Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Specific impulse”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Operation of the J-series thruster using inert gas

Electron bombardment ion thrusters using inert gases are candidates for large space systems. The J-Series 30 cm diameter thruster, designed for operation up to 3 k-W with mercury, is at a state of technology readiness. The characteristics of operation with xenon, krypton, and argon propellants in a J-Series thruster with that obtained with mercury are compared. The performance of the discharge chamber, ion optics, and neutralizer and the overall efficiency as functions of input power and specific impulse and thruster lifetime were evaluated. As expected, the discharge chamber performance with inert gases decreased with decreasing atomic mass. Aspects of the J-Series thruster design which would require modification to provide operation at high power with insert gases were identified.

Rawlin, V. K.↗
NASA NTRS1982

LOX/hydrocarbon auxiliary propulsion system study

Liquid oxygen (LOX)/hydrocarbon propulsion concepts for a "second generation' orbiter auxiliary propulsion system was evaluated. The most attractive fuel and system design approach identified, and the technology advancements that are needed to provide high confidence for a subsequent system development were determined. The fuel candidates were ethanol, methane, propane, and ammonia. Even though ammonia is not a hydrocarbon, it was included for evaluation because it is clean burning and has a good technology base. The major system design options were pump versus pressure feed, cryogenic versus ambient temperature RCS propellant feed, and the degree of OMS-RCS integration. Ethanol was determined to be the best fuel candidate. It is an earth-storable fuel with a vapor pressure slightly higher than monomethyl hydrazine. A pump-fed OMS was recommended because of its high specific impulse, enabling greater velocity change and greater payload capability than a pressure fed system.

Orton, G. F.↗
NASA NTRS1983

Evaluation of the use of on-board spacecraft energy storage for electric propulsion missions

On-board spacecraft energy storage represents an under utilized resource for some types of missions that also benefit from using relatively high specific impulse capability of electric propulsion. This resource can provide an appreciable fraction of the power required for operating the electric propulsion subsystem in some missions. The most probable mission requirement for utilization of this energy is that of geostationary satellites which have secondary batteries for operating at high power levels during eclipse. The study summarized in this report selected four examples of missions that could benefit from use of electric propulsion and on-board energy storage. Engineering analyses were performed to evaluate the mass saved and economic benefit expected when electric propulsion and on-board batteries perform some propulsion maneuvers that would conventionally be provided by chemical propulsion. For a given payload mass in geosynchronous orbit, use of electric propulsion in this manner typically provides a 10% reduction in spacecraft mass.

Poeschel, R. L.↗
NASA NTRS1982

Electric thruster research

It has been customary to assume that ions flow nearly equally in all directions from the ion production region within an electron-bombardment discharge chamber. In general, the electron current through a magnetic field can alter the electron density, and hence the ion density, in such a way that ions tend to be directed away from the region bounded by the magnetic field. When this mechanism is understood, it becomes evident that many past discharge chamber designs have operated with a preferentially directed flow of ions. Thermal losses were calculated for an oxide-free hollow cathode. At low electron emissions, the total of the radiation and conduction losses agreed with the total discharge power. At higher emissions, though, the plasma collisions external to the cathode constituted an increasingly greater fraction of the discharge power. Experimental performance of a Hall-current thruster was adversely affected by nonuniformities in the magnetic field, produced by the cathode heating current. The technology of closed-drift thrusters was reviewed. The experimental electron diffusion in the acceleration channel was found to be within about a factor of 3 of the Bohm value for the better thruster designs at most operating conditions. Thruster efficiencies of about 0.5 appear practical for the 1000 to 2000 s range of specific impulse. Lifetime information is limited, but values of several thousands of hours should be possible with anode layer thrusters operated or = to 2000 s.

Kaufman, H. R.↗
NASA NTRS1983

Electrothermal thruster diagnostics. Volume 1: Executive summary

A flight-qualified electrothermal thruster demonstrated its adaptability to a variety of propellants. Originally qualified for operation with hydrazine propellant, it was operated with nitrogen, hydrogen, and ammonia propellants, demonstrating 73, 61, and 52 percent overall efficiency with these propellants, respectively, when tested over a wide range of operating conditions. By introducing a preheater to admit hot, rather than cold, propellant inlet gases to the thruster's augmentation heat exchanger, delivered specific impulse closer to theoretical performance limits should be achieved.

Zafran, S.↗
NASA NTRS1983

Advanced LOX/H sub 2 engine technologies for future OTVs

The optimization methods and trade studies which were used to define a 1980 state-of-the-art design of orbital transfer vehicles are summarized. The advanced thrust chamber, turbomachinery, and engine power cycle technologies recommended for development and verification during the 1980's are discussed. The state-of-the-art design serves as one of the reference points for evaluation of the advanced technology concepts. A second reference point is provided by the 1960 state-of-the-art RL-10 engine. Advanced heat energy extraction concepts in the combustor and injector are presented that will permit the high chamber pressures expected of the advanced expander cycle engine concept. Advanced turbomachinery concepts are selected that will help utilize efficiently the heat energy extracted in the thrust chamber and aid in uprating chamber pressures to values five times those realized with 1960 to 1980 technologies. The higher chamber pressure benefits are maximized with nozzle concepts that will package within a short retracted length and extend to the very high expansion area ratios required for specific impulse values significantly higher than those now realized by operational systems. Control system component concepts studied will allow utilization of the high turbine drive energy levels in a reliable repeatable manner that will reduce program risk and enhance overall space transportation system mission life cycle cost.

Glass, J.↗
NASA NTRS1982

Magnetoplasmadynamic thruster development

Current research on self-field MPD thrusters presents the possibility of developing high power/low cost electric propulsion. The interest generated in this propulsion concept within both NASA and the U.S. Air Force has led to a coordinated interagency effort, and the recent completion of several test sites are expected to speed thruster concept development. Efficiencies approaching 40% at 2200 sec have been experimentally demonstrated. Among the characteristics recommending development of MPD thrusters are high thrust density and power handling capability, simplicity, and a wide dynamic range of thrust and specific impulse. MPD thrusters can, moreover, operate either continuously, at high available power levels, or in a pulsed mode, to match lower power levels.

Pawlik, E. V.↗
NASA NTRS1983

A reexamination of the laser supported combustion wave

Kantrowitz (1972) and Minovitch (1972) have proposed the use of laser sustained plasmas as a means to heat a rocket propellant. Recent studies of laser-powered propulsion have been directed toward the application of high-specific-impulse space propulsion systems for orbital transfer missions. Analyses of rocket performance relied heavily on the concept of the laser-supported combustion (LSC) wave. Raizer (1971) first drew the analogy between laser-sustained plasmas and combustion waves in an analysis. The Raizer model was later applied to hydrogen by Kemp and Root (1979). In connection with certain problems arising with the approach considered by Kemp and Root, the present investigation is concerned with a reexamination of the Raizer model. Attention is given to a numerical approach for the entire LSC wave in hydrogen, taking into account the incorporation of the proper boundary conditions far downstream of the wave.

Keefer, D.↗
NASA NTRS1983

Effects of tripropellant engines on earth-to-orbit vehicles

The effects of tripropellant engines on earth-to-orbit vehicles is examined in terms of their impact on engine configurations and launch capabilities. Hydrocarbon fuel with some oxygen is used in tripropellant fuels, with hydrogen as a back-up fluid for coolant and driving the pumps. Engine concepts which implement tripropellant fuels include a hydrogen-gas generator engine with staged combustion, a two-mode engine burning hydrocarbon fuel in one chamber and hydrogen in another, a dual expander engine with a central hydrocarbon nozzle and an annular hydrogen nozzle, and a dual throat engine. The use of hydrocarbons reduces the fuel weight by providing a higher specific impulse than with LOX-LH2 systems alone. Studies have shown that single-stage-to-orbit vehicles capable of lifting 13.6 Mg are possible with tripropellant engines. A dual-expander engine, is identified as offering the most fuel dry mass reduction for a given payload if cooling requirements can be satisfied. Further development of the tripropellant engines is concluded to be beneficial.

Martin, J. A.↗
NASA NTRS1983

A parametric study of thermally augmented O2/H2 rocket enines

An analysis is presented of the performance of a conceptual propulsion system in which liquid hydrogen and liquid oxygen are first vaporized and heated by thermal power from a spacecraft nuclear electric power supply prior to combustion in a rocket engine. Calculations of the specific impulse (I-sp) are presented for a series of O2/H2 oxidizer-to-fuel mixture ratios and reactant pre-heat temperatures (T-aug). It is found that the ratio of the augmentation power to the total engine jet power (P-aug/P-tot) determines the engine thrust for a given P-aug, T-aug, and I-sp. In addition, the performance of an unaugmented O2/H2 and a heated-hydrogen rocket engine were also calculated for the same conditions. Results show that an augmented O2/H2 engine has three to eight times the thrust of a heated H2 engine for a given P-aug. It is concluded that it should be possible to design a high/low thrust propulsion system using a common propellant, with the option of using thermal power from the nuclear electric power supply to augment the low-thrust propulsion system during cruise periods when the reactor's full electric power is not needed.

Frisbee, R. H.↗
NASA NTRS1983

Experimental Investigation of a Hall-Current Accelerator

The Hall-current accelerator is being investigated for use in the 1000-2000 sec. range of specific impulse. Three models of this thruster were tested. The first two models had three permanent magnets to supply the magnetic field and the third model had six magnets to supply the field. The third model thus had approximately twice the magnetic field of the first two. The first and second models differ only in the shape of the magnetic field. All other factors remained the same for the three models except for the anode-cathode distance, which was changed to allow for the three thrusters to have the same magnetic field integral between the anode and the cathode. These Hall thrusters were tested to determine the plasma properties, the beam characteristics, and the thruster characteristics. The thruster operated in three modes: (1) main cathode only, (2) main cathode with neutralizer cathode, and (3) neutralizer cathode only. The plasma properties were measured along an axial line, 1 mm inside the cathode radius, at a distance of 0.2 to 6.2 cm from the anode. Results show that the current used to heat the cathode produced nonuniformities in the magnetic field, hence also in the plasma properties. In a Hall thruster this general design appears to provide the most thrust when operated at a magnetic field less than the maximum value studied.

Plank, G. M.↗
NASA NTRS1984

Low loss injector for Space Shuttle main engine. Center director's discretionary fund

An efficient propellant injection method to raise the Space Shuttle Main Engine (SSME) thrust and payload is discussed. Relatively large diameter injector elements with low pressure loss are recommended for the main combustion chamber and the pre-burners. Smaller losses admit more propellant flow which then raises thrust. Payload is not only gained by specific impulse but also by thrust. The chamber pressure is stabilized by selecting the proper cavity size for the injector elements while reducing the injection pressure loss which normally is kept high for stability. The rather large injector element recesses provide acoustic damping which makes baffles and acoustic absorbers unnecessary. A tenfold reduction of flow induced stresses which are rather high in the present design is shown. Relaxed tolerances, fewer elements, and better maintenance are offered. The study was conducted under a center director discretionary fund assignment.

Vonpragenau, G. L.↗
NASA NTRS1984

Performance capabilities of the 12-centimeter Xenon ion thruster

The 8- and 12-cm mercury ion thruster systems were developed primarily to provide N-S station keeping of satellites with masses up to about 1800 to 3600 kg respectively. The on-orbit propulsion requirements of recently proposed Large Space Systems (LSS) are beyond the thrust capabilities of the baseline 8- and 12-cm thruster systems. This paper presents a characterization of the performance capabilities of the 12-cm Xenon ion thruster to enable an evaluation of its application to LSS auxiliary propulsion requirements. With minor thruster modifications and simplifications the thrust was increased to 64 mN, a factor of six over the baseline 12-cm mercury thruster performance. The thruster was operated over a range of specific impulse of about 2000 to 4000 seconds and at total efficiencies up to 68.0 percent. The operating levels reached in this study were found to be close to the operating limits of the thruster design in terms of perveance, grid breakdown voltage and thruster component temperatures such as those of the magnets and cathode baffle.

Mantenieks, M.↗
NASA NTRS1984

Laser thermal propulsion

Laser thermal propulsion (LTP) is studied for the case in which laser power is absorbed by a small very high-temperature plasma (about 20,000 K) and transferred to the remainder of the pure hydrogen propellant by radiation and mixing. This concept could lead to the realization of a lightweight orbital transfer vehicle propulsion system having a specific impulse in the range 1000-2000 s. Approximately 12 percent of the input power may be radiated to the thruster walls, and 15 percent of the total propellant flow must be heated to 20,000 K to provide a bulk temperature of 5000 K prior to expansion. Three principal research issues identified are: (1) conditions for hydrogen plasma ignition, (2) control of the plasma position within the laser beam, plasma stability, and plasma absorption efficiency, and (3) characterization of the mixing of the plasma and buffer flows.

Keefer, D.↗
NASA NTRS1984

Deflagration plasma thruster

This paper introduces the application of the magnetized plasma deflagration process to space propulsion. The deflagration process has the unique capability of efficiently converting input energy into kinetic energy in the accelerating direction. To illustrate the totally divergent characters of 'snowplow' detonation and deflagration discharges, examples of the differences between deflagration and detonation 'snowplow' discharges are expressed in terms of current densities, temperature, and particle velocities. Magnetic field profiles of the deflagration mode of discharges are measured. Typical attainable plasma characteristics are described in terms of velocity, electron temperature, and density, as well as measurement techniques. Specific impulses measured by piezo-electric probe and pendulum methods are presented. The influence of the transmission line in the discharge circuits on plasma velocity is measured by means of a microwave time-of-flight method. The results for the deflagration thruster are compared with other space thrusters. Further research areas are identified.

Cheng, D. Y.↗
NASA NTRS1984

Demonstration of a new electrothermal thruster concept

The design and test of a microwave electrothermal thruster are described. The device, which employs a coaxial microwave discharge, was tested in nitrogen gas with 200-600 W of 2.45-GHz input power. Experimental measurements of thrust, specific impulse, and energy efficiency are presented for different flow and discharge pressures. Measured energy efficiencies varied between 30-60 percent and the performance compared favorably with other electrothermal thrusters operating in nitrogen gas. The experimental performance demonstrated the feasibility of the concept.

Whitehair, S.↗
NASA NTRS1984

Laser propulsion

An introduction to thermal laser propulsion is presented. This form of rocket propulsion uses a laser beam from a remotely-located laser to heat a propellant gas, which is then expanded in a conventional way to produce thrust. This propulsion scheme has the potential for producing high specific impulse (greater than 1000 s) at moderate to high thrust (1000 lbs). Laser propulsion can thus fill a niche in propulsion for spaceflight missions which can be filled by no other practical scheme. The system analyses and some of the experimental and theoretical studies which have been performed are briefly reviewed. Production of thrust by a pulsed laser has been demonstrated on a laboratory scale at an Isp of 1000 s in hydrogen. While more work is needed, it seems apparent that laser propulsion has an important and unique capability which should be pursued, and should be considered for space missions in the 1990's and beyond.

Kemp, N. H.↗
NASA NTRS1982

Future capabilities of the Delta launch vehicle

Design features and payload delivery capabilities of the Delta 3920 launch vehicle are presented. The 3920 is the 14th iteration in a series that was first launched in 1960 and has in recent years surpassed a 97 percent success rate. Capacity is 2800 lb to GEO. The second stage has a propellant capacity of 13,244 lb and a specific impulse of 319.2 sec and produces 9443 lb thrust. The first mission is the Landsat-D satellite and 27 more launches are scheduled through 1985, some associated with different upper stage configurations. The 3924 configuration delivers payload to GEO at a cost of $7500/lb. A fairing has been designed to provide back-up for Shuttle payloads, although the larger size reduces the GEO payload to 2715 lb. Performance enhancements may, however, be gained through pneumatic thrusters for the Castor IV engine separation, higher Castor IV thrust levels, increased booster thrust, and a cryogenic second stage.

Grimes, D. W.↗