Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Spectral shape”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Investigation of infrared spectra of atmospheric gases to support stratospheric spectroscopic investigations

Four papers are presented which discuss the following: information measures in nonlinear experimental design; information in spectra of collision broadened absorption lines; band analysis by spectral curve fitting; and least squares analysis of Voight shaped lines. Abstracts of five research papers on which the author collaborated and which were delivered at the 34th Symposium of Molecular Spectroscopy (Ohio State University, June 1979) are included along with a subroutine for use with BMDP3R to retrieve the parameters of 10 Voight shaped lines.

Shaw, J. H.↗

A new inversion method of remote sounding of planetary atmospheres

A new inversion method for remote sounding of planetary atmospheres is presented which appears to have several significant advantages over the conventional methods. This method is applicable to high-resolution observations where the spectral lines are fully resolved and is based on matching the calculated slopes of the spectral line profiles with slopes of the observed line shapes. The method is applied to inversion of ozone absorption lines in the earth's atmosphere, and the results are compared with those obtained by a conventional method. The proposed method is seen to provide a significant improvement in the overall accuracy of the retrieved profiles, with higher vertical resolution and higher levels which may be probed.

Abbas, M. M.↗

Exact modeling of lineshape and wavenumber variations for off-axis detectors in Fourier transform spectrometers (FTS) sensor systems

The utilization of detector arrays in the focal planes of FTS sensor systems allows simultaneous spectral and spatial measurements. However, spectral lineshapes and wavenumber locations depend upon the size and location of the detector elements with respect to the Haidinger fringe pattern of the FTS sensor. These spectral distortions can be generalized as a shift and shape change of the FTS sensor lineshape. Depending on the distortions that can be tolerated, a degree of field-widening can be obtained for a given Haidinger fringe pattern. An exact model for predicting the FTS lineshape distortions is presented. The model is applied to several contemporary applications in order to quantify the magnitude of distortions to be expected.

Niple, E.↗

HEAO 3 observations of the Crab pulsar

The Crab pulsar (PSR 0531+21) is the only pulsar which has been observed throughout almost the entire electromagnetic spectrum from 0.5 keV to over 2000 GeV. In general, the emission from the Crab nebula and its pulsar has been remarkably constant in time (except for the pulsations). However, several recent observations, especially of gamma-ray line emission, indicate possible time variations. The present investigation is concerned with the data obtained with the HEAO C-1 experiment. The data have been studied with the hope of finding information regarding a number of questions, taking into account the existence of line emission from the pulsar, the variation of the shape of the light curve with time, and the spectral variations as a function of pulsar phase. The spectrum of the total phase-averaged pulsed emission is found to be consistent with a single power-law spectrum from 50 keV to 10 MeV.

Mahoney, W. A.↗

Mapping and spectroscopy of the 3.3 microns feature in Orion

The results of spectroscopy of the 3.3 microns feature, H2 emission, and Br alpha, obtained in a spatial cut across the Orion ionization front are presented. The spatial distribution of the 3.3 microns feature peaks between the ionization front and the H2 peak are observed. The shape of the 3.3 microns feature observed at high spectral resolution shows no changes in regions of varying ultraviolet flux and density. The results are discussed in terms of current models for the 3.3 microns emission feature.

Sellgren, K.↗

The Achromatic Light Curve of the Optical Afterglow of GRB 030226 at a Redshift of z Approximately 2

Abstract. We report on optical and near-infrared (NIR) follow-up observations of the afterglow of GRB 030226, mainly performed with the telescopes at ESO La Silla and Paranal, with additional data obtained at other places. Our first observations started 0.2 days after the burst when the afterglow was at a magnitude of R approximately equal to 19 . One week later the magnitude of the afterglow had fallen to R=25, and at two weeks after the burst it could no longer be detected (R > 26). Our VLT blueband spectra show two absorption line systems at redshifts z = 1.962 +/- 0.001 and at z = 1.986 +/- 0.001, placing the redshift of the burster close to 2. Within our measurement errors no evidence for variations in the line strengths has been found between 0.2 and 1.2 days after the burst. An overabundance of alpha-group elements might indicate that the burst occurred in a chemically young interstellar region shaped by the nucleosynthesis from type II supernovae. The spectral slope of the afterglow shows no signs for cosmic dust along the line of sight in the GRB host galaxy, which itself remained undetected (R > 26.2). At the given redshift no supernova component affected the light from the GRB afterglow, so that the optical transient was essentially only powered by the radiation from the GRB fireball, allowing for a detailed investigation of the color evolution of the afterglow light. In our data set no obvious evidence for color changes has been found before, during, or after the smooth break in the light curve approximately 1 day after the burst. In comparison with investigations by others, our data favor the interpretation that the afterglow began to develop into a homogeneous interstellar medium before the break in the light curve became apparent.

Klose, S.↗

Microwave-Spectral Signatures Would Reveal Concealed Objects

A proposed technique for locating concealed objects (especially small antipersonnel land mines) involves the acquisition and processing of spectral signatures over broad microwave frequency bands. This technique was conceived to overcome the weaknesses of older narrow- band electromagnetic techniques like ground-probing radar and low-frequency electromagnetic induction. Ground-probing radar is susceptible to false detections and/or interference caused by rocks, roots, air pockets, soil inhomogeneities, ice, liquid water, and miscellaneous buried objects other than those sought. Moreover, if the radar frequency happens to be one for which the permittivity of a sought object matches the permittivity of the surrounding soil or there is an unfavorable complex-amplitude addition of the radar reflection at the receiver, then the object is not detected. Low-frequency electromagnetic induction works well for detecting metallic objects, but the amounts of metal in plastic mines are often too small to be detectable. The potential advantage of the proposed technique arises from the fact that wideband spectral signatures generally contain more relevant information than do narrow-band signals. Consequently, spectral signatures could be used to make better decisions regarding whether concealed objects are present and whether they are the ones sought. In some cases, spectral signatures could provide information on the depths, sizes, shapes, and compositions of objects. An apparatus to implement the proposed technique (see Figure 1) could be assembled from equipment already in common use. Typically, such an apparatus would include a radio-frequency (RF) transmitter/receiver, a broad-band microwave antenna, and a fast personal computer loaded with appropriate software. In operation, the counter would be turned on, the antenna would be aimed at the ground or other mass suspected to contain a mine or other sought object, and the operating frequency would be swept over the band of interest.

Arndt, G.↗

Submillimeter Follow-Up of WISE-Selected Hyperluminous Galaxies

We have used the Caltech Submillimeter Observatory (CSO) to follow-up a sample of Wide-field Infrared Survey Explorer (WISE) selected, hyperluminous galaxies, the so-called W1W2-dropout galaxies. This is a rare (approx.1000 all-sky) population of galaxies at high redshift (peaks at z = 2-3), which are faint or undetected by WISE at 3.4 and 4.6 microns, yet are clearly detected at 12 and 22 microns. The optical spectra of most of these galaxies show significant active galactic nucleus activity. We observed 14 high-redshift (z > 1.7) W1W2-dropout galaxies with SHARC-II at 350-850 microns, with nine detections, and observed 18 with Bolocam at 1.1 mm, with five detections. Warm Spitzer follow-up of 25 targets at 3.6 and 4.5 microns, as well as optical spectra of 12 targets, are also presented in the paper. Combining WISE data with observations from warm Spitzer and CSO, we constructed their mid-IR to millimeter spectral energy distributions (SEDs). These SEDs have a consistent shape, showing significantly higher mid-IR to submillimeter ratios than other galaxy templates, suggesting a hotter dust temperature.We estimate their dust temperatures to be 60 C120 K using a single-temperature model. Their infrared luminosities are well over 10(exp 13) Stellar Luminosity. These SEDs are not well fitted with existing galaxy templates, suggesting they are a new population with very high luminosity and hot dust. They are likely among the most luminous galaxies in the universe.We argue that they are extreme cases of luminous, hot dust-obscured galaxies (DOGs), possibly representing a short evolutionary phase during galaxy merging and evolution. A better understanding of their long-wavelength properties needs ALMA as well as Herschel data.

Wu, Jingwen↗

Submillimeter Follow-up of Wise-Selected Hyperluminous Galaxies

We have used the Caltech Submillimeter Observatory (CSO) to follow-up a sample of Wide-field Infrared Survey Explorer (WISE) selected, hyperluminous galaxies, the so-called W1W2-dropout galaxies. This is a rare (approximately 1000 all-sky) population of galaxies at high redshift (peaks at zeta = 2-3), which are faint or undetected by WISE at 3.4 and 4.6 micrometers, yet are clearly detected at 12 and 22 micrometers. The optical spectra of most of these galaxies show significant active galactic nucleus activity. We observed 14 high-redshift (zeta greater than 1.7) W1W2-dropout galaxies with SHARC-II at 350-850 micrometers, with nine detections, and observed 18 with Bolocam at 1.1 mm, with five detections. Warm Spitzer follow-up of 25 targets at 3.6 and 4.5 micrometers, as well as optical spectra of 12 targets, are also presented in the paper. Combining WISE data with observations from warm Spitzer and CSO, we constructed their mid-IR to millimeter spectral energy distributions (SEDs). These SEDs have a consistent shape, showing significantly higher mid-IR to submillimeter ratios than other galaxy templates, suggesting a hotter dust temperature.We estimate their dust temperatures to be 60-120 K using a single-temperature model. Their infrared luminosities are well over 10(exp 13) solar luminosity. These SEDs are not well fitted with existing galaxy templates, suggesting they are a new population with very high luminosity and hot dust. They are likely among the most luminous galaxies in the universe.We argue that they are extreme cases of luminous, hot dust-obscured galaxies (DOGs), possibly representing a short evolutionary phase during galaxy merging and evolution. A better understanding of their long-wavelength properties needs ALMA as well as Herschel data.

Wu, Jingwen↗

Variations in the Sea Ice Edge and the Marginal Ice Zone on Different Spatial Scales as Observed from Different Satellite Sensor

The Marginal sea Ice Zone (MIZ) and the sea ice edge are the most dynamic areas of the sea ice cover. Knowledge of the sea ice edge location is vital for routing shipping in the polar regions. The ice edge is the location of recurrent plankton blooms, and is the habitat for a number of animals, including several which are under severe ecological threat. Polar lows are known to preferentially form along the sea ice edge because of induced atmospheric baroclinicity, and the ice edge is also the location of both vertical and horizontal ocean currents driven by thermal and salinity gradients. Finally, sea ice is both a driver and indicator of climate change and monitoring the position of the ice edge accurately over long time periods enables assessment of the impact of global and regional warming near the poles. Several sensors are currently in orbit that can monitor the sea ice edge. These sensors, though, have different spatial resolutions, different limitations, and different repeat frequencies. Satellite passive microwave sensors can monitor the ice edge on a daily or even twice-daily basis, albeit with low spatial resolution - 25 km for the Special Sensor Microwave Imager (SSM/I) or 12.5 km for the Advanced Microwave Scanning Radiometer (AMSR-E). Although special methods exist that allow the detection of the sea ice edge at a quarter of that nominal resolution (PSSM). Visible and infrared data from the Advanced Very High Resolution Radiometer (AVHRR) and from the Moderate Resolution Imaging Spectroradiometer (MODIS) provide daily coverage at 1 km and 250 m, respectively, but the surface observations me limited to cloud-free periods. The Landsat 7 Enhanced Thematic Mapper (ETM+) has a resolution of 15 to 30 m but is limited to cloud-free periods as well, and does not provide daily coverage. Imagery from Synthetic Aperture Radar (SAR) instruments has resolutions of tens of meters to 100 m, and can be used to distinguish open water and sea ice on the basis of surface and volume scattering characteristics. The Canadian RADARSAT C-band SAR provides data that cover the Arctic Ocean and the MIZ every 3 days. A change-point detection approach was utilized to obtain an ice edge estimate from the RADARSAT data The Quickscat scatterometer provides ice edge information with a resolution of a few kilometers on a near-daily basis. During portions of March and April of 2003 a series of aircraft flights were conducted over the ice edge in the Bering Sea carrying the Polarimetric Scanning Radiometer (PSR), which provides spectral coverage identical with the AMSR-E instrument at a resolution of 500 meters. In this study we investigated these different data sets and analyzed differences in their definition of the sea ice edge and the marginal ice zone and how these differences as well as their individual limitations affect the monitoring of the ice edge dynamics. We also examined how the nature of the sea ice edge, including its location, compactness and shape, changes over the seasons. Our approach was based on calculation of distances between ice edges derived from the satellite and aircraft data sets listed above as well as spectral coherence methods and shape parameters such as tortuosity, curvature, and fractional dimension.

Markus, Thorsten↗

The Effects of Normal Metal Stripes on TES Performance

Exploring the effects of size and geometry of normal metal features on the transition shapes and performance of transition-edge sensor microcalorimeters. The spectral resolution of transition-edge sensor (TES) microcalorimeters is very sensitive to the specific dependencies of the resistance R in the superconducting transition on the current I, magnetic field B, and temperature T. In particular, it has been shown that transitions that are very steep in (R,T) space lead to a significant noise term, in excess of conventional expectations. This so-called unexplained noise is known to be reduced by the addition of normal metal stripes across the TES perpendicular to the direction of current flow. These normal metal stripes have been shown to drastically alter the oscillatory patterns seen in measurements of the critical current as a function of magnetic field. However, there are many remaining questions about the exact impact of the stripes on current distributions within the TES, the Fraunhofer pattern and, therefore, the shape of the R(I, B, T) surface. Through measurements of the resistance under DC bias of TES devices of various sizes, with different stripe patterns and dimensions, we will discuss how these stripes can affect the R(I, B, T) surface. In addition, using measurements and analysis of the noise spectra of various devices we will present how these changes to the stripe pattern may affect the performance of the TES. In particular, we will discuss strategies to reduce the presence of localized discontinuities in the derivative of R, associated with increased noise, while maintaining the globally low levels of unexplained noise currently achieved with conventional metal stripe patterns. Implementing these strategies is a path towards producing large arrays with highly uniform transitions and high spectral resolution. These large uniform arrays will be required for future x-ray astronomy applications, such as the X-IFU on ATHENA.

TES↗

Spectral and temporal properties of the black hole candidate systems

Observations of Galactic, and extragalactic black hole candidates show that their spectra can be fitted by the thermal Comptonization spectra in the hard state and two components in the soft state. The first component is a black body shape spectrum and the second component is an extended power law with a spectral index of between 1 and 2. The spectral formation of Comptonized spectra in the presence of thermal and bulk motion is considered. In the soft state, when the disk luminosity is high, the emission region temperature is low. In the limit of low plasma temperature, the theoretical spectrum consists of two components: the soft input photons escaping without significant energy change, and a power law that extends to high energies. The spectral index is in the range between 1 and 2, depending on the mass accretion rate. The extended power law is the result of upscattering of soft disk photons in the bulk flow which takes place in the vicinity of the black hole. In the hard state, the disk luminosity is low, the electron temperature of the emission region is high and the thermal Comptonization is the dominant process in the formation of the resulting spectrum.

Titarchuk, Lev↗

Exploring the Full Range of Properties of Quasar Spectral Distributions

The aim of this work is to support our ISO, far-infrared (IR) observing program of quasars and active galaxies. We have obtained, as far as possible, complete spectral energy distributions (radio-X-ray) of the ISO sample in order to fully delineate the continuum shapes and to allow detailed modelling of that continuum. This includes: ground-based optical, near-IR and mm data, the spectral ranges closest to the ISO data, within 1-2 years of the ISO observations themselves. ISO was launched in Nov 1995 and is currently observing routinely. It has an estimated lifetime is 2 years. All near-IR and optical imaging and spectroscopy are now in hand and in the process of being reduced, mm data collection and proposal writing continues.

Wilkes, B.↗

Silicon vidicon imaging of Jupiter - 4100- to 8300-A absolute reflectivities and limb darkening of spatially resolved regions

Jupiter was observed in six continuum wavelength channels in the region 4100-8300 A, using a silicon vidicon imaging photometer. Spectral reflectivities and high spatial resolution limb-darkening curves for several belts and zones have been extracted from the data. Simple model fits to the data yield information regarding spectral and spatial variations in single-scattering albedos and shape of particle single-scattering phase functions. Belts appear to be more backscattering than zones, particularly in the blue. The data are in moderate agreement with limb-darkening predicted by models derived from the center-to-limb variation in equivalent width of the H2 4-0 S(1) quadrupole line (Cochran, 1976) in the South Tropical Zone, but strongly disagree with the results of such models for the North Equatorial Belt.

Diner, D. J.↗

On the interpretation of gamma-ray burst continua and possible cyclotron absorption lines

It is pointed out that most gamma-ray bursts have spectra that are fit by an optically thin thermal bremsstrahlung shape. The small emitting volume implied by the observation of spectral features identified as cyclotron absorption lines from a 10 to the 12th Gauss field is shown to prevent thermal bremsstrahlung from providing sufficient luminosities to account for the observed fluxes unless the optical depth to Compton scattering is large. It is also demonstrated that complicated detector response functions can introduce artifacts that mimic absorption features below 60 keV unless the absolute gain of the detector is established and correctly applied in analysis. Comparing the continuum as observed by the Berkeley/Los Alamos ISEE-3 gamma-ray detector with the continuum observed by the Konus (Mazets et al. 1981) experiments, a lack of agreement is found, suggesting that the gain of one of these experiments may be incorrect.

Fenimore, E. E.↗

Invertible canopy reflectance modeling of vegetation structure in semiarid woodland

The Li-Strahler canopy reflectance model, driven by Landsat Thematic Mapper (TM) data, provided regional estimates of tree size and density in two bioclimatic zones in West Africa. This model exploits tree geometry in an inversion technique to predict average tree size and density from reflectance data using a few simple parameters measured in the field (spatial pattern, shape, and size distribution of trees) and in the imagery (spectral signatures of scene components). The model was tested in sparse woodland and wooded grassland in the Sahelian and Sudanian bioclimatic zones in West Africa.

Franklin, Janet↗

Environmental loading effects on structures

The environment in which a structure vibrates influences its modal characteristics. Presented herein is experimental modal survey test results on splitter vanes under liquid nitrogen mass-pressure-thermal loading. In particular, shifts in modal frequencies are studied via frequency response functions, power spectral densities, isoplots, quadrature or imaginary plots, and vibration mode shape characteristics generated from strain and acceleration measurements. Analyses have shown that while mass loading lowers the frequencies, increased pressure and lower temperature have opposite effect. Thus, pressurization and cooling of a liquid causes the modal frequencies of the structure in which it is contained to shift upward.

Panossian, H. V.↗

The unusual cometary star-forming region G110-13

We present far-IR, radio continuum, and spectral line observations of an unusual, highly elongated, comet-shaped molecular cloud, located about 100 pc from the Galactic plane. The presence of three late B-type stars embedded within, or adjacent to, this low-mass cloud implies a star-forming efficiency that may be as high as 30 percent. Several mechanisms that may have been responsible for its unusual morphology and high star-forming efficiency will be described and evaluated. Although ram-pressure resulting from the rapid motion of this cloud through the interstellar medium could explain its streamlined appearance, there is evidence that G110-13 is the compression front formed by a recent cloud collision.

Odenwald, Sten↗