Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SLURRIES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

New Composite Membranes for High Throughput Solid-Liquid Separations at the Savannah River Site

New Composite Membranes for High Throughput Solid-Liquid Separations at the Savannah River Site R. Bhave (Oak Ridge National Laboratory. Oak Ridge, TN) and M. R. Poirier* (Savannah River National Laboratory, Aiken SC) Solid-liquid separation is the limiting step for many waste treatment processes at the Savannah River Site. SRNL researchers have identified the rotary microfilter as a technology to improve the rate of solid-liquid separation processes. SRNL is currently developing the rotary microfilter for radioactive service and plans to deploy the technology as part of the small column ion exchange process. The rotary microfilter can utilize any filter media that is available as a flat sheet. The current baseline membrane is a 0.5 micron (nominal) porous metal filter (Pall PMM050). Previous testing with tubular filters showed that filters composed of a ceramic membrane on top of a stainless steel support produce higher flux than filters composed only of porous metal. The authors are working to develop flat sheet filter media composed of a ceramic membrane and/or ceramic-metal composite on top of a porous stainless steel support that can be used with the rotary microfilter to substantially increase filter flux resulting in a more compact, energy efficient and cost-effective high level radioactive waste treatment system. Composite membranes with precisely controlled pore size distribution were fabricated on porous metal supports. High quality uniform porous metal (316SS) supports were fabricated to achieve high water permeability. Separative layers of several different materials such as ultrafine metal particles and ceramic oxides were used to fabricate composite membranes. The fabrication process involved several high temperature heat treatments followed by characterization of gas and liquid permeability measurements and membrane integrity analysis. The fabricated composite membrane samples were evaluated in a static test cell manufactured by SpinTek. The composite membranes were evaluated on several feed slurries: 1 wt. % strontium carbonate in deionized water, 1 wt. % monosodium titanate in simulated salt solution, and 1 wt. % simulated sludge in simulated salt solution and deionized water. Flux as a function of feed flow rate and transmembrane pressure was measured for each of the above described feed slurries. The authors will discuss the new membrane development efforts, waste slurry filtration performance evaluations and scale-up considerations.

Bhave, Ramesh R↗

Aerosol Formation from High-Pressure Sprays for Supporting the Safety Analysis for the Hanford Waste Treatment and Immobilization Plant

The Waste Treatment and Immobilization Plant (WTP) at Hanford is being designed and built to pretreat and vitrify waste currently stored in underground tanks at Hanford. One of the postulated events in the hazard analysis for the WTP is a breach in process piping that produces a pressurized spray with small droplets that can be transported into ventilation systems. Literature correlations are currently used for estimating the generation rate and size distribution of aerosol droplets in postulated spray releases. These correlations, however, are based on results obtained from small engineered nozzles using Newtonian liquids that do not contain slurry particles and thus do not accurately represent the fluids and breaches in the WTP. A test program was developed to measure the generation rate of droplets suspended in a test chamber and droplet size distribution from a range of prototypic sprays. A novel test method was developed to allow measurement of sprays from small to very large breaches and also includes the effect of aerosol generation from splatter when the spray impacts on walls. Results show that the aerosol generation rate increases with increasing the orifice area, though with a weaker dependence on orifice area than the currently-used correlation. A comparison of water sprays to slurry sprays with 8 to 20 wt% gibbsite or boehmite particles shows that the presence of slurry particles depresses the release fraction compared to water for droplets above 10 μm and increases the release fraction below this droplet size.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Manufacturing of Monolithic Electrodes from Low-Cost Renewable Resources

Lignin, a low-cost, biomass derived precursor, was selected as an alternative for carbon based free standing anodes in Li-ion batteries. Industrially scalable melt-spinning and melt-blowing synthesis methods were developed at Oak Ridge National Laboratory that are compatible with industrially viable production. Engineering studies predict that LCFs can be manufactured at $3/lb using these technologies, which compares favorably to $12/lb for battery grade graphite. The physical properties of lignin carbon fibers, specifically the tunable electrochemical and thermal transport, are suitable for energy storage applications as both an active material and current collector. The elimination of inactive components in the slurry-coated electrodes was enabled by LCF processing parameters modifications to produce monolithic mats in which the fibers are electrically interconnected. These mats were several hundreds of micrometers thick, and the fibers functioned as both current collector and active material by virtue of their mixed ionic/electronic conductivities. The LCFs were coated onto copper current collectors with PVDF binder and conductive carbon additive through conventional slurry processing. Galvanostatic cycling of the LCFs against Li revealed reversible capacities greater than 300 mAh/g. The coulombic efficiencies were over 99.8%. The mats were galvanostatically cycled in half cells against Li. Specific capacities as high as 250 mAh/g were achieved approximately 17% lower than the capacities of the same fibers in slurries. However, there were no inactive materials reducing the practical specific capacity of the entire electrode construction. Lithiation and delithiation of the LCFs proceeded with coulombic efficiencies greater than 99.9%, and the capacity retention was greater than 99% over 100 cycles at a rate of 15 mA/g. Research sponsored by the Laboratory Directed Research and Development Program of Oak Ridge National Laboratory, managed by UT-Battelle, LLC, for the U. S. Department of Energy.

McNutt, Nichiolas William↗

Development and Optimization of a Flocculation Procedure for Improved Solid-Liquid Separation of Digested Biomass

One viable treatment method for conversion of lignocellulosic biomass to biofuels begins with saccharification (thermochemical pretreatment and enzymatic hydrolysis), followed by fermentation or catalytic upgrading to fuels such as ethanol, butanol, or other hydrocarbons. The post-hydrolysis slurry is typically 4-8 percent insoluble solids, predominantly consisting of lignin. Suspended solids are known to inhibit fermentation as well as poison catalysts and obstruct flow in catalyst beds. Thus a solid-liquid separation following enzymatic hydrolysis would be highly favorable for process economics, however the material is not easily separated by filtration or gravimetric methods. Use of a polyacrylamide flocculant to bind the suspended particles in a corn stover hydrolyzate slurry into larger flocs (1-2mm diameter) has been found to be extremely helpful in improving separation. Recent and ongoing research on novel pretreatment methods yields hydrolyzate material with diverse characteristics. Therefore, we need a thorough understanding of rapid and successful flocculation design in order to quickly achieve process design goals. In this study potential indicators of flocculation performance were investigated in order to develop a rapid analysis method for flocculation procedure in the context of a novel hydrolyzate material. Flocculation conditions were optimized on flocculant type and loading, pH, and mixing time. Filtration flux of the hydrolyzate slurry was improved 170-fold using a cationic polyacrylamide flocculant with a dosing of approximately 22 mg flocculant/g insoluble solids at an approximate pH of 3. With cake washing, sugar recovery exceeded 90 percent with asymptotic yield at 15 L wash water/kg insoluble solids.

09 BIOMASS FUELS↗

Dense protective coatings, methods for their preparation and coated articles

A method for depositing a protective coating on a complex shaped substrate includes the steps of: (1) dipping a complex shaped substrate into a slurry to form a base coat thereon, the slurry comprising an aqueous solution, at least one refractory metal oxide, and at least one transient fluid additive present in an amount of about 0.1 percent to 10 percent by weight of the slurry; (2) curing the dipped substrate; (3) dipping the substrate into a precursor solution to form a top barrier coat thereon; and (4) heat treating the dipped, cured substrate to form a protective coating.

36 MATERIALS SCIENCE↗

Liquefaction processes and systems and liquefaction process intermediate compositions

Liquefaction processes are provided that can include: providing a biomass slurry solution having a temperature of at least 300.degree. C. at a pressure of at least 2000 psig; cooling the solution to a temperature of less than 150.degree. C.; and depressurizing the solution to release carbon dioxide from the solution and form at least part of a bio-oil foam. Liquefaction processes are also provided that can include: filtering the biomass slurry to remove particulates; and cooling and depressurizing the filtered solution to form the bio-oil foam. Liquefaction systems are provided that can include: a heated biomass slurry reaction zone maintained above 300.degree. C. and at least 2000 psig and in continuous fluid communication with a flash cooling/depressurization zone maintained below 150.degree. C. and between about 125 psig and about atmospheric pressure. Liquefaction systems are also provided that can include a foam/liquid separation system. Liquefaction process intermediate compositions are provided that can include a bio-oil foam phase separated from an aqueous biomass solids solution.

09 BIOMASS FUELS↗

Surface modification agents for lithium batteries

A method includes modifying a surface of an electrode active material including providing a solution or a suspension of a surface modification agent; providing the electrode active material; preparing a slurry of the solution or suspension of the surface modification agent, the electrode active material, a polymeric binder, and a conductive filler; casting the slurry in a metallic current collector; and drying the cast slurry.

25 ENERGY STORAGE↗

Effect of Silica Particle Size of Nuclear Waste-to-Glass Conversion - 17319

The process for converting nuclear waste-to-glass in an electric melter occurs in the cold cap, a crust of reacting solids floating on the glass pool. As the melter feed (a mixture of the nuclear waste and glass forming and modifying additives) heats up in the cold cap, glass-forming reactions ensue, causing the feed matrix to connect, trapping reaction gases to create a foam layer. The foam layer reduces the rate of melting by separating the reacting feed from the melt pool. The size of the silica particle additives in the melter feed affects melt viscosity and, hence, foam stability. To investigate this effect, seven nuclear waste simulant feeds of a high-level waste were batched as slurries and prepared with dissimilar ranges of silica particle size. Each slurry feed was charged into a laboratory-scale melter (LSM) to produce a cold cap and the propensity of feeds to foam was determined by pressing dried feeds into pellets and monitoring the change of pellet volume in response to heating. Two of these slurries were designed to have dissimilar glass viscosities at 1150°C. In the low temperature region of the cold cap, before the melter feed connects, the feeds without fine silica particles behaved similar to the high viscosity feed as their volume contracted while the feed with silica particles no larger than 5 µm reacted like the low viscosity feed. However, the feed volume similarities reversed as the feed connected and expanded through the foam region of the cold cap.

Cold Cap↗

Treated fillers, compositions containing same, and articles prepared therefrom

The present invention includes a process for producing treated filler that includes (a) treating a slurry that includes untreated filler where the untreated filler has not been previously dried, with a treating composition that includes a treating agent, thereby forming a treated filler slurry, and (b) drying the treated filler slurry to produce treated filler. The treating agent can include an unsaturated fatty acid, derivative of an unsaturated fatty acid, or salt thereof. The present invention also is directed to treated filler prepared by the process, as well as rubber compounding compositions and tires including the treated filler.

Votruba-Drzal, Peter Lawrence↗

Method for hydraulically separating carbon and classifying coal combustion ash

A method for selective separation of particles from a particle-containing material includes preparing a slurry of the particle-containing material and a dispersant, passing the slurry through a hydraulic classifier in a first direction, establishing a particle flow in a direction that is different from the first direction, and recovering particles having a mean particle size of about 2-7 μm. The flow of particles defines a cross-current flow relative to the slurry feed direction. The method further includes providing the classifier with an interior divider assembly defining at least one inclined channel. The divider assembly typically includes a plurality of substantially parallel dividers separating the classifier into multiple channels having a substantially equal internal volume. A hydraulic classifier for separating particles having a mean particle size of from about 2-7 μm in accordance with the present method is provided also.

01 COAL, LIGNITE, AND PEAT↗

Surface modification agents for lithium batteries

A method includes modifying a surface of an electrode active material including providing a solution or a suspension of a surface modification agent; providing the electrode active material; preparing a slurry of the solution or suspension of the surface modification agent, the electrode active material, a polymeric binder, and a conductive filler; casting the slurry in a metallic current collector; and drying the cast slurry.

Chen, Zonghai↗

Transition metal hexacyanometallate electrode with water-soluble binder

A method is provided for fabricating a transition metal hexacyanometallate (TMHCM) electrode with a water-soluble binder. The method initially forms an electrode mix slurry comprising TMHCF and a water-soluble binder. The electrode mix slurry is applied to a current collector, and then dehydrated to form an electrode. The electrode mix slurry may additionally comprise a carbon additive such as carbon black, carbon fiber, carbon nanotubes, graphite, or graphene. The electrode is typically formed with TMHCM greater than 50%, by weight, as compared to a combined weight of the TMHCM, carbon additive, and binder. Also provided are a TMHCM electrode made with a water-soluble binder and a battery having a TMHCM cathode that is made with a water-soluble binder.

Wang, Long↗

Bidirectional freeze casting for fabricating lamellar structures

This disclosure provides systems, methods, and apparatus related to freeze casting. In one aspect, a method comprises providing an apparatus. The apparatus comprises a container and a cooling surface. A bottom of the container comprises a wedge. The wedge comprises a first substantially planar surface and a second substantially planar surface with an angle between the first and the second substantially planar surfaces. An interior bottom of the container comprises the second substantially planar surface. The cooling surface is in contact with the first substantially planar surface. A slurry is deposited on the second substantially planar surface, the slurry comprising a plurality of particles in a liquid. The cooling surface is cooled to cool the slurry at a specified cooling rate.

36 MATERIALS SCIENCE↗

Method for separating solids suspended or entrained in a liquid

A method of separating solids from a slurry or suspension is disclosed. The method includes: providing a slurry or suspension containing solids and liquid to an input port of a first side of a filter, the filter providing a filtering size between 2 microns and 70 microns; providing a liquid discharge port on a second side of the filter which receives the liquid that passes through the filter; and separating the solids from the liquid by pressing the solids into a pressure regulating solids discharge port on the first side of the filter, thereby compacting solids on the first side of the filter, forcing at least some of the liquid of the slurry or suspension through the first side of the filter to the second side of the filter causing pressure regulated solids to be discharged through a pressure regulating solids discharge port into a pressurized chamber.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

BETO 2021 Peer Review - Bench Scale Integration WBS 2.4.1.100

Bench Scale Integration develops and optimizes fermentation processes to produce bio-based fuels and chemicals from biomass sugars. The project uses fermentation science to achieve high titers and production rates by, for example, manipulating how the microorganisms are fed biomass sugars and nutrients, modifying fermentation conditions (pH, temperature, aeration) or developing online control strategies that increase production rates. For this period of performance, we conducted small scale fermentation research using strategies mentioned to produce 2,3-butanediol (BDO) from biomass utilizing NREL's proprietary Zymomonas mobilis microorganism. BDO is a versatile chemical which can be catalytically upgraded to a variety of hydrocarbon fuels and chemicals. The 3-yr project goal was to increase BDO titers from 50 g/L (FY17 level) to 125 g/L on biomass sugars by 2020. This is a 150% increase in titer showing the commercial potential of Z. mobilis while reducing the cost to downstream processing. We successfully achieved this target. The project also showed yearly progress improvements to the process design case by using a whole biomass slurry. Future work will focus on procedures for scaling to produce large quantities of BDO broth for separations and upgrading R&D and improve the titer and rates from biomass whole slurry. Our goal is to produce 100 g/L BDO titer from whole slurry at >1000L by 2023 which will meet the technical targets set by our techno-economic analysis.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Apparatus and method for three-dimensional metal printing

An apparatus and device for building an article by additive manufacturing or 3-D printing. The method includes feeding a supply of particulate slurry to and through a nozzle, such as including an integrated pump, to form a plurality of beads and layers of the slurry on a deposition surface, and ultimately forming a desirable article from the layers of deposited material. The liquid phase of the slurry is desirably removed by heat, and the deposited layers can be sintered or otherwise fused as needed.

Klett, James W.↗

Multiphysics Simulation of Supercritical CO2 Gasification for Hydrogen Production

A bench-scale supercritical CO2 gasifier is being considered by the U.S. Department of Energy’s National Energy Technology Laboratory (NETL). A reacting computational fluid dynamics (CFD) model was developed using ANSYS/Fluent in order to investigate the impact of various operating parameters on syngas composition. The model was validated using available data in the literature. Simulations were conducted over a range of coal-slurry loadings, reaction temperatures, system pressures, and oxygen mass flowrates with the goal of optimizing hydrogen production for the considered reactor. The results from the simulations identified a positive correlation between slurry loading and hydrogen production, while reactor temperature and pressure had a limited impact on H2 production at the conditions of interest. Additionally, the simulations indicated that oxygen mass flowrate has less of an impact on hydrogen production at higher slurry loadings.

Prlina, Alexander↗

Methods and systems for liquid separations

Methods and systems for separating liquid components are disclosed. A vessel is provided containing a solids conveyance device. At least a first portion of the vessel acts as an indirect-contact heat exchanger and a second portion of the vessel contains a filter. A process liquid stream, containing a first component and a second component, is passed into the first portion of the vessel. A portion of the second component is frozen and entrained in the first portion of the vessel into the process liquid stream, resulting in a process slurry stream. The process slurry stream is passed into a second portion of the vessel by the solids conveyance device. The process slurry stream is separated into a solid product stream and a primary liquid product stream by passing the primary liquid product stream through the filter and out of the vessel while separately removing the solid product stream out of the vessel.

Baxter, Larry↗