Results for “WOUNDS” — Page 36

NASA NTRS2017

Development of a Novel Space Flight Plan to Monitor Female Mice Fertility Using Reduced Crew Time

Ovarian estrogen impacts the normal homeostatic and metabolic processes of all tissues and organ systems within the body: particularly, but not limited to canonical space-flight impacted systems: bone, muscle, immune, wound repair, and cardiovascular. Effects of space flight on the ovarian estrogen production are therefore critical to our understanding of all space flight experiments using female mice, the current paradigm being used on the International Space Station (ISS). Recently, we demonstrated that vaginal wall histology could be used to determine the stage of the estrous cycle in female mice at the time of sacrifice in space. Moreover, this robust technique was completed following two post-flight freezethaw procedures of the carcasses (RR1 experiment). Thus, this technique represents a viable mechanism to determine the estrous cycle status of the female at the time of sacrifice and can be completed in a manner that does not impact primary experimental objectives. We propose that vaginal wall histology become a standard procedure completed on all mice sacrificed in space and that the individual estrous status of each animal be shared with all investigators. While evidence of estrous cyclicity was present in long-term (33 day) RR1 mice, fertility of female mice exposed to weightlessness remains unknown. In preparation for an upcoming funded NASA flight investigating the effects of long duration spaceflight on female fertility, we have refined our experimental design to minimize crew flight time and to accommodate the duration of Dragon capsule berth. These refinements maintain all our proposed primary and secondary experimental objectives. Briefly, in order to evaluate fertility, we will super ovulate mice using standard procedures (PMSG hCG), followed by collection of reproductive tract after follicular stimulation alone (PMSG) or following ovulation (hCG). Ovarian folliculogenesis and ovulation rate will be determined in fixed tissues following return in order to determine fertility. Ovarian and uterine tissues will also be evaluated by hormonal and gene expression profiling using quantitative approaches (radioimmunoassays, western blots, digital droplet PCR). Comparisons will be made to contemporary vivarium and Rodent Research Hardware Transporter and Habitat housed animals maintained on earth. Supported by NNX15AB48G to JST.

Christenson, Lane↗

NASA NTRS2017

VESsel GENeration Analysis (VESGEN): Innovative Vascular Mappings for Astronaut Exploration Health Risks and Human Terrestrial Medicine

Currently, astronauts face significant health risks in future long-duration exploration missions such as colonizing the Moon and traveling to Mars. Numerous risks include greatly increased radiation exposures beyond the low earth orbit (LEO) of the ISS, and visual and ocular impairments in response to microgravity environments. The cardiovascular system is a key mediator in human physiological responses to radiation and microgravity. Moreover, blood vessels are necessarily involved in the progression and treatment of vascular-dependent terrestrial diseases such as cancer, coronary vessel disease, wound-healing, reproductive disorders, and diabetes. NASA developed an innovative, globally requested beta-level software, VESsel GENeration Analysis (VESGEN) to map and quantify vascular remodeling for application to astronaut and terrestrial health challenges. VESGEN mappings of branching vascular trees and networks are based on a weighted multi-parametric analysis derived from vascular physiological branching rules. Complex vascular branching patterns are determined by biological signaling mechanisms together with the fluid mechanics of multi-phase laminar blood flow.

astronaut↗

NASA NTRS2017

Autonomous Laser-Powered Vehicle

An autonomous laser-powered vehicle designed to autonomously penetrate through ice caps of substantial (e.g., kilometers) thickness by melting a path ahead of the vehicle as it descends. A high powered laser beam is transmitted to the vehicle via an onboard bare fiber spooler. After the beam enters through the dispersion optics, the beam expands into a cavity. A radiation shield limits backscatter radiation from heating the optics. The expanded beam enters the heat exchanger and is reflected by a dispersion mirror. Forward-facing beveled circular grooves absorb the reflected radiant energy preventing the energy from being reflected back towards the optics. Microchannels along the inner circumference of the beam dump heat exchanger maximize heat transfer. Sufficient amount of fiber is wound on the fiber spooler to permit not only a descent but also to permit a sample return mission by inverting the vehicle and melting its way back to the surface.

Stone, William C.↗

NASA NTRS2018

Preliminary Design of the Superconducting Rotor for NASA's High-Efficiency Megawatt Motor

NASA Glenn Research Center is developing a 1.4~MW high-efficiency electric machine for future electrified aircraft to reduce energy consumption, emissions, and noise. This wound-field, synchronous machine employs a self-cooled, superconducting rotor to achieve excellent specific power and efficiency. The design of the superconducting rotor and the optimization of its electromagnetic and structural responses are analyzed in this paper. Candidate designs are evaluated in terms of absolute performance, specific performance, and performance per cost. It is found that optimizing the electromagnetic response for absolute or specific performance yields designs that are similar to each other, but opposite of the cost-optimized design. A method to define the thermal requirements of the superconducting coils and integrated cryocooler is also presented.

electric machines↗

NASA NTRS2018

Design, Fabrication, and Critical Current Testing of No-Insulation Superconducting Rotor Coils for NASA's 1.4 MW High-Efficiency Megawatt Motor

NASA Glenn Research Center is developing a 1.4 MW high-efficiency electric machine for future electrified aircraft to reduce energy consumption, emissions, and noise. This wound-field, synchronous machine employs a self-cooled, superconducting rotor to achieve excellent specific power and efficiency. This paper discusses the design and fabrication of the no-insulation high temperature superconducting (HTS) rotor coils and compares them to conventionally insulated HTS coils. Two sub-scale test coils with epoxy on only one axial face were fabricated. Critical current testing of the coils at 77 K and self field was conducted to study the influence of thermal cycling on their critical current and n-value. After two or four aggressive thermal cycles between 77 K and about 278 K (5 degree C), the critical current and n-value were nearly unchanged, indicating very little to no degradation.

electric aircraft propulsion↗

NASA NTRS2018

Preliminary Design of the Superconducting Rotor for NASA's High-Efficiency Megawatt Motor

NASA Glenn Research Center is developing a 1.4 MW high-efficiency electric machine for future electrified aircraft to reduce energy consumption, emissions, and noise. This wound-field, synchronous machine employs a self-cooled, superconducting rotor to achieve excellent specific power and efficiency. The design of the superconducting rotor and the optimization of its electromagnetic and structural responses are analyzed in this paper. Candidate designs are evaluated in terms of absolute performance, specific performance, and performance per cost. It is found that optimizing the electromagnetic response for absolute or specific performance yields designs that are similar to each other, but opposite of the cost-optimized design. A method to define the thermal requirements of the superconducting coils and integrated cryocooler is also presented.

Scheidler, Justin↗

NASA NTRS2018

Biomedical Science and Technology on the International Space Station - Benefits for Humanity (Ciencia Y Tecnologia Biomedica En La Estacion Espacial Internacional - Beneficios Para La Humanidad)

The International Space Station is a unique laboratory for performing investigations that affect human health both in space and on Earth. During its time in orbit, the space station has enabled research that is providing a better understanding of many aspects of human health including aging, trauma, disease and environmental impacts. Driven by the need to support astronaut health, several biological and human physiological investigations have yielded important results that we on Earth can also benefit from. These results include new ways to mitigate bone loss, insights into bacterial behavior, and innovative wound-healing techniques. Advances in telemedicine, disease models, psychological stress response systems, nutrition and cell behavior are just a few more examples of the benefits that have been gained from applying studies in orbit to human health back on Earth.

Love, John E.↗

NASA NTRS2018

Design, Fabrication, and Critical Current Testing of No-Insulation Superconducting Rotor Coils for NASA's High-Efficiency Megawatt Motor

NASA Glenn Research Center is developing a 1.4~MW high-efficiency electric machine for future electrified aircraft to reduce energy consumption, emissions, and noise. This wound-field, synchronous machine employs a self-cooled, superconducting rotor to achieve excellent specific power and efficiency. This paper discusses the fabrication of the no-insulation high temperature superconducting (HTS) coils and presents the lessons learned. The process is compared to the fabrication of conventionally insulated HTS coils. Testing of the coils' critical current at liquid nitrogen temperature is also presented. The influence of thermal cycling on the critical current and n-value is studied.

Scheidler, Justin J.↗

NASA NTRS2019

Progress Toward the Critical Design of the Superconducting Rotor for NASA's 1.4 MW High-Efficiency Electric Machine

NASA Glenn Research Center is developing a 1.4 MW high-efficiency electric machine for future electrified aircraft to reduce energy consumption, emissions, and noise. This wound-field, synchronous machine employs a self-cooled, superconducting rotor to achieve excellent specific power and efficiency. This paper presents the progress made over the past year toward a critical design of the superconducting rotor, including refined analysis and risk reduction testing on prototype superconducting coils. A 3D finite element model of the rotor is developed to simulate the combined loading imposed by the initial cool down of the rotor from room temperature to cryogenic temperature and the subsequent rotation of the rotor up to the design speed. The model is evaluated to better predict the stress state in the critical components and the reduction in physical gap between the stator and rotor due to the resulting radial deflections. This model includes an enhanced model of the superconducting coil that considers the coil as an assembly of four individual coil layers. An improved coil fabrication process is described in detail. Two sub-scale test coils are fabricated and then tested under repeated thermal cycling between room temperature and liquid nitrogen temperature (77 K). It is demonstrated that the proposed coil fabrication procedure can produce no-insulation, high temperature superconducting coils that can survive several thermal cycles without apparent degradation.

electric machines↗

NASA NTRS2019

Progress Toward the Critical Design of the Superconducting Rotor for NASA's 1.4 MW High Efficiency Electric Machine

NASA Glenn Research Center is developing a 1.4 MW high-efficiency electric machine for future electrified aircraft to reduce energy consumption, emissions, and noise. This wound-field, synchronous machine employs a self-cooled, superconducting rotor to achieve excellent specific power and efficiency. This paper presents the progress made over the past year toward a critical design of the superconducting rotor, including refined analysis and risk reduction testing on prototype superconducting coils. A 3D finite element model of the rotor is developed to simulate the combined loading imposed by the initial cool down of the rotor from room temperature to cryogenic temperature and the subsequent rotation of the rotor up to the design speed. The model is evaluated to better predict the stress state in the critical components and the reduction in physical gap between the stator and rotor due to the resulting radial deflections. This model includes an enhanced model of the superconducting coil that considers the coil as an assembly of four individual coil layers. An improved coil fabrication process is described in detail. Two sub-scale test coils are fabricated and then tested under repeated thermal cycling between room temperature and liquid nitrogen temperature (77 K). It is demonstrated that the proposed coil fabrication procedure can produce no-insulation, high temperature superconducting coils that can survive several thermal cycles without apparent degradation.

Scheidler, Justin↗

NASA NTRS2020

A Brief Overview of the Effects of Impact Damage to Rocket Motor Cases

This Technical Memorandum (TM) presents pertinent results from past experimental work concerning impact damage to composite rocket motor cases. A rocket motor case in this TM refers to filament-wound pressure vessels of a substantial size intended to be used for launch vehicles, such as the new Space Launch System (SLS) rocket. In the early 1980s, as carbon fiber composites were becoming increasingly used on aircraft, concerns about the effects of foreign object impact damage grew, since the compressive strength properties of these composites could be severely affected by impact damage. The tensile properties were not as affected by foreign object impact damage which is fortunate for rocket motor cases as they are driven by tensile loads (burst strength). While great improvements to both carbon fibers and resins have resulted in far superior toughness values compared to the early generation of carbon/epoxy systems, the stigma of composite rocket motor cases being easily damaged and the burst strength compromised persists.

impact damage↗

NASA NTRS2000

Cycling and Low Temperature Performance of Li Ion Cells

Lithium-ion cells, of DD and D size, are being developed under a contract with the USAF for NASA's Mars Rover Missions. The cells contain spirally wound electrodes of LiNi02 positive electrode material and graphite anode in cylindrical stainless steel hardware.

Li-Ion↗

NASA NTRSDate not supplied

Current Status and Future Plans for Electric Motors and Drives at NASA

Current Status and Future Plans for Electric Motors and Drives at NASA: Our work advances propulsion for aircraft while reducing energy consumption, noise, emissions and the cost of air travel. We are committed to investigating the use of alternative energy sources and improving the safety and expediency of flight. Electrified Aircraft Propulsion (EAP) is the use of propulsors (propellers or fans) driven by electric motors to propel aircraft ranging from air taxis to subsonic transports. NASA is developing technology, aircraft concepts, test aircraft, and ground test facilities to turn this idea from science fiction to reality. Specifically, motors and/or generators (Electric machines) are needed on all electrified aircraft. And NASA is sponsoring or performing work to achieve power densities 2-3 times the state of the art for machines in the MW or larger class. Three major machine types are being developed: permanent magnet, induction, and wound field. Power converters are also an essential component in most EAP aircraft concepts, as they are used to convert from ac to dc power, or vice versa. Silicon carbide and gallium nitride convertors are being developed with conventional cooling as well as a cryogenically cooled converter. Future plans include demonstrating integrated flight-ready systems in both ground and flight tests; collaborating with and leveraging ARPA-E EAP programs; and supporting FAA standards development for market acceptance and safety.

Powertrain↗

NASA NTRSDate not supplied

Lightweight Thrust Chamber Composite Overwrap Lessons Learned

The manufacturing, design, and analysis of filament wound carbon fiber/polymer composite overwraps for additively manufactured, copper combustion chambers are a critical part of NASA’s Rapid Analysis and Manufacturing Propulsion Technology (RAMPT) project. Ideally, the composite overwrap acts as a light-weight structural jacket and allows significant weight reduction of the high pressure thrust chamber assembly, reduction of overall cost, and reduced fabrication schedules. Chamber assemblies for 2000 lb. (2k) and 7000 lb. (7k) of thrust have been successfully tested at NASA’s Marshall Space Flight Center. Multiple lessons were learned throughout the overwrap process development and manufacturing trials. The lessons learned on small scale hardware, such as the 2k and 7k chambers, will guide further composite manufacturing technologies and enable a progression to larger scale assemblies with greater structural loads. Material performance requirements, manufacturing process development, and surface preparation were evaluated during the small chamber trials, with the broad thermal requirements of the resin being the primary driver for material selection and processing. Both epoxy and bismaleimide (BMI) materials were evaluated with respect to both performance in the hot-fire test and ease of fabrication. Separately, surface preparation procedures were studied with the goal of providing a smooth chamber surface to promote a non-bonded overwrap. Recent testing of the 7k trust chamber has provided data in Non-Destructive Evaluation (NDE) and processing in order to continue to evaluate the performance requirements stated.

Allison Clark↗

NASA NTRSDate not supplied

Immunological Consequences of the Spaceflight Environment on Macrophage Function

The role of macrophages in the protection of multicellular organisms is critical and multifaceted.Regulation of macrophage populations and functions is key to maintaining tissue home ostasis and a healthy organism. As the bridge between the innate and adaptive immune systems, macrophages patrol every tissue in the body and show remarkable heterogeneity. Primarily, macrophages phagocytose harmful pathogens and release cytokines to regulate pro-inflammatory responses to infections and anti-inflammatory responses for wound healing. Prior research has demonstrated that spaceflight conditions, including microgravity and deep space radiation, have a detrimental effect on macrophage populations and functions. However, tissue-specific and individual spaceflight stressor-specific effects remain to be untangled. Furthermore, prior research into the effects of spaceflight on macrophages lacks experimental standardization, creating difficulty in reconciling disparate studies. Finally, due to their presence in various human tissues, easy accessibility in the bloodstream, and fast responses to immune status and spaceflight, macrophages present a unique opportunity for developing new diagnostic tools for spaceflight applications. Therefore, further targeted research on macrophage functions may support astronaut health in long-duration crewed space missions, both within and beyond lowEarth orbit. Here we present a review that summarizes previous findings on macrophagedys regulation in spaceflight, details key areas for further research and investment, and recommends potential investigations into spaceflight dysfunctions, diagnostics, and countermeasures.

immunology↗

NASA NTRS2021

A Short Glossary of Inclusive Language

Words matter—that old adage that many of us may have heard as children, Sticks and stones may break my bones, but words will never hurt me, is a harmful fallacy. In reality, the language we use has tremendous power to alienate, exclude, deride, humiliate, and wound. On the other hand, thoughtful use of language can signal openness, inclusivity, admiration, and celebration, or simply be an expression of empathy and care for our fellow humans. As part of The Oceanography Society (TOS) Justice, Equity, Diversity, and Inclusion Committee’s series of columns in Oceanography, here we provide a glossary of terms that are often used while discussing topics such as race, ethnicity, gender, sexual orientation, and gender identity. It should be explicitly stated that this list is neither definitive nor exhaustive. Indeed, the terms included here are likely heavily influenced by the authors’ own lived experiences and the lenses through which we see the world. Language is a living entity, a fluid social construct subject to rapid changes and overlaid with regional nuances. Indeed, what may be accurate and acceptable terminology for one person may be entirely unacceptable for another. Keeping this in mind, the following glossary is an attempt to group together some of the acronyms and phrases that are most commonly used today in social justice studies and bodies of work and that may have particular relevance to our community of ocean-related scientists, technologists, and stakeholders. We have borrowed heavily from a wide range of excellent existing scholarship and activism and have cited all sources used. We encourage the reader to follow the links to these multimedia resources and, perhaps, use them as teaching and discussion materials with your students, colleagues, and mentees. Finally, it is our hope that this glossary, along with the links provided to more comprehensive definitions and discussions, helps to define terms that you may have heard used, but not understood, and that it will serve to remind us of the power of the words we use in our everyday professional and personal lives. We begin by defining the very words that form the name of our committee: Justice, Equity, Diversity, and Inclusion (JEDI)

Susanne E. Craig↗

NASA NTRSDate not supplied

Current Status and Future Plans for Electric Motors and Drives at NASA

Our work advances propulsion for aircraft while reducing energy consumption, noise, emissions and the cost of air travel. We are committed to investigating the use of alternative energy sources and improving the safety and expediency of flight. Electrified Aircraft Propulsion (EAP) is the use of propulsors (propellers or fans) driven by electric motors to propel aircraft ranging from air taxis to subsonic transports. NASA is developing technology, aircraft concepts, test aircraft, and ground test facilities to turn this idea from science fiction to- reality. Specifically, motors and/or generators (Electric machines) are needed on all electrified aircraft. And NASA is sponsoring or performing work to achieve power densities 2-3 times the state of the art for machines in the MW or larger class. Three major machine types are being developed: permanent magnet, induction, and wound field. Power converters are also an essential component in most EAP aircraft concepts, as they are used to convert from ac to dc power, or vice versa. Silicon carbide and gallium nitride convertors are being developed with conventional cooling as well as a cryogenically cooled converter. Future plans include demonstrating integrated flight-ready systems in both ground and flight tests; collaborating with and leveraging ARPA-E EAP programs; and supporting FAA standards development for market acceptance and safety.

Aircraft↗

NASA NTRSDate not supplied

Looking into Ocular Risks of Spaceflight through the Mouse Retina

Ocular alterations have been observed at anatomical levels in astronauts on long duration spaceflight missions, such as what would be required for missions to Mars. These alterations cause an array of signs which together constitute the Spaceflight-Associated Neuro-ocular Syndrome (SANS), one of the top risk priorities of the NASA Human Research Program. Not much is known about SANS at the cellular and molecular level, but studies in mice and rats have recently begun to yield observations on how the spaceflight environment might affect the eye’s biology. Preliminary data from shuttle mouse experiments, and more recently experiments on ISS, have shown changes in retinal physiology via histology and gene expression analysis. This study utilizes samples from the CASIS sponsored Rodent Research 8 Experiment (RRRM-1) tissue sharing opportunity, delivered to the ISS by SpaceX CRS-16 on 12/08/2018. Female BALB/cAnNTac mice were on the ISS for 45 days, while ground controls consisted ofa standard vivarium group and spaceflight habitat group. Here we investigate the molecular response of the mouse retina to identify genes and pathways affected by spaceflight conditions using histology and transcriptomic RNAseq data. This Differentially Expressed Gene (DEG) data was used for pathway analysis with Galaxy (Genelab) and Ingenuity Pathway Analysis (IPA). We identified pathways related to neuronal differentiation, cellular transport/movement, and wound healing. Some of the top DEGs have known relation to ophthalmic diseases. Though there were DEGs throughout the comparisons we tested, there was no clear effect of spaceflight. This could be due to sample processing, which required mice to be returned to Earth about a day before they were sacrificed, possibly allowing for readaptation affecting the retinal transcriptome. However, there was a clear effect of age, between the young (10-12 weeks) and old (32 weeks) groups, and between the baseline and end of experiment, about 46 days.

SANS↗