Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Upgrade”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Upgrade of the ATLAS Thin Gap Chamber Electronics for HL-LHC

The High-Luminosity LHC (HL-LHC) is planned to start its operation in 2026 with an instantaneous luminosity of 7.5×10 34 cm -2 s -1 . Studies with data taken by ATLAS indicate that the upgraded first level trigger with fast tracking for HL-LHC can reduce the rate of a single muon trigger by 25% for the p T threshold of 20 GeV while maintaining similar efficiency. First prototype of the ATLAS Thin Gap Chamber frontend board has been developed with most of the functions required for HL-LHC implemented. Performance of data transfer has been demonstrated with charged particle beams at the CERN SPS beam facility.

Kawaguchi, Tomomi↗
DOE OSTI2022

Furfural Upgrading by Aldol Condensation with Ketones over Solid-Base Catalysts

Aldol condensation reactions between furfural and various ketones were studied in a flow reactor at 373 K and 100 psi for application to upgrading of furfural. Specific rates for the reaction of acetone and furfural were measured on MgAl 2 O 4 , Al 2 O 3 , CaO/MgAl 2 O 4 and MgO/MgAl 2 O 4 and found to be highest on CaO/MgAl 2 O 4 . While the presence of CO 2 and H 2 O did not affect the stability of the CaO/MgAl 2 O 4 catalyst, the catalyst deactivated over a period of a few hours due to the production of 2-furoic acid formed by the Cannizzaro reaction. While aldol condensation rates between furfural and either 2-pentanone and decanal approached that of acetone, rates for 4-heptanone and 2,5-heptanedione were significantly lower because the α-hydrogens of the carbonyl compounds are less easily attacked in these molecules. The selectivity to aldol products is affected by the relative rates of the aldol-condensation and the Cannizzaro reactions. Possible strategies for maximizing production of the aldol products with larger ketones are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Production of biofuels via bio-oil upgrading & refining

This chapter provides cursory reviews of biomass liquefaction, relevant petroleum processing technology, and relevant model compound studies. More detail is provided for upgrading of biomass liquefaction products, including an overview of potential fractionation and catalytic processing methods, hydroprocessing as the primary means of interest, scale of operation, operating conditions and catalysts, and product properties. Batch results are included where needed to provide a more complete narrative, but continuous-flow operations are emphasized as being more informative. Liquid fuel products from biomass through direct liquefaction and hydroprocessing are discussed, such as fuel properties based on chemical analysis and comparison of petroleum fuels and biofuels.

catalysis↗
DOE OSTI2019

Techno-Economic Analysis of Alternative Aqueous Phase Treatment Methods for Microalgae Hydrothermal Liquefaction and Biocrude Upgrading System

An economic analysis was conducted for an algae hydrothermal liquefaction (HTL) and biocrude upgrading system with alternative aqueous phase treatment methods. Using experimental data, three different methods were modeled and compared: 1) direct recycle HTL aqueous phase to the algae farm, 2) catalytic hydrothermal gasification (CHG), and 3) anaerobic digestion (AD). Direct recycle consumes the most natural gas because unlike AD and CHG, no methane is generated from the aqueous phase organics. However, direct recycle has the lowest cost compared to other two cases because it only requires the addition of pumps and buffer tankage related to aqueous phase recycle. The CHG and AD cases require significant capital and operating costs, which increase the minimum fuel selling price (MFSP) over the direct recycle case by 11% and 2.9%, respectively. CHG and AD respectively increase the conversion cost (excludes the cost to grow, harvest, and dewater algae) by 75% and 21%. Sensitivity analysis suggests that the key factors affecting the total cost of fuel production are the feedstock cost, biocrude yields, the plant scale, and the method of aqueous phase treatment.

Zhu, Yunhua↗
DOE OSTI2021

Assessment and comparison of ordered & non-ordered supported metal oxide catalysts for upgrading propane to propylene

Propylene is an important chemical feedstock that is largely produced via cracking of oil-derived naphtha. Direct conversion of propane into propylene may be a more attractive alternative. Specifically, propane dehydrogenation (DH) and oxidative dehydrogenation (ODH) are promising for this transformation, albeit only DH has been industrially implemented. However, even the best DH catalysts (Pt-based) still suffer from deactivation. VO x - and BO x -based ODH catalysts result in significant over-oxidation and lack a mechanistic understanding. A common challenge in developing these catalysts is the broad distribution of surface species caused by the use of non-ordered catalyst supports. This hampers clear structure-performance correlations. Recent progress in the preparation of well-defined active sites on ordered supports has brought about improved catalysts, as well as fundamental insight into the working mechanism. This review will highlight recent advancements in the development of these catalysts and provide direction on the use of ordered supports for propane upgrading.

03 NATURAL GAS↗
DOE OSTI2016

Control and data acquisition upgrades for NSTX-U

The extensive NSTX Upgrade (NSTX-U) Project includes major components which allow a doubling of the toroidal field strength to 1 T, of the Neutral Beam heating power to 12 MW, and the plasma current to 2 MA, and substantial structural enhancements to withstand the increased electromagnetic loads. The maximum pulse length will go from 1.5 to 5 s. The larger and more complex forces on the coils will be protected by a Digital Coil Protection System, which requires demanding real-time data input rates, calculations and responses. The amount of conventional digitized data for a given pulse is expected to increase from 2.5 to 5 GB per second of pulse. 2-D Fast Camera data is expected to go from 2.5 GB/pulse to 10, and another 2 GB/pulse is expected from new IR cameras. Our network capacity will be increased by a factor of 10, with 10 Gb/s fibers used for the major trunks. 32-core Linux systems will be used for several functions, including between-shot data processing, MDSplus data serving, between-shot EFIT analysis, real-time processing, and for a new capability, between-shot TRANSP. As a result, improvements to the MDSplus events subsystem will be made through the use of both UDP and TCP/IP based methods and the addition of a dedicated “event server”.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2017

Physics-based control-oriented modeling of the current density profile evolution in NSTX-Upgrade

Active control of the toroidal current density profile is among those plasma control milestones that the National Spherical Torus eXperiment-Upgrade (NSTX-U) program must achieve to realize its next-step operational goals. Motivated by the coupled, nonlinear, multivariable, distributed-parameter plasma dynamics, the first step towards control design is the development of a physics-based, control-oriented model for the current profile evolution in response to non-inductive current drives and heating systems. The evolution of the toroidal current density profile is closely related to the evolution of the poloidal magnetic flux profile, whose dynamics is modeled by a nonlinear partial differential equation (PDE) referred to as the magnetic-flux diffusion equation (MDE). The proposed control-oriented model predicts the spatial-temporal evolution of the current density profile by combining the nonlinear MDE with physics-based correlations obtained at NSTX-U for the electron density, electron temperature, and non-inductive current drives (neutral beams). The resulting first-principles-driven, control-oriented model is tailored for NSTX-U based on predictions by the time-dependent transport code TRANSP. Furthermore, main objectives and possible challenges associated with the use of the developed model for the design of both feedforward and feedback controllers are also discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2019

TRANSP-based closed-loop simulations of current profile optimal regulation in NSTX-Upgrade

Active control of the toroidal current density profile is critical for the upgraded National Spherical Torus eXperiment device (NSTX-U) to maintain operation at the desired high-performance, MHD-stable, plasma regime. Initial efforts towards current density profile control have led to the development of a control-oriented, physics-based, plasma-response model, which combines the magnetic diffusion equation with empirical correlations for the kinetic profiles and the non-inductive current sources. The developed control-oriented model has been successfully tailored to the NSTX-U geometry and actuators. Moreover, a series of efforts have been made towards the design of model-based controllers, including a linear-quadratic-integral optimal control strategy that can regulate the current density profile around a prescribed target profile while rejecting disturbances. In this work, the tracking performance of the proposed current-profile optimal controller is tested in numerical simulations based on the physics-oriented code TRANSP. Furthermore, these high-fidelity closed-loop simulations, which are a critical step before experimental implementation and testing, are enabled by a flexible framework recently developed to perform feedback control design and simulation in TRANSP.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2019

The JET upgraded toroidal Alfvén Eigenmode Diagnostic System

The Alfvén Eigenmode Active Diagnostic system (AEAD) has undergone a major upgrade and redesign to provide a state-of-the-art excitation and real-time detection system for JET. The new system consists of individual 4 kW amplifiers allowing for increased current, separate excitation and real time control of relative phasing between antenna currents. The amplifiers have a frequency range of 10–1000 kHz, divided into various frequency bands by external matching filters. Due to the varying transmission line impedance throughout the frequency range, the amplifiers were designed with a very high resilience to reflected power. The existing amplifier control electronics have been replaced with a digital control system incorporating a National Instruments platform and Field Programmable Gate Array (FPGA) modules for frequency, gain and phase control with a frequency and phase resolution of less than 1 kHz and 1 degree respectively. Complementing the digital control system is the Protection and Control System, which utilizes Field Programmable Analog Arrays (FPAAs) and an array of electronic devices to monitor and control the AEAD. New capabilities such as independent antenna current/phase control, allow for improved excitation control, better definition of antenna spectrum combined with enhanced system reliability. This paper will review the new AEAD system, its unique capabilities and improvements over the previous diagnostic system.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Validation of the strike point position estimation with the local expansion method for MAST upgrade on the DIII-D tokamak

A local expansion method has been proposed for estimating the strike point position for the advanced divertor configuration on the MAST Upgrade tokamak. The paper discusses the application and assesses the performance of the technique on a long-legged divertor plasma configuration on an operating device - the DIII-D tokamak. A comparison of the spatial location of the outer strike point estimated with the local expansion method against the plasma boundary reconstruction and divertor diagnostics on the DIII-D tokamak is reported. A good agreement with the equilibrium reconstruction and diagnostic data is achieved with respect to estimation of the spatial location of the outer strike point for the long-legged divertor plasma discharge.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Final design of outer poloidal field coils for COMPASS Upgrade

The paper aims to provide an overview of the final design of the outer poloidal field coils system for COMPASS Upgrade. Due to a relatively unique combination of design features of the new device (placement in high toroidal magnetic field, copper coils sub-cooled to liquid nitrogen temperature, hot vacuum vessel operation), the poloidal field coils design faced several interesting engineering challenges. Most notably high electromagnetic stress in the coil conductor, compatibility of the insulation to thermal and mechanical stress and design of coil supports with given spatial constraints while able to accommodate coil movements and withstand considerable mechanical stress. In conclusion, the paper describes solution to these challenges together with underlying analyses and mechanical tests.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Chemical upgrade of carbon monoxide to acetate on an atomically dispersed copper catalyst via CO-insertion

Electrochemical conversion of small molecules such as carbon dioxide (CO 2 ) and carbon monoxide (CO) to high-value multi-carbon products (C 2+ ) offers a chemical upgrade approach for fuels and chemical feedstock production using renewable energy, in the possible absence of the petrochemical industry under the new energy system such as hydrogen economy. Identifying robust and efficient electrocatalysts to selectively produce C 2+ products remains a challenge. In this study, we report a synthetic strategy of atomically dispersing copper atoms on nitrogen-rich porous carbon (Cu–N–C) through pyrolysis of a supramolecular assembly. Benefitting from the unsaturated coordination structure, in KOH electrolyte, the Cu–N–C with a Cu content of 6.9 wt% exhibits a maximum acetate Faradaic efficiency (FE) of 30% with an acetate partial current density as high as 48 mA cm –2 in electrochemical CO reduction. Different from the C–C coupling mechanism on metallic copper, we propose a CO insertion mechanism for the acetate production on the single site copper catalyst.

36 MATERIALS SCIENCE↗
DOE OSTI2012

Upgraded photon calorimeter with integrating readout for Hall A Compton Polarimeter at Jefferson Lab

The photon arm of the Compton polarimeter in Hall A of Jefferson Lab has been upgraded to allow for electron beam polarization measurements with better than 1% accuracy. The data acquisition system (DAQ) now includes an integrating mode, which eliminates several systematic uncertainties inherent in the original counting-DAQ setup. The photon calorimeter has been replaced with a Ce-doped Gd 2 SiO 5 crystal, which has a bright output and fast response, and works well for measurements using the new integrating method at electron beam energies from 1 to 6 GeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2012

Characterization of the Neutron Detector Upgrade to the GP-SANS and BIO-SANS Instruments at HFIR

Over the past year, new 1 m x 1 m neutron detectors have been installed at both the General Purpose SANS (GP-SANS) and the Bio-SANS instruments at HFIR, each intended as an upgrade to provide improved high rate capability. This paper presents the results of characterization studies performed in the detector test laboratory, including position resolution, linearity and background, as well as a preliminary look at high count rate performance.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2014

Nonlinear dynamics optimization with particle swarm and genetic algorithms for SPEAR3 emittance upgrade

Nonlinear dynamics optimization is carried out for a low emittance upgrade lattice of SPEAR3 in order to improve its dynamic aperture and Touschek lifetime. Two multi-objective optimization algorithms, a genetic algorithm and a particle swarm algorithm, are used for this study. The performance of the two algorithms are compared. The result shows that the particle swarm algorithm converges significantly faster to similar or better solutions than the genetic algorithm and it does not require seeding of good solutions in the initial population. These advantages of the particle swarm algorithm may make it more suitable for many accelerator optimization applications.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2019

Layout and assembly technique of the GEM chambers for the upgrade of the CMS first muon endcap station

Triple-GEM detector technology was recently selected by CMS for a part of the upgrade of its forward muon detector system as GEM detectors provide a stable operation in the high radiation environment expected during the future High-Luminosity phase of the Large Hadron Collider (HL-LHC). In a first step, GEM chambers (detectors) will be installed in the innermost muon endcap station in the 1.6<|η|<2.2 pseudo-rapidity region, mainly to control level-1 muon trigger rates after the second LHC Long Shutdown. These new chambers will add redundancy to the muon system in the η-region where the background rates are high, and the bending of the muon trajectories due to the CMS magnetic field is small. A novel construction technique for such chambers has been developed in such a way where foils are mounted onto a single stack and then uniformly stretched mechanically, avoiding the use of spacers and glue inside the active gas volume. We describe the layout, the stretching mechanism and the overall assembly technique of such GEM chambers.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2019

Mass production of a trigger data serializer ASIC for the upgrade of the muon spectrometer at the ATLAS experiment

The Trigger Data Serializer (TDS) is a custom ASIC designed for the upgrade of the innermost station of the endcap ATLAS Muon spectrometer. Here, it is a mixed-signal chip with two working modes that can handle up to 128 detector channels. A total of 6000 TDS ASICs have been produced for detector operation. This paper discusses a custom automatic test platform we developed to provide quality control of the TDS ASICs. We introduce the design, illustrate the test procedures, and discuss the experimental results.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2019

A multi-layer SEU mitigation strategy to improve FPGA design robustness for the ATLAS muon spectrometer upgrade

We present a multi-layer single-event upset mitigation strategy implemented in a low-cost Xilinx Artix-7 FPGA. The implementation is targeted for a trigger data router for the ATLAS muon spectrometer upgrade. The mitigation strategy employs three layers of protection to improve overall FPGA design robustness: use of triple-modular redundancy for FPGA fabric logic and embedded soft-error mitigation in the first layer; further enhancement with multi-boot FPGA reconfiguration across multiple copies of configuration memory in the second layer; and FPGA power cycling and configuration memory re-initialization in the third layer. Here, the effectiveness of this scheme has been evaluated at two different neutron facilities, LANSCE and NCSR ‘‘Demokritos’’, with 800 MeV and 25 MeV beam energies, respectively. Testing was performed with a similar configuration to that planned for final operation. We discuss the testing strategy and summarize the test results to estimate the expected data loss over 10 years of operation in the ATLAS experiment.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗