SEARCH · Engineering Papers

Results for “Shell effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

All sources NASA NTRS DOE OSTI

DOE OSTI2022

Pairwise Multiparticle States and the Monopole Unitarity Puzzle

We suggest a novel resolution for a decades old mystery-what happens when a positron scatters off a minimal grand-unification-theory monopole in an s wave, a puzzle first discussed by Callan in 1983. Using the language of on shell amplitudes and pairwise helicity we suggest that the final state contains two up quarks and a down quark in an entangled "pairwise" multiparticle state-the only particle final state that satisfies angular momentum and gauge charge conservation. The cross section for this process is as large as in the original Rubakov-Callan effect, only suppressed by the QCD scale. The final state we find cannot be seen in Callan's truncated 2D theory, since our new pairwise state appears only in more than two dimensions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2020

Quantifying the Effect of Magnetic Field Line Curvature Scattering on the Loss of Ring Current Ions

During geomagnetic storms, the ring current ions sometimes exhibit rapid loss as suggested by the fast recovery of the Dst index on a time scale of a few hours. Here, the effects of magnetic field line curvature (FLC) scattering on the loss of ring current ions, which have not been well quantified, are studied here by test particle simulations under the T89c magnetic field model. Our simulation results show that the prediction of ion loss based on a single–value cutoff of the κ parameter or maximum of δμ/μ of a single FLC scattering is not accurate. Instead, the e–folding lifetime (τ) for the loss of ring current ions due to cumulative FLC scattering has been calculated for different initial ion energies, equatorial pitch angles, and L shells under different geomagnetic conditions. The results show that in general the FLC scattering loss is faster for ions of higher energy, higher mass, smaller pitch angle, higher L, and at high Kp level. Specifically, we find that at Kp = 6 the lifetime can be <10 h at L > 5 for 100 s keV protons and at L > 4 for 100 s keV O + , which demonstrates that FLC scattering can be an important mechanism for the observed fast loss (τ < 10 h) of ring current ions during geomagnetic storms. Furthermore, we formulate an empirical formula for τ as a function of ion energy, pitch angle, position, species, and Kp. The empirical formula can be directly included in ring current models to account for the FLC scattering effects.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2021

Promoting electrochemical reduction of CO 2 to ethanol by B/N-doped sp 3 /sp 2 nanocarbon electrode

Electrochemical reduction of CO 2 to value-added chemicals holds promise for carbon utilization and renewable electricity storage. However, selective CO 2 reduction to multi-carbon fuels remains a significant challenge. Here, we report that B/N-doped sp 3 /sp 2 hybridized nanocarbon (BNHC), consisting of ultra-small nanoparticles with a sp 3 carbon core covered by a sp 2 carbon shell, is an efficient electrocatalyst for electrochemical reduction of CO 2 to ethanol at relatively low overpotentials. CO 2 reduction occurs with a Faradaic efficiency of 58.8%-69.1% for ethanol and acetate production at –0.5 ~ –0.6 V (vs. RHE), among which 51.6%-56.0% is for ethanol. The high selectivity for ethanol is due to the integrated effect of sp 3 /sp 2 carbon and B/N doping. Finally, both sp 3 carbon and B/N doping contribute to enhanced ethanol production with sp 2 carbon reducing the overpotential for CO 2 reduction to ethanol.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Electrochemical Oxidation in Garnet-Type Solid Electrolyte by Formation of Point Defects

All-solid-state batteries hold greater promise for improving safety and energy density over conventional battery technology employing organic liquid electrolytes. One of the required features of a Li + conducting solid electrolyte is electrochemical stability, attained thermodynamically or kinetically, within the targeted operating voltage and temperature ranges. Therefore, understanding of the oxidative or reductive degradation mechanism is important to allow the design of stable solid electrolyte materials. This work contributes to building an understanding of the oxidative degradation mechanism in lithium solid electrolytes at cell operating conditions. Here, we have focused on resolving the oxidative decomposition mechanism of Al-doped lithium garnet Li 6.28 Al 0.24 La 3 Zr 2 O 12 (LLZO) as a state-of-the-art inorganic ceramic electrolyte. By combining experimental and computational analyses, we show that oxidation of LLZO occurs by simultaneous loss of oxygen and lithium from the structure, resulting in substoichiometric LLZO, at a moderate temperature (80 °C) and a high electrode potential (4.3 V vs Li/Li + ). Based on X-ray absorption and diffraction analyses, we find that the zirconium coordination shells in LLZO contract while the crystal structure experiences positive chemical strain upon electrochemical oxidation. The results from ex situ structural characterization of both the local structure and crystal symmetry are supported by a substoichiometric LLZO with lithium and oxygen vacancies, modeled by density functional theory (DFT) calculations. These chemical and structural changes in LLZO suppress effective lithium-ion conductivity by an order of magnitude. Formation of lithium and oxygen vacancies in LLZO upon electrochemical oxidation is different from prior thermodynamic predictions of phase decomposition of LLZO. The difference here is that the experiments were conducted at near-room temperature, which can hinder the kinetics of phase separation, and thus, the resultant LLZO solid electrolyte is still single-phase but substoichiometric in Li and O. In conclusion, these findings contribute an important degradation mechanism of the electrolyte, relevant for practical operational conditions of solid-state batteries.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Compensating cylindrical Hohlraum mode 4 asymmetry via capsule thickness tailoring and effects on implosions

We report previously, hydrodynamic simulations suggested that precisely tailoring the capsule ablator thickness (shimming) could counterbalance cylindrical Hohlraum Legendre P 4 drive asymmetries at the capsule in laser indirect drive implosions. As a result, the stagnated deuterium–tritium (DT) fuel areal density P 4 asymmetry is reduced, potentially resulting in a nuclear yield increase. Inflight radiographs of various level of shimmed capsules with plastic (CH) ablators showed that shims can indeed control the in-flight capsule shell P 4 asymmetry, with a linear sensitivity to shim amplitude that is close to analytic estimates and simulations. Furthermore, the stagnated DT fuel areal density P 4 asymmetry inferred from downscattered neutron imaging was reduced when the capsule shim was applied, in agreement with simulations matching the inflight shell asymmetry. A nuclear yield improvement via shim was not observed, as predicted, likely due to implosion instabilities and as built capsule shim deviations from an ideal P 4 shape.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2025

Three-dimensional reconstruction of inertial confinement fusion hot-spot plasma from x-ray and nuclear diagnostics on OMEGA

Multidimensional effects degrade the neutron yield and the compressed areal density of laser-direct-drive inertial confinement fusion implosions of layered deuterium–tritium cryogenic targets on the OMEGA Laser System with respect to 1D radiation-hydrodynamic simulation predictions. A comprehensive physics-informed 3D reconstruction effort is under way to infer hot-spot and shell conditions at stagnation from four x-ray and seven neutron detectors distributed around the OMEGA target chamber. Neutron diagnostics, providing measurements of the neutron yield, hot-spot flow velocity, and apparent ion-temperature distribution, are used to infer the mode-1 perturbation at stagnation. The x-ray imagers record the shape of the hot-spot plasma to diagnose mode-1 and mode-2 perturbations. A deep-learning convolutional neural network trained on an extensive set of 3D radiation-hydrodynamic simulations is used to interpret the x-ray and nuclear measurements to infer the 3D profiles of the hot-spot plasma conditions and the amount of laser energy coupled to the hot-spot plasma. A 3D simulation database shows that larger mode-1 asymmetries are correlated with higher hot-spot flow velocities and reduced laser-energy coupling and neutron yield. Three-dimensional hot-spot reconstructions from x-ray measurements indicate that higher amounts of residual kinetic energy are correlated with higher measured hot-spot flow velocities, consistent with 3D simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2022

Light Absorption by Brown Carbon over the South-East Atlantic Ocean

Biomass burning emissions often contain brown carbon (BrC), which represents a large family of light-absorbing organics that is chemically complex and therefore difficult to estimate their absorption of incoming solar radiation, resulting in large uncertainties in the estimation of the global direct radiative effect of aerosols. Here we investigate the contribution of BrC to the total light absorption of biomass burning aerosols over the South-East Atlantic Ocean with different optical models utilizing a suite of airborne measurements from the ORACLES 2018 campaign by introducing an effective refractive index of black carbon (BC), m eBC = n eBC +ik eBC , that accounts for all possible absorbing components at 660 nm wavelength to facilitate the attribution of absorption at shorter wavelengths. Most values of the imaginary part of the refractive index, k eBC , were larger than those commonly used for BC from biomass burning emissions, suggesting contributions from absorbers beyond BC at 660 nm. The TEM-EDX single particle analysis further suggests that these long-wavelength absorbers might include iron oxides, as iron is found to be present only when large values of k eBC are derived. Using this effective BC refractive index, we find that the contribution of BrC to the total absorption at 470 nm (R BrC,470 ) ranges from ~5–15 %, with the organic aerosol mass absorption coefficient (MAC OA,470 ) at this wavelength ranging from 0.25 ± 0.34 m 2 g -1 to 0.43 ± 0.12 m 2 g -1 . The core-shell model yielded much higher estimates of MAC OA,470 and R BrC,470 than homogeneous mixing models, underscoring the importance of model treatment. Another key finding was that estimates of the BrC contribution at 470 nm from the commonly used AAE (absorption Ångström exponent) attribution method (< 5 %) are much lower than the BrC contribution estimates (R BrC,470 ) using our new methodology that accounts for contributions from both BrC and non-carbonaceous, long-wavelength absorbers, such as magnetite. Thus, it is recommended that application of any optical properties-based attribution method use absorption coefficients at the longest possible wavelength to minimize the influence of BrC at the long wavelength and to account for potential contributions from other absorbing materials.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2022

On the prospects of optical cycling in diatomic cations: effects of transition metals, spin–orbit couplings, and multiple bonds

Molecules with optical cycling centers (OCCs) are highly desirable in the context of fundamental studies as well as applications (e.g., quantum computing) because they can be effectively cooled to very low temperatures by repeated absorption and emission (hence, cycling). Charged species offer additional advantages for experimental control and manipulation. Here, we present a systematic computational study of a series of diatomic radical-cations made of a d-block metal and a p-block ligand, that are isoelectronic (in their valence shell) to the successfully laser-cooled neutral molecules. Using high-level electronic structure methods, we characterize state and transition properties of low-lying electronic states and compute Franck-Condon factors. The computed branching ratios and radiative lifetimes reveal that the electronic transitions analogous to those successfully used in the laser cooling of neutral molecules are less than optimal in the cations. We propose alternative transitions suitable for optical cycling and highlight trends that could assist future designs of OCCs in charged or neutral molecules.

74 ATOMIC AND MOLECULAR PHYSICS↗

DOE OSTI2021

Characterizing Heat Transfer in sCO 2 Cycle Coolers Utilizing the Wilson Plot Technique

Effective design of coolers can decrease the capital expense of supercritical carbon dioxide (sCO 2 ) power plants. Improved datasets reporting heat transfer from the CO 2 in the cycle cooler allow design engineers to calculate the required length of heat exchanger streams more accurately, thus reducing cooler material and heat exchanger cost. This study considered a shell-and-tube heat exchanger with non-condensing CO 2 on the tube side and water flow on the shell side. The average Nusselt number on the tube side was measured employing the Wilson plot technique for a flow at a Reynolds number, Re, equal to 1×10 5 and for a heat flux to mass flux ratio, Q"/G, ranging from 50 to 350 J/kg. The results indicate that the Nusselt number, Nu, increases as the CO 2 pressure decreases towards the critical point. The results also indicate that Nu increases to maximum at Q"/G = 215 J/kg and then decreases with further increases in Q"/G. The difference in Nu measured between the horizontal and vertical heat exchanger with downward flowing CO 2 is less than the experimental error.

20 FOSSIL-FUELED POWER PLANTS↗

DOE OSTI2021

Anomalous Behavior in the Atomic Structure of Nb$^{3}$Sn under High Pressure

In the present study, the local atomic structure of a Nb3Sn superconductor sample has been probed by X-ray absorption fine structure (XAFS) as a function of hydrostatic pressure (from ambient up to 26 GPa) using a diamond anvil cell set-up. The analysis of the Nb-K edge extended X-ray absorption fine structure (EXAFS) data was carried out combining standard multi shell structural refinement and reverse Monte Carlo method to provide detailed in situ characterization of the pressure-induced evolution of the Nb local structure in Nb3Sn. The results highlight a complex evolution of Nb chains at the local atomic scale, with a peculiar correlated displacement of Nb–Nb and Nb–Nb–Nb configurations. Such a local effect appears related to anomalies evidenced by X-ray diffraction in other superconductors belonging to the same A15 crystallographic structure.

36 MATERIALS SCIENCE↗

DOE OSTI2026

Quantum Monte Carlo calculation of 𝛿 NS in 10 C using an effective field theory approach

Here, we compute radiative corrections to the superallowed 𝛽 decay of 10 C in an effective field theory approach using nuclear matrix elements obtained from quantum Monte Carlo calculations. These corrections are an important ingredient in the extraction of the Cabibbo-Kobayashi-Masakawa quark mixing matrix element 𝑉 𝑢⁢𝑑 , and the role of this work is to illuminate the uncertainties arising from nuclear structure. Our results provide good agreement with both the traditional extraction of 𝑉 𝑢⁢𝑑 , as well as with a more recent evaluation performed using the no-core shell model and a dispersion formalism. The dominant uncertainty in this approach is the presence of two unknown low-energy constants that enter into the relevant nuclear matrix elements. Future determinations of these low-energy constants—either from QCD or modeling them with two nucleon amplitudes—would improve the precision of the extraction in this formalism.

beta decay↗

DOE OSTI2025

Accelerating the Structure Exploration of Diverse Bi–Pt Nanoclusters via Physics‐Informed Machine Learning Potential and Particle Swarm Optimization

Bimetallic Bi–Pt nanoclusters exhibit diverse structural motifs, including core-shell, Janus, and mixed alloy configurations, due to the unique bonding characteristics between Bi and Pt atoms. Using density functional theory refinements from ChIMES physically machine-learned potential and CALYPSO particle swarm optimization global searches, 34 Bi20-Pt20 nanoclusters are systematically classified. The results reveal that Bi atoms predominantly occupy surface sites, driven by charge transfer effects. Cohesive energy trends alone prove insufficient for structure differentiation, necessitating a data-driven approach employing principal component analysis and K-means clustering. Furthermore, vibrational, electronic, and infrared spectral analyses provide additional insights into structure-property relationships. The findings offer an original framework for the automated classification and analysis of bimetallic nanoclusters, enhancing the understanding of their stability and functional properties.

bimetallic nanoparticles↗

DOE OSTI2022

How effective is the Brink–Axel hypothesis for astrophysical weak rates?

We explore the effectiveness of the Brink–Axel hypothesis (BAH) for the computation of stellar electron capture (EC) and β-decay (BD) rates, namely that the transition strength function depends only upon the transition energy and not upon the details of the initial state. For this purpose, we calculated Gamow–Teller (GT) strength distributions for a selection of sd-shell nuclides, using two different microscopic models, namely the proton–neutron quasiparticle random phase approximation and the full configuration-interaction shell model, taking into account the first 100 states of both the initial and final nuclides. The GT transition strengths among these levels evolve with initial state energy. These transition strength functions we folded into weak-interaction mediated rates in stellar matter, specifically EC and BD rates, for a range of densities 10 g cm –3 ≤ ρ ≤ 10 11 g cm –3 and range of temperatures 1 GK ≤ T ≤ 30 GK. When transitions from excited states were approximated using the BAH, augmented by so-called 'back-resonance' transitions, the rates were affected by up to three orders of magnitude or more at high temperatures and densities. Furthermore the BAH is not a reliable approximation for the calculation of stellar rates, especially in high temperature–density environments.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2020

Review—Development of Highly Active and Durable Hybrid Compressive Platinum Lattice Catalysts for Polymer Electrolyte Membrane Fuel Cells: Mathematical Modeling and Experimental Work

This review provides a comprehensive overview on the development of highly active and durable platinum catalysts with ultra-low Pt loadings for polymer electrolyte membrane fuel cells (PEMFCs) through a combined mathematical modeling and experimental work. First, simulation techniques were applied to evaluate the validity of the Tafel approximation for the calculation of the mass activity (MA) and specific activity (SA). A one-dimensional agglomeration model was developed and solved to understand the effects of exchange current density, porosity, agglomerate size, Nafion ® film thickness, and Pt loading on the MA and SA. High porosity (> 60%) and agglomerations at high Pt loadings cause the loss of the Tafel approximation and consequently the decrease in MA and SA. A new structure parameter was introduced to estimate the real porous structure using the fractal theory. The volumetric catalyst density was corrected by the fractal dimension (measured by Hg porosimetry), which gave a good agreement with the experimental values. The loading-dependent Tafel equation was then derived, which contains both the utilization and the non-linear scaling factor. Second, activated carbon composite support (ACCS) with optimized surface area, porosity, pore size, and pore size distribution was developed. The hydrophilic/hydrophobic ratio, structural properties (amorphous/crystalline ratio), and the number of active sites were optimized through metal-catalyzed pyrolysis. Stability of ACCS and Pt/ACCS were evaluated using an accelerated stress test (AST). The results indicated that Pt/ACCS showed no significant loss of MA and power density after 5,000 cycles at 1.0–1.5 V, while the commercial Pt/C catalysts showed drastic losses of MA and power density. Finally, monolayers of compressed Pt (core–shell-type Pt 3 Co 1 ) catalysts were structured by diffusing Co atoms (previously embedded in ACCS) into Pt. Compressive Pt lattice (Pt * ) catalysts were synthesized through an annealing procedure developed at the University of South Carolina (USC). The Pt * /ACCS catalyst showed high initial power density (rated) of 0.174 g Pt kW −1 and high stability (24 mV loss) at 0.8 A cm −2 after 30,000 cycles (0.6–1.0 V). The outstanding performance of Pt * /ACCS is due to the synergistic effect of ACCS and compressive Pt * lattice.

25 ENERGY STORAGE↗

DOE OSTI2021

SU(3)-guided realistic nucleon-nucleon interactions for large-scale calculations

We examine nucleon-nucleon realistic interactions, based on their SU(3) decomposition to SU(3)-symmetric components. We find that many of these interaction components are negligible, which, in turn, allows us to identify a subset of physically relevant components that are sufficient to describe the structure of low-lying states in 12C and related observables, such as excitation energies, electric quadrupole transitions, and rms radii. Here, we find that paring down the interaction by half or more yields results that practically coincide with the corresponding ab initio calculations with the full interaction. In addition, we show that while various realistic interactions differ in their SU(3) decomposition, their renormalized effective counterparts exhibit a striking similarity and composition that can be linked to dominant nuclear features such as deformation, pairing, clustering, and spin-orbit effect.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2024

Fluorescence-mediated postcollision interaction in x-ray photoionization of the Xe 𝐾 edge

Postcollision interaction (PCI) in near-threshold photoionization of the K shell of atomic Xe is investigated with hard-x-ray synchrotron radiation. Applying Auger electron spectroscopy, line-shape distortion is monitored in the K-L 2 → L 2 M 4,5 M 4,5 decay channel, where the initial K-L 2 (Kα 2 ) x-ray-emission step mediates the emission of the two continuum electrons. The K-edge result is compared to similar data obtained on direct L 2 M 4,5 M 4,5 decay at the L 2 edge without x-ray-emission. In conclusion, it is found that the evolution of the PCI shift with excess photon energy is very similar at both edges, but a subtle decrease in the PCI shift is observable at the K edge due to the effect of the ultrafast x-ray emission step delaying the PCI energy exchange by a few attoseconds.

74 ATOMIC AND MOLECULAR PHYSICS↗

DOE OSTI2022

CaMn 0.9 Ti 0.1 O 3 based redox catalysts for chemical looping – Oxidative dehydrogenation of ethane: Effects of Na 2 MoO 4 promoter and degree of reduction on the reaction kinetics

Reduction kinetics and stability of 20 wt% Na 2 MoO 4 -promoted CaMn 0.9 Ti 0.1 O 3 were investigated for its applications in Chemical Looping – Oxidative Dehydrogenation (CL-ODH) of ethane, a potential alternative for ethylene production with higher efficiency and lower emissions. Here, the present work reports a kinetics model and parameters for a Na 2 MoO 4 -promoted, Ti-doped CaMnO 3 (CaMn 0.9 Ti 0.1 O 3 ) redox catalyst under H 2 and C 2 H 4 . A first-order reaction model provides the best fit for the reduction of Na 2 MoO 4 /CaMn 0.9 Ti 0.1 O 3 under H 2 , while the C 2 H 4 reduction is well described by an Avrami–Erofe’ev model. The activation energy for C 2 H 4 oxidation is approximately three times higher than that for H 2 conversion, showing that the activation of C 2 H 4 is significantly more difficult on the surface of the redox catalyst. The reduction rate of Na 2 MoO 4 /CaMn 0.9 Ti 0.1 O 3 under H 2 at 750 °C is more than two orders of magnitude greater than that under C 2 H 4 , while the reduction rate of unpromoted CaMn 0.9 Ti 0.1 O 3 is comparable under H 2 and C 2 H 4 , showing that the addition of Na 2 MoO 4 effectively suppresses C 2 H 4 combustion relative to H 2 oxidation. The kinetics results for Na 2 MoO 4 /CaMn 0.9 Ti 0.1 O 3 confirm its excellent selectivity towards hydrogen combustion, making it a promising candidate under CL-ODH. Additionally, the stability of the CaMn 0.9 Ti 0.1 O 3 @ Na 2 MoO 4 core-shell structure, which was the underlying reason for the excellent selectivity, was examined under both shallow and deep reductions. It was determined that deep reduction of the redox catalyst, e.g. higher than 80% solid conversion, would lead to loss of sodium and hence to decreased selectivity for hydrogen combustion. In contrast, the core-shell structure was well-maintained, exhibiting excellent performance after 50 redox cycles when deep reduction of the redox catalyst was avoided. This study offers a basis for both the CL-ODH reactor design and redox catalyst optimizations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Plasmon-Induced CO 2 Conversion on Al@Cu 2 O: A DFT Study

In plasmonic catalysis, localized surface plasmon was leveraged to drive chemical reactions. This approach is promising for catalyzing many challenging reactions at relatively low temperatures and pressures. We apply density functional calculations to provide the insight for the mechanism of plasmon-induced direct CO 2 dissociation on an Al@Cu 2 O core-shell structure, which was observed in a previous experimental study. We show that the interaction of Cu 2 O with CO 2 results in the accessible antibonding states of the adsorbed CO 2 in the range of visible light. Though the intrinsic activation barrier for direct CO 2 dissociation is as high as 3.6 eV, we find that an effective reaction barrier of CO 2 dissociation under photon excitation could be reduced by 2 eV. We also show that the charge transfer is more pronounced in the final state of the dissociation due to the strong hybridization of the dissociated species with Cu 2 O. These results thus provide an explanation for the visible-light-induced direct CO 2 dissociation at relatively low temperature and under ambient pressure. This finding also shows the promising impact of plasmonic catalysis in mitigating carbon emission.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗