Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “THERMONUCLEAR DEVICES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Secondary electron emission and the bifurcation of the heat flux to the targets in fusion plasmas

The presence of secondary electron emission (SEE) from plasma facing components in fusion devices can result in a strong localization of the heat flux from plasma to the wall and subsequent wall erosion. Usually, the impact of the SEE is considered assuming the Maxwellian distribution of the electrons coming to the surface. As a result, the SEE coefficient only depends on the temperature of primary electrons. However, the tail of primary electron distribution function in the scrape off layer (SOL) of fusion devices can be far from Maxwellian due to preferential loss of fast electrons. Consequently, it is shown that the SEE coefficient will depend on the wall potential and multiple solutions can be possible corresponding to different regimes of plasma flow to the wall: with and without SEE effects. This effect can cause two-slope electron temperature profiles in the SOL, which are often seen in experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Lower Hybrid Wave Induced SOL Emissivity Variation at High Density on the Alcator C-Mod Tokamak

Lower Hybrid Current Drive (LHCD) in the Alcator C-Mod tokamak provides current profile control for the generation of Advanced Tokamak (AT) plasmas. Non-thermal electron bremsstrahlung emission decreases dramatically at n-bar{sub e}>1{center_dot}10{sup 20}[m{sup -3}] for diverted discharges, indicating low current drive efficiency. It is suggested that Scrape-Off-Layer (SOL) collisional absorption of LH waves is the cause for the absence of non-thermal electrons at high density. VUV and visible spectroscopy in the SOL provide direct information on collision excitation processes. Deuterium Balmer-, Lyman- and He-I transition emission measurements were used for initial characterization of SOL electron-neutral collisional absorption. Data from Helium and Deuterium LHCD discharges were characterized by an overall increase in the emissivity as well as an outward radial shift in the emissivity profile with increasing plasma density and applied LHCD power. High-temperature, high-field (T{sub e} = 5keV,B{sub t} = 8T) helium discharges at high density display increased non-thermal signatures as well as reduced SOL emissivity. Variations in emissivity due to LHCD were seen in SOL regions not magnetically connected to the LH Launcher, indicating global SOL effects due to LHCD.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Direct Measurement of Current Filament Structures in a Magnetic-Confinement Fusion Device

Turbulent structures detected in the edge plasma of fusion devices, often described as blobs, are generally believed to be responsible for confinement degradation. Recent experimental evidence and theories have suggested their filamentary electromagnetic nature. In this Letter the first direct experimental measurements of the parallel current density associated with turbulent structures in a fusion experiment are reported. The electromagnetic nature of structures is clearly shown by identifying the current filaments with a vortexlike velocity pattern and the associated pressure perturbation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Tritium accountancy in fusion systems

The US Department of Energy (DOE) has clearly defined requirements for nuclear material control and accountability (MCA) of tritium whereas the International Atomic Energy Agency (IAEA) does not since tritium is not a fissile material. MCA requirements are expected for tritium fusion machines and will be dictated by the host country or regulatory body where the machine is operated. Material Balance Areas (MBA) are defined to aid in the tracking and reporting of nuclear material movements and inventories. Material sub-accounts (MSA) are established along with key measurement points (KMP) to further subdivide a MBA to localize and minimize uncertainties in the inventory difference (ID) calculations for tritium accountancy. Fusion systems try to minimize tritium inventory which may require continuous movement of material through the MSA. The ability of making meaningful measurements of these material transfers is described in terms of establishing the MSA structure to perform and reconcile ID calculations. For fusion machines, changes to the traditional ID equation will be discussed which includes breeding, burn-up, and retention of tritium in the fusion device. The concept of 'net' tritium quantities consumed or lost in fusion devices is described in terms of inventory taking strategies and how it is used to track the accumulation of tritium in components or fusion machines. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Characteristics of a high-power RF source of negative hydrogen ions for neutral beam injection into controlled fusion devices

An injector of hydrogen atoms with an energy of 0.5–1 MeV and equivalent current of up to 1.5 A for purposes of controlled fusion research is currently under design at the Budker Institute of Nuclear Physics, Siberian Branch, Russian Academy of Sciences. Within this project, a multiple-aperture RF surface-plasma source of negative hydrogen ions is designed. The source design and results of experiments on the generation of a negative ion beam with a current of >1 A in the long-pulse mode are presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Finite-temperature corrections to the time-domain equations of motion for perpendicular propagation in nonuniform magnetized plasmas

In this paper we extend the new techniques of W. Tierens and D. D. Zutter, J. Comput. Phys. 231, 5144 (2012) to include finite Larmor radius effects up to second order in the Larmor radius. We limit ourselves to the case of propagation perpendicular to the background magnetic field B(vector sign){sub 0}. We show that our time-domain technique is able to produce the lowest-order Bernstein wave (a wave believed to be useful for heating fusion devices [H. P. Laqua, Plasma Phys. Controlled Fusion 49, R1 (2007)]). The discrete equations retain many of the favourable properties described in W. Tierens and D. D. Zutter, J. Comput. Phys. 231, 5144 (2012), i.e., unconditional stability and a straightforward relation between the second-order accurate continuous dispersion relation and the dispersion relation of the discretized problem. The theory is illustrated by a place-independent and a place-dependent temperature numerical example.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Nuclear analysis generic requirements for fusion applications of radiation shielding - 25639

Radiation shielding engineering and associated nuclear analysis plays an important role in design, operation, maintenance and decommissioning of nuclear fusion devices. Requirements adopted in current analyses are investigated versus basic principles of requirement management and verification and validation aspects. An assessment is proposed to derive applicable product and process requirements from safety principles and transversal function requirements. V and V aspects are extended to cover input and output data. It is concluded that beyond the progress on computational capabilities and technical quality of fusion neutronics shielding analysis, there is the need to develop the underlying procedures and requirement management to satisfy configuration management, quality assurance and safety demonstration needs. (authors)

61 RADIATION PROTECTION AND DOSIMETRY↗

Plasma Cleaning of Oxides from Surfaces: The State of the Art

It was discovered several decades ago that wall cleaning procedures, primarily to remove the light impurities C and O, were an important part of preparing fusion devices for plasma operation. Since that time, conditioning procedures making use of low-temperature plasmas in different gasses have become more elaborate, and have also found application in other fields. However, there are still many questions remaining with regard to the cleaning efficiency, and the most appropriate method for reducing impurity concentrations in the shortest time. In this paper, a short review is given, outlining the current status of removing oxygen from metal surfaces by the application of low-temperature plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Bunker probe: A plasma potential probe almost insensitive to its orientation with the magnetic field

Due to their ability to suppress a large part of the electron current and thus measuring directly the plasma potential, ion sensitive probes have begun to be widely tested and used in fusion devices. For these probes to work, almost perfect alignment with the total magnetic field is necessary. This condition cannot always be fulfilled due to the curvature of magnetic fields, complex magnetic structure, or magnetic field reconnection. In this perspective, we have developed a plasma potential probe (named Bunker probe) based on the principle of the ion sensitive probe but almost insensitive to its orientation with the total magnetic field. Therefore it can be used to measure the plasma potential inside fusion devices, especially in regions with complex magnetic field topology. Experimental results are presented and compared with Ball-Pen probe measurements taken under identical conditions. We have observed that the floating potential of the Bunker probe is indeed little affected by its orientation with the magnetic field for angles ranging from 90° to 30°, in contrast to the Ball-Pen probe whose floating potential decreases towards that of a Langmuir probe if not properly aligned with the magnetic field.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Potential design problems for ITER fusion device

The international thermonuclear experimental reactor (ITER) is a worldwide project currently being built in France for the demonstration of the feasibility of thermonuclear technologies for future realization of successful commercial fusion energy. ITER is of the tokamak based design using strong magnetic fields to confine the very hot plasma needed to induce the fusion reaction. Tokamak devices are currently the front leading designs. Building a successful magnetic fusion device for energy production is of great challenge. A key obstacle to such design is the performance during abnormal events including plasma disruptions and so-called edge-localized modes (ELMs). In these events, a massive and sudden release of energy occurs quickly, due to loss of full or partial plasma confinement, leading to very high transient power loads on the reactor surface boundaries. A successful reactor design should tolerate several of these transient events without serious damages such as melting and vaporization of the structure. This paper highlights, through comprehensive state-of-the-art computer simulation of the entire ITER interior design during such transient events, e.g., ELMs occurring at normal operation and disruptions during abnormal operation, potential serious problems with current plasma facing components (PFCs) design. The HEIGHTS computer package is used in these simulations. The ITER reactor design was simulated in full and exact 3D geometry including all known relevant physical processes involved during these transient events. The current ITER divertor design may not work properly and may requires significant modifications or new innovative design to prevent serious damage and to ensure successful operation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Basic plasma physics experiments and modeling of space phenomena on a large inductively coupled magnetoplasma device

Large KROT device is developed for modeling of space plasma physics phenomena and studies of interaction of super-strong electromagnetic radiation with plasmas. The core of the facility is pulsed RF plasma source with MW power level. Well repeated and highly uniform plasma, magnetized or not, can be produced in a volume of several tens of cubic meters. An overview of the facility operational parameters is presented along with the results of recent experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Energy Transfer and Dual Cascade in Kinetic Magnetized Plasma Turbulence

The question of how nonlinear interactions redistribute the energy of fluctuations across available degrees of freedom is of fundamental importance in the study of turbulence and transport in magnetized weakly collisional plasmas, ranging from space settings to fusion devices. In this Letter, we present a theory for the dual cascade found in such plasmas, which predicts a range of new behavior that distinguishes this cascade from that of neutral fluid turbulence. These phenomena are explained in terms of the constrained nature of spectral transfer in nonlinear gyrokinetics. Accompanying this theory are the first observations of these phenomena, obtained via direct numerical simulations using the gyrokinetic code AstroGK. The basic mechanisms that are found provide a framework for understanding the turbulent energy transfer that couples scales both locally and nonlocally.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Diffusion coefficients of Fokker-Planck equation for rotating dust grains in a fusion plasma

In the fusion devices, ions, H atoms, and H{sub 2} molecules collide with dust grains and exert stochastic torques which lead to small variations in angular momentum of the grain. By considering adsorption of the colliding particles, thermal desorption of H atoms and normal H{sub 2} molecules, and desorption of the recombined H{sub 2} molecules from the surface of an oblate spheroidal grain, we obtain diffusion coefficients of the Fokker-Planck equation for the distribution function of fluctuating angular momentum. Torque coefficients corresponding to the recombination mechanism show that the nonspherical dust grains may rotate with a suprathermal angular velocity.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A fast solver for the gyrokinetic field equation with adiabatic electrons

Describing turbulence and microinstabilities in fusion devices is often modelled with the gyrokinetic equation. During the time evolution of the distribution function a field equation for the electrostatic potential needs to be solved. In the case of adiabatic electrons it contains a flux-surface-average term resulting in an integro-differential equation. Its numerical solution is time and memory intensive for three-dimensional configurations. Here a new algorithm is presented which only requires the numerical inversion of a simpler differential operator and a subsequent addition of a correction term. This new procedure is as fast as solving the equation without the surface average.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Driving rotamak currents with minimal power dissipation

The Rotamak is a proposed thermonuclear fusion device which employs rotating magnetic fields (RMF) to generate an azimuthal current to produce a field-reversed configuration. The efficiency of the currents that produce the field reversal by RMFs was debated some 40 years ago. The debate revolved around whether the currents would incur dissipation by the conventional Spitzer perpendicular resistivity, or whether some other relation between current and dissipation would be more appropriate. By employing an electron–ion pitch-angle scattering model, we find that the dissipation is non-Spitzer in nature. However, curiously, there appears to exist a regime where the power dissipated to maintain the current becomes vanishingly small.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Visualization of the operational space of edge-localized modes through low-dimensional embedding of probability distributions

Information visualization aimed at facilitating human perception is an important tool for the interpretation of experiments on the basis of complex multidimensional data characterizing the operational space of fusion devices. This work describes a method for visualizing the operational space on a two-dimensional map and applies it to the discrimination of type I and type III edge-localized modes (ELMs) from a series of carbon-wall ELMy discharges at JET. The approach accounts for stochastic uncertainties that play an important role in fusion data sets, by modeling measurements with probability distributions in a metric space. The method is aimed at contributing to physical understanding of ELMs as well as their control. Furthermore, it is a general method that can be applied to the modeling of various other plasma phenomena as well.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Divertor for a linear fusion device

Linear fusion devices can use large magnetic flux flaring in the end tanks to reduce the heat load on the end structures. In order to reduce parallel electron heat loss, one has to create conditions where the neutral gas density in the end tanks is low, as otherwise cold electrons produced by the ionization of the neutrals would cool down the core plasma electrons. The processes determining the neutral gas formation and spatial distribution are analysed for the case where neutrals are formed by the surface recombination of the outflowing plasma. The conditions under which the cooling of the core plasma is negligible are formulated.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Turbulent transport of fast ions in the Large Plasma Device

Strong drift wave turbulence is observed in the Large Plasma Device [H. Gekelman et al., Rev. Sci. Instrum. 62, 2875 (1991)] on density gradients produced by a plate limiter. Energetic lithium ions orbit through the turbulent region. Scans with a collimated ion analyzer and with Langmuir probes give detailed profiles of the fast ion spatial distribution and the fluctuating fields. The fast ion transport decreases rapidly with increasing fast ion gyroradius. Unlike the diffusive transport caused by Coulomb collisions, in this case the turbulent transport is nondiffusive. Analysis and simulation suggest that such nondiffusive transport is due to the interaction of the fast ions with stationary two-dimensional electrostatic turbulence.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗