Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Source and propagation modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Short-range thermal magnon diffusion in magnetic garnet

Here, using the spin Seebeck effect (SSE), we study the propagation distance of thermally induced spin currents inside a magnetic insulator thin film in the short-range regime. We disambiguate spin currents driven by temperature and chemical potential gradients by comparing the SSE signal before and after adding a heat-sinking capping layer on the same device. We report that the measured spin decay behavior near the heat source is well accounted for by a diffusion model where the magnon diffusion length is in submicron range, in other words, two orders of magnitude smaller than previous estimates inferred from the long-range behavior. Our results highlight the caveat in applying a diffusive theory to describe thermally generated magnon transport, where a single decay length may not capture the behavior on all length scales.

36 MATERIALS SCIENCE↗
DOE OSTI2023

New constraints on sodium production in globular clusters from the Na 23 ( He 3 , d ) Mg 24 reaction

The star-to-star anticorrelation of sodium and oxygen is a defining feature of globular clusters, but, to date, the astrophysical site responsible for this unique chemical signature remains unknown. Sodium enrichment within these clusters depends sensitively on reaction rate of the sodium destroying reactions 23 Na(p, γ) and 23 Na(p,α). In this paper, we report the results of a 23 Na( 3 He,d) 24 Mg transfer reaction carried out at Triangle Universities Nuclear Laboratory using a 21 MeV 3 He beam. Astrophysically relevant states in 24 Mg between 11 < E x < 12 MeV were studied using high-resolution magnetic spectroscopy, thereby allowing the extraction of excitation energies and spectroscopic factors. Bayesian methods are combined with the distorted wave Born approximation to assign statistically meaningful uncertainties to the extracted spectroscopic factors. For the first time, these uncertainties are propagated through to the estimation of proton partial widths. Our experimental data are used to calculate the reaction rate. The impact of the new rates are investigated using asymptotic giant branch star models. Furthermore, it is found that while the astrophysical conditions still dominate the total uncertainty, intramodel variations on sodium production from the 23 Na(p, γ) and 23 Na(p,α) reaction channels are a lingering source of uncertainty.

20 ≤ A ≤ 38↗
NASA NTRS1977

Momentum and energy transport by waves in the solar atmosphere and solar wind

The fluid equations for the solar wind are presented in a form which includes the momentum and energy flux of waves in a general and consistent way. The concept of conservation of wave action is introduced and is used to derive expressions for the wave energy density as a function of heliocentric distance. The explicit form of the terms due to waves in both the momentum and energy equations are given for radially propagating acoustic, Alfven, and fast mode waves. The effect of waves as a source of momentum is explored by examining the critical points of the momentum equation for isothermal spherically symmetric flow. We find that the principal effect of waves on the solutions is to bring the critical point closer to the sun's surface and to increase the Mach number at the critical point. When a simple model of dissipation is included for acoustic waves, in some cases there are multiple critical points.

Jacques, S. A.↗
NASA NTRS1982

Collaborative research in tunneling and field emission pumped surface wave local oscillators and amplifiers for infrared and submillimeter wavelengths under director's discretionary fund

Progress is reported in work towards the development of surface wave sources for the infrared and sub-millimeter portion of the spectrum to be based upon electron pumping by tunneling electrons in metal-barrier-metal or metal-barrier-semiconductor devices. Tunneling phenomena and the coupling of radiation to tunnel junctions were studied. The propagation characteristics of surface electro-magnetic modes in metal-insulator-p(++) semiconductor structures as a function of frequency were calculated. A model for the gain process based upon Tucker's formalism was developed and used to estimate what low frequency gain might be expected from such structures. The question of gain was addressed from a more fundamental viewpoint using the method of Lasher and Stern.

Gustafson, T. K.↗
NASA NTRS1983

The oblique whistler instability in the earth's foreshock

The linear Vlasov stability properties of electron velocity distributions, similar to those observed in the upstream foreshock region in association with obliquely propagating whistler waves at approximately 1 Hz, are studied. These distributions are modeled by a sum of bi-Maxwellians with drift speeds parallel to the magnetic field B. Such distributions are found to be stable to modes with wavevectors k parallel to B but unstable to whistler waves propagating obliquely to the magnetic field. The frequencies and wavelengths of these unstable modes agree well with those of whistlers observed upstream of the earth's bow shock. The free energy source driving the instability is a region of positive parallel slope at large pitch angles (about 85 deg) and intermediate energies (about 20 eV), probably corresponding to solar wind electrons magnetostatically reflected from the magnetic ramp of the bow shock. The whistlers grow via electromagnetic Landau resonance with this free energy source.

Sentman, D. D.↗
NASA NTRS1988

Model-scale sound propagation experiment

The results of a scale model propagation experiment to investigate grazing propagation above a finite impedance boundary are reported. In the experiment, a 20 x 25 ft ground plane was installed in an anechoic chamber. Propagation tests were performed over the plywood surface of the ground plane and with the ground plane covered with felt, styrofoam, and fiberboard. Tests were performed with discrete tones in the frequency range of 10 to 15 kHz. The acoustic source and microphones varied in height above the test surface from flush to 6 in. Microphones were located in a linear array up to 18 ft from the source. A preliminary experiment using the same ground plane, but only testing the plywood and felt surfaces was performed. The results of this first experiment were encouraging, but data variability and repeatability were poor, particularly, for the felt surface, making comparisons with theoretical predictions difficult. In the main experiment the sound source, microphones, microphone positioning, data acquisition, quality of the anechoic chamber, and environmental control of the anechoic chamber were improved. High-quality, repeatable acoustic data were measured in the main experiment for all four test surfaces. Comparisons with predictions are good, but limited by uncertainties of the impedance values of the test surfaces.

Willshire, William L., Jr.↗
NASA NTRS1994

Excitation of high-frequency electromagnetic waves by energetic electrons with a loss cone distribution in a field-aligned potential drop

The electron cyclotron maser instability (CMI) driven by momentum space anisotropy (df/dp (sub perpendicular) greater than 0) has been invoked to explain many aspects, such as the modes of propagation, harmonic emissions, and the source characteristics of the auroral kilometric radiation (AKR). Recent satellite observations of AKR sources indicate that the source regions are often imbedded within the auroral acceleration region characterized by the presence of a field-aligned potential drop. In this paper we investigate the excitation of the fundamental extraordinary mode radiation due to the accelerated electrons. The momentum space distribution of these energetic electrons is modeled by a realistic upward loss cone as modified by the presence of a parallel potential drop below the observation point. On the basis of linear growth rate calculations we present the emission characteristics, such as the frequency spectrum and the emission angular distribution as functions of the plasma parameters. We will discuss the implication of our results on the generation of the AKR from the edges of the auroral density cavities.

Fung, Shing F.↗
NASA NTRS2023

Extended Kalman Filter Performance on the Artemis-1 Mission

The Artemis Program is NASA’s campaign to explore the Moon and beyond. Artemis-1, the uncrewed exoLEO test flight of the Orion spacecraft, was completed in 2022. There were four navigation Extended Kalman Filters (EKFs) that are part of the Orion navigation system. The Atmospheric Extended Kalman Filter (ATMEKF) estimates the vehicle position, velocity, and attitude (referred to as the vehicle state) during the ascent and entry phases of flight. Once Orion is outside of Earths atmosphere, the Earth Orbit Extended Kalman Filter (EOEKF) and CisLunar Extended Kalman Filter (CLEKF) estimate the translational states, depending on the phase of flight, while the Attitude Extended Kalman Filter (ATTEKF) estimates the rotational state of the vehicle. The Kalman filters propagate the vehicle state forward in time using a combination of dynamics models and the output data from the Inertial Measurement Unit (IMU). The filters update the vehicle states and associated uncertainties, in the form of the covariance matrix, using pseudorange measurements from GPS (in ATMEKF/EOEKF), optical navigation measurements of the Earth or Moon (in CLEKF), and star tracker measurements (in ATTEKF). Simultaneously, the Kalman filters estimate error sources in the sensors, which are included in the state vectors as Exponentially Correlated Random Variables (ECRVs). This paper will summarize the performance of these filters during the Artemis-1 mission.

Artemis-1↗
NASA NTRS1987

Sound propagation over uneven ground and irregular topography

The acoustic impedance of the surface coverings used in the laboratory experiments on sound diffraction by topographical ridges was determined. The model, which was developed, takes into account full wave effects and the possibility of surface waves and predicts the sound pressure level at the receiver location relative to what would be expected if the flat surface were not present. The sound pressure level can be regarded as a function of frequency, sound speed in air, heights of source and receiver, and horizontal distance from source to receiver, as well as the real and imaginary parts of the surface impedance.

Berthelot, Yves H.↗
NASA NTRS1993

Rotating rake design for unique measurement of fan-generated spinning acoustic modes

In light of the current emphasis on noise reduction in subsonic aircraft design, NASA has been actively studying the source of and propagation of noise generated by subsonic fan engines. NASA/LeRC has developed and tested a unique method of accurately measuring these spinning acoustic modes generated by an experimental fan. This mode measuring method is based on the use of a rotating microphone rake. Testing was conducted in the 9 x 15 Low-speed Wind Tunnel. The rotating rake was tested with the Advanced Ducted Propeller (ADP) model. This memorandum discusses the design and performance of the motor/drive system for the fan-synchronized rotating acoustic rake. This novel motor/drive design approach is now being adapted for additional acoustic mode studies in new test rigs as baseline data for the future design of active noise control for subsonic fan engines. Included in this memorandum are the research requirements, motor/drive specifications, test performance results, and a description of the controls and software involved.

Konno, Kevin E.↗
NASA NTRS2011

5 Percent Ares I Scale Model Acoustic Test: Overpressure Characterization and Analysis

During the ignition of a ducted solid rocket motor (SRM), rapid expansion of injected hot gases from the motor into a confined volume causes the development of a steep fronted wave. This low frequency transient wave propagates outward from the exhaust duct, impinging the vehicle and ground structures. An unsuppressed overpressure wave can potentially cause modal excitation in the structures and vehicle, subsequently leading to damage. This presentation details the ignition transient f indings from the 5% Ares I Scale Model Acoustic Test (ASMAT). The primary events of the ignition transient environment induced by the SRM are the ignition overpressure (IOP), duct overpressure (DOP), and source overpressure (SOP). The resulting observations include successful knockdown of the IOP environment through use of a Space Shuttle derived IOP suppression system, a potential load applied to the vehicle stemming from instantaneous asymmetrical IOP and DOP wave impingement, and launch complex geometric influences on the environment. The results are scaled to a full-scale Ares I equivalent and compared with heritage data including Ares I-X and both suppressed and unsuppressed Space Shuttle IOP environments.

Alvord, David↗
DOE OSTI2024

Modeling Partial Reflection Paths for Infrasound Analysis

Numerical methods enabling simulation of scattered and partially reflected infrasonic propagation paths produced by interaction with fine-scale structure in the middle atmosphere have been implemented in the infraGA ray tracing software. This capability enables simulation of ensonification in the classical stratospheric “shadow zone” that has been observed during the Humming Roadrunner and LSECE surface explosion campaigns as well as in other data sets. In the case of LSECE, a pair of stations roughly 140 kilometers east of the source location observed arrivals with celerities (horizontal group velocities) slightly slower than observed stratospheric paths at similar azimuths. The arrivals exhibited increasing trace velocity later in the wavetrain indicating a steepening of the arrival path for longer or slower propagation paths. Simulation of partially reflected paths using the updated infraGA software methods finds good agreement between observed and predicted infrasonic ensonification at these locations within the stratospheric shadow zone. Further development of the partial reflection physics and comparison with other data sets is needed to more robustly understand how such anomalous infrasonic signals can be predicted; however, the demonstration of this capability is a promising first step in such analyses.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Hermes-3: Multi-component plasma simulations with BOUT++

A new open source tool for fluid simulation of multi-component plasmas is presented, based on a flexible software design that is applicable to scientific simulations in a wide range of fields. Hermes-3 is built on plasma simulation framework BOUT++, consolidating earlier SD1D and Hermes models into a single code that can be configured at run-time to solve plasma models in 1D, 2D or 3D, either for transport (steady-state) or turbulent (time-evolving) problems, with an arbitrary number of ion and neutral species. Here, we describe the improved numerical algorithms and software design that have been implemented in Hermes-3. To demonstrate the capabilities of this tool, applications relevant to the boundary of tokamak plasmas are presented: 1D simulations of diveror plasmas evolving equations for all charge states of neon and deuterium; 2D transport simulations of tokamak equilibria in single-null X-point geometry with plasma ion and neutral atom species; and simulations of the time-dependent propagation of plasma filaments (blobs). Hermes-3 is publicly available on Github under the GPL-3 open source license. The repository includes documentation and a suite of unit, integrated and convergence tests.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1989

Standing hydromagnetic waves in the Io plasma torus - Voyager 1 observations

An attempt to analyze Voyager 1 magnetic field data for the existence of any ultralow-frequency hydromagnetic waves in the Io plasma torus is presented. The coincidence between the increase in wave activity and the entry into the Io plasma torus is in support of treating the torus as a low Alfven velocity region and thus as a hydromagnetic waveguide. A first theoretical treatment of hydromagnetic wave propagation within the torus suggests that decoupling of toroidal and poloidal type oscillations can occur under the condition of axisymmetry of the wave field. Numerical calculations of the fundamental mode toroidal and first harmonic poloidal eigenperiods for a model Jovian magnetosphere give values quite in agreement with the observed periods. Observations of nearly axisymmetric, decoupled toroidal and poloidal mode eigenoscillations of the Io plasma torus suggest a large-scale source mechanism for the detected magnetic field fluctuations.

Glassmeier, K.-H.↗
NASA NTRS1992

Heating of solar and stellar chromospheres and coronae by MHD waves

The two general classes of models that deal with the required heating of stellar chromospheres and coronae assume that outer stellar atmospheres are heated by hydrodynamic or by magnetohydrodynamic (MHD) waves and that these waves are generated by turbulent motions in the stellar convection zones. This paper considers the types of MHD waves and the source of these waves in stars like sun, the efficiency of the generation of MHD waves, and the manner of propagation and energy dissipation of MHD waves. It is shown that the basic criteria for the validity of any theory of MHD wave heating must account for the mean level of heating observed in stellar chromospheres and coronae, and for the range of radiative losses observed for a given spectral type. It is also required that the MHD wave heating theory accounts for the existence of inhomogeneities in stellar atmospheres. The results obtained indicate that magnetic tube waves might supply enough energy for the chromospheric and coronal heating and might also account for the observed range of variations of stellar radiative losses for a given spectral type.

Musielak, Z. E.↗
NASA NTRS1994

Another clue about particle acceleration in impulsive hard X-ray/microwave bursts

In a sample of impulsive bursts with rise times less than 30 s, a correlation between burst rise times and the frequency of maximum microwave emission has been found. The immplications for source structure and dynamics are discussed. Previously evidence was found that such bursts are caused by some propagating disturbance such as a shock wave or thermal conduction front. Combining that evidence with the microwave and hard X-ray spectral information suggests that the most rapid bursts are emitted from the most compact and intensely magnetized sources. The most rapid bursts also exhibited the hardest X-ray spectra, as published previously. These facts are important clues to understanding the physical process responsible for impulsive bursts. A model for the bursts is suggested, based on the observations and inferences described.

Batchelor, David↗
NASA NTRS2012

A Statistics-Based Material Property Analysis to Support TPS Characterization

Accurate characterization of entry capsule heat shield material properties is a critical component in modeling and simulating Thermal Protection System (TPS) response in a prescribed aerothermal environment. The thermal decomposition of the TPS material during the pyrolysis and charring processes is poorly characterized and typically results in large uncertainties in material properties as inputs for ablation models. These material property uncertainties contribute to large design margins on flight systems and cloud re- construction efforts for data collected during flight and ground testing, making revision to existing models for entry systems more challenging. The analysis presented in this work quantifies how material property uncertainties propagate through an ablation model and guides an experimental test regimen aimed at reducing these uncertainties and characterizing the dependencies between properties in the virgin and charred states for a Phenolic Impregnated Carbon Ablator (PICA) based TPS. A sensitivity analysis identifies how the high-fidelity model behaves in the expected flight environment, while a Monte Carlo based uncertainty propagation strategy is used to quantify the expected spread in the in-depth temperature response of the TPS. An examination of how perturbations to the input probability density functions affect output temperature statistics is accomplished using a Kriging response surface of the high-fidelity model. Simulations are based on capsule configuration and aerothermal environments expected during the Mars Science Laboratory (MSL) entry sequence. We identify and rank primary sources of uncertainty from material properties in a flight-relevant environment, show the dependence on spatial orientation and in-depth location on those uncertainty contributors, and quantify how sensitive the expected results are.

Copeland, Sean R.↗
DOE OSTI2021

Evaluating Probability of Containment Effectiveness at a GCS Sites using integrated assessment modeling approach with Bayesian decision Networks

Improved scientific and engineering understanding of the behavior of geologic CO2 storage together with established regulatory framework and incentive structures raise the prospects for accelerated, large-scale deployment of this greenhouse gas emissions reduction approach. Incentive structures call for the establishment of appropriate verification and accounting approaches to support claims of the integrity of a geologic storage complex and to justify taking credit for long-term storage. In this study, we present a framework for assessing the probability of containment effectiveness over the lifetime of a geologic carbon storage site (e.g., after 70 years of injection and post-injection site performance) using forward stochastic model realizations based on site characterization data and using a monitoring-informed Bayesian network based on hypothetical detectability from surface seismic surveys over the site injection and post-injection phases. The National Risk Assessment Partnership’s open-source Integrated Assessment Model (NRAP-Open-IAM) was utilized to develop an ensemble of 10,000 a priori stochastic forecasts of CO2 containment. Those simulations were used to train the Bayesian network model to estimate the prior probabilities of the CO2 leakage mass into overlying, monitorable aquifers considering the uncertainties in the reservoir properties, permeability of potentially leaky wells and the overlying aquifers. The conditional probabilities in the Bayesian network were either learned from the NRAP-Open-IAM simulations or derived from the predefined detection thresholds for the monitoring method. Observations obtained from monitoring, over time during the site operation phases were then used to generate updated posterior probabilities of containment (and any loss from containment) in the Bayesian network by propagating the prior probabilities through the conditional probabilities. We demonstrate how to construct and use the Bayesian network for verifying the long-term storage complex effectiveness informed by monitoring based on the NRAP-Open-IAM simulations previously developed for the FutureGen 2.0 site. This approach may have relevance for stake holders to demonstrate secure geologic storage, provide a defensible, probabilistic approach to claim credit for geologic storage, and to estimate the likelihood that any fraction of the claimed credit may need to be refunded to the creditor based on available monitoring information.

Bayesian network, Risk assessment, Monitoring, car↗