Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Synthetic Fuel”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Enhanced Iodine Capture Using a Postsynthetically Modified Thione–Silver Zeolitic Imidazole Framework

Efficient management of radionuclides that are released from various processes in the nuclear fuel cycle is of significant importance. Among these nuclides, radioactive iodine (mainly 129 I and 131 I) is a major concern due to the risk it poses to the environment and to human health; thus, the development of materials that can capture and safely store radioactive iodine is crucial. Herein, a novel silver-thione-functionalized zeolitic imidazole framework (ZIF) was synthesized via post-synthetic modification and assessed for its iodine uptake capabilities alongside the parent ZIF-8 and intermediate materials. A solvent-assisted ligand exchange procedure was used to replace the 2-methylimidazole linkers in ZIF-8 with 2-mercaptoimidazole, forming the intermediate compound ZIF-8=S, which was reacted with AgNO 3 to yield the ZIF-8=S-Ag + composite for iodine uptake. Despite possessing the lowest BET surface area of the derivatives, the Ag-functionalized material demonstrated superior I 2 adsorption in terms of both maximum capacity (550 g I 2 /mol) and rapid kinetics (50% loading achieved in 5 hrs, saturation in 50 hrs) compared to our pristine ZIF-8, which reached 450 g I 2 /mol after 150 hours and 50% loading in 25 hours. This improvement is attributed to the presence of the Ag + ions, which provide a strong chemical driving force to form stable Ag-I species. In conclusion, the results of this study contribute to a broader understanding of the strategies that can be employed to engineer adsorbents with robust iodine uptake behavior.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Assessing Edge Localized Mode (ELM) Mitigation by Pellet Triggering in Smallest-Possible Affordable Robust Compact (SPARC) Low-Collisionality Discharges

Simulations of pellet edge-localized mode (ELM) triggering with the M3D-C1 code confirmed experimentally observed pellet mass thresholds in low-collisionality DIII-D discharges and predicted extremely large thresholds in ITER [A. Wingen et al, Nucl. Fusion 64, 066015(2024)]. The linear (static) and nonlinear (dynamic) workflows developed in this previous work are now applied to the SPARC tokamak. Multiple synthetic equilibria for the high-performance H-mode scenario are tested for MHD stability without pellets using the linear workflow and ELITE simulations; a stable one is identified. Pellets of various mass are injected along an inboard, near-midplane trajectory in the M3D-C1 simulation. No pellet mass threshold for ELM triggering can be found for realistic pellet masses, concluding that fueling from this injection location would not trigger ELMs. A poloidal scan of possible injection locations shows very high thresholds on the high-field side and reasonable thresholds on the low-field-side (LFS). Based on results of this work the location for a LFS injection was finalized in the SPARC design. For this LFS injection the pellet mass threshold is determined using the linear workflow, aligning well with the poloidal scan.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Assessing Edge Localized Mode (ELM) Mitigation by Pellet Triggering in Smallest-Possible Affordable Robust Compact (SPARC) Low-Collisionality Discharges

Simulations of pellet edge-localized mode (ELM) triggering with the M3D-C1 code confirmed experimentally observed pellet mass thresholds in low-collisionality DIII-D discharges and predicted extremely large thresholds in ITER. The linear (static) and nonlinear (dynamic) workflows developed in this previous work are now applied to the SPARC tokamak. Multiple synthetic equilibria for the high-performance H-mode scenario are tested for MHD stability without pellets using the linear workflow and ELITE simulations; a stable one is identified. Pellets of various mass are injected along an inboard, near-midplane trajectory in the M3D-C1 simulation. No pellet mass threshold for ELM triggering can be found for realistic pellet masses, concluding that fueling from this injection location would not trigger ELMs. A poloidal scan of possible injection locations shows very high thresholds on the high-field side and reasonable thresholds on the low-field-side (LFS). Based on results of this work the location for a LFS injection was finalized in the SPARC design. For this LFS injection the pellet mass threshold is determined using the linear workflow, aligning well with the poloidal scan.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS2021

Aboveground and Belowground Responses to Cyanobacterial Biofertilizer Supplement in a Semi-Arid, Perennial Bioenergy Cropping System

The need for sustainable agricultural practices to meet the food, feed, and fuel demands of a growing global population while reducing detrimental environmental impacts has driven research in multi-faceted approaches to agricultural sustainability. Perennial cropping systems and microbial biofertilizer supplements are two emerging strategies to increase agricultural sustainability that are studied in tandem for the first time in this study. During the establishment phase of a perennial switchgrass stand in SW Montana, USA, we supplemented synthetic fertilization with a nitrogen-fixing cyanobacterial biofertilizer (CBF) and were able to maintain aboveground crop productivity in comparison to a synthetic only (urea) fertilizer treatment. Soil chemical analysis conducted at the end of the growing season revealed that late-season nitrogen availability in CBF-supplemented field plots increased relative to urea-only plots. High-throughput sequencing of bacterial/archaeal and fungal communities suggested fine-scale responses of the microbial community and sensitivity to fertilization among arbuscular mycorrhizal fungi, Planctomycetes, Proteobacteria, and Actinobacteria. Given their critical role in plant productivity and soil nutrient cycling, soil microbiome monitoring is vital to understand the impacts of implementation of alternative agricultural practices on soil health.

biofertilizer↗
DOE OSTI2020

Metabolic engineering of Zymomonas mobilis for anaerobic isobutanol production

Biofuels and value-added biochemicals derived from renewable biomass via biochemical conversion have attracted considerable attention to meet global sustainable energy and environmental goals. Isobutanol is a four-carbon alcohol with many advantages that make it attractive as a fossil-fuel alternative. Zymomonas mobilis is a highly efficient, anaerobic, ethanologenic bacterium making it a promising industrial platform for use in a biorefinery. In this study, the effect of isobutanol on Z. mobilis was investigated, and various isobutanol-producing recombinant strains were constructed. The results showed that the Z. mobilis parental strain was able to grow in the presence of isobutanol below 12 g/L while concentrations greater than 16 g/L inhibited cell growth. Integration of the heterologous gene encoding 2-ketoisovalerate decarboxylase such as kdcA from Lactococcus lactis is required for isobutanol production in Z. mobilis. Moreover, isobutanol production increased from nearly zero to 100-150 mg/L in recombinant strains containing the kdcA gene driven by the tetracycline-inducible promoter Ptet. In addition, we determined that overexpression of a heterologous als gene and two native genes (ilvC and ilvD) involved in valine metabolism in a recombinant Z. mobilis strain expressing kdcA can divert pyruvate from ethanol production to isobutanol biosynthesis. This engineering improved isobutanol production to above 1 g/L. Finally, recombinant strains containing both a synthetic operon, als-ilvC-ilvD, driven by Ptet and the kdcA gene driven by the constitutive strong promoter, Pgap, were determined to greatly enhance isobutanol production with a maximum titer about 4.0 g/L. Finally, isobutanol production was negatively affected by aeration with more isobutanol being produced in more poorly aerated flasks. This study demonstrated that overexpression of kdcA in combination with a synthetic heterologous operon, als-ilvC-ilvD, is crucial for diverting pyruvate from ethanol production for enhanced isobutanol biosynthesis. Moreover, this study also provides a strategy for harnessing the valine metabolic pathway for future production of other pyruvate-derived biochemicals in Z. mobilis.

09 BIOMASS FUELS↗
DOE OSTI2025

Process design and techno-economic analysis for bio-based graphite and liquid hydrocarbons production from lignocellulosic biomass

The worldwide demand for graphite, as the main anode material for Li-ion batteries, is expected to double by 2028 since it supports the use of electricity, including transient renewable sources, for energy storage, sustainable mobility, and automation. However, the dependence on non-renewable and external resources jeopardizes the world supply chain. This study explores the technical and economic performance of transforming lignocellulosic biomass into biographite and fuel-grade hydrocarbons through pyrolysis bio-oil upgrading. According to simulation results, the total power demand for the biorefinery reached 10,784 kWh per tonne of biographite, of which 36 % can be supplied by the heat integration network and power plant. Sensitivity and risk analyses were conducted to evaluate the economics, with process yields identified as the most relevant indicators to the minimum selling price (MSP). The analysis revealed a promising cost-competitive range for biographite MSP against fossil-based graphite (medium quality synthetic graphite Chinese market price ~$\$$4.2/kg). Case D, which includes biofuels as a byproduct, presents the best metrics, reaching a MSP of $\$$3.3/kg of anode-grade biographite with a profit margin of 27 %. While including biofuels in the product slate provides the best economic performance, the uncertainty associated with the big capital investment makes its risk 13 % higher to attain an IRR >20 % than the case in which biographite is produced as a standalone product. Overall, this study demonstrates that integrated biorefineries can produce a cost-competitive bio-based anode material for Li-ion batteries.

09 BIOMASS FUELS↗
NASA NTRS1978

A systems examination of the opportunities of coal for California

Because of decreasing availability of petroleum fuels and natural gas, it is imperative that alternative means be developed for meeting demands. The options available for importing energy derived from coal are examined. These include: (1) electric power generated from coal; (2) coal gasification near the mine site for conversion to substitute natural gas or liquid products such as methanol or hydrocarbons; and (3) converting the coal directly to liquid hydrocarbons similar to a synthetic crude oil. Comment is made on the long lead times required between conception and completion of facilities of this type. Because of political and economic impediments, excessive delays have resulted in cancellation of projects. The need for statesmen and citizens with vision and courage to act is summarized.

Hathaway, W. M.↗
NASA NTRS2019

The Effect of Turbulence Modeling on the Mixing Characteristics of Several Fuel Injectors at Hypervelocity Flow Conditions

CFD analysis is presented on the effects of turbulence modeling choices on the mixing characteristics and performance of three fuel injectors at hypervelocity flow conditions. The analyses were carried out with the VULCAN-CFD solver using Reynolds-Averaged Simulations (RAS). The hypervelocity flow conditions match the high Mach number flow of the experiments conducted as a part of the Enhanced Injection and Mixing Project (EIMP) at the NASA Langley Research Center. The three injectors are the baseline configurations used in the experiments and represent three categories of injectors typically considered individually or in combination for fueling high-speed propulsive devices. The current work discusses the impact of the turbulence model and the turbulent Schmidt number on the mixing flow field behavior and the mixing performance as described by the one-dimensional values of the Mach number, total pressure recovery, and the mixing efficiency. Because planar laser induced fluorescence (PLIF) images are available from the EIMP experiments, the sensitivity of the synthetic LIF signal to turbulence modeling choices is also examined to determine whether PLIF can be extended beyond its intended qualitative visualization purpose and used to guide CFD turbulence model and parameter selections. It is found that the mixing performance, as quantified using mixing efficiency, exhibits a strong sensitivity to both turbulence model choice and turbulent Schmidt number value. However, the synthetic LIF signal only demonstrates a modest level of sensitivity, which suggests that PLIF is of limited use for guiding CFD turbulence model and parameter selections.

Drozda, Tomasz G.↗
DOE OSTI2023

Optimizing the Synthetic Potential of O 2 : Implications of Overpotential in Homogeneous Aerobic Oxidation Catalysis

Molecular oxygen is the quintessential oxidant for organic chemical synthesis, but many challenges continue to limit its utility and breadth of applications. Extensive historical research has focused on overcoming kinetic challenges presented by the ground-state-triplet electronic structure of O 2 and the various reactivity and selectivity challenges associated with reactive oxygen species derived from O 2 reduction. This Perspective will analyze thermodynamic principles underlying catalytic aerobic oxidation reactions, borrowing concepts from the study of the oxygen reduction reaction (ORR) in fuel cells. This analysis is especially important for "oxidase"-type liquid-phase catalytic aerobic oxidation reactions, which proceed by a mechanism that couples two sequential redox half-reactions: (1) substrate oxidation, and (2) oxygen reduction, typically affording H 2 O 2 or H 2 O. The catalysts for these reactions feature redox potentials that lie between the potentials associated with the substrate oxidation and oxygen reduction reactions, and changes in the catalyst potential lead to variations in effective overpotentials for the two half reactions. Catalysts that operate at low ORR overpotential retain more thermodynamic driving force for the substrate oxidation step, enabling O 2 to be used in more challenging oxidations. While catalysts that operate at high ORR overpotential have less driving force available for substrate oxidation, they often exhibit different or improved chemoselectivity relative to the high-potential catalysts. The concepts are elaborated in a series of case studies to highlight their implications for chemical synthesis. Examples include comparisons of (a) NO x /oxoammonium and Cu/nitroxyl catalysts, (b) high-potential quinones and amine oxidase biomimetic quinones, and (c) Pd aerobic oxidation catalysts, with or without NO x cocatalysts. In addition, we show how reductive activation of O 2 provides a means to access potentials not accessible with conventional oxidase-type mechanisms. Altogether, this analysis highlights the central role of catalyst overpotential in guiding the development of aerobic oxidation reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Multi-objective optimization of sustainable aviation fuel production pathways in the U.S. Corn Belt

As a potential source of low-carbon transportation energy, biofuels offer certain advantages over vehicle electrification (e.g., lower societal vulnerability to grid failures, and improved range of sustainable aviation), but also several challenges, including cost, carbon intensity, and land usage. There are also well-founded concerns that biofuel supply chains could be disrupted if extreme weather events impact feedstock yields. In this paper, we explore the use of multi-objective optimization to identify biofuel production pathways that balance cost, greenhouse gas emissions, and supply vulnerability to extreme weather. We compare the use of three different many-objective evolutionary algorithms and linear programming in optimizing biomass cultivation decisions in the U.S. Corn Belt under weather uncertainty using historical, modeled, and synthetic yield data. We consider four feedstock choices (corn, soy, switchgrass, and algae) with two land types (agricultural and marginal lands) and evaluate decisions using three alternative spatial resolutions (ranging from the USDA agricultural district level to the state level). Results show that feedstock choice is the primary driver of objective performance (i.e., the position and shape of 3D, approximate Pareto frontiers). Spatial diversification is a less effective tool in reducing exposure to weather-caused drops in crop yield.

09 BIOMASS FUELS↗
DOE OSTI2022

Monte Carlo N-Particle forward modeling for density reconstruction of double shell capsule radiographs

In the Double Shell Inertial Confinement Fusion concept, characterizing the shape asymmetry of imploding metal shells is vital for understanding energy-efficient compression and radiative losses of the thermonuclear fuel. The Monte Carlo N-Particle MCNP® code forward models radiography of Double Shell capsule implosions using the Advanced Radiographic Capability at the National Ignition Facility. A procedure is developed for using MCNP to reconstruct density profiles from the radiograph image intensity. For a given Double Shell imploding target geometry, MCNP radiographs predict image contrast, which can help guide experimental design. Finally, in future work, the calculated MCNP synthetic radiographs will be compared with experimental radiographs to determine the radial and azimuthal density profiles of the Double Shell capsules.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

SyPro Poplar: Improving Poplar Biomass Production under Abiotic Stress Conditions: an Integrated Omics, Bioinformatics, Synthetic Biology and Genetic Engineering Approach (Final Report)

SyPro Poplar: Improving Poplar Biomass Production under Abiotic Stress Conditions: an Integrated Omics, Bioinformatics, Synthetic Biology and Genetic Engineering Approach In the SyPro Poplar project, we aimed to integrate omics, bioinformatics, synthetic biology, and genetic engineering approaches to develop transgenic poplar trees with sustained photosynthetic activity and increased biomass production under individual and the simultaneous occurrence of water deficit, increased soil salinity, and elevated temperatures. Specifically, we intended to (i) study the functions of selected stress-responsive genes at tissue and cell type-specific levels, (ii) discover novel motifs and construct stress-responsive synthetic promoters, and (iii) use these promoters to drive the expression of genes shown to confer abiotic stress tolerance in a variety of crops and develop abiotic stress-tolerant poplars in a coordinated fashion.

09 BIOMASS FUELS↗
DOE OSTI2020

Synthetic Proteome (CRADA CRD-16-605 Final Report)

There are several areas of interest with regard to advancing renewable energy technology and increasing Participant’s use of renewable energy. Participant would like to collectively work with the National Renewable Energy Laboratory on a variety of projects as outlined in part by the statement of work below.

09 BIOMASS FUELS↗
DOE OSTI2026

Kinetics Modeling and Reactor Design Study of Glucose-to-Terpenes Cell-Free Conversion

Cell-free systems offer many advantages over traditional biological conversion by eliminating biological growth constraints. It also offers easy manipulation and finetuning of the reaction conditions for each individual enzyme. The conversion of cellulosic glucose to Limonene, a terpene, is a promising pathway for producing fuels and chemicals. Recent advances in developing cell-free systems focuses on bench scale optimization of terpene yield and to demonstrate its feasibility towards commercialization [1,2]. There is significant knowledge gap regarding reaction kinetics of these cell-free systems to further study how it will perform at larger scale. We present here, our studies on reaction kinetics and reactor design implications of cell-free glucose to Limonene conversion to facilitate the further development and commercialization of this process. We developed a novel kinetic model based on the metabolic-network structure of the cell-free system with multi-substrate reversible Michaelis-Menten rate law. To estimate kinetic parameters for this system of rate equations, we employed Bayesian optimization to perform global search with the assistance of gaussian processes to balance exploration and exploitation. The model parameters estimated showed good results compared with experimental data. The estimated parameters were used to perform sensitivity analysis. We found that Hexokinase is one of the most critical enzymes that affect the conversion of the glucose. We also observed that abundance of co-factors is also critical to the conversion of glucose to limonene. We investigated packed bed reactors with enzymes immobilized on the surface of particles to convert glucose stream into Limonene for larger scale production. The reactor design such as particle size, enzyme loading, and flow rate are found to be critical for improving yields. [1] Dudley, Q.M., Nash, C.J. and Jewett, M.C., 2019. Synthetic Biology, 4(1), p.ysz003. [2] Korman, T.P., Opgenorth, P.H. and Bowie, J.U., 2017. Nature communications, 8(1), p.15526.

09 BIOMASS FUELS↗
DOE OSTI2021

SOC Synthetic Microstructure Bank

QUICK START: Start with property_library.html (can be found by typing the filename into the query box) and use the interactive table to filter, sort, and select a microstructure with the desired properties. Search for the alphabetic code to obtain the corresponding dataset. Full description: This is a bank of 1,970 unique 3-phase electrode microstructure files. When you account for reassigning phase IDs (e.g. declare that 1=Ni and 2=pore, instead of 1=pore and 2=Ni), it actually represents 5,910 unique electrode microstructures, each of which could be considered to be either an air or a fuel electrode (e.g. declare that the phase IDs correspond to pore, Ni, and YSZ; or that they correspond to pore, LSCF, and GDC; or whatever electron-conductor and ion-conductor combination is being studied). The voxel size is 50 nm and each electrode file contains a 4x4 grid of (12.5 micron)^3 sub-volumes. If placed together in a grid, they comprise a 50x50x12.5 micron electrode (note that the interfaces between sub-volumes will be sharp; this can be mitigated via simulating annealing/relaxation). The sub-volumes can also be used individually for a reasonably sized 12.5 micron cubic region-of-interest. A user can simply consider the voxel size to be a different value to rescale the volumes (and all of their morphological features, including particle size) as desired. These microstructures were generated using DREAM3D. The general procedure is outlined in https://doi.org/10.1016/j.jpowsour.2018.03.025 The file names are an alphabetic code having to do with the input parameters used in DREAM3D when they were generated. Most users would be best served by starting with the file property_library.html or property_library_subvols.html (which lists properties for each individual subvolume). These files contain a catalogue of the actual, measured properties of every microstructure in the database. Any combination of property values can be filtered and sorted until a desired electrode is found, at which point the user can find the file corresponding to that alphabetic code. The properties in the catalogue include connected TPB density, and for each phase: phase fraction, average particle size, polydispersity of particle size, tortuosity, and connected pair-wise interfacial area. They also include what fraction of each property is connected through to the interfaces of the volume. If the desired combination of properties is not found at first, remember that the phase IDs can be re-assigned arbitrarily, e.g. swapping 1s and 2s. In fact, the database was generated with this in mind so as not to generate redundant microstructures. If the database does not contain the desired property combinations, try to search for the other possible permutations of those properties with re-assigned phase IDs. Please cite https://doi.org/10.1149/10301.0909ecst for use. Please contact the maintainer, William K. Epting, for additional information or assistance.

3D microstructure↗
DOE OSTI2024

Dynamic data-driven multiscale modeling for predicting the degradation of a 316L stainless steel nuclear cladding material

Here, we have developed a long short-term memory stacked ensemble (LSTM-SE) surrogate modeling approach that can provide rapid predictions of microstructural evolution and the resultant mechanical properties of American Iron and Steel Institute (AISI) 316L series stainless steel (316LSS) fuel cladding under conditions of varying temperature and radiation dose rate. To acquire training data, we developed and implemented a kinetic Monte Carlo (KMC) model to simulate precipitation kinetics of M 23 C 6 , γ', and G phases within SS316L cladding. Experimentally reported precipitation kinetics of SS316L in literature were linked to the kinetic parameters of the simulated precipitation in our KMC model. The model was then used to simulate microstructure evolution under synthetically generated treatments of varying temperature and radiation dose rate, for periods of up to 3000 hours. Changes in volume fraction, number density, and particle size of precipitates were recorded, and particle area fractions were correlated using statistical methods to develop the surrogate model. Simultaneously, the mechanical properties of the simulated microstructures were evaluated using microstructure-based finite element method (FEM) analysis to determine the elastic modulus, yield stress, ultimate tensile strength, and elongation to failure of the aged microstructures. Using this approach, our surrogate model can predict precipitation behavior within 0.25% volume fraction and mechanical properties within 6% relative error from the values predicted by the KMC and FEM models using 50 training simulations as input. The trained recurrent neural network-based model can return estimations of precipitation kinetics and mechanical properties ~1000 times faster than the physics-based codes. This work demonstrates, as a proof of concept, that reactor material service lifetimes under variable service conditions can be predicted for a statistics-based model from a practicably obtainable dataset.

36 MATERIALS SCIENCE↗
DOE OSTI2024

A pilot oral history of plant synthetic biology

The whole field of synthetic biology (SynBio) is only about 20 years old, and plant SynBio is younger still. Nevertheless, within that short time, SynBio in general has drawn more scientific, philosophical, government, and private-sector interest than anything in biology since the recombinant DNA revolution. Plant SynBio, in particular, is now drawing more and more interest in relation to plants’ potential to help solve planetary problems such as carbon capture and storage and replacing fossil fuels and feedstocks. As plant SynBio is so young and so fast-developing, we felt it was too soon to try to analyze its history. Instead, we set out to capture the essence of plant SynBio's origins and early development through interviews with 8 of the field's founders, representing 5 countries and 3 continents. We then distilled these founders’ personal recollections and reflections into this review, centering the narrative on timelines for pivotal events, articles, funding programs, and quoting from interviews. We have archived the interview recordings and documented timeline entries. This work provides a resource for future historical scholarship.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Dynamic Data-Driven Multiscale Modeling for Predicting Microstructure and Mechanical Properties of 316L Stainless Steel

We have developed a long short-term memory stacked ensemble (LSTM-SE) surrogate modeling approach that can provide rapid predictions of microstructural evolution and the resultant mechanical properties of American Iron and Steel Institute (AISI) 316L series stainless steel (316LSS) fuel cladding under conditions of varying temperature and radiation dose rate. To acquire training data, we developed and implemented a kinetic Monte Carlo (KMC) model to simulate precipitation kinetics of M 23 C 6 , γ', and G phases within SS316L cladding. Experimentally reported precipitation kinetics of SS316L in literature were linked to the kinetic parameters of the simulated precipitation in our KMC model. The model was then used to simulate microstructure evolution under synthetically generated treatments of varying temperature and radiation dose rate, for periods of up to 3000 hours. Changes in volume fraction, number density, and particle size of precipitates were recorded, and particle area fractions were correlated using statistical methods to develop the surrogate model. Simultaneously, the mechanical properties of the simulated microstructures were evaluated using microstructure-based finite element method (FEM) analysis to determine the elastic modulus, yield stress, ultimate tensile strength, and elongation to failure of the aged microstructures. Using this approach, our surrogate model can predict precipitation behavior within 0.25% volume fraction and mechanical properties within 6% relative error from the values predicted by the KMC and FEM models using 50 training simulations as input. The trained recurrent neural network-based model can return estimations of precipitation kinetics and mechanical properties ~1000 times faster than the physics-based codes. This work demonstrates, as a proof of concept, that reactor material service lifetimes under variable service conditions can be predicted for a statistics-based model from a practicably obtainable dataset.

36 MATERIALS SCIENCE↗