) learning different functional forms of the source term in the Fisher equation; (2) learning multiple geometries in a 2D Darcy Flow problem and showcasing better transfer learning capabilities to new geometries; and (3) learning 3D parameterized geometries for a heat transfer problem and demonstrate the ability to predict on new but similar geometries. Finally, our MT-DeepONet framework offers a novel approach to solving PDE problems in engineering and science under a unified umbrella based on synergistic learning that reduces the overall training cost for neural operators.

42 ENGINEERING↗

DOE OSTI2024

A fungal protein organizes both glycogen and cell wall glucans

Glycogen is a glucose storage molecule composed of branched α-1,4-glucan chains, best known as an energy reserve that can be broken down to fuel central metabolism. Because fungal cells have a specialized need for glucose in building cell wall glucans, we investigated whether glycogen is used for this process. For these studies, we focused on the pathogenic yeast Cryptococcus neoformans, which causes ~150,000 deaths per year worldwide. We identified two proteins that influence formation of both glycogen and the cell wall: glycogenin (Glg1), which initiates glycogen synthesis, and a protein that we call Glucan organizing enzyme 1 (Goe1). We found that cells missing Glg1 lack α-1,4-glucan in their walls, indicating that this material is derived from glycogen. Without Goe1, glycogen rosettes are mislocalized and β-1,3-glucan in the cell wall is reduced. Altogether, our results provide mechanisms for a close association between glycogen and cell wall.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2026

Beta-Delayed Neutron Emission of 𝑁=84 132Cd

Using the time-of-flight technique, we measured the beta-delayed neutron emission of 132 Cd . From our large-scale shell model (LSSM) calculation using the N3⁢LO interaction [, Phys. Rev. Lett. 131, 022501 (2023)], we suggest the decay is dominated by the transformation of a neutron in the 𝑔7/2 orbital, deep below the Fermi surface, into a proton in the 𝑔9/2 orbital. We compare the beta-decay half-lives and neutron branching ratios of nuclei with 𝑍<50 and 𝑁 ≥82 obtained with our LSSM with those of leading “global” models such as finite-range droplet model (FRDM). Our calculations match known half-lives and neutron branching ratios well and suggest that current leading models overestimate the yet-to-be-measured half-lives. Our model, backed by the 132 Cd decay data presented here, offers robust predictive power for nuclei of astrophysical interest such as 𝑟-process waiting points.

Madurga, M [Department of Physics and Astronomy, U↗