SEARCH · Engineering Papers

Results for “atomic volume”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

All sources NASA NTRS DOE OSTI

DOE OSTI2022

36 Hz integral linewidth laser based on a photonic integrated 4.0 m coil resonator

Laser stabilization sits at the heart of many precision scientific experiments and applications, including quantum information science, metrology, and atomic timekeeping. Many of these systems narrow the laser linewidth and stabilize the carrier by use of Pound–Drever–Hall (PDH) locking to a table-scale, ultrahigh quality factor (Q), vacuum spaced Fabry–Perot reference cavity. Integrating these cavities to bring characteristics of PDH stabilization to the chip scale is critical to reducing their size, cost, and weight, and enabling a wide range of portable and system-on-chip applications. We report a significant advance in integrated laser linewidth narrowing, stabilization, and noise reduction by use of a photonic integrated 4.0 m long coil resonator to stabilize a semiconductor laser. We achieve a 36 Hz 1 / π <#comment/> -integral linewidth, Allan deviation of 1.8 × <#comment/> 10 − <#comment/> 13 at 10 ms measurement time, and a 2.3 kHz/s drift—to the best of our knowledge, the lowest integral linewidth and highest stability demonstrated for an integrated waveguide reference cavity. This performance represents over an order of magnitude improvement in integral linewidth and frequency noise over previous integrated waveguide PDH stabilized reference cavities and bulk-optic and integrated injection locked approaches, and over two orders of magnitude improvement in frequency and phase noise than integrated injection locked approaches. Two different wavelength coil designs are demonstrated, stabilizing lasers at 1550 nm and 1319 nm. The resonator is bus-coupled to a 4.0 m long coil, with a 49 MHz free spectral range, mode volume of 1.0 × <#comment/> 10 10 µ <#comment/> m 3 , and 142 million intrinsic Q , fabricated in a CMOS compatible, ultralow loss silicon nitride waveguide platform. Our measurements and simulations show that the thermorefractive noise floor for this particular cavity is reached for frequencies down to 20 Hz in an ambient environment with simple passive vibration isolation and without vacuum or thermal isolation. The thermorefractive noise limited performance is estimated to yield an 8 Hz 1 / π <#comment/> -integral linewidth and Allan deviation of 5 × <#comment/> 10 − <#comment/> 14 at 10 ms, opening a stability regime that heretofore has been available only in fundamentally non-integrated systems. These results demonstrate the potential to bring the characteristics of laboratory-scale stabilized lasers to the integrated, wafer-scale compatible chip scale, and are of interest for a number of applications in quantum technologies and atomic, molecular, and optical physics, and with further developments below 10 Hz linewidth, can be highly relevant to ultralow noise microwave generation.

Liu, Kaikai (ORCID:0000000213609646)↗

DOE OSTI2025

Tuning the magnetic properties of the spin-split antiferromagnet MnTe through pressure

The hexagonal antiferromagnet MnTe has attracted enormous interest as a prototypical example of a spin-compensated magnet in which the combination of crystal and spin symmetries lifts the spin degeneracy of the electron bands without the need for spin-orbit coupling, a phenomenon called nonrelativistic spin splitting (NRSS). Subgroups of NRSS are determined by the specific spin-interconverting symmetry that connects the two opposite-spin sublattices. In MnTe, this symmetry is rotation, leading to the subgroup with spin splitting away from the Brillouin zone center, often called altermagnetism. MnTe also has the largest spontaneous magnetovolume effect of any known antiferromagnet, implying strong coupling between the magnetic moment and volume. This magnetostructural coupling offers a potential knob for tuning the spin-splitting properties of MnTe. Here, we use neutron diffraction with in situ applied pressure to determine the effects of pressure on the magnetic properties of MnTe and further explore this magnetostructural coupling. We find that applying pressure significantly increases the Néel temperature, but decreases the ordered magnetic moment. We explain this as a consequence of strengthened magnetic exchange interactions under pressure, resulting in higher 𝑇 N , with a simultaneous reduction of the local moment of individual Mn atoms, described here via density functional theory. This reflects the increased orbital hybridization and electron delocalization with pressure. In conclusion, these results shed light on the competition between magnetic exchange interactions and the strength of individual magnetic moments and show that the magnetic properties of MnTe can be controlled by pressure, opening the door to improved properties for spintronic applications through tuning via physical or chemical pressure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2023

LEU Fission Plate: Experimental Prototype Design Document

The Ultracold Neutron (UCN) source at LANSCE is currently the source of the highest density of UCN in the world. We intend to use innovative new solutions to boost our UCN density in order to maintain our leadership in this competitive field. Prior studies suggest that a fission plate neutron multiplier made from low enriched uranium (LEU) installed between our spallation target and UCN source moderator can boost the density by up to a factor of ten. Here we present a prototype of this idea that uses an existing one liter volume of LEU that can boost the UCN density by roughly a factor of 2. Additional simulation studies presented here also suggest that we may find more gains by replacing some of the moderator or reflector geometries with beryllium.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2020

Velocity Measurements in Channel Gas Flows in the Slip Regime by means of Molecular Tagging Velocimetry

Direct measurements of the slip velocity in rarefied gas flows produced by local thermodynamic non-equilibrium at the wall represent crucial information for the validation of existing theoretical and numerical models. In this work, molecular tagging velocimetry (MTV) by direct phosphorescence is applied to argon and helium flows at low pressures in a 1-mm deep channel. MTV has provided accurate measurements of the molecular displacement of the gas at average pressures of the order of 1 kPa. To the best of our knowledge, this work reports the very first flow visualizations of a gas in a confined domain and in the slip flow regime, with Knudsen numbers up to 0.014. MTV is cross-validated with mass flowrate measurements by the constant volume technique. The two diagnostic methods are applied simultaneously, and the measurements in terms of average velocity at the test section are in good agreement. Moreover, preliminary results of the slip velocity at the wall are computed from the MTV data by means of a reconstruction method

74 ATOMIC AND MOLECULAR PHYSICS↗

NASA NTRS1995

The Long Duration Exposure Facility (LDEF) annotated bibliography

A major objective of the Space Act of 1958 which led to the establishment of the National Aeronautics and Space Administration (NASA) was the dissemination of science and technology. Today, under NASA administrator Daniel Goldin and the White House, there is a reemphasis on the dissemination and transfer of NASA science and technology to U.S. industry: both aerospace and non aerospace. The goal of this transfer of science and technology is to aid U.S. industries, making them more competitive in the global economy. After 69 months in space, LDEF provided new and important information on the space environment and how this hostile environment impacts spacecraft materials and systems. The space environment investigated by the LDEF researchers included: ionizing radiation, ultraviolet radiation, meteoroid and debris, atomic oxygen, thermal cycling, vacuum, microgravity, induced contamination and various synergistic effects. The materials used as part of LDEF and its experiments include polymers, metals, glass, paints and coatings. Fiber optic, mechanical, electrical, and optical systems were also used on LDEF. As part of the effort to disseminate and transfer LDEF science and technology, an annotated bibliographic database is being developed. This bibliography will be available electronically, as well as in hard copy. All LDEF domestic and foreign publications in the open literature, including scientific journals, the NASA LDEF Symposia volumes, books, technical reports and unrestricted contractor reports will be included in this database. The hard copy, as well as the electronic database, will be categorized by section in the scientific and technical discipline.

Levine, Arlene S.↗

DOE OSTI2023

A sensitivity analysis of twinning crystal plasticity finite element model using single crystal and poly crystal Zircaloy

The popularity of crystal plasticity finite element method (CPFEM) models is increasing due to their ability to predict the mechanical response of crystalline materials such as metals and metal alloys more accurately than traditional continuum mechanics models. This is since the crystal plasticity models consider the effect of atomic structure, microstructural morphology, and properties of individual grains. These CPFEM models use a large number of material parameters in order to capture the mesoscale physics which comes with the downside of the tedious calibration process. In this paper, a CPFEM code was developed to include the twinning induced grain reorientation and subsequent crystallographic slip for HPC material. The developed code is incorporated in a large-scale, parallelized nonlinear solver WARP3D. Further, a sensitivity analysis with respect to 22 material parameters was then conducted using single crystal and polycrystal representative volume element (RVE) of Zircaloy material. Loading was applied along five different crystallographic orientations for single crystal RVE and along three directions namely, rolling (RD), transverse (TD), and normal (ND) direction for polycrystal RVE. Results obtained from the sensitivity analysis were used for the calibration of material parameters for Zircaloy. Finally, developed code along with calibrated material parameters was used to investigate the effect of the hydride phase formation in Zircaloy which is a typical case observed for nuclear applications. It was found that the volume fraction of the hydride phase has a significant impact on the mechanical properties of Zircaloy.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Observation of substrate diffusion and ligand binding in enzyme crystals using high-repetition-rate mix-and-inject serial crystallography

Here, we illustrate what happens inside the catalytic cleft of an enzyme when substrate or ligand binds on single-millisecond timescales. The initial phase of the enzymatic cycle is observed with near-atomic resolution using the most advanced X-ray source currently available: the European XFEL (EuXFEL). The high repetition rate of the EuXFEL combined with our mix-and-inject technology enables the initial phase of ceftriaxone binding to the Mycobacterium tuberculosis β-lactamase to be followed using time-resolved crystallography in real time. It is shown how a diffusion coefficient in enzyme crystals can be derived directly from the X-ray data, enabling the determination of ligand and enzyme–ligand concentrations at any position in the crystal volume as a function of time. In addition, the structure of the irreversible inhibitor sulbactam bound to the enzyme at a 66 ms time delay after mixing is described. This demonstrates that the EuXFEL can be used as an important tool for biomedically relevant research.

36 MATERIALS SCIENCE↗

NASA NTRS1998

Soot Formation in Laminar Premixed Methane/Oxygen Flames at Atmospheric Pressure

Flame structure and soot formation were studied within soot-containing laminar premixed mc1hane/oxygen flames at atmospheric pressure. The following measurements were made: soot volume fractions by laser extinction, soot temperatures by multiline emission, gas temperatures (where soot was absent) by corrected fine-wire thermocouples, soot structure by thermophoretic sampling and transmission electron microscope (TEM), major gas species concentrations by sampling and gas chromatography, and gas velocities by laser velocimetry. Present measurements of gas species concentrations were in reasonably good agreement with earlier measurements due to Ramer et al. as well as predictions based on the detailed mechanisms of Frenklach and co-workers and Leung and Lindstedt: the predictions also suggest that H atom concentrations are in local thermodynamic equilibrium throughout the soot formation region. Using this information, it was found that measured soot surface growth rates could be correlated successfully by predictions based on the hydrogen-abstraction/carbon-addition (HACA) mechanisms of both Frenklach and co-workers and Colket and Hall, extending an earlier assessment of these mechanisms for premixed ethylene/air flames to conditions having larger H/C ratios and acetylene concentrations. Measured primary soot particle nucleation rates were somewhat lower than the earlier observations for laminar premixed ethylene/air flames and were significantly lower than corresponding rates in laminar diffusion flames. for reasons that still must be explained.

Xu, F.↗

NASA NTRS2001

Soot Formation in Laminar Premixed Methane/Oxygen Flames at Atmospheric Pressure

Flame structure and soot formation were studied within soot-containing laminar premixed methanefoxygen flames at atmospheric pressure. The following measurements were made: soot volume fractions by laser extinction, soot temperatures by multiline emission, gas temperatures (where soot was absent) by corrected fine-wire thermocouples, soot structure by thermophoretic sampling and transmission electron microscope (TEM), major gas species concentrations by sampling and gas chromatography, and gas velocities by laser velocimetry. Present measurements of gas species concentrations were in reasonably good agreement with earlier measurements due to Ramer et al. as well as predictions based on the detailed mechanisms of Frenklach and co-workers and Leung and Lindstedt; the predictions also suggest that H atom concentrations are in local thermodynamic equilibrium throughout the soot formation region. Using this information, it was found that measured soot surface growth rates could be correlated successfully by predictions based on the hydrogenabstraction/carbon-addition (HACA) mechanisms of both Frenklach and co-workers and Colket and Hall, extending an earlier assessment of these mechanisms for premixed ethylene/air flames to conditions having larger H/C ratios and acetylene concentrations. Measured primary soot particle nucleation rates were somewhat lower than the earlier observations for laminar premixed ethylene/air flames and were significantly lower than corresponding rates in laminar diffusion flames, for reasons that still must be explained.

Xu, F.↗

NASA NTRSDate not supplied

On Computationally Efficient Radiative Transfer Calculations for Three-dimensional Entry Problems

The current work presents an efficient simulation framework for rigorously modeling radiative fields emanating from non-equilibrium planetary entry flows in complex three-dimensional domains. Key to this endeavor is adoption of finite-volume discretization in lieu of brute-force ray tracing. This change in conjunction with mesh sweeping and Lebedev-type quadrature for angular integration allows spatial-angular resolution of radiative transfer to be performed in a computationally tractable manner. Additionally, a new methodology has been established to build standalone reduced-order spectral databases for non-equilibrium radiative properties that can be applied to a broad range of hypersonic planetary entry problems with minimal loss in accuracy. The efficacy of the new framework has been demonstrated on the atomic nitrogen radiative system. The resulting reduced-order model requires three orders-of-magnitude fewer spectral evaluations and results in a 95% decrease in memory footprint. A comparative study for representative forebody and afterbody lines-of-sight from Stardust, FIRE II, and meteor entries into the Earth atmosphere indicates that both total intensity variation and detailed spectra can be retrieved with as few as 625 reduced-order groups (contrasting with the 100,000 frequencies in the original full set model). Similarly, three-dimensional predictions of radiative heating experienced by the Orion forebody are in excellent agreement with legacy radiation solvers while requiring only a sliver (roughly 0.5%) of computing wall time.

3D radiation↗

NASA NTRSDate not supplied

On Computationally Efficient Radiative Transfer Calculations for Three-Dimensional Entry Problems

3D radiation↗

DOE OSTI2024

Combined Machine Learning and Molecular Dynamics Reveal Two States of Hydration of a Single Functional Group of Cationic Polymeric Brushes

The state of hydration of a macromolecular system regulates a plethora of different properties of such a system. In this article, we develop a novel machine learning (ML) approach, based on the unsupervised clustering algorithm, for probing the hydration behavior of the {N(CH 3 ) 3 } + functional group of the PMETAC [Poly(2-(methacryloyloxy)ethyl trimethylammonium chloride] polyelectrolyte (PE) brush system. The PE brushes and the brush-supported water molecules and counterions (chloride ions) are first described using all-atom molecular dynamics (MD) simulations. The simulation data is subsequently used in our ML framework to identify that (1) the {N(CH 3 ) 3 } + functional groups of the PMETAC brushes have two distinct hydration states with one state (state 1) being characterized by less structured water molecules and the other state (state 2) being characterized by more structured water molecules and (2) an enhancement in the brush grafting density leads to the progressive dissapparenace of state 2. An increase in the grafting density increases the number of chloride counterions in a given volume around the {N(CH 3 ) 3 } + functional group and increases the number of shared water molecules between the {N(CH 3 ) 3 } + and Cl - . The chloride counterions are associated with a hydration layer with much less structured water molecules. Therefore, with an increase in the grafting density, an increase in the percentage of shared water molecules leads to the prevalence of the hydration state [of the {N(CH 3 ) 3 } + moiety] with less structured water molecules. Finally, we explain how the present findings are commensurate with two key previous related results, namely a significantly large chloride ion mobility inside the PMETAC brush layer and the {N(CH 3 ) 3 } + -Cl - average distance remaining independent of the PMETAC brush grafting density. Furthermore, we anticipate that the combined ML-MD-simulation approach proposed in this study can be adapted to probe other soft matter systems to reveal new insights of the underlying mechanisms of emergent phenomenon.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Flux effects in precipitation under irradiation simulation of Fe-Cr alloys

Radiation-enhanced precipitation of Cr-rich α’ in irradiated Fe-Cr alloys, which results in hardening and embrittlement, depends on the irradiating particle and the displacement per atom (dpa) rate. Here, we utilize a Cahn-Hilliard phase-field based approach, that includes simple models for nucleation, irradiating particle and rate dependent radiation-enhanced diffusion and cascade mixing to simulate α’ evolution under neutrons, heavy ions, and electron irradiations. Different irradiating particles manifest very different cascade mixing efficiencies. The model was calibrated using neutron data. For cascade inducing neutron/heavy-ion dpa rates at 300 °C between 10-8 and 10-6 dpa/s the model predicts approximately constant number density, decreasing radius, decreasing α’ Cr composition, and lower α’ volume fraction. The model then predicts a dramatic transition to no α’ formation above approximately 10-5 dpa/s, while electron irradiation, with weak mixing, had little effect at dpa rates up to 10-3 dpa/s. These model predictions are consistent with experiments. We explain the results in terms of the flux dependence of the radiation enhanced diffusion, cascade mixing, and their ratio, which all vary significantly in relevant flux ranges for neutron and cascade inducing ion irradiations. These results show that both cascade mixing and radiation enhanced diffusion must be accounted for when attempting to emulate neutron-irradiation effects using accelerated ion irradiations.

Ke, Jia-Hong↗

DOE OSTI2026

Crystal structure, magnetism, and specific heat of lightly depleted layered honeycomb oxides, Na$_2$(Ni$_{2-x}$D$_x$)TeO$_6$ ($D$ = Mg, Ga, Co; 0.10 ≤ $x$ ≤ 0.25)

Layered oxides, in which transition metal atoms form a honeycomb lattice, are known for complex magnetic phase diagrams. In this work we study the doped compounds, Na$_2$(Ni$_{2-x}$D$_x$)TeO$_6$, $D$ = Mg, Ga, and Co (0.10 ≤ $x$ ≤ 0.25), to understand how chemical dilution at the nickel site influences the stability of magnetic exchanges within the honeycomb layer of the parent, Na$_2$ Ni$_2$ TeO$_6$. Here, the studied compounds were found to crystallize in $P6_3/mcm$ space group common to P2 type layered oxides. In general, the lattice parameters and the unit cell volume expanded with increased doping. The oxidation states determined from X-ray photoelectron spectroscopy were consistent with bond valence sum estimates, that confirmed the presence of Ni$^{2+}$, Mg$^{2+}$, Ga$^{3+}$, Co$^{2+}$ in our samples. Irrespective of magnetic or non-magnetic doping, the magnetic phase transition temperature ($T_N$) of the doped compounds were reduced from that of Na$_2$ Ni$_2$ TeO$_6$ or Na$_2$ Co$_2$ TeO$_6$, and lay between 21.7 K and 26.8 K. The effective paramagnetic moments extracted from Curie–Weiss analysis were in the range 3.17 μ B to 3.84 μ B and the Weiss temperatures were between $-15$ K and $-25$ K, suggesting antiferromagnetism. Mg- and Ga-doped compounds showed free spin formation, indicated by Curie–Weiss tails in their magnetic susceptibility. Our results suggest emergence of short-range magnetic correlations in Na$_2$(Ni$_{2-x}$D$_x$)TeO$_6$, enhanced due to the depletion of the Ni honeycomb lattice.

75 - CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY A↗

DOE OSTI2025

Isotopic mass effects of tritium-fueled high-performance TFTR supershots

An increase in total stored energy correlated with the addition of tritium fuel was observed in supershots during the TFTR DT campaign. This supershot regime had strikingly high, centrally peaked ion and electron temperatures, and the largest neutron emission rates observed in TFTR. This paper presents a study of the causes of this increase in stored energy in supershots. Twenty-six supershots have been recently reanalyzed with the TRANSP plasma analysis code. Early TRANSP simulations did not accurately match the measured magnitude and time evolutions of the neutron emission rates. This mismatch is attributed to neglecting apparent increases of trace amounts of heavy impurities during neutral beam injection. The new TRANSP runs were tuned to accommodate this and match the measured global neutron emission rates. These new runs also had improved fidelity in predicting the time histories and radial dependencies of measured DT neutron emission rates. That in turn adds confidence in the simulated thermal deuterium and tritium density profiles that are needed for calculating the average hydrogenic atomic mass profiles. Six subsets of these supershots had well matched toroidal field B tor , plasma current I p , flux geometry, and total injected neutral beam power. The mix of D and T beam ions was varied for different discharges. The magnitude of the increase of the thermal ion energy W i with added tritium was relatively small, and the total W tot increase is dominated by the increase in fast beam ions with T. Analyses at times before the occurrences of deleterious MHD instabilities yielded scaling of W tot with the volume-average isotopic mass consistent with previous publications. The relative fraction of fast energy ions is expected to be small in practical tokamak reactors. Thus the increase in stored energy W tot observed in TFTR supershots does not appear likely to be significantly helpful for producing useful fusion energy.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

NASA NTRS1990

Comparison of super-high-energy-propulsion-systems based on metallic hydrogen propellant for ES to LEO space transportation

The application is studied of metallic H2 as a rocket propellant, which contains a specific energy of about 52 kcal/g in theory yielding a maximum specific impulse of 1700 s. With the convincing advantage of having a density 14 times that of conventional liquid H2/liquid O2 propellants, metallic H2 could satisfy the demands of advanced launch vehicle propulsion for the next millennium. Provided that there is an atomic metallic state of H2, and that this state is metastable at ambient pressure, which still is not proven, the results are given of the study of some important areas, which concern the production of metallic H2, the combustion, chamber cooling, and storage. The results show that the use of metallic H2 as rocket propellant could lead to revolutionary changes in space vehicle philosophy toward small size, small weight, and high performance single stage to orbit systems. The use of high metallic H2 mass fractions results in a dramatic reduction of required propellant volume, while gas temperatures in the combustion chamber exceed 5000 K. Furthermore, it follows, that H2 (liquid or slush) is the most favorable candidate as working fluid. Jet generated noise due to high exhaust velocities could be a problem.

Thierschmann, M.↗

DOE OSTI2020

Damage initiation and evolution in Al-Si layered microstructures under shock loading conditions at atomic scales

Designing materials with microstructural features like multiphase interfaces have shown significant promise for usage in the next generation defense and nuclear applications. The dynamic response of these interfaces in extreme environments is observed to vary with the deformability of individual phases, which could subsequently alter the favored damage nucleation sites related to spall failure. Here, we investigate the role of spacing of interfaces in a nanocrystalline layered Aluminum-Silicon system on the shock wave propagation behavior, and microstructural and defect evolution using classical molecular dynamics simulations. The simulations are carried out with different hypothetical Al/Si microstructures including variations in the distribution of Si grains as layers in a nanocrystalline Al matrix. The molecular dynamics simulations suggest that spall failure is preferentially initiated at Al/Si interfaces. In addition, for the same system volume and same concentration of Si, a higher number of layers is marked by an increase in shock wave velocity and reduced resistance to spall failure.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Flow and thermal modelling of the argon volume in the DarkSide-20k TPC

The DarkSide-20k dark matter experiment, currently under construction at LNGS, features a dual-phase time projection chamber (TPC) with a ∼ 50 t argon target from an underground well. At this scale, it is crucial to optimise the argon flow pattern for efficient target purification and for fast distribution of internal gaseous calibration sources with lifetimes of the order of hours. To this end, we have performed computational fluid dynamics simulations and heat transfer calculations. The residence time distribution shows that the detector is well-mixed on time-scales of the turnover time (∼ 40 d). Notably, simulations show that despite a two-order-of-magnitude difference between the turnover time and the half-life of 83m Kr of 1.83 h, source atoms have the highest probability to reach the centre of the TPC 13 min after their injection, allowing for a homogeneous distribution before undergoing radioactive decay. We further analyse the thermal aspects of dual-phase operation and define the requirements for the formation of a stable gas pocket on top of the liquid. We find a best-estimate value for the heat transfer rate at the liquid-gas interface of 62 W with an upper limit of 144 W and a minimum gas pocket inlet temperature of 89 K to avoid condensation on the acrylic anode. This study also informs the placement of liquid inlets and outlets in the TPC. The presented techniques are widely applicable to other large-scale, noble-liquid detectors.

47 OTHER INSTRUMENTATION↗