Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Shape Matching”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Theoretical spectroscopy of comets

Theoretical spectra of various emitting species in cometary comae were calculated both to investigate physical parameters that are measureable with cometary spectra and to provide fluorescence efficiencies for the derivation of abundances from fluxes. NH was found to be much further from nucleus than proviously thought and, because previous fluorescence efficiencies were much too high, NH is 5 times more abundant than previously thought. The spectrum of S sub 2 in comet I-A-A was analyzed. Despite its short lifetime, S sub 2 reaches fluorescent equlibrium. The equilibrium spectrum matches the relative band strengths in IUE spectra much better than does single cycle fluorescence. Equilibrium (but not single-cylce) flurescence also predicts strong optical emission bands which are seen in ground-based spectra of comet I-A-A. Equilibrium fluorescence efficiencies are much higher than single-cycle fluorescence efficiencies implying S sub 2 is only half as abundant as previously estimated. Fluorescence spectrum of SO was calculated and compared with several IUE spectra including those in which Wallis and Krishna Swamy claim SO to be present. Relative intensities and shapes of bands are inconsistent with any real identification.

Ahearn, Michael F.↗
NASA NTRS1989

U. radio emission from quiescent filaments

Full-disk Very Large Array (VLA) synthesis maps of the quiet Sun indicate that filaments can be seen in emission at 91.6 cm wavelength; they are detected in absorption at shorter microwave wavelengths. The 91.6 cm emission has a brightness temperature of T sub B = 3 x 10(exp 5) K. It is hotter, wider and longer than the underlying filament detected at H alpha wavelengths, but the similarity between the shape, position, elongation and orientation of the radio and optical features suggests their close association. The 91.6 cm emission is attributed to the thermal-bremsstrahlung of a hot transition sheath that envelopes the H alpha filament and acts as an interface between the cool, dense H alpha filament and the hotter, rarefied corona. The transition sheath is seen in emission because of the lower optical depth of the corona at 90 cm wavelength, and the width of this sheet is 10(exp 9) cm. A power law gradient in pressure provides a better match to the observations than a constant pressure model; definitive tests of theoretical models await simultaneous multi-wavelength studies of filaments at different observing angles. When the thermal bremsstrahlung is optically thin, the magnetic field strength in the transition sheath can be inferred from the observed circular polarization. Variable physical parameters of the sheath, such as width, electron density, and electron temperature, can explain controversial reports of the detection of, or the failure to detect, the meter-wavelength counterpart of H alpha filaments.

Lang, Kenneth R.↗
DOE OSTI2025

Genetic variation at transcription factor binding sites largely explains phenotypic heritability in maize

Abstract Comprehensive maps of functional variation at transcription factor (TF) binding sites (cis-elements) are crucial for elucidating how genotype shapes phenotype. Here, we report the construction of a pan-cistrome of the maize leaf under well-watered and drought conditions. We quantified haplotype-specific TF footprints across a pan-genome of 25 maize hybrids and mapped over 200,000 variants, genetic, epigenetic, or both (termed binding quantitative trait loci (bQTL)), linked tocis-element occupancy. Three lines of evidence support the functional significance of bQTL: (1) coincidence with causative loci that regulate traits, includingvgt1,ZmTRE1and the MITE transposon nearZmNAC111under drought; (2) bQTL allelic bias is shared between inbred parents and matches chromatin immunoprecipitation sequencing results; and (3) partitioning genetic variation across genomic regions demonstrates that bQTL capture the majority of heritable trait variation across ~72% of 143 phenotypes. Our study provides an auspicious approach to make functionalcis-variation accessible at scale for genetic studies and targeted engineering of complex traits.

Genetics & Heredity↗
NASA NTRS1993

Transition metals in superheat melts

A series of experiments with silicate melts doped with transition element oxides was carried out at atmospheric pressures of inert gas at temperatures exceeding liquidus. As predicted from the shape of fO2 buffer curves in T-fO2 diagrams the reducing conditions for a particular oxide-metal pair can be achieved through the T increase if the released oxygen is continuously removed. Experimental studies suggest that transition metals such as Cr or V behave as siderophile elements at temperatures exceeding liquidus temperatures if the system is not buffered by the presence of other oxide of more siderophile element. For example the presence of FeO prevents the reduction of Cr2O3. The sequence of decreasing siderophility of transition elements at superheat conditions (Mo, Ni, Fe, Cr) matches the decreasing degree of depletion of siderophile elements in mantle rocks as compared to chondrites.

Jakes, Petr↗
NASA NTRS2019

Analysis of the DebriSat Fragments and Comparison to the NASA Standard Satellite Breakup Model

Existing DOD and NASA satellite breakup models are based on a key laboratory test, the 1992 Satellite Orbital debris Characterization Impact Test, which has supported many applications and matched on-orbit events involving older satellite designs reasonably well over the years. In 2014, the NASA Orbital Debris Program Office, in collaboration with the Air Force Space and Missile Systems Center, The Aerospace Corporation, and the University of Florida, conducted a hypervelocity impact test using a high-fidelity, mock-up satellite, DebriSat, in controlled and instrumented laboratory conditions to update and improve these models. DebriSat is representative of present-day, low Earth orbit satellites, having been constructed with modern spacecraft materials and techniques. The DebriSat fragment ensemble provided a variety of shapes, bulk densities, and dimensions. Fragments down to 2 mm in size are being characterized by their physical and derived properties. The data will inform updates to the current NASA Standard Satellite Breakup Model (SSBM), which was formulated using laboratory and ground-based measurements of on-orbit fragmentation events to describe an average breakup for spacecraft and upper-stage collisions and explosions. Although individual fragment collection and characterization is still ongoing, this paper will present the status of the DebriSat fragment data analysis including cumulative characteristic length and cumulative mass distributions, area-to-mass distributions, and characteristic length versus mass distributions. Additionally, comparisons to the NASA SSBM will be presented.

Murray, James↗
DOE OSTI2025

A semi-analytic estimate for the effective sound speed counterterm in the EFTofLSS

The Effective Field Theory of Large Scale Structure (EFTofLSS) has found tremendous success as a perturbative framework for the evolution of large scale structure, and it is now routinely used to compare theoretical predictions against cosmological observations. The model for the total matter field includes one nuisance parameter at 1-loop order, the effective sound speed, which can be extracted by matching the EFT to full N-body simulations. In this work we first leverage the Layzer-Irvine cosmic energy equation to show that the equation of state can be exactly computed with knowledge of the fully nonlinear power spectrum. When augmented with separate universe methods, we show one can estimate the effective sound speed. This estimate is in good agreement with simulation results, with errors at the few tens of percent level. Here, we apply our method to investigate the cosmology dependence of the effective sound speed and to shed light on what cosmic structures shape its value.

Cosmological perturbation theory in GR and beyond↗
NASA NTRS2001

A Three-Dimensional CFD Investigation of Secondary Flow in an Accelerating, 90 deg Elbow

NASA Glenn Research Center has recently applied the WIND National Code flow solver to an accelerating elbow with a 90 deg. bend to reveal aspects of secondary flow. This elbow was designed by NACA in the early 1950's such that flow separation would be avoided. Experimental testing was also done at that time. The current three dimensional CFD investigation shows that separation has indeed been avoided. Using its three-dimensional capability, this investigation provides various viewpoints in several planes that display the inception, development, and final location of a passage vortex. Its shape first becomes discernible as a vortex near the exit of the bend. This rendition of the exit passage vortex compares well with that found in the experiments. The viewpoints show that the passage vortex settles on the suction surface at the exit about one-third of the distance between the plane wall and midspan. Furthermore, it projects into the mainstream to about one-third of the channel width. Of several turbulence models used in this investigation, the Spalart Alimaras, Baldwin Lomax, and SST (Shear Stress Transport) models were by far the most successful in matching the experiments.

Cavicchi, Richard H.↗
NASA NTRS2001

(Almost) Featureless Stereo: Calibration and Dense 3D Reconstruction Using Whole Image Operations

The conventional approach to shape from stereo is via feature extraction and correspondences. This results in estimates of the camera parameters and a typically spare estimate of the surface. Given a set of calibrated images, a dense surface reconstruction is possible by minimizing the error between the observed image and the image rendered from the estimated surface with respect to the surface model parameters. Given an uncalibrated image and an estimated surface, the camera parameters can be estimated by minimizing the error between the observed and rendered images a function of the camera parameters. We use a very small dense set of matched features to provide camera parameter estimates for the initial dense surface estimate. We then re-estimate the camera parameters as described above, and then re-estimate the surface. This process is iterated. Whilst it can not be proven to converge, we have found that around three iterations results in excellent surface and camera parameters estimates.

Smelyanskiy, V. N.↗
DOE OSTI2021

Anisotropic colloidal interactions & assembly in AC electric fields

In this work, we match experimental and simulated configurations of anisotropic epoxy colloidal particles in high frequency AC electric fields by identifying analytical potentials for dipole-field and dipole-dipole interactions. We report an inverse Monte Carlo simulation algorithm to determine optimal fits of analytical potentials by matching simulated and experimental distribution functions for non-uniform liquid, liquid crystal, and crystal microstructures in varying amplitude electric fields. Two potentials that include accurate particle volume and dimensions along with a concentration dependent prefactor quantitatively capture experimental observations. At low concentrations, an effective ellipsoidal point dipole potential works well, whereas a novel stretched point dipole potential is found to be suitable at all concentrations, field amplitudes, and degrees of ordering. The simplicity, accuracy, and adjustability of the stretched point dipole potential suggest it can be applied to model field mediated microstructures and assembly of systematically varying anisotropic particle shapes.

42 ENGINEERING↗
DOE OSTI2022

Near-field acoustical holography and acoustic power analysis of a simulated, highly heated supersonic jet

Although near-field acoustical holography (NAH) and acoustic intensity analysis have previously been used to investigate the apparent jet noise sources produced by military aircraft, explicit connections to supersonic jet characteristics cannot be made due to a lack of information about the exhaust plume. Here, to begin to bridge this gap and better understand the source information yielded by NAH, the current study instead applies NAH to a virtual measurement of the near-field pressures of a highly heated laboratory-scale supersonic jet generated by large-eddy simulation (LES). The holographic reconstructions of the pressure, particle velocity, and acoustic intensity are found to match the LES-generated acoustic field well and are used to calculate the acoustic power of the jet. The jet's calculated overall acoustic power is compared to the free-stream mechanical power, resulting in an acoustic efficiency of 1.5%. Ray-tracing of the acoustic intensity to the jet centerline generates an axial distribution of the acoustic power origin, showing that almost all the power originates from the supersonic portion of the flow and with the distribution peak upstream of the potential core tip. Holographic reconstruction of the pressures along the nozzle lipline captures the general spectral shape of the LES-generated pressures, though it underestimates the amplitude.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1993

Long-slit ultraviolet spectroscopy of Comet Austin (1990 V)

The spatial distributions of the brightest features in the far-UV spectrum of Comet Austin were measured, and it is found that they are generally similar to those found for Comet Halley during two rocket observations in 1986. As in Halley, the CO profile can be fit to a radial outflow profile for a source whose size is smaller than the instrumental spatial resolution. Neither the shape nor the magnitude of the extended atomic carbon profiles, however, can be satisfactorily explained by the photodissociation of CO. No evidence is found for an extended source of CO in the coma; thus, suggestions that the additional carbon can come directly from grains are difficult to accept since Austin is a low-dust comet. The presence of the O I 1356 A feature implies that there is a photoelectron excitation source in the coma. The measured O I 1304 A distribution is consistent with H2O being the dominant source of oxygen in the coma. The atomic sulfur profile matches that expected for a daughter product of relatively short-lived parents.

Sahnow, David J.↗
NASA NTRS1989

Infrared Emission from Comets

A brief discussion of the infrared observations from 4 to 20 micrometers of seven comets is presented. The observed infrared emission from comets depends primarily on their heliocentric distance. A model based on grain populations composed of a mixture of silicate and amorphous carbon particles in the mass ratio of about 40 to 1, with a power-law size distribution similar to that inferred for comet Halley, is applied to the observations. The model provides a good match to the observed heliocentric variation of both the 10 micrometers feature and the overall thermal emission from comets West and Halley. Matches to the observations of comet IRAS-Araki-Alcock and the antitail of comet Kohoutek require slightly larger grains. While the model does not match the exact profile and position of the 3.4 micrometers feature discovered in comet Halley, it does produce a qualitative fit to the observed variation of the feature's strength as a function of heliocentric distance. The calculations predict that the continuum under the 3.4 micrometers feature is due primarily to thermal emission from the comet dust when the comet is close to the Sun and to scattered solar radiation at large heliocentric distances, as is observed. A brief discussion of the determination of cometary grain temperatures from the observed infrared emission is presented. It is found that the observed shape of the emission curve from about 4 to 8 micrometers provides the best spectral region for estimating the cometary grain temperature distribution.

Swamy, K. S. Krishna↗
DOE OSTI2026

Beyond Mass and Multiscale Environments: What Shapes Low Surface Brightness Galaxies? Evidence from MaNGA

The origin of low surface brightness (LSB) galaxies remains a key open question in galaxy formation, reflecting the balance between internal mechanisms and environmental influence. Using MaNGA integral-field spectroscopy, we investigate whether LSB and high surface brightness (HSB) galaxies of comparable stellar mass (9 < logM * < 10) occupy distinct environments or differ primarily through internal evolution. Our late-type sample comprises 113 central and 29 satellite LSB galaxies, and 374 central and 142 satellite HSB galaxies. We characterize environments on scales from ∼100 kpc to 10 Mpc, analyzing radial profiles of stellar mass surface density (Σ * ), star formation activity, and gas-phase metallicity. Central LSB and HSB galaxies inhabit similarly low-density large-scale (>200 kpc) environments, but LSB galaxies are more isolated on small scales (∼100 kpc). Even after matching in stellar mass and environment, LSB galaxies show systematically lower Σ * , Σ SFR , and metallicities, often hosting diffuse, weakly star-forming bulges embedded in extended disks. These results indicate that LSB structure and star formation are not primarily governed by a large-scale environment or halo mass. While secondary halo properties such as spin, concentration, or gas accretion history are often invoked, their environmental dependence appears weak. Instead, LSB–HSB differences for centrals likely reflect divergent assembly or interaction histories and internal processes—such as angular momentum-driven disk evolution or inefficient gas conversion—largely decoupled from a large-scale environment. Nonetheless, the environment still influences the observed star formation and chemical differences between central and satellite LSB galaxies.

Shen, Mengting [Xiamen University (China); SDSS Co↗
NASA NTRS1980

Evaluation of approximate methods for the prediction of noise shielding by airframe components

An evaluation of some approximate methods for the prediction of shielding of monochromatic sound and broadband noise by aircraft components is reported. Anechoic-chamber measurements of the shielding of a point source by various simple geometric shapes were made and the measured values compared with those calculated by the superposition of asymptotic closed-form solutions for the shielding by a semi-infinite plane barrier. The shields used in the measurements consisted of rectangular plates, a circular cylinder, and a rectangular plate attached to the cylinder to simulate a wing-body combination. The normalized frequency, defined as a product of the acoustic wave number and either the plate width or cylinder diameter, ranged from 4.6 to 114. Microphone traverses in front of the rectangular plates and cylinders generally showed a series of diffraction bands that matched those predicted by the approximate methods, except for differences in the magnitudes of the attenuation minima which can be attributed to experimental inaccuracies. The shielding of wing-body combinations was predicted by modifications of the approximations used for rectangular and cylindrical shielding. Although the approximations failed to predict diffraction patterns in certain regions, they did predict the average level of wing-body shielding with an average deviation of less than 3 dB.

Ahtye, W. F.↗
DOE OSTI2025

Bond-centric modular design of protein assemblies

Directional interactions that generate regular coordination geometries are a powerful means of guiding molecular and colloidal self-assembly, but implementing such high-level interactions with proteins remains challenging due to their complex shapes and intricate interface properties. Here we describe a modular approach to protein nanomaterial design inspired by the rich chemical diversity that can be generated from the small number of atomic valencies. We design protein building blocks using deep learning-based generative tools, incorporating regular coordination geometries and tailorable bonding interactions that enable the assembly of diverse closed and open architectures guided by simple geometric principles. Experimental characterization confirms the successful formation of more than 20 multicomponent polyhedral protein cages, two-dimensional arrays and three-dimensional protein lattices, with a high (10%–50%) success rate and electron microscopy data closely matching the corresponding design models. Due to modularity, individual building blocks can assemble with different partners to generate distinct regular assemblies, resulting in an economy of parts and enabling the construction of reconfigurable networks for designer nanomaterials.

Biomaterials – proteins↗
NASA NTRS2006

The F-15B Lifting Insulating Foam Trajectory (LIFT) Flight Test

A series of flight tests has been performed to assess the structural survivability of space shuttle external tank debris, known as divots, in a real flight environment. The NASA F-15B research test bed aircraft carried the Aerodynamic Flight Test Fixture configured with a shuttle foam divot ejection system. The divots were released in flight at subsonic and supersonic test conditions matching points on the shuttle ascent trajectory. Very high-speed digital video cameras recorded the divot trajectories. The objectives of the flight test were to determine the structural survivability of the divots in a real flight environment, assess the aerodynamic stability of the divots, and provide divot trajectory data for comparison with debris transport models. A total of 10 flights to Mach 2 were completed, resulting in 36 successful shuttle foam divot ejections. Highspeed video was obtained at 2,000 pictures per second for all of the divot ejections. The divots that were cleanly ejected remained structurally intact. The conical frustum-shaped divots tended to aerodynamically trim in both the subsonic and supersonic free-stream flow.

Corda, Stephen↗
NASA NTRS2010

Using Cassini UVIS Data to Constrain Enceladus' Libration State

Given the non-spherical shape of Enceladus, the satellite may experience gravitational torques that will cause it to physically librate as it orbits Saturn. Physical libration would produce a diurnal oscillation in the longitude of Enceladus' tidal bulge, which could have a profound effect on the diurnal stresses experienced by the surface of the satellite. Although Cassini ISS has placed an observational upper limit on Enceladus' libration amplitude, stall amplitude librations may have geologically significant consequences. For example, a physical libration will affect heat production along the tiger stripes as produced by tidal shear heating and a previous study has explored possible libration states that provided better matches to Cassini CIRS observations of heat along the tiger stripes. Cassini UVIS stellar occultations provided measurements of the column density of the Enceladus plume at two different points in Enceladus' orbit and find comparable column density values. This column density may be a reflection of the amount of the tiger stripe rifts in tension and able to vent volatiles and a physical libration will also affect the fraction of tiger stripe in tension at different points in the orbit. We have modeled the expected fraction of tiger stripes in tension under different libration conditions. Without libration the amount of tiger stripe rifts in tension at both paints in the orbit would not be comparable and therefore may not allow comparable amounts of volatiles to escape. However, we identify libration conditions that do allow comparable amounts of the tiger stripes to be in tension at each point in the orbit, which might lead to comparable column densities. The librations identified coincide with possible librations states identified in the earlier study, which used Cassini CIRS observations.

Hurford, Terry A.↗
NASA NTRS2016

Infrared Studies of the Reflective Properties of Solar Cells and the HS376 Spacecraft

In 2015, a selection of HS-376 buses were observed photometrically with the United Kingdom Infrared Telescope (UKIRT) to explore relationships between time-on-orbit and Near Infrared (NIR) color. These buses were chosen because of their relatively simple shape, for the abundance of similar observable targets, and their surface material being primarily covered by solar cells. While the HS-376 spacecraft were all very similar in design, differences in the specific solar cells used in the construction of each model proved to be an unconstrained variable that could affect the observed reflective properties. In 2016, samples of the solar cells used on various models of HS-376 spacecraft were obtained from Boeing and were analyzed in the Optical Measurements Center at the Johnson Space Center using a visible-near infrared field spectrometer. The laboratory-based spectra are convolved to match the photometric bands previously obtained using UKIRT and compared with the on-orbit photometry. The results and future work are discussed here.

Frith, James↗