Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SULFONATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Supercapacitor behavior of α-MnMoO{sub 4} nanorods on different electrolytes

Graphical abstract: SEM image of α-MnMoO{sub 4} nanorods on FTO substrate. Highlights: ► Synthesis of α-MnMoO{sub 4} nanorods by spin coating method. ► First study on the effect of electrolyte on the pseudocapacitance behavior. ► α-MnMoO{sub 4} nanorods exhibit maximum specific capacitance of 998 F/g. ► At higher scan rates p-TSA electrolyte exhibits superior capacitive behavior. -- Abstract: α-MnMoO{sub 4} nanorods were prepared on conducting glass substrate via sol–gel spin coating method at the optimum doping level. The effect of electrolyte on the pseudocapacitance behavior of the α-MnMoO{sub 4} nanorods was studied using para toluene sulfonic acid (p-TSA), sulfuric acid (H{sub 2}SO{sub 4}) and hydrochloric acid (HCl) as electrolytes. X-ray diffraction analysis reveals the formation of α-MnMoO{sub 4} in monoclinic phase. FTIR spectra contain vibrational bands associated with Mo=O, M–O and Mo–O–Mo bonds. SEM image reveals the formation of nanorods. Supercapacitor behavior has been studied using cyclic voltammetry (CV) analysis. α-MnMoO{sub 4} nanorods exhibit maximum specific capacitance of 998 F/g at a scan rate of 5 mV/s in H{sub 2}SO{sub 4} electrolyte while a specific capacitance of 784 F/g and 530 F/g have been obtained using p-TSA and HCl electrolytes, respectively. At higher scan rates p-TSA electrolyte exhibits superior capacitive behavior than H{sub 2}SO{sub 4}.

36 MATERIALS SCIENCE↗

[Bmim][TfO] ionic liquid-assisted oriented growth of Co{sub 3}O{sub 4} nanoworms

Graphical abstract: Display Omitted Highlights: ► First time, we have used [Bmim][TfO]IL for the synthesis of Co{sub 3}O{sub 4} nanoworms. ► IL assists to form oriented growth of cubic Co{sub 3}O{sub 4} nanoworms without intermediate. ► Cubic Co{sub 3}O{sub 4} nanoworms are in the range of 20 nm width and 100–200 nm length. ► IL and oxidizing agent have not altered the Co{sub 3}O{sub 4} structural characteristics. ► Co{sub 3}O{sub 4} nanoworms exhibit crystalline domain dependent weak ferromagnetism. -- Abstract: Monodispersed worm-like structure of Co{sub 3}O{sub 4} nanocrystals of 20 nm width and 100–200 nm length are prepared directly without any intermediate product by 1-n-butyl-3-methylimidazolium trifluoromethane sulfonate ionic liquid ([Bmim][TfO] IL) assisted precipitation method. The higher concentration of [Bmim][TfO] IL in the reaction medium leads to the formation of homogeneous nanoworms. The effect of synthesis temperature and the oxidizing agent (H{sub 2}O{sub 2}) on the Co{sub 3}O{sub 4} particle's morphology and their magnetic properties are discussed. Thermogravimetric analysis (TGA), powder X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), field emission scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM) analysis were used to characterize the Co{sub 3}O{sub 4} monodispersed nanoworms. The magnetic property of the spinel Co{sub 3}O{sub 4} nanoworms is highly dependent on crystalline domains and exhibits weak ferromagnetic behavior with a narrow hysteresis loop opening.

36 MATERIALS SCIENCE↗

Novel method of room temperature ionic liquid assisted Fe{sub 3}O{sub 4} nanocubes and nanoflakes synthesis

Graphical abstract: - Highlights: • First time [Bmim][TfO] IL is used for the Fe{sub 3}O{sub 4} nanoparticle synthesis. • Novel method tunes Fe{sub 3}O{sub 4} nanocubes and nanoflakes forms influenced by the base and IL. • Fe{sub 3}O{sub 4} oxidized topotactically into γ-Fe{sub 2}O{sub 3} nanoparticles by annealing and base. • Uniform morphology with average size of 33 nm negligible superstructure are formed. • Ms values are characterized by thin layer of γ-Fe{sub 2}O{sub 3} on the nanoparticle surface. - Abstract: For the first time, the nanomagnetite superparamagnetic particles are successfully synthesized by precipitation method using 1-n-butyl-3-methylimidazolium trifluoromethane sulfonate [Bmim][TfO] ionic liquid medium/surfactant. The obtained Fe{sub 3}O{sub 4} particles are nanocubes and nanoflakes and this formation is influenced by the base concentration and anisotropic circumstances produced by the ionic liquid and their size varies from 20 nm to 150 × 300 nm (width × length). The synthesized magnetite nanoparticles are characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), Raman spectroscopy, Field emission scanning electron microscopy (FE-SEM), Transmission electron microscopy (TEM) and Vibrating sample magnetometer (VSM) studies. The results show that the core of the Fe{sub 3}O{sub 4} nanoparticles is surrounded by a thin layer of γ-Fe{sub 2}O{sub 3} by topotactical partial oxidation, which is remarkably proceed with the subsequent calcination. The magnetite nanocubes have high saturation magnetization value and exhibit superparamagnetic hysteresis loop.

36 MATERIALS SCIENCE↗

Silver nanowire/polyaniline composite transparent electrode with improved surface properties

Highlights: • AgNWs/PANI transparent electrode was prepared by layer-by-layer coating method. • The surface roughness of the electrode reached to 6.5 nm (root mean square). • The electrode had reasonable sheet resistance (25 Ω/□) and transmittance (83.5%). - Abstract: Silver nanowires (AgNWs) are as potential candidates to replace indium tin oxide (ITO) in transparent electrodes because of their preferred conducting and optical properties. However, their rough surface properties are not favorable for the fabrication of optoelectronic devices, such as displays and thin-film solar cells. In the present investigation, AgNWs/polyaniline composite transparent electrodes with better surface properties were successfully prepared. AgNWs were incorporated into polyaniline:polystyrene sulfonate (PANI:PSS) by layer-by-layer coating and mechanical pressing. PANI:PSS decreased the surface roughness of the AgNWs electrode by filling the gap of the random AgNWs network. The transparent composite electrode had decreased surface roughness (root mean square 6.5 nm) with reasonable sheet resistance (25 Ω/□) and transmittance (83.5%)

36 MATERIALS SCIENCE↗

Optical property investigations of polystyrene capped Ca{sub 2}P{sub 2}O{sub 7}:Dy{sup 3+} persistent phosphor

Highlights: • Synthesis of polymer capped pyrophosphate phosphors by citrate gel method. • Radiative lifetime is calculated from parameters of Judd-Ofelt theory and ICP-AES. • Reaction mechanism is discussed leading to high photoluminescence efficiency. • PL emission spectrum reveals broad band emission suitable for solid state lighting. - Abstract: By virtue of enhanced photosensivity, good optical response and better thermal stability, organic–inorganic hybrid materials are contemplated as one of the alternatives for designing advanced optoelectronic devices and innovative photonic applications. A novel inorganic organic hybrid Ca{sub 2}P{sub 2}O{sub 7}:Dy{sup 3+} phosphor has been fabricated by Pechini method. The optical property of synthesized phosphor is successfully altered by the in corporation of polystyrene sulfonic acid as capping agent in the colloidal solution. The phase purity and the average particle size of the prepared phosphor were calculated from X-ray diffraction (XRD) employing Debye Scherrer method. The morphological and chemical investigations were carried out through scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) analysis. The radiative transitions are explained on the basis of Judd-Ofelt theory and on the basis of derived parameters, the radiative lifetime of persistent hybrid Ca{sub 2}P{sub 2}O{sub 7}:Dy{sup 3+} phosphor is calculated as 5.33 ms. This paper explores the mechanism leading to high photoluminescence efficiency using organic capping additives. The photoluminescence (PL) graphs reveal broad band emission at 482 nm (blue) and 573 nm (yellow) corresponding to {sup 4}F{sub 9/2}-{sup 6}H{sub 15/2} and {sup 4}F{sub 9/2}-{sup 6}H{sub 13/2} transitions of Dy{sup 3+}, respectively. The Commission International De I-Eclairage (CIE) chromaticity co-ordinates were calculated from emission spectra and the values (x, y) were approaching to standard value of white emission. The synthesized pyrophosphate phosphors can thereby account in multiple potential applications including white light emitting diodes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phenomenal improvement of external quantum efficiency, detectivity and responsivity of nitrogen doped graphene quantum dot decorated zinc oxide nanorod/polymer schottky junction UV detector

Highlights: • ZnO nanorods/conducting polymer Schottky junction UV detector was fabricated. • GQDs and NGQDs were attached with nanorods to improve the detector performance. • The photodetector demonstrated high EQE, detectivity and responsivity. • NGQDs sensitized nanorod based detectors showed superior performances. • NGQD sensitized device showed high photocurrent even at lower intensity of UV light. - Abstract: Photodetector properties of nitrogen doped graphene quantum dot (NGQD) sensitized ZnO nanorods/poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) Schottky junction has been investigated. The photodetector demonstrated superior external quantum efficiency (EQE) (∼57681% at −1 V bias) at wavelength ∼340 nm, which is 4 times higher than graphene quantum dot (GQD) modified ZnO NRs based detector and 35 times higher than pristine ZnO NRs detector. NGQD modified detectors also showed higher responsivity (∼158 A/W), detectivity (8.7 × 10{sup 12} Hz{sup 1/2}/W) at 340 nm wavelength. The response and recovery times of the detector is very fast compared to GQD modified and pristine ZnO nanorod based detectors. Our UV detector also demonstrated higher photocurrent even at lower intensity range of incident light.

36 MATERIALS SCIENCE↗

Impact of humidity on gas transport in polybenzimidazole membranes

Polybenzimidazoles (PBIs) are promising materials for high temperature H 2 /CO 2 separation in applications such as steam reforming and pre-combustion carbon capture where significant amounts of water are often present. However, PBIs are hydrophilic, and the impact of humidity on PBI gas separation properties is relatively unexplored. Furthermore, opportunity exists to elucidate the interplay between plasticization, free volume, and gas transport in glassy polymer membranes such as PBIs. Here, this study investigates the effect of humidity on H 2 , O 2 , and CO 2 permeabilities at 35 °C in a commercial PBI and two sulfone-containing PBIs. Water uptake significantly reduces PBI gas permeabilities at low humidities due to competitive sorption and antiplasticization. At high humidities, plasticization increases the permeabilities of larger gases in more hydrophilic PBIs. Effective fractional free volumes evaluated from gas permeation data and previously reported water sorption and dilation data suggest water plasticizes PBIs by increasing accessible free volume via enhanced molecular dynamics rather than by creating new free volume cavities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interfacial interactions between polymers and selective adsorbents influence ion transport properties of boron scavenging ion-exchange membranes

The recent emergence of adsorptive ion-exchange membranes (IEMs), designed by the synergistic integration of highly selective porous aromatic frameworks (PAFs) with ion-exchange polymers, has enabled simultaneous desalination and targeted removal of specific solutes (e.g., mercury, iron, boron, etc.). While the addition of highly selective PAFs to IEMs yields membranes with entirely new functions, PAF-polymer interactions, and the effects of such interactions on ion transport properties of the membranes, are not well understood. In this study, we developed cross-linked adsorptive cation- and anion-exchange membranes (CEMs and AEMs) for simultaneous desalination and boron removal via in-situ formation of the cross-linked polymer network around the boron selective PAF particles. Here we systematically investigated the influence of PAF loading level on PAF-polymer interactions as well as the equilibrium and transport properties of the adsorptive IEMs. The interactions between the PAF and the ion-exchange polymer matrix differed for the CEMs and AEMs due to differences in the fixed charge group chemistry. Notably, the sulfonate groups of the CEMs can form hydrogen bonds with the hydroxyl groups of the PAF, while the quaternary ammonium groups in the AEMs cannot. These differences in interfacial interactions did not significantly impact counter-ion transport across the adsorptive IEMs but had a significant influence on co-ion transport, which affected the counter-ion/co-ion selectivity of the membranes. The selectivity of the adsorptive CEMs decreased while that of the adsorptive AEMs increased with PAF loading level. The results of this study underscore the importance of controlling interfacial interactions when designing adsorptive IEMs for simultaneous water desalination and solute capture and recovery.

36 MATERIALS SCIENCE↗

Complete coverage fouling model for constant flux crossflow ultrafiltration and experimental validation

A complete coverage model is proposed to describe fouling in constant flux crossflow ultrafiltration. Constant flux crossflow fouling experiments were conducted using dilute latex bead suspensions and commercial poly(ether sulfone) flat sheet ultrafiltration membranes to investigate the influence of operating conditions on evolution of transmembrane pressure (ΔP, TMP) with time. Changes in permeate flux or crossflow rate had little influence on the normalized TMP profile at high latex bead concentration (i.e., above 25 ppm) because the membrane surface was covered with latex beads. At low concentration (i.e., below 25 ppm), increases in permeate flux or foulant concentration increased normalized ΔP. However, this increase in normalized ΔP with permeate flux or foulant concentration diminishes when the permeate flux/concentration is high enough to overwhelm particle removal due to crossflow. Furthermore, these results are in good agreement with the new complete coverage model which describes the influence of operating parameters on fouling better than the previous model.

36 MATERIALS SCIENCE↗

Influence of elevated temperature and oxygen on the capture of radioactive iodine by silver functionalized silica aerogel

Reprocessing is considered a competent strategy for spent nuclear fuel management, yet radioiodine ( 129 I) is emitted in reprocessing off-gas as a hazardous byproduct. Silver functionalized silica aerogel (Ag 0 -aerogel), a promising iodine capture material, experiences a reduction in its capacity after prolonged exposure to off-gas components at elevated temperatures, a phenomenon termed as aging. To fully understand this process, we isolated the contribution of each aging factor, exposing Ag 0 -aerogel samples to N 2 and dry air gas streams, respectively, at 150 °C for different time periods. Aged samples were loaded with I 2 to examine the capacity change and comprehensively characterized to investigate the evolution of their properties. Results show that temperature alone did not alter Ag 0 -aerogel's capacity but triggered Ag 0 nanoparticles sintering and generated organic sulfur species. The presence of O 2 reduced the capacity by ~20 %, causing (i) formation of silver sulfide (Ag 2 S) crystals and (ii) oxidation of Ag-thiolate (Ag-S-r) to Ag sulfonate (Ag-SO 3 -r). Given that Ag 2 S readily adsorbs I 2 , the formation of Ag-SO 3 -r is the major inhibitor for iodine adsorption. This hypothesis was supported by density functional theory (DFT) simulations. These findings unraveled key mechanisms of Ag 0 -aerogel aging, which are useful in the development of materials that withstand realistic spent-nuclear-fuel-reprocessing off-gas conditions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Interaction of the cesium cation with calix[4]arene-bis(t-octylbenzo-18-crown-6): Extraction and DFT study

From extraction experiments and c-activity measurements, the extraction constant corresponding to the equilibrium Cs+ (aq) + I (aq) + 1 (org),1Cs+ (org) + I (org) taking place in the two-phase water-phenyltrifluoromethyl sulfone (abbrev. FS 13) system (1 = calix[4]arene-bis(t-octylbenzo-18-crown-6); aq = aqueous phase, org = FS 13 phase) was evaluated as logKex (1Cs+, I) = 2.1 0.1. Further, the stability constant of the 1Cs+ complex in FS 13 saturated with water was calculated for a temperature of 25 C: log borg (1Cs+) = 9.9 0.1. Finally, by using quantum mechanical DFT calculations, the most probable structure of the cationic complex species 1Cs+ was derived. In the resulting 1Cs+ complex, the central cation Cs+ is bound by eight bond interactions to six oxygen atoms of the respective 18-crown-6 moiety and to two carbons of the corresponding two benzene rings of the parent ligand 1 via cation p interaction.

cesium cation↗

Support size regulated ruthenium-sulfoacid-nitrogen sites intensify cellulose hydrogenolysis to 1,2-propylene glycol

Rational design of metal-acid-base multifunctional catalysts for upgrading cellulose to 1,2-propylene glycol (1,2-PG) is of great significance for building a sustainable world. However, it is time-consuming and tedious to regulate metal-acid-base sites to balance major reactions to render a high 1,2-PG yield. We herein report support size simultaneously regulated ruthenium-sulfoacid-nitrogen (Ru–SO 3 H–N) sites for cellulose hydrogenolysis to high yield 1,2-PG. Originated from the depolymerization and reassembly of zinc-1,3,5-benzenetricarboxylic acid (ZnBTC) fiber with zeolitic imidazolate framework (ZIF-8) in water, 2-methylimidazole infiltrated nanorod (ZnBTC(mIM)) with a varied aspect ratio was fabricated by varying the feed ratio of ZIF-8/ZnBTC. Upon being pyrolyzed, sulfonated and impregnated with Ru ions, the supported sites were tailored in terms of Ru single-atom/nanocluster ratio, SO 3 H acidity and N basicity. Further, the elaborately fabricated catalyst delivers 32.3% yield of 1,2-PG, corresponding to a high productivity of 67.71 mol h -1 g Ru -1 and a large turnover number of 34193, two and three orders of magnitude higher than those by using other Ru-containing catalytic systems for cellulose hydrogenolysis. The excellent performance can be attributed to optimized electronic and molecular structure of Ru–SO 3 H–N sites that can improve rate-determining cellulose hydrolysis/fructose hydrogenolysis, pivotal glucose isomerization with others to proceed at a matched rate. This study opens a new avenue to facilely tailor the metal-acid-base sites by rational design of size controlled supporting matrix.

1,2-Propylene glycol↗

Constructing synthetic organosulfur additive for high voltage lithium-ion batteries

Despite its high anodic stability, common organosulfur solvents such as ethyl methyl sulfone and sulfolane typically exhibit poor solid-electrolyte interphase (SEI) formation capability. Here, to address this, the fluorinated organic sulfate 4-(trifluoromethyl)-1,3,2-dioxathiolane 2,2-dioxide (TFDTD) was developed as an effective additive for tailoring organosulfur-based electrolytes in lithium-ion batteries. This development was guided by the functionality selection principle and careful evaluation of feasibility in organic synthesis. TFDTD can be readily synthesized through the reaction between trifluoropropylene glycol and sulfuryl chloride. The ring structure of the organic sulfate enables the formation of a stable SEI on the anode, while the fluorination of the sulfate not only enhances its chemical stability and oxidation potential, but also its effectiveness to protect the anode by increasing its reduction potential, rendering it preferentially reduced on the anode surface before the decomposition of other electrolyte components. Introducing TFDTD facilitates the generation of a robust solidelectrolyte interphase on the graphite anode, significantly enhancing cell performance. Moreover, coupling the use of TFDTD with vinylene carbonate provides further protection on the cathode surface, enabling exceptionally stable, high-voltage, long-term cycling of Gr||NMC full cells.

Functionality selection principle↗

Impact of purification conditions and history on A 2A adenosine receptor activity: The role of CHAPS and lipids

The adenosine A 2A receptor (A 2A R) is a much-studied class A G protein-coupled receptor (GPCR). For biophysical studies, A 2A R is commonly purified in a detergent mixture of dodecylmaltoside (DDM), 3-(3-cholamidopropyl) dimethylammoniopropane sulfonate (CHAPS), and cholesteryl hemisuccinate (CHS). Here we studied the effects of CHAPS on the ligand binding activity and stability of wild type, full-length human A 2A R. We also tested the cholesterol requirement for maintaining the active conformation of the receptor when solubilized in detergent micelles. To this end, the receptor was purified using DDM, DDM/CHAPS, or the short hydrocarbon chain lipid 1,2-dihexanoyl-sn-glycero-3-phosphocholine (DHPC, di-6:0PC). After solubilization in DDM, DDM/CHAPS, or DHPC micelles, although A 2A R was found to retain its native-like fold, its binding ability was significantly compromised compared to DDM or DDM/CHAPS with CHS. It therefore appears that although cholesterol is not needed for A 2A R to retain a native-like, α-helical conformation, it may be a critical component for high affinity ligand binding. Further, this result suggests that the conformational differences between the active and inactive protein may be so subtle that commonly used spectroscopic methods are unable to differentiate between the two forms, highlighting the need for activity measurements. Furthermore, the studies presented in this paper also underline the importance of the protein’s purification history; i.e. , detergents that interact with the protein during purification affect the ligand binding properties of the receptor in an irreversible manner.

59 BASIC BIOLOGICAL SCIENCES↗

Ion partitioning between brines and ion exchange polymers

Quantitative failure of the ideal Donnan model to predict ion partitioning between relatively dilute electrolyte aqueous solutions and ion exchange polymers arises from neglecting non-ideal behavior of ions. Hypothetically, when a water swollen, charged polymer is equilibrated with concentrated salt solutions, most of the fixed charge groups are neutralized by sorbed counter-ions, which can screen electrostatic effects and create, in the membrane, an environment thermodynamically similar to that experienced by ions in the external electrolyte solution. In this study, a combined experimental and theoretical approach was used to test this hypothesis. A fundamental study of ion partitioning between a cation exchange membrane based on cross-linked poly(p-styrene sulfonate-co-divinylbenzene) and NaCl and CaCl2 concentrated brines is presented. At high electrolyte concentrations, the experimentally measured ion activity coefficients in the membrane match those in the contiguous external solution, and the ideal Donnan model provides an accurate prediction of co-ion and counter-ion concentrations in the polymer. This physical picture was further confirmed by the recently developed Manning-Donnan model.

catalysis (heterogeneous)↗

Understanding the impact of SPMAK and PEGPEA in crosslinked PEGDA membranes: Methanol-carboxylate co-transport behavior and correlating structure-physicochemical-transport properties

Investigating multicomponent transport in dense, hydrated polymer membranes is necessary in applications such as fuel cells, electrolyzers, and desalination systems. Of particular interest are photoelectrochemical CO 2 reduction cells (PEC-CRC) which produce liquid products such as alcohols (methanol) and carboxylates (formate, acetate). Flux coupling and competitive sorption behavior of these products (solutes) have been found to affect permselectivity, thereby motivating us to investigate fundamental membrane structure-physicochemical-transport relationships. Past research has shown that systematic tuning of crosslinked cation exchange membranes (CEMs) with charge-neutral monoacrylate monomers containing alkyl and phenyl groups (i.e., poly(ethylene glycol) methacrylate (PEGMA), and poly(ethylene glycol) phenyl ether acrylate (PEGPEA)) can suppress acetate transport (permeability) in co-permeation with methanol. To further investigate this transport behavior and to enhance membrane ionic conductivities, 3-sulfopropyl methacrylate potassium (SPMAK), a sulfonated monoacrylate monomer is incorporated here. SPMAK content is varied with neutral PEGPEA and diacrylate crosslinker, poly (ethylene glycol) diacrylate (PEGDA) of two different chain lengths (n = 10 and 13) to prepare membranes of various compositions. Electrochemical and physicochemical properties including ionic conductivity, ion exchange capacity, and water uptake increase with increasing charged SPMAK content. Different states of water within hydrated membranes are probed using differential scanning calorimetry (DSC), where increasing intermediate (loosely bound) water is observed with increasing hydrophilic SPMAK content. The transport behavior of methanol and carboxylates (formate, acetate, propionate) are investigated, where permeabilities vary as methanol > formate > acetate ≈ propionate. Interestingly, permeabilities decrease with increasing PEGPEA content and are more dependent on solute diffusion than sorption. Permeabilities and diffusivities decrease while permselectivities increase with decreasing PEGDA chain length.

25 ENERGY STORAGE↗