Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Wind shear”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Downdrafts within High Plains cumulonimbi. I - General kinematic structure

Results from a comprehensive investigation in which observations from several case studies are integrated with three-dimensional cloud model results to examine the general kinematic structure of downdrafts associated with High Plains precipitating convection are presented. One particular downdraft type, the low-level precipitation-associated downdraft, is the focus of this paper. General airflow and trajectory patterns within low-level downdrafts are convergent from 0.8 km upwards to downdraft top, typically less than 5 km AGL. Observed mass flux profiles often increase rapidly with height as a result of strong buoyancy forcing below the melting level. Inflow to the low-level downdraft, although vertically continuous can be separated into two branches. The up-down branch originating within the planetary boundary layer initially rises up to 4 km and then descends within the main precipitation-associated downdraft. The midlevel branch, usually more pronounced during early downdraft stages, originates from above the PBL and transports low-valued theta sub e air to low levels. The depth of the low-level downdraft can be approximated by the environmental sounding transition level, defined as the vertical height interval separating conditionally unstable to neutral air below from roughly stable air above. The low-level downdraft is most frequently located along the upshear storm flank relative to the updraft, although a downshear downdraft may become common under higher environmental wind shear.

Knupp, Kevin R.↗

Gravity waves and convection in Colorado during July 1983

The dynamics of gravity-wave/convective-cell interaction is studied using NOAA data collected in NE Colorado during July and August 1983. The pressure fields measured with microbarographs, the tropospheric wind profiles obtained with a UHF wind profiler radar, and precipitation data collected with a 10-cm weather radar for four events (A, B, C, and D) are analyzed. The four disturbances are detected through a substantial depth of the troposphere. It is observed that in event A the wave and convective cells appear to be locked together; in event B, the wave and convective cells commence about the same time, but the wave velocities differ from the cell velocities; and in events C and D, the waves move faster than the maximum wind in the jet and faster than the convective cells. It is suggested that events A and B are generated by wind shear in the jet stream, and the excitation of events C and D depends on mechanisms such as vertical convective motion and acceleration in the jet flow.

Einaudi, F.↗

Ultraviolet Lidar Would Measure Wind Velocity

Incoherent Doppler-shifted scattering from aerosols reveals important weather data. Remote-sensing system in early stage of development makes global measurements of wind velocities along probing beam of ultraviolet light. In aviation system promotes safety through detection of wind shears and clear-air turbulence. System includes range-gated ultraviolet-excimer laser operating at 308 or 353 nm.

Mcdermid, Iain Stuart↗

Investigation of air transportation technology at Princeton University, 1986

The Air Transportation Technology Program at Princeton proceeded along four avenues: Guidance and control strategies for penetration of microbursts and wind shear; Application of artificial intelligence in flight control systems; Computer aided control system design; and Effects of control saturation on closed loop stability and response of open loop unstable aircraft. Areas of investigation relate to guidance and control of commercial transports as well as general aviation aircraft. Interaction between the flight crew and automatic systems is a subject of prime concern.

Stengel, Robert F.↗

Flight-management strategies for escape from microburst encounters

An effort is underway by NASA, FAA, and industry to reduce the threat of convective microburst wind shear phenomena to aircraft. The goal is to develop and test a candidate set of strategies for recovery from inadvertent microburst encounters during takeoff. Candidate strategies were developed and evaluated using a fast-time simulation consisting of a simple point-mass performance model of a transport-category airplane and an analytical microburst model. The results indicate that the recovery strategy characteristics that best utilize available airplane energy include an initial reduction in pitch attitude to reduce the climb rate, followed by an increase in pitch up to the stick shaker angle of attack. The stick shaker angle of attack should be reached just as the airplane is exiting the microburst. The shallowest angle of climb necessary for obstacle clearance should be used. If the altitude is higher than necessary, an intentional descent to reduce the airspeed deceleration should be used. Of the strategies tested, two flight-path-angle based strategies had the highest recovery altitudes and the least sensitivity to variations in the encounter scenarios.

Hinton, David A.↗

Airborne radar technology for windshear detection

The objectives and accomplishments of the two-and-a-half year effort to describe how returns from on-board Doppler radar are to be used to detect the presence of a wind shear are reported. The problem is modeled as one of first passage in terms of state variables, the state estimates are generated by a bank of extended Kalman filters working in parallel, and the decision strategy involves the use of a voting algorithm for a series of likelihood ratio tests. The performance issue for filtering is addressed in terms of error-covariance reduction and filter divergence, and the performance issue for detection is addressed in terms of using a probability measure transformation to derive theoretical expressions for the error probabilities of a false alarm and a miss.

Hibey, Joseph L.↗

Space Transportation System Meteorological Expert

The STS Meteorological Expert (STSMET) is a long-term project to acquire general Shuttle operational weather forecasting expertise specific to the launch locale, to apply it to Shuttle operational weather forecasting tasks at the Cape Canaveral Forecast Facility, and ultimately to provide an on-line real-time operational aid to the duty forecasters in performing their tasks. Particular attention is given to the development of an approach called scenario-based reasoning, with specific application to summer thunderstorms; this type of reasoning can also be applied to frontal weather phenomena, visibility including fog, and wind shear.

Beller, Arthur E.↗

Ascent structural wind loads for the National Space Transportation System (NSTS)

An aerospace vehicle must withstand the design ascent structural load or be within any flight constraint to safely reach orbit. For the NSTS an assessment for flight readiness is made for each mission. This assessment for ascent loads and performance parameters is stated in terms of launch probability derived from samples of Jimsphere wind profiles. For the day of launch operations an allowance is made for the ascent load variability due to the wind profile variability over a 3.5-hour period. This is the current time period required to obtain a Jimsphere measurement and perform a complete load simulation prior to launch time. The load variability is derived from a sample of 3.5-hour Jimsphere wind profile pairs. It is applied as a conditional percentile value given the wind load at 3.5 hours prior to launch time. Probability models are used for these analyses. Application of the univariate, bivariate and conditional forms of the extreme value (Gumbel) probability distribution to the analysis of extreme wind speeds, wind shears and vehicle loads is described.

Smith, O. E.↗

A scalar/vector potential formulation of an airfoil in nonuniform stream

A recent innovation in aerodynamic calculation techniques is the formulation based upon scalar and vector potentials (Stokes-Helmholtz decomposition) for the velocity field. This technique is presented: an implementation involving classical panel method is studied. The application of interest is to two-dimensional airfoils moving into a nonuniform approach flow. Comparisons with theoretical and numerical results are included. Furthermore the variations of lift and moment coefficients of quasi-steady simulated flight of an airfoil through microburst wind shear data are studied.

Wang, J. C. A.↗

Numerical simulation of polar lows and comma clouds using simple dry models

Linear and nonlinear numerical channel models are used to simulate polar low/comma cloud evolution. The basic state of the model is idealized and can be specified analytically. It has strong horizontal as well as vertical wind shear and implicitly includes the effect of sensible heat fluxes from the lower boundary. This is done by having a layer of reduced stability present in the lower troposphere. The results of the linear model study are presented and used to provide input for the nonlinear model integration. It is shown that, given sufficient horizontal resolution, many features of polar low/comma clouds can be simulated by the nonlinear primitive equations model and the idealized basic state, in particular a rapidly growing disturbance with a wavelength on the order of 1000 km.

Mudrick, Stephen E.↗

The GISS global climate-middle atmosphere model. I - Model structure and climatology

A coupled global climate/middle atmosphere model (GCMAM) is developed by extending the Hansen et al. (1983) GISS global climate model to include the middle atmosphere up to 85 km. The model includes numerical solutions of the primitive equations, calculations of the radiative and surface fluxes, and a complete hydrologic cycle with convective and cloud-cover parameterizations. In addition, a parameterized gravity wave drag cycle is incorporated, in which gravity-wave momentum fluxes due to flow over topography, wind shear, and convection are calculated at each grid box, using theoretical relationships between the grid-scale variables and expected source strengths. The results of the GCMAM demonstrate that the model produces a reasonable simulation of the stratosphere. It is shown that the improvements over the previous version were achieved largely through the incorporation of the parameterized gravity wave drag.

Rind, D.↗

Quasi-steady flight to quasi-steady flight transition for abort landing in a windshear - Trajectory optimization and guidance

Trajectory optimization and trajectory-guidance problems for abort-landing maneuvers in the presence of low-altitude wind shear are investigated by means of numerical simulations, with a focus on methods designed to achieve quasi-steady flight recovery (final values of the relative velocity, path inclination, and angle of attack equal to those for quasi-steady steepest climb). The derivation of the governing equations is outlined; the modeling techniques are explained; and results for a B-727 transport aircraft approaching a sea-level airfield at temperature 100 F are presented in extensive tables and graphs and characterized in detail. The techniques developed are shown to be effective in restoring the aircraft to stable quasi-steady flight.

Miele, A.↗

Operational implications of a cloud model simulation of space shuttle exhaust clouds in different atmospheric conditions

A three-dimensional cloud model was used to characterize the dominant influence of the environment on the Space Shuttle exhaust cloud. The model was modified to accept the actual heat and moisture from rocket exhausts and deluge water as initial conditions. An upper-air sounding determined the ambient atmosphere in which the cloud would grow. The model was validated by comparing simulated clouds with observed clouds from four actual Shuttle launches. Results are discussed with operational weather forecasters in mind. The model successfully produced clouds with dimensions, rise, decay, liquid water contents, and vertical motion fields very similar to observed clouds whose dimensions were calculated from 16 mm film frames. Once validated, the model was used in a number of different atmospheric conditions ranging from very unstable to very stable. Wind shear strongly affected the appearance of both the ground cloud and vertical column cloud. The ambient low-level atmospheric moisture governed the amount of cloud water in model clouds. Some dry atmospheres produced little or no cloud water. An empirical forecast technique for Shuttle cloud rise is presented and differences between natural atmospheric convection and exhaust clouds are discussed.

Zak, J. A.↗

A cloud model simulation of space shuttle exhaust clouds in different atmospheric conditions

A three-dimensional cloud model was used to characterize the dominant influence of the environment on the Space Shuttle exhaust cloud. The model was modified to accept the actual heat and moisture from rocket exhausts and deluge water as initial conditions. An upper-air sounding determined the ambient atmosphere in which the cloud could grow. The model was validated by comparing simulated clouds with observed clouds from four actual Shuttle launches. The model successfully produced clouds with dimensions, rise, decay, liquid water contents and vertical motion fields very similar to observed clouds whose dimensions were calculated from 16 mm film frames. Once validated, the model was used in a number of different atmospheric conditions ranging from very unstable to very stable. In moist, unstable atmospheres simulated clouds rose to about 3.5 km in the first 4 to 8 minutes then decayed. Liquid water contents ranged from 0.3 to 1.0 g kg-1 mixing ratios and vertical motions were from 2 to 10 ms-1. An inversion served both to reduce entrainment (and erosion) at the top and to prevent continued cloud rise. Even in the most unstable atmospheres, the ground cloud did not rise beyond 4 km and in stable atmospheres with strong low level inversions the cloud could be trapped below 500 m. Wind shear strongly affected the appearance of both the ground cloud and vertical column cloud. The ambient low-level atmospheric moisture governed the amount of cloud water in model clouds. Some dry atmospheres produced little or no cloud water. One case of a simulated TITAN rocket explosion is also discussed.

Chen, C.↗

Wave/current interaction model

The wave-current interaction for the application to remote sensing data via numerical simulations and data comparison is modelled. Using the field data of surface current shear, wind condition and ambient wave spectrum, the numerical simulations of directional wave spectrum evolution were used to interpret and to compare with the aircraft data from Radar Ocean Wave Spectrometer (ROWS) and Surface Contour Radar (SCR) across the front during Frontal Air Sea Interaction Experiment (FASINEX). The wave-ice interaction was inspired by the observation of large amplitude waves hundreds of kms inside the ice pack in the Weddell Sea, resulting in breakup of the ice pack. The developed analysis of processes includes the refraction of waves at the pack edge, the effects of pack compression on wave propagation, wave train stability and buckling stability in the ice pack. Sources of pack compression and interaction between wave momentum and pack compression are investigated. Viscous camping of propagating waves in the marginal ice zone are also studied. The analysis suggests an explanation for the change in wave dispersion observed from the ship and the sequence of processes that cause ice pack breakup, pressure ridge formation and the formation of open bands of water.

Liu, A. K.↗

Dynamics of the middle atmosphere in winter (Dynamics). Interrelation between the different variations of turbulent diffusion and ionospheric absorption originating in the middle atmosphere

The turbulent diffusion coefficient was computed from the parameters of sporadic E layers using the wind shear theory of midlatitude sporadic E and models of the ionosphere as well as that of the neutral upper atmosphere. The turbulent diffusion coefficient obtained for the period of circulation disturbances associated with stratospheric warmings and for the intervals of the winter anomaly indicate changes similar to the ionospheric absorption of radio waves, in the former case decreased, in the latter case increased values. This may hit at the role of turbulent transport in the formation of these anomalies. On the basis of these findings, a seasonal variation of the turbulent diffusion coefficient having a minimum in summer and an increase of this parameter with increasing geomagnetic activity are anticipated.

Bencze, P.↗

Comparison of satellite IR rain estimates with radar rain observations in hurricanes

Radar-observed rainrates and rain areas obtained for the Hurricanes Frederic (1979), Alicia (1983), and Diana (1984) were used in conjunction with GOES IR data to examine the validity of three satellite IR rain estimation techniques: the Arkin (1983) method, the Negri-Adler-Wetzel (1984) technique, and the convective-stratiform technique of Adler and Negri (1987). The Alicia hurricane was also monitored using the subjective manual technique of Spayd and Scofield (1984). It is shown that the success of IR techniques in identifying areas of rainfall depends on the hurricane feature being addressed. Thus, the three objective IR techniques were unable to identify the locations of radar-observed eyewall and inner band precipitation areas because of strong vertical wind shear in the eyewall and the lack of the vertical extent of stratiform precipitation beneath the central dense overcast.

Morris, K. Robert↗

Modeling of dynamic effects of a low power laser beam

Methods of modeling some of the dynamic effects involved in laser beam propagation through the atmosphere are addressed with emphasis on the development of simple but accurate models which are readily implemented in a physical optics code. A space relay system with a ground based laser facility is considered as an example. The modeling of such characteristic phenomena as laser output distribution, flat and curved mirrors, diffraction propagation, atmospheric effects (aberration and wind shear), adaptive mirrors, jitter, and time integration of power on target, is discussed.

Lawrence, George N.↗