Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WIRES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Depollution benchmarks for capacitors, batteries and printed wiring boards from waste electrical and electronic equipment (WEEE)

Highlights: • We’ve analysed data on the dismantling of electronic and electrical appliances. • Ten years of mass balance data of more than recycling companies have been considered. • Percentages of dismantled batteries, capacitors and PWB have been studied. • Threshold values and benchmarks for batteries and capacitors have been identified. • No benchmark for the dismantling of printed wiring boards should be set. - Abstract: The article compiles and analyses sample data for toxic components removed from waste electronic and electrical equipment (WEEE) from more than 30 recycling companies in Switzerland over the past ten years. According to European and Swiss legislation, toxic components like batteries, capacitors and printed wiring boards have to be removed from WEEE. The control bodies of the Swiss take back schemes have been monitoring the activities of WEEE recyclers in Switzerland for about 15 years. All recyclers have to provide annual mass balance data for every year of operation. From this data, percentage shares of removed batteries and capacitors are calculated in relation to the amount of each respective WEEE category treated. A rationale is developed, why such an indicator should not be calculated for printed wiring boards. The distributions of these de-pollution indicators are analysed and their suitability for defining lower threshold values and benchmarks for the depollution of WEEE is discussed. Recommendations for benchmarks and threshold values for the removal of capacitors and batteries are given.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Bright spots in 1 MA X pinches as a function of wire number and material

Bright, intense x-ray sources with extreme plasma parameters (micropinch plasmas) have previously been characterized at 0.1-0.4 MA, but the scaling of such sources at higher current is poorly understood. The x-ray source size and radiation power of 1 MA X pinches were studied as a function of wire material (Al, Ti, Mo, and W) and number (1-, 2-, 8-, 32-, and 64-wire configurations). The smallest bright spots observed were from 32-wire tungsten X pinches, which produced {<=}11-16 {mu}m, {approx}2 J, 1-10 GW sources of 3-5 keV radiation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Scaling of Radiation Parameters of Planar and Compact Cylindrical Wire Arrays at the 1 MA Zebra Generator

Analysis is presented on scaling of radiated x-ray power, energy and implosion timing of single planar wire arrays (SPWA), double planar wire array (DPWA), and compact cylindrical wire array (CCWA) loads (diameter is 3 and 6 mm) of Mo and W with respect to current peak (0.8-1.4 MA), mass and array dimensions at 100 ns current pulse. Such scaling investigations are important for understanding the potential of these loads as an ICF radiation source{sup 7}. These data are used to identify promising directions to pursue with regard to highest x-ray output, smallest load size, and most consistent shot-to-shot performance. It is shown that W SPWA and DPWA total energy yield and peak power increased near-quadratically with current. DPWA scans of inter-planar gaps from 1.5 mm to 9 mm show an output maximum at 1.5 mm with decreasing output for 6 mm and 9 mm. A DPWA width scan shows that radiation yields decrease slowly as the width is decreased, which may allow for more compact loads without significant sacrifice to the output radiation. A mass scan of several W loads show that the implosion timing increases with mass.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Development of a Discharge Channel upon Electric Explosion of a Wire in Interrupted- and Uninterrupted-Current Regimes

Experimental results on the electrical explosion of thin W, Cu and Ni wires with a current density of {approx}10{sup 12} A/m{sup 2}, a current rise rate (dI/dt){approx}40 A/ns and a current pulse with amplitude 9 kA are presented. The structures of the discharge channels developed in single wire explosions in air and vacuum using laser shadow and schlieren imaging have been studied under the condition that the current in the circuit was interrupted. A difference in the shock wave propagation in air and the expansion of the exploded wire dense core in interrupted- and uninterrupted-current regimes has been observed. Analysis of the optical images has been performed in a shunting breakdown scenario.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Negative excess noise in gated quantum wires

The electrical current noise of a quantum wire is expected to increase with increasing applied voltage. We show that this intuition can be wrong. Specifically, we consider a single channel quantum wire with impurities and with a capacitive coupling to a metallic gate, and find that its excess noise, defined as the change in the noise caused by the finite voltage, can be negative at zero temperature. This feature is present both for large (c>>c{sub q}) and small (c<<c{sub q}) capacitive coupling, where c is the geometrical and c{sub q} the quantum capacitance of the wire. In particular, for c>>c{sub q}, negativity of the excess noise can occur at finite frequency when the transmission coefficients are energy dependent, i.e. in the presence of Fabry-Perot resonances or band curvature. In the opposite regime c < or approx. c{sub q}, a non trivial voltage dependence of the noise arises even for energy independent transmission coefficients: at zero frequency the noise decreases with voltage as a power law when c<c{sub q}/3, while, at finite frequency, regions of negative excess noise are present due to Andreev-type resonances.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Study of the effect of current rise time on the formation of the precursor column in cylindrical wire array Z pinches at 1 MA

The limited understanding of the mechanisms driving the mass ablation rate of cylindrical wires arrays is presently one of the major limitations in predicting array performance at the higher current levels required for inertial confinement fusion (ICF) ignition. Continued investigation of this phenomenon is crucial to realize the considerable potential for wire arrays to drive both ICF and inertial fusion energy, by enabling a predictive capability in computational modeling. We present the first study to directly compare the mass ablation rates of wire arrays as a function of the current rise rate. Formation of the precursor column is investigated on both the MAPGIE (1 MA, 250ns [Mitchell et al., Rev. Sci. Instrum. 67, 1533 (1996)]) and COBRA (1 MA, 100ns [Greenly et al., Rev. Sci. Instrum. 79, 073501 (2008)]) generators, and results are used to infer the change in the effective ablation velocity induced by the rise rate of the drive current. Laser shadowography, gated extreme ultraviolet (XUV) imaging, and x-ray diodes are used to compare the dynamical behavior on the two generators, and X-pinch radiography and XUV spectroscopy provide density evolution and temperature measurements respectively. Results are compared to predictions from an analytical scaling model developed previously from MAGPIE data, based on a fixed ablation velocity. For COBRA the column formation time occurs at 116{+-}5 ns and for Al arrays and 146{+-}5 ns for W arrays, with Al column temperature in the range of 70-165 eV. These values lie close to model predictions, inferring only a small change in the ablation velocity is induced by the factor of 2.5 change in current rise time. Estimations suggest the effective ablation velocities for MAGPIE and COBRA experiments vary by a maximum of 30%.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Selective polarization of nuclear spins in a wire-like quantum Hall system

Nuclear spins are polarized selectively in a mesoscopic wire-like quantum Hall system by using the fractional quantum Hall system at Landau level filling factor nu = 2/3. The nuclear spin polarized region is limited by setting the filling factor in the wire to 2/3, while leaving the filling factor in the bulk away from 2/3. The longitudinal relaxation rate of selectively polarized nuclear spins probes electron spin properties in the wire.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Microstructure and Hardness of Hot Dip Galvanized Steel During Wire Drawing

The steel wire samples are hot-dip-galvanized. The zinc coating is preformed using the standard method. To recognize the behavior of the zinc coated steel wire during the submission to deformation, the wire samples are drawn on a machine designed for this aim and then investigated. In this research is represented the phase structure of the zinc coated samples. Afterwards the thickness of the layer and the hardness of the hot-dip galvanized steel depending on the drawing is represented.

36 MATERIALS SCIENCE↗

Energy and matter-efficient size-selective growth of thin quantum wires in a plasma

It is shown that plasmas can minimize the adverse Gibbs-Thompson effect in thin quantum wire growth. The model of Si nanowire nucleation includes the unprecedented combination of the plasma sheath, ion- and radical-induced species creation and heating effects on the surface and within an Au catalyst nanoparticle. Compared to neutral gas thermal processes, much thinner, size-selective wires can nucleate at the same temperature and pressure while much lower energy and matter budget is needed to grow same-size wires. This explains the experimental observations and may lead to energy- and matter-efficient synthesis of a broader range of one-dimensional quantum structures.

36 MATERIALS SCIENCE↗

Mechanical Separation of Metallic Copper from Polymer-Insulated Copper Wire

It is very important to recycling of polymer-insulated copper wire to remove copper from the wire without any contamination. A rolling machine and a blender were used to separate and recover the copper wires from a polymer coated cable. In the experiment using a rolling machine, the recovery of copper was improved by an increase in the number of rolling times and by lowering the cable temperature. All of the copper was recovered from a cable of 115 K in temperature. In the other experiment using a blender, the weight of the recovery of copper was increased by shortening the cable length and by increasing the rotary speed of the blender and the treating time. All the copper in a cut cable of 3mm long was recovered from a cable.

36 MATERIALS SCIENCE↗

Plasmon hybridization in parallel nano-wire systems

We apply the plasmon hybridization method to a double-nano-wire system, providing a simple and intuitive description of the plasmon excitations in the system. We apply the two-center cylindrical coordinate system for mathematical convenience and find an explicit form of the surface plasmon oscillations, in terms of the interaction between the bare plasmon modes of the individual surfaces of the nano-wires. We present numerical results to display how the plasmon excitations of the system depend on nano-wire separation when there is no angular momentum transfer, i.e., when m = 0.

36 MATERIALS SCIENCE↗

Carrier localization in ZnO quantum wires

ZnO quantum wires are grown on patterned silicon substrates using plasma-assisted molecular beam epitaxy. A crystallographic etch process exposes the Si(111) planes from Si(001) substrates so that V-grooves are formed. The large misfit between the Si(111) and ZnO(0001) lattice constants leads to low ZnO film quality after growth. Subsequent thermal annealing improves the electronic and structural quality of the film substantially. In the center region of the wire we find a strong photoluminescence intensity enhancement, which arises from carrier localization in the ZnO quantum wire. Two-dimensional self-consistent calculations of the electronic structure show excellent agreement with the experimental results.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Generation of extreme state of water by spherical wire array underwater electrical explosion

The results of the first experiments on the underwater electrical explosion of a spherical wire array generating a converging strong shock wave are reported. Using a moderate pulse power generator with a stored energy of {<=}6 kJ and discharge current of {<=}500 kA with a rise-time of {approx}300 ns, explosions of Cu and Al wire arrays of different diameters and with a different number and diameter of wires were tested. Electrical, optical, and destruction diagnostics were used to determine the energy deposited into the array, the time-of-flight of the shock wave to the origin of the implosion, and the parameters of water at that location. The experimental and numerical simulation results indicate that the convergence of the shock wave leads to the formation of an extreme state of water in the vicinity of the implosion origin that is characterized by pressure, temperature, and compression factors of (2 {+-} 0.2) Multiplication-Sign 10{sup 12} Pa, 8 {+-} 0.5 eV, and 7 {+-} 0.5, respectively.

42 ENGINEERING↗

Peculiarity of convergence of shock wave generated by underwater electrical explosion of ring-shaped wire

Nanosecond timescale underwater electrical wire explosions of ring-shaped Cu wires were investigated using a pulsed generator with a current amplitude up to 50 kA. It was shown that this type of wire explosion results in the generation of a toroidal shock wave (SW). Time- and space-resolved optical diagnostics were used to determine azimuthal uniformity of the shock wave front and its velocity. It was found that the shock wave preserves its circular front shape in the range of radii 50μm<r<5 mm. At r≤15μm, azimuthal irregularities of the SW front were obtained indicating the appearance of azimuthal instability. A surprising finding is that the shock wave propagates with a constant velocity of v{sub sw}=1.2M, where M is the Mach number. The dynamics of the leading part of the shock wave, based on the oblique shock wave theory, is presented, explaining the constant velocity of the shock wave.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Study of micro-pinches in wire-array Z pinches

Bright and hot areas with a high plasma density and temperature are observed in all kinds of Z pinches. We studied bright radiating spots produced by micro-pinches in cylindrical and planar wire-arrays at the 1 MA Zebra pulsed power generator using an x-ray streak camera synchronized with laser diagnostics, x-ray time-gated pinhole camera, and spectroscopy. Hot spots with extremely dense and relatively hot plasma arise during the collapse of the micro-pinches. These hot spots radiate a continuum spectrum with energy >2.5 keV. Typical micro-pinches in Al wire arrays generate x-ray bursts with durations of 0.4–1 ns in the soft x-ray range and 0.1–0.4 ns in the keV range. UV two-frame shadowgraphy shows spatial correlation of hot spots with the collapse and explosion of micro-pinches. Micro-pinches typically occur at the necks of the Z pinch, but can demonstrate a variety of parameters and different dynamics. An analysis of x-ray streak images shows that micro-pinches can generate >20% of the x-ray energy in some types of wire-array Z pinches.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Non-Kondo zero-bias anomaly in disordered quantum wires

We investigated the behavior of the zero-bias anomaly in quantum wires that were embedded with impurities. The linear conductance G can exhibit cusp features that evolve with the positions of the impurities, and these features can be continuously changed using a combination of spit-gate and top-gate voltages. ZBA is observed regardless of the presence of impurity. Kondo model is inadequate for describing the behaviors of both G and ZBA. Despite the presence of impurity scattering, various ZBA behaviors that resemble those reported in clean quantum wires can be observed. Our results suggest that ZBA is an intrinsic phenomenon in a quantum wire, and its temperature and magnetic field dependence does not pertain to the Kondo correlations in quantum dot.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of geometry on the screened acceptor binding energy in a quantum wire

The effect of various Geometries G(x, y) of the GaAs/Al{sub x}Ga{sub 1−x}As Quantum wire like G{sub 1}: (L, L) {sub 2}: (L, L/2) {sub 3}: (L/2, L/4) on the binding energy of an on-center acceptor impurity has been investigated through effective mass approximation using variational technique. The observations were made including the effect of spatial dependent dielectric screening for different concentration of Al, at T=300K. The influence of spatial dielectric screening on different geometries of the wire has been compared and hence the behavior of the acceptor impurity in GaAs/Al{sub x}Ga{sub 1−x}As Quantum wire has been discussed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Fabrication of sub-15 nm aluminum wires by controlled etching

We describe a method for the fabrication of uniform aluminum nanowires with diameters below 15 nm. Electron beam lithography is used to define narrow wires, which are then etched using a sodium bicarbonate solution, while their resistance is simultaneously measured in-situ. The etching process can be stopped when the desired resistance is reached, and can be restarted at a later time. The resulting nanowires show a superconducting transition as a function of temperature and magnetic field that is consistent with their smaller diameter. The width of the transition is similar to that of the lithographically defined wires, indicating that the etching process is uniform and that the wires are undamaged. This technique allows for precise control over the normal state resistance and can be used to create a variety of aluminum nanodevices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗