Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Topological Materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Colossal magnetoresistance in a nonsymmorphic antiferromagnetic insulator

Here we investigate antiferromagnetic Eu 5 In 2 Sb 6 , a nonsymmorphic Zintl phase. Our electrical transport data show that Eu 5 In 2 Sb 6 is remarkably insulating and exhibits an exceptionally large negative magnetoresistance, which is consistent with the presence of magnetic polarons. From ab initio calculations, the paramagnetic state of Eu 5 In 2 Sb 6 is a topologically nontrivial semimetal within the generalized gradient approximation (GGA), whereas an insulating state with trivial topological indices is obtained using a modified Becke–Johnson potential. Notably, GGA + U calculations suggest that the antiferromagnetic phase of Eu 5 In 2 Sb 6 may host an axion insulating state. Our results provide important feedback for theories of topological classification and highlight the potential of realizing clean magnetic narrow-gap semiconductors in Zintl materials.

36 MATERIALS SCIENCE↗

A cryogenically cooled 200 kV DC photoemission electron gun for ultralow emittance photocathodes

Novel photocathode materials like ordered surfaces of single crystal metals, epitaxially grown high quantum efficiency thin films, and topologically non-trivial materials with dirac cones show great promise for generating brighter electron beams for various accelerator and ultrafast electron scattering applications. Despite several materials being identified as brighter photocathodes, none of them have been tested in electron guns to extract electron beams due to technical and logistical challenges. In this paper, we present the design and commissioning of a cryocooled 200 kV DC electron gun that is capable of testing a wide variety of novel photocathode materials over a broad range of temperatures from 298 to 35 K for bright electron beam generation. This gun is designed to enable easy transfer of the photocathode to various standard ultra-high-vacuum surface diagnostics and preparation techniques, allowing a full characterization of the dependence of beam brightness on the photocathode material and surface properties. We demonstrate the development of such a high-voltage, high-gradient gun using materials and equipment that are easily available in any standard university lab, making the development of such 200 kV electron guns more accessible.

Instruments & Instrumentation↗

$A$-type antiferromagnetic order and magnetic phase diagram of the trigonal Eu spin-$\frac{7}{2}$ triangular-lattice compound $\mathrm{EuSn_2As_2}$

The trigonal compound EuSn 2 As 2 was recently discovered to host Dirac surface states within the bulk band gap and orders antiferromagnetically below the N´eel temperature T N = 23.5(2) K from neutron-diffraction measurements. Here the magnetic ground state of single-crystal EuSn 2 As 2 and the evolution of its properties versus temperature T and applied magnetic field H are reported. Included are the zero-field single-crystal neutron diffraction measurements versus T, magnetization M(H, T), magnetic susceptibility χ(H, T) = M(H,T)/H, heat capacity C p (H, T), and electrical resistivity ρ(H, T) measurements. The neutron-diffraction and χ(T) measurements both indicate a collinear A-type antiferromagnetic (AFM) structure below T N , where the Eu 2+ spins S = 7/2 in a triangular ab-plane layer (hexagonal unit cell) are aligned ferromagnetically in the ab plane whereas the spins in adjacent Eu planes along the c axis are aligned antiferromagnetically. The χ(H ab , T) and χ(Hc, T) data together indicate a smooth crossover between the collinear AFM alignment and an unknown magnetic structure at H ≈ 0.12 T. Dynamic spin fluctuations up to 60 K are evident in the χ(T), Cp(T) and ρ(H, T) measurements, a temperature that is more than twice T N . The ρ(H, T) is consistent with a low-carrier-density metal with strong magnetic scattering and does not reflect a contribution of the topological state of the material as reported earlier by ARPES measurements. This observation is consistent with previous ones for other topological insulators where the chemical potential is above the Dirac point so that ARPES readily detects the surface states, whereas resistivity measurements do not. Finally, the magnetic phase diagrams for both H ∥ c and H ∥ ab in the H-T plane are constructed from the T N (H), χ(H, T), Cp(H, T), and ρ(H, T) data.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Evolution of electronic and magnetic properties in the topological semimetal SmSb x Te 2– x

The ZrSiS-type materials have attracted intensive attention due to the existence of various topological fermions. The magnetic version of the ZrSiS-type materials, L n SbTe(L n = lanthanides), is an ideal candidate to explore novel exotic states due to the interaction between magnetism and topology. In this work, we report the experimental study on structural, magnetic, thermodynamic, and electronic properties for SmSb x Te 2– x with various Sb content. Further, the revealed evolutions of these properties with tuning the compositions would provide useful insights for the fundamental topological physics and the future applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Probing polarization dynamics at specific domain configurations: Computer-vision based automated experiment in piezoresponse force microscopy

Topological defects in ferroelectric materials have attracted much attention due to the emergence of conductive, ferroic, and magnetic functionalities. However, many topological configurations dynamically evolve during the switching processes, making them a challenge to characterize via traditional techniques. Here, we implement an automated experimentation approach for the exploration of functional properties in BiFeO 3 thin films. Specifically, we visualize the ferroelectric domain structures via single frequency piezoresponse force microscopy and implement a computer vision-based algorithm to discover features of interest at which spectroscopic measurements are taken. Subsequently, we employ dimensionality reduction techniques to reveal characteristic polarization behaviors at these features. This approach can be extended to other spectroscopies and modalities to probe only specific features of interest, ultimately enabling dynamical processes in ferroelectrics to be studied.

36 MATERIALS SCIENCE↗

Complex magnetic phases in the polar tetragonal intermetallic NdCoGe 3

Polar materials can host a variety of topologically significant magnetic phases, which often emerge from a modulated magnetic ground state. Relatively few noncentrosymmetric tetragonal materials have been shown to host topological spin textures and new candidate materials are necessary to expand the current theoretical models. This manuscript reports on the anisotropic magnetism in the polar, tetragonal material NdCoGe 3 via thermodynamic and neutron diffraction measurements. The previously reported H - T phase diagram is updated to include several additional phases, which exist for both H = 0 and with an applied field H ⊥ c . Neutron diffraction data reveal that the magnetic structures below T N 1 = 3.70 K and T N 2 = 3.50 K are incommensurate, with a ground-state magnetic order that is incommensurate in all directions with the propagation vector $\vec{k}$ = (0.494, 0.0044, 0.385) at 1.8 K. A unique magnetic structure solution is not achievable, but the possible single-$\vec{k}$ and $\vec{k}$ spin models are discussed. These results demonstrate that NdCoGe 3 hosts complicated magnetic order derived from modulated magnetic moments.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Observation of a smoothly tunable Dirac point in Ge ( Bi x Sb 1 - x ) 2 Te 4

State-of-the-art topological devices require the use of topologically protected surface states to drive electronic transport. Here, we examine a tunable topological system, Ge(Bi x Sb 1-x ) 2 Te 4 , for a range of $\mathcal{x}$ values from 0 to 1, using a combination of Fourier transform scanning tunneling spectroscopy and angle-resolved photoemission spectroscopy. Our results show that the Dirac point shifts linearly with $\mathcal{x}$, crossing the Fermi energy near $\mathcal{x}$=0.7. This observation of a smoothly tunable, isolated Dirac point crossing through the topological transport regime and having strong linear dependence with substitution can be critical for future topological spintronics applications.

36 MATERIALS SCIENCE↗

Helical Edge States and Quantum Phase Transitions in Tetralayer Graphene

Helical conductors with spin-momentum locking are promising platforms for Majorana fermions. Here we report observation of two topologically distinct phases supporting helical edge states in charge neutral Bernal-stacked tetralayer graphene in Hall bar and Corbino geometries. As the magnetic field B ⊥ and out-of-plane displacement field D are varied, we observe a phase diagram consisting of an insulating phase and two metallic phases, with 0, 1, and 2 helical edge states, respectively. These phases are accounted for by a theoretical model that relates their conductance to spin-polarization plateaus. Transitions between them arise from a competition among interlayer hopping, electrostatic and exchange interaction energies. Finally, our work highlights the complex competing symmetries and the rich quantum phases in few-layer graphene.

36 MATERIALS SCIENCE↗

Third-order Hall effect in the surface states of a topological insulator

Time reversal and inversion symmetric materials fail to yield linear and nonlinear responses since they possess net zero Berry curvature. However, higher-order Hall response can be generated in these systems upon constraining the crystalline symmetries. Motivated by the recently discovered third-order Hall (TOH) response mediated by Berry connection polarizability, namely, the variation of the Berry connection with respect to an applied electric field, here, we investigate the existence of such a Hall effect in the surface states of hexagonal warped topological insulators (e.g., Bi 2 Te 3 ) under the application of only electric field. Using the semiclassical Boltzmann formalism, we investigate the effect of tilt and hexagonal warping on the Berry connection polarizability tensor and, consequently, the TOH effect, provided the Dirac cone remains gapless. We find that the magnitude of the response increases significantly with increasing tilt strength and warping, and therefore, they can provide the tunability of this effect. In addition, we also explore the effect of chemical doping on the TOH response in this system. Interestingly, we show, based on the symmetry analysis, that the TOH can be the leading-order response in this system, which can directly be verified in experiments.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tunable Nanoscale Evolution and Topological Phase Transitions of a Polar Vortex Supercrystal

Here, understanding the phase transitions and domain evolutions of mesoscale topological structures in ferroic materials is critical to realizing their potential applications in next-generation high-performance storage devices. Here, the behaviors of a mesoscale supercrystal are studied with 3D nanoscale periodicity and rotational topology phases in a PbTiO 3 /SrTiO 3 (PTO/STO) superlattice under thermal and electrical stimuli using a combination of phase-field simulations and X-ray diffraction experiments. A phase diagram of temperature versus polar state is constructed, showing the formation of the supercrystal from a mixed vortex and α-twin state and a temperature-dependent erasing process of a supercrystal returning to a classical α-twin structure. Under an in-plane electric field bias at room temperature, the vortex topology of the supercrystal irreversibly transforms to a new type of stripe-like supercrystal. Under an out-of-plane electric field, the vortices inside the supercrystal undergo a topological phase transition to polar skyrmions. These results demonstrate the potential for the on-demand manipulation of polar topology and transformations in supercrystals using electric fields. The findings provide a theoretical understanding that may be utilized to guide the design and control of mesoscale polar structures and to explore novel polar structures in other systems and their topological nature.

P=phase-field simulations↗

Fe 1+ y Te x Se1- x : A Delicate and Tunable Majorana Material

Here, we report the observation for the p z electron band and the band inversion in Fe 1 + y Te x Se 1–x with angle-resolved photoemission spectroscopy. Furthermore, we found that excess Fe (y > 0) inhibits the topological band inversion in Fe 1 + y Te x Se 1 – x , which explains the absence of Majorana zero modes in previous reports for Fe 1+y Te x Se 1 – x with excess Fe. Based on our analysis of different amounts of Te doping and excess Fe, we propose a delicate topological phase in this material. Thanks to this delicate phase, one may be able to tune the topological transition via applying lattice strain or carrier doping.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Curvature Energetics Determined by Alchemical Simulation on Four Topologically Distinct Lipid Phases

The relative curvature energetics of two lipids are tested using thermodynamic integration (TI) on four topologically distinct lipid phases. Simulations use TI to switch between choline headgroup lipids (POPC; that prefers to be flat) and ethanolamine headgroup lipids (POPE; that prefer, for example, the inner monolayer of vesicles). Here, the thermodynamical moving of the lipids between planar, inverse hexagonal (H II ), cubic (Q II ; Pn3m space group), and vesicle topologies reveals differences in material parameters that were previously challenging to access. The methodology allows for predictions of two important lipid material properties: the difference in POPC/POPE monolayer intrinsic curvature (ΔJ 0 ) and the difference in POPC/POPE monolayer Gaussian curvature modulus (Δ$\bar{κ_m}$), both of which are connected to the energetics of topological variation. Analysis of the TI data indicates that, consistent with previous experiment and simulation, the J 0 of POPE is more negative than POPC (ΔJ 0 = –0.018 ± 0.001 Å –1 ). The theoretical framework extracts significant differences in $\bar{κ_m}$ of which POPE is less negative than POPC by 2.0 to 4.0 kcal/mol. The range of these values is determined by considering subsets of the simulations, and disagreement between these subsets suggests separate mechanical parameters at very high curvature. Finally, the fit of the TI data to the model indicates that the position of the pivotal plane of curvature is not constant across topologies at high curvature. Overall, the results offer insights into lipid material properties, the limits of a single HC model, and how to test them using simulation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Antiferromagnetic topological insulating state in $\mathrm{Tb_{0.02}Bi_{1.08}Sb_{0.9}Te_2S}$ single crystals

Topological insulators are emerging materials with insulating bulk and symmetry protected nontrivial surface states. One of the most fascinating transport behaviors in a topological insulator is the quantized anomalous Hall insulator, which has been observed in magnetic-topological-insulator-based devices. Here in this work, we report a successful doping of rare earth element Tb into Bi 1.08 Sb 0.9 Te 2 S topological insulator single crystals, in which the Tb moments are antiferromagnetically ordered below ~10 K. Benefiting from the in-bulk-gap Fermi level, transport behavior dominant by the topological surface states is observed below ~150 K. At low temperatures, strong Shubnikov–de Haas oscillations are observed, which exhibit 2D-like behavior. The topological insulator with long range magnetic ordering in rare earth doped Bi 1.08 Sb 0.9 Te 2 S single crystal provides an ideal platform for quantum transport studies and potential applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Imaging the Breakdown and Restoration of Topological Protection in Magnetic Topological Insulator MnBi 2 Te 4

Quantum anomalous Hall (QAH) insulators transport charge without resistance along topologically protected chiral 1D edge states. Yet, in magnetic topological insulators to date, topological protection is far from robust, with zero-magnetic field QAH effect only realized at temperatures an order of magnitude below the Néel temperature T N , though small magnetic fields can stabilize QAH effect. Understanding why topological protection breaks down is therefore essential to realizing QAH effect at higher temperatures. Here a scanning tunneling microscope is used to directly map the size of exchange gap (E g,ex ) and its spatial fluctuation in the QAH insulator 5-layer MnBi 2 Te 4 . Long-range fluctuations of E g,ex are observed, with values ranging between 0 (gapless) and 70 meV, appearing to be uncorrelated to individual surface point defects. The breakdown of topological protection is directly imaged, showing that the gapless edge state, the hallmark signature of a QAH insulator, hybridizes with extended gapless regions in the bulk. Finally, it is unambiguously demonstrated that the gapless regions originate from magnetic disorder, by demonstrating that a small magnetic field restores E g,ex in these regions, explaining the recovery of topological protection in magnetic fields. The results indicate that overcoming magnetic disorder is the key to exploiting the unique properties of QAH insulators.

36 MATERIALS SCIENCE↗

Chern numbers of topological phonon band crossing determined with inelastic neutron scattering

Topological invariants in the band structure, such as Chern numbers, are important for the understanding and classification of the topological properties of matter and dictate the occurrence of exotic behaviors, yet their direct spectroscopic determination has been largely limited to electronic bands. Here, we use inelastic neutron scattering in conjunction with ab initio calculations to identify a variety of topological phonon band crossings in MnSi and CoSi single crystals. We find a distinct relation between the Chern numbers of a band-crossing node and the scattering intensity modulation in momentum space around the node. Given sufficiently high resolution, our method can be used to determine arbitrarily large Chern numbers of topological phonon band-crossing nodes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Weyl semimetal in the rare-earth hexaboride family supporting a pseudonodal surface and a giant anomalous Hall effect

Rare-earth hexaborides offer a rich tapestry for exploring the interplay of topological orders, magnetism, and electron-correlation effects associated with protected quantum phenomena. Using first-principles modeling, we identify in cerium hexaboride (CeB 6 ) a topological state that harbors a pseudonodal surface (PNS) along with double-Weyl fermions. An analysis of the electronic states in the vicinity of the Fermi level reveals the presence of M z -mirror-symmetry-protected band crossings that involve itinerant (d) and localized (f) states of Ce. These band crossings are found to remain nearly gapless as one goes away from the mirror plane, driving the formation of PNS states. We also demonstrate the presence of coexisting double-Weyl fermions with chiral charges of ±2 on the C 4z rotational axis. By analyzing the Berry curvature field associated with the topological states, we predict that CeB 6 supports a giant anomalous Hall conductivity of -1840Ω -1 cm -1 in the slightly electron-doped regime, which would be larger than the values reported to date in magnetic Weyl semimetals. Our study thus indicates that CeB 6 , which combines ferromagnetic order with topological physics in a heavy-fermion matrix, would provide a promising playground for investigating topological magnetic states with giant anomalous Hall responses.

36 MATERIALS SCIENCE↗

Influence of topology optimization parameters on the mechanical response of an additively manufactured test structure

Topology Optimization (TO) determines a material distribution within a domain under given conditions and design constraints, and generally generates complex geometries as a result. Complementary to TO, Additive Manufacturing (AM) offers the ability to fabricate complex geometries which may be difficult to manufacture using traditional techniques such as milling. AM has been used in multiple industries including the medical devices area. Hence, TO may be used to create patient-matched devices where the mechanical response is catered to a particular patient. Furthermore, during a medical device regulatory 510(k) pathway, demonstrating that worst-cases are known and tested is critical to the review process. Using TO and AM to predict worst-case designs for subsequent performance testing may be challenging and does not appear to have been thoroughly explored. Investigating the effects of TO input parameters when AM is employed may be the first step in determining the feasibility of predicting these worst-cases.

36 MATERIALS SCIENCE↗