SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The tasks undertaken to be performed under this contract included the continued coordination and documentation of the CRRES program and the development of an archive that details the experimental results obtained by the CRRES Program. Details of the work undertaken and results achieved are summarized in the following sections.
The overall objective of this study was to develop a 3-D numerical analysis for compressor casing treatment flowfields, and to perform a series of detailed numerical predictions to assess the effectiveness of various endwall treatments for enhancing the efficiency and stall margin of modern high speed fan rotors. Particular attention was given to examining the effectiveness of endwall treatments to counter the undesirable effects of inflow distortion. Calculations were performed using three different gridding techniques based on the type of casing treatment being tested and the level of complexity desired in the analysis. In each case, the casing treatment itself is modeled as a discrete object in the overall analysis, and the flow through the casing treatment is determined as part of the solution. A series of calculations were performed for both treated and untreated modern fan rotors both with and without inflow distortion. The effectiveness of the various treatments were quantified, and several physical mechanisms by which the effectiveness of endwall treatments is achieved are discussed.
Abstract not provided.
Abstract not provided.
This presentation, part of the DOE Hydrogen Program 2022 Annual Merit Review and Peer Evaluation Meeting in June 2022, discusses Hydrogen (H2) from Next-generation Electrolyzers of Water and system and techno-economic analysis.
Technologies under development aim to increase yields of desired end products, reduce overall raw material costs, and/or develop more energy-efficient strategies for product recovery. Techno-economic analysis (TEA) and life-cycle assessments (LCA) help assure that economic and sustainability predictions of the technologies are unbiased and compelling and provide guidance to experimentalists on areas that need focus. Building on previous work, the performance-advantaged bioproducts and bioprocessing separations project (SepCon) continues to use the integrated TEA and LCA to evaluate and guide technologies under development and target challenges relevant to the industry and the Bioenergy Technologies Office (BETO) priority pathways. The analysis team aims to provide credible, unbiased assessments for each technology under development, with ongoing assessments to guide experimental teams. Additionally, the team also supports journal publications highlighting key findings.
The purpose was to investigate and evaluate the interchange of application- specific data among multiple programs each carrying out part of the analysis and design task. This has been carried out previously by creating a custom program to read data produced by one application and then write that data to a file whose format is specific to the second application that needs all or part of that data. In this investigation, data of interest is described using the XML markup language that allows the data to be stored in a text-string. Software to transform output data of a task into an XML-string and software to read an XML string and extract all or a portion of the data needed for another application is used to link two independent applications together as part of an overall design effort. This approach was initially used with a standard analysis program, Lapin, along with standard applications a standard spreadsheet program, a relational database program, and a conventional dialog and display program to demonstrate the successful sharing of data among independent programs. See Engineering Analysis Using a Web-Based Protocol by J.D. Schoeffler and R.W. Claus, NASA TM-2002-211981, October 2002. Most of the effort beyond that demonstration has been concentrated on the inclusion of more complex display programs. Specifically, a custom-written windowing program organized around dialogs to control the interactions have been combined with an independent CAD program (Open Cascade) that supports sophisticated display of CAD elements such as lines, spline curves, and surfaces and turbine-blade data produced by an independent blade design program (UD0300).
The purpose of grant NCC3-966 was to investigate and evaluate the interchange of application-specific data among multiple programs each carrying out part of the analysis and design task. This has been carried out previously by creating a custom program to read data produced by one application and then write that data to a file whose format is specific to the second application that needs all or part of that data. In this investigation, data of interest is described using the XML markup language that allows the data to be stored in a text-string. Software to transform output data of a task into an XML-string and software to read an XML string and extract all or a portion of the data needed for another application is used to link two independent applications together as part of an overall design effort. This approach was initially used with a standard analysis program, Lapin, along with standard applications a standard spreadsheet program, a relational database program, and a conventional dialog and display program to demonstrate the successful sharing of data among independent programs. Most of the effort beyond that demonstration has been concentrated on the inclusion of more complex display programs. Specifically, a custom-written windowing program organized around dialogs to control the interactions have been combined with an independent CAD program (Open Cascade) that supports sophisticated display of CAD elements such as lines, spline curves, and surfaces and turbine-blade data produced by an independent blade design program (UD0300).
The question is addressed which was raised by the Critical Evaluation Task Force (CETF) analysis of the space station: if a Flight Telerobotic Servicer (FTS) of a given technical risk could be built for use during space station assembly, could it save significant extravehicular (EVA) resources. Key issues and trade-offs associated with using an FTS to aid in space station assembly phase tasks such as construction and servicing are identified. A methodology is presented that incorporates assessment of candidate assembly phase tasks, telerobotics performance capabilities, development costs, operational constraints (STS and proximity operations), maintenance, attached payloads, and polar platforms. A discussion of the issues is presented with focus on potential FTS roles: (1) as a research-oriented test bed to learn more about space usage of telerobotics; (2) as a research-based test bed with an experimental demonstration orientation and limited assembly and servicing applications; or (3) as an operational system to augment EVA, to aid the construction of the space station, and to reduce the programmatic (schedule) risk by increasing the flexibility of mission operations. During the course of the study, the baseline configuration was modified into Phase 1 (a station assembled in 12 flights), and Phase 2 (a station assembled over a 30 flight period) configuration.
process for automatically generating computational models of human/computer interactions as well as graphical and textual representations of the models has been built on the conceptual foundation of a method known in the art as CPM-GOMS. This method is so named because it combines (1) the task decomposition of analysis according to an underlying method known in the art as the goals, operators, methods, and selection (GOMS) method with (2) a model of human resource usage at the level of cognitive, perceptual, and motor (CPM) operations. CPM-GOMS models have made accurate predictions about behaviors of skilled computer users in routine tasks, but heretofore, such models have been generated in a tedious, error-prone manual process. In the present process, CPM-GOMS models are generated automatically from a hierarchical task decomposition expressed by use of a computer program, known as Apex, designed previously to be used to model human behavior in complex, dynamic tasks. An inherent capability of Apex for scheduling of resources automates the difficult task of interleaving the cognitive, perceptual, and motor resources that underlie common task operators (e.g., move and click mouse). The user interface of Apex automatically generates Program Evaluation Review Technique (PERT) charts, which enable modelers to visualize the complex parallel behavior represented by a model. Because interleaving and the generation of displays to aid visualization are automated, it is now feasible to construct arbitrarily long sequences of behaviors. The process was tested by using Apex to create a CPM-GOMS model of a relatively simple human/computer-interaction task and comparing the time predictions of the model and measurements of the times taken by human users in performing the various steps of the task. The task was to withdraw $80 in cash from an automated teller machine (ATM). For the test, a Visual Basic mockup of an ATM was created, with a provision for input from (and measurement of the performance of) the user via a mouse. The times predicted by the automatically generated model turned out to approximate the measured times fairly well (see figure). While these results are promising, there is need for further development of the process. Moreover, it will also be necessary to test other, more complex models: The actions required of the user in the ATM task are too sequential to involve substantial parallelism and interleaving and, hence, do not serve as an adequate test of the unique strength of CPM-GOMS models to accommodate parallelism and interleaving.
Horizontal Compact High Temperature Gas Reactor (HC-HTGR) is being designed by a multidisciplinary team of nuclear, mechanical, and structural engineers under the support of a DOE-NE Advanced Reactor Demonstration Program’s Advanced Reactor Concepts-20 (ARC-20) award. The objective of this ARC-20 project is to deliver a conceptual design for the proposed HC-HTGR in 3 years and support its commercialization as a safe, low-cost HTGR. Argonne National Laboratory (Argonne) is responsible for the design and analysis of the reactor cavity cooling system (RCCS) as a safety system for passive decay heat removal of the reactor concept. Additionally, Argonne is providing analysis of the primary coolant system to ensure temperatures within the core remain below safety margins during steady-state and potential accident scenarios. This second semi-annual report summarized the progress made at Argonne on the two tasks during the second half of FY22. As a part of the RCCS design task, a scoping calculation in estimating HVAC capability for the HC-HTGR reactor building was performed. A water panel modeling study was first performed with the test case, which confirms the capability of the RELAP5-3D modeling approach to explore various design options of the HC-HTGR RCCS under consideration. Then, a reference RELAP5-3D model for the unit geometry of the preliminary design of the HC-HTGR RCCS was developed. A preliminary performance analysis was conducted to evaluate the performances of a single-phase natural circulation and panel conduction in various operating conditions. For the primary coolant system analysis task, preliminary thermal hydraulic analysis of the HC-HTGR core design was performed with a high resolution 1D fluid-3D solid coupled model using the System Analysis Module (SAM) to assess the assembly coolant channel and bypass flow mass flow rate distribution. Some preliminary work on the development of a full core reduced order model was discussed following the assembly level model to predict the core wide coolant flow distribution and to model certain operational and accidental transients.
All nuclear power plants must consider and evaluate external flooding risks such as local intense precipitation, dam failure, and coastal flooding due to storm surge or tsunami. While these events could challenge off-site power and other plant structure integrity, threaten plant safety systems and components, and limit plant access, they are more than often qualitatively regarded as risk insignificant and screened out from detailed evaluation and quantification. The recent lessons learned from the Fukushima seismic/tsunami initiated nuclear accident (2011), the Fort Calhoun (2011), Vermont Yankee (2013), Arkansas Nuclear One (2013), and St. Luice (2014) flooding events showed otherwise. However, developing an external flood model with traditional event tree/fault tree approach as in a static probabilistic risk assessment (PRA) model could be difficult to accurately represent plant system and component behavior and reliability of manual actions during an ever-progressing flood event. The plant response to external flood may be highly spatial- and time- dependent and subject to the hydrological and hydraulic characteristics of the flood event. Such unique challenges prompt the investigation of using the simulation-based dynamic analysis approaches for external flood risk assessment. Simulation methods can better illustrate the performance of structures, systems, and components during an external flooding event. A general framework to perform a simulation-based dynamic flooding analysis is presented in this paper with the sub-tasks of flood hazard analysis, flood fragility analysis, plant response modeling, safety margin analysis or PRA quantification. A new type of State PRA modeling technique is introduced to incorporate time-related interactions such as those from 3D simulations into a traditional PRA model.
The Defense Waste Processing Facility (DWPF) began processing Sludge Batch 6 (SB6), also referred to as Macrobatch 7 (MB7), in June 2010. SB6 is a blend of the heel of Tank 40 from Sludge Batch 5 (SB5), H-Canyon Np transfers and SB6 that was transferred to Tank 40 from Tank 51.1 SB6 was processed using Frit 418. Sludge is received into the DWPF Chemical Processing Cell (CPC) and is processed through the Sludge Receipt and Adjustment Tank (SRAT) and Slurry Mix Evaporator Tank (SME). The treated sludge slurry is then transferred to the Melter Feed Tank (MFT) and fed to the melter. During processing of each sludge batch, the DWPF is required to take at least one glass sample to meet the objectives of the Glass Product Control Program (GPCP) and to complete the necessary Production Records so that the final glass product may be disposed of at a Federal Repository. The DWPF requested various analyses of radioactive glass samples obtained from the melter pour stream during processing of SB6 as well as reduction/oxidation (REDOX) analysis of MFT samples to determine the impact of Argon bubbling. Sample analysis followed the Task Technical and Quality Assurance Plan (TTQAP) and an Analytical Study Plan (ASP). Four Pour Stream (PS) glass samples and two MFT slurry samples were delivered to the Savannah River National Laboratory (SRNL) from the DWPF. Table 1-1 lists the sample information for each pour stream glass sample. SB6 PS3 (S03472) was selected as the official pour stream sample for SB6 and full analysis was requested. This report details the visual observations of the as-received SB6 PS No.3 glass sample as well as results for the chemical composition, Product Consistency Test (PCT), radionuclide content, noble metals, and glass density. REDOX results will be provided for all four pour stream samples and vitrified samples of MFT-558 and MFT-568A. Where appropriate, data from other pour stream samples will be provided.
An integrated approach to dynamic testing and mathematical model analysis is described. The overall approach addresses four key tasks, namely, pretest planning and analysis, test data acquisition, data reduction and analysis, and test/analysis correlation and mathematical model updates. Several key software programs are employed to accomplish this task. They are a leading finite element code, a sophisticated data analysis processor and a graphical pre- and post-processor along with an advanced interface utility. Several practical structures are used to illustrate tools and concepts employed in the integrated test analysis process.
Information theoretic analysis and subjective paired-comparison and task ranking techniques were employed in order to scale the workload of 20 communications-related tasks frequently performed by the captain and first officer of transport category aircraft. Tasks were drawn from taped conversations between aircraft and air traffic controllers (ATC). Twenty crewmembers performed subjective message comparisons and task rankings on the basis of workload. Information theoretic results indicated a broad range of task difficulty levels, and substantial differences between captain and first officer workload levels. Preliminary subjective data tended to corroborate these results. A hybrid scale reflecting the results of both the analytical and the subjective techniques is currently being developed. The findings will be used to select representative sets of communications for use in high fidelity simulation.
The purpose of this task is the acquisition, distribution, archival, and analysis of data collected during and in support of the Upper Atmospheric Research Program (UARP) field experiments. Meteorological and U2 data from the 1984 Stratosphere-Troposphere Exchange Project (STEP) was analyzed to determine characteristics of internal atmospheric waves. CDROM's containing data from the 1987 STEP, 1987 Airborne Antarctic Ozone Expedition (AAOE), and the 1989 Airborne Arctic Stratospheric Expedition (AASE) were produced for archival and distribution of those data sets. The AASE CDROM contains preliminary data and a final release is planned for February 1990. Comparisons of data from the NASA ER-2 Meteorological Measurement System (MMS) with radar tracking and radiosonde data show good agreement. Planning for a Meteorological Support Facility continues. We are investigating existing and proposed hardware and software to receive, manipulate, and display satellite imagery and standard meteorological analyses, forecasts, and radiosonde data.
The NASA Ares I Crew Launch Vehicle is being designed to support missions to the International Space Station (ISS), to the Moon, and beyond. The Ares I is undergoing design and development utilizing commercial-off-the-shelf tools and hardware when applicable, along with cutting edge launch technologies and state-of-the-art design and development. In support of the vehicle s design and development, the Ares Functional Fault Analysis group was tasked to develop an Ares Vehicle Diagnostic Model (AVDM) and to demonstrate the capability of that model to support failure-related analyses and design integration. One important component of the AVDM is the Upper Stage (US) Thrust Vector Control (TVC) diagnostic model-a representation of the failure space of the US TVC subsystem. This paper first presents an overview of the AVDM, its development approach, and the software used to implement the model and conduct diagnostic analysis. It then uses the US TVC diagnostic model to illustrate details of the development, implementation, analysis, and verification processes. Finally, the paper describes how the AVDM model can impact both design and ground operations, and how some of these impacts are being realized during discussions of US TVC diagnostic analyses with US TVC designers.
NASA is currently working on developing its predictive modeling capabilities to support future missions that require long term storage of cryogenic propellants. Through the Evolvable Cryogenics project, Development and Validation of Analysis Tools (DVAT) task, both CFD and multi-node fluid modeling tools are being validated against to increase the following cryogenic fluid management technologies: Self-Pressurization, Pressure Control, Helium Pressurization, de-stratification, jet mixing, Tank and transfer line chill-down, tank filling and transfer. NASA is using previous and future micro-gravity experiments to validate both types of models. Recent activities include: Validation of the Tank Pressure Control Experiment (TPCE), Hydrogen and Helium pressurization, and Completion of the Zero Boil Off Tank (ZBOT) experiment on ISS. Future activities include validation of the ZBOT experiment with both CFD and multi-node analysis tools, validation of the Cryogenic Demonstration System of the Robotic Refueling Mission (RRM3).