Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SILICATE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

DEEP SILICATE ABSORPTION FEATURES IN COMPTON-THICK ACTIVE GALACTIC NUCLEI PREDOMINANTLY ARISE DUE TO DUST IN THE HOST GALAXY

We explore the origin of mid-infrared (mid-IR) dust extinction in all 20 nearby (z < 0.05) bona fide Compton-thick (N{sub H} > 1.5 Multiplication-Sign 10{sup 24} cm{sup -2}) active galactic nuclei (AGNs) with hard energy (E > 10 keV) X-ray spectral measurements. We accurately measure the silicate absorption features at {lambda} {approx} 9.7 {mu}m in archival low-resolution (R {approx} 57-127) Spitzer Infrared Spectrograph spectroscopy, and show that only a minority ( Almost-Equal-To 45%) of nearby Compton-thick AGNs have strong Si-absorption features (S{sub 9.7} = ln (f{sub int}/f{sub obs}) {approx}> 0.5) which would indicate significant dust attenuation. The majority ( Almost-Equal-To 60%) are star formation dominated (AGN:SB < 0.5) at mid-IR wavelengths and lack the spectral signatures of AGN activity at optical wavelengths, most likely because the AGN emission lines are optically extinguished. Those Compton-thick AGNs hosted in low-inclination-angle galaxies exhibit a narrow range in Si-absorption (S{sub 9.7} {approx} 0-0.3), which is consistent with that predicted by clumpy-torus models. However, on the basis of the IR spectra and additional lines of evidence, we conclude that the dominant contribution to the observed mid-IR dust extinction is dust located in the host galaxy (i.e., due to disturbed morphologies, dust lanes, galaxy inclination angles) and not necessarily a compact obscuring torus surrounding the central engine.

79 ASTRONOMY AND ASTROPHYSICS↗

DESTRUCTION OF MASSIVE FRAGMENTS IN PROTOSTELLAR DISKS AND CRYSTALLINE SILICATE PRODUCTION

We present a mechanism for the crystalline silicate production associated with the formation and subsequent destruction of massive fragments in young protostellar disks. The fragments form in the embedded phase of star formation via disk fragmentation at radial distances {approx}>50-100 AU and anneal small amorphous grains in their interior when the gas temperature exceeds the crystallization threshold of {approx}800 K. We demonstrate that fragments that form in the early embedded phase can be destroyed before they either form solid cores or vaporize dust grains, thus releasing the processed crystalline dust into various radial distances from sub-AU to hundred-AU scales. Two possible mechanisms for the destruction of fragments are the tidal disruption and photoevaporation as fragments migrate radially inward and approach the central star and also dispersal by tidal torques exerted by spiral arms. As a result, most of the crystalline dust concentrates to the disk inner regions and spiral arms, which are the likely sites of fragment destruction.

79 ASTRONOMY AND ASTROPHYSICS↗

SILICATE DUST SIZE DISTRIBUTION FROM HYPERVELOCITY COLLISIONS: IMPLICATIONS FOR DUST PRODUCTION IN DEBRIS DISKS

Fragments generated by high-velocity collisions between solid planetary bodies are one of the main sources of new interplanetary dust particles. However, only limited ranges of collision velocity, ejecta size, and target materials have been studied in previous laboratory experiments, and the collision condition that enables the production of dust-sized particles remains unclear. We conducted hypervelocity impact experiments on silicate rocks at relative velocities of 9 to 61 km s{sup -1}, which is beyond the upper limit of previous laboratory studies. Sub-millimeter-diameter aluminum and gold spheres were accelerated by laser ablation and were shot into dunite and basalt targets. We analyzed the surfaces of aerogel blocks deployed near the targets using an electron probe micro analyzer and counted the number of particles that contained the target material. The size distributions of ejecta ranged from five to tens of microns in diameter. The total cross-sectional area of dust-sized ejecta monotonically increased with the projectile kinetic energy, independent of impact velocity, projectile diameter, and projectile and target material compositions. The slopes of the cumulative ejecta-size distributions ranged from -2 to -5. Most of the slopes were steeper than the -2.5 or -2.7 that is expected for a collisional equilibrium distribution in a collision cascade with mass-independent or mass-dependent catastrophic disruption thresholds, respectively. This suggests that the steep dust size-distribution proposed for the debris disk around HD172555 (an A5V star) could be due to a hypervelocity collision.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

LABORATORY ANALYSIS OF PRESOLAR SILICATE STARDUST FROM A NOVA

We report the major element as well as the oxygen, magnesium, and silicon isotope composition of a unique presolar silicate grain found in the fine-grained fraction of the Antarctic CR2 chondrite Graves Nunataks 95229. The grain is characterized by an extremely high {sup 17}O/{sup 16}O ratio (6.3 {+-} 0.2 Multiplication-Sign 10{sup -3}) relative to solar values, whereas its {sup 18}O/{sup 16}O ratio is solar within measurement uncertainty. It also shows enrichments in {sup 25,26}Mg and a significant excess in {sup 30}Si relative to solar system compositions, with {delta}{sup 25}Mg = 79 {+-} 21 per mille , {delta}{sup 26}Mg = 70 {+-} 20 per mille , and {delta}{sup 30}Si = 379 {+-} 92 per mille . This isotopic composition is consistent with an origin in the ejecta of a {approx}1.3-1.4 M{sub Sun} ONe nova with large contributions of material from a main-sequence companion star of roughly solar metallicity. However, many details of the stellar source remain undetermined, owing to the uncertainties of current nova nucleosynthesis models. Auger electron spectroscopic analyses identify O, Mg, Si, and Fe as the grain's major constituents. Its (Mg+Fe)/Si atomic ratios are lower than that of olivine and correspond on average to Fe-Mg-pyroxene. A complex texture and heterogeneous major element distribution within the grain attest to condensation under non-equilibrium conditions, which is consistent with the proposed nova origin.

79 ASTRONOMY AND ASTROPHYSICS↗

Size Scaling of Tensile Failure Stress in a Soda-Lime-Silicate Float Glass

The (tensile) strength-size scaling of a float soda-lime silicate glass was studied using biaxial flexure and Hertzian ring crack initiation testing. The examined Weibull effective areas spanned ~ 0.4 to 48,000 mm2. Both the air- and tin-sides were tested. The air side was stronger than the tin side as others have observed; however, the differences in their characteristic strengths decreased with decreasing effective area, and their strengths converged for effective areas smaller than ~ 100 mm2. The failure stress at the smallest effective area examined for the tin-side was ~ 500% greater than that at the largest effective area while that difference was ~ 250% for the air- side. A Weibull modulus change at ~ 100 mm2 suggests different strength-limiting flaw types were dominant below and above that effective area. These results reinforce the importance to interpret and use tensile strength of glass in context to how much of its area is being tensile stressed.

36 MATERIALS SCIENCE↗

3D Nanotomography of calcium silicate hydrates by transmission electron microscopy

Calcium silicate hydrate (C-S-H), is the principal hydration product of Portland cement that mainly contributes to the physical and mechanical properties of concrete. This paper aims to investigate the three-dimensional structure of C-S-H with Ca/Si ratios of 1.0 and 1.6 at the nanoscale using electron tomography. The 3D reconstructions and selected region of interest analysis confirm that the morphology of both C-S-H materials are foil-like structures. Additionally, the difference between the two materials is the density of elongated structures. C-S-H with Ca/Si ratio 1.6 is clearly composed of denser particles compared to the other C-S-H material due to overlapping of the foil-like structure. Pore analysis shows that C-S-H 1.0 and C-S-H 1.6 have porosities 69.2% and 49.8% respectively. Pore size distribution also reveals that C-S-H 1.0 has pore size range between 0-250 nm and C-S-H 1.6 between 0-100 nm. The pore network's size of C-S-H 1.0 is significantly larger than 1.6. This study illustrates the capability of using electron tomography to determine the 3D nanoscale structure of cementitious products and to distinguish between C-S-H 1.0 and 1.6.

42 ENGINEERING↗

TOF SIMS analysis and generation of white photoluminescence from strontium silicate codoped with europium and terbium

White light emitting terbium (Tb{sup 3+}) and europium (Eu{sup 3+}) codoped strontium silicate (Sr{sub 2}SiO{sub 4}) phosphors were prepared by a solid state reaction process. The structure, particle morphology, chemical composition, ion distribution, photoluminescence (PL), and decay characteristics of the phosphors were analyzed by x-ray diffraction (XRD), scanning electron microscopy (SEM), time-of-flight secondary ion mass spectrometry (TOF-SIMS), and PL spectroscopy, respectively. The XRD data showed that our Sr{sub 2}SiO{sub 4} composed of two phases, namely, β-Sr{sub 2}SiO{sub 4} and α′-Sr{sub 2}SiO{sub 4}, and the α′-Sr{sub 2}SiO{sub 4} phase was more prominent than the β-Sr{sub 2}SiO{sub 4} phase. The SEM micrographs showed that the particles were agglomerated together and they did not have definite shapes. All ions (i.e., negative and positive) present in our materials were identified by TOF-SIMS. In addition, the chemical imaging performed with the TOF-SIMS demonstrated how the individual ions including the dopants (Eu{sup 3+} and Tb{sup 3+}) were distributed in the host lattice. White photoluminescence was observed when the Sr{sub 2}SiO{sub 4}:Tb{sup 3+}, Eu{sup 3+} phosphor was excited at 239 nm using a monochromatized xenon lamp as the excitation source. The phosphor exhibited fast decay lifetimes implying that it is not a good candidate for long afterglow applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fabrication of Sr silicate buffer layer on Si(100) substrate by pulsed laser deposition using a SrO target

The authors fabricated 2 × 1 Sr-reconstructed Si(100) substrates using thin SrO layers, and used them to direct growth of crystalline perovskite oxide on Si. The SrO layers used to reconstruct the Si(100) substrates were grown by pulsed laser deposition from a SrO single crystal target, followed by postdeposition-annealing (PDA) of the SrO/Si(100) structure. In situ observations of reflective high-energy electron diffraction during PDA confirmed a 2 × 1 reconstruction of the Si surface and x-ray photoemission spectroscopy of the annealed samples confirmed the existence of Sr atoms in a silicate phase, which indicated that a 2 × 1 Sr-reconstructed Si surface was achieved. The optimal fabrication conditions were annealing at 720 °C for 1 min and an equivalent SrO layer thickness (ML{sub eq}) of 2.5 ML{sub eq}. The temperature condition was very narrow, at 720 ± 20 °C, for an acceptable product. Subsequently, the authors demonstrated the growth of crystalline SrTiO{sub 3} films on the 2 × 1 Sr-reconstructed Si(100) surfaces.

36 MATERIALS SCIENCE↗

Hybrid Composite Materials Based on Natural Layered Silicates

We have prepared composite materials based on natural silicates: vermiculite modified with cellulose and nontronite modified with an alkaline rice husk hydrolysate. The materials have been characterized by X-ray diffraction, IR spectroscopy, and positron annihilation spectroscopy, and their specific surface area, sorption capacity (for model dye solutions), and tribological properties have been assessed. It has been shown that cellulose in the vermiculite-based composite material is incorporated between the aluminosilicate layers, forming a new crystalline phase. The nontronite-based composite material reduces the wear of friction pairs by a factor of 2.5 to 7.

36 MATERIALS SCIENCE↗

Crystal Structures of Endotaxic Phases in Europium Potassium Silicate Having a Pellyite Unit Cell

The structures of three phases of the synthesized europium potassium silicate were determined by X-ray diffraction. Two of these phases crystallize in a new structural type. The chemical formulas of the phases were determined. The orthorhombic unit-cell parameters of all three phases are equal: a = 14.852(1) A, b = 15.902(1) A, c = 7.243(1) A, sp. gr. P2{sub 1}2{sub 1}2 (phase I) and sp. gr. Pbam (phases II and III). The structures were solved by direct methods and refined from X-ray diffraction data collected from one crystal to R = 0.0271, 0.0479, and 0.0582 based on 4370, 3320, and 2498 reflections, respectively, with |F| > 3{sigma}(F). The crystal- chemical formulas of the phases (Z = 4) are K{sub 3}Eu{sub 3+}[Si{sub 6}O{sub 15}] . 2H{sub 2}O, K{sub 3}Eu{sup 3+}[Si{sub 6}O{sub 13}(OH){sub 4}] . 2H{sub 2}O, and K{sub 3}Eu{sup 3+}[Si{sub 4}O{sub 9.5}(OH)](OH){sub 2}. 5.5H{sub 2}O. The structure of phase I consists of silicon-oxygen sheets [Si{sub 6}O{sub 15}] analogous to those found in the isostructural compound K{sub 3}Nd[Si{sub 6}O{sub 15}] . 2H{sub 2}O. In the structures of phases II and III, the ribbons [Si{sub 6}O{sub 17}] and [Si{sub 8}O{sub 21}] run along the shortest c axis and are linked together by Eu{sup 3+} octahedra and trigonal prisms to form three-dimensional layered and framework structures containing K atoms between the sheets and in the channels. The fragments are also linked through hydrogen bonds with the participation of OH groups and water molecules.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spectral Properties and Thermal Quenching of Mn{sup 4+} Luminescence in Silicate Garnet Hosts CaY{sub 2}MgMAlSi{sub 2}O{sub 12} (M = Al, Ga, Sc)

Multi-component silicate garnet ceramics CaY{sub 2}MgMAlSi{sub 2}O{sub 12} comprising different cations M = Al, Ga or Sc in octahedral sites doped with Mn{sup 4+} ions have been synthesized and studied as novel red-emitting phosphors aiming at warm white pc-LED applications. All synthesized phosphors exhibit Mn{sup 4+} luminescence in rather deep red region, the shortest-wavelength spectrum of Mn{sup 4+} luminescence (peak wavelength at 668 nm) being obtained for the host with the largest cation M{sup 3+} = Sc{sup 3+} in the octahedral site. The effect of increasing the energy of the emitting Mn{sup 4+2}E level with the size of the host cation in octahedral sites is supposed to be the result of decrease of the covalence of the “Mn{sup 4+}-ligand” bonding with increase of the interionic Mn{sup 4+}–O{sup 2–} distance. All studied phosphors demonstrate rather poor thermal stability of Mn{sup 4+} photoluminescence with a thermal quenching temperature T{sub 1/2} below 200 K, the lowest value being observed for the host with M = Sc. As expected, the decrease of the energy of the O{sup 2–}–Mn{sup 4+} charge-transfer state is observed with the increase of the M{sup 3+} cation radius, i.e. with the increase of the O{sup 2–}–Mn{sup 4+} interionic distance. The thermal quenching temperature of Mn{sup 4+} luminescence in the studied phosphors correlates with the energy of the O{sup 2–}–Mn{sup 4+} charge transfer state which is supposed to serve as a quenching state for Mn{sup 4+} luminescence.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Transformation of meta-stable calcium silicate hydrates to tobermorite: reaction kinetics and molecular structure from XRD and NMR spectroscopy

Understanding the integrity of well-bore systems that are lined with Portland-based cements is critical to the successful storage of sequestered CO 2 in gas and oil reservoirs. As a first step, we investigate reaction rates and mechanistic pathways for cement mineral growth in the absence of CO 2 by coupling water chemistry with XRD and NMR spectroscopic data. We find that semicrystalline calcium (alumino-)silicate hydrate (Al-CSH) forms as a precursor solid to the cement mineral tobermorite. Rate constants for tobermorite growth were found to be k = 0.6 (± 0.1) × 10 -5 s -1 for a solution:solid of 10:1 and 1.6 (± 0.8) × 10 -4 s -1 for a solution:solid of 5:1 (batch mode; T = 150°C). This data indicates that reaction rates for tobermorite growth are faster when the solution volume is reduced by half, suggesting that rates are dependent on solution saturation and that the Gibbs free energy is the reaction driver. However, calculated solution saturation indexes for Al-CSH and tobermorite differ by less than one log unit, which is within the measured uncertainty. Based on this data, we consider both heterogeneous nucleation as the thermodynamic driver and internal restructuring as possible mechanistic pathways for growth. We also use NMR spectroscopy to characterize the site symmetry and bonding environment of Al and Si in a reacted tobermorite sample. We find two [4] Al coordination structures at δ iso = 59.9 ppm and 66.3 ppm with quadrupolar product parameters (P Q ) of 0.21 MHz and 0.10 MHz (± 0.08) from 27 Al 3Q-MAS NMR and speculate on the Al occupancy of framework sites by probing the protonation environment of Al metal centers using 27 Al{ 1 H}CP-MAS NMR.

58 GEOSCIENCES↗

Quaternary ammonium borohydride adsorption in mesoporous silicate MCM-48

Inorganic borohydrides have a high gravimetric hydrogen density but release H2 only under energetically unfavorable conditions. Surface chemistry may help in lowering thermodynamic barriers, but inclusion of inorganic borohydrides in porous silica materials has proved hitherto difficult or impossible. We show that borohydrides with a large organic cation are readily adsorbed inside mesoporous silicates, particularly after surface treatment. Thermal analysis reveals that the decomposition thermodynamics of tetraalkylammonium borohydrides are substantially affected by inclusion in MCM-48. Inelastic neutron scattering (INS) data show that the compounds adsorb on the silica surface. Evidence of pore loading is supplemented by DSC/TGA, XRD, FTIR, and BET isotherm measurements. Mass spectrometry shows significant hydrogen release at lower temperature from adsorbed borohydrides in comparison with the bulk borohydrides. INS data measured for partially decomposed samples indicates that the decomposition of the cation and anion is likely simultaneous. Additionally, these data confirm the formation of Si-H bonds on the silica surface upon decomposition of adsorbed tetramethylammonium borohydride.

36 MATERIALS SCIENCE↗

Bonded Interactions in Silica Polymorphs, Silicates and Siloxane Molecules

Experimental model electron density distributions recorded for the silica polymorphs coesite and stishovite are comparable with electron density distributions calculated for a variety of silicates and siloxane molecules. The Si-O bond lengths and Si-O-Si angles calculated with first principles density functional theory methods as a function of pressure are also comparable with the bond lengths and angles observed for coesite and quartz within the experimental error. The similarity of the topological properties of the Si-O bonded interactions and the experimental and the geometry optimized structures for the silica polymorphs provides a basis for understanding the properties and crystal chemistry in terms of a molecular-based model. The agreement supports the argument that the bulk of the structural, physical and thermodynamic properties of the silica polymorphs are intrinsic properties of the molecular-like coordinated polyhedra such that the silica polymorphs can be pictured as ‘supermolecules’ of silica bound by the virtually same forces that bind the Si and O atoms in simple siloxane molecules. The topology of the electron density distribution is consistent with the assertion that the Si-O bonded interaction arises from the net electrostatic attraction exerted on the nuclei by the electron density accumulated between the Si and O atoms. The correlation between the Si-O bond length and Si-O-Si angle is ascribed to the progressive local concentration of the electron density in the nonbonded region of the O atom as the bond length increases and angle decreases rather then to bonded interactions involving the d-orbitals on Si. On the basis of the proximity of the bond critical point, rc, to the nodal surface of the Laplacian, (nabla) 2 ρ(r c ), and the values of ρ(r c ) and G(r c )/ρ(r c ), the Si-O bond qualifies as an intermediate bonded interaction. For bonded interactions of intermediate character, (nabla) 2 ρ(r c ) increases linearly as ρ(r c ) increases, the greater the shared character, the larger the value of (nabla) 2 ρ(r c ). In addition, a mapping of (nabla) 2 ρ(r) serves to highlight those Lewis base domains that are susceptible to electrophilic attack by H like the O atom in coesite involved in bent Si-O-Si angles, the narrower the angle, the greater the affinity for H . On the basis of the net charges conferred on the Si and O atoms and the bonded radii of the two atoms, the Si-O bond of stishovite with six-coordinated Si and three-coordinated O is indicated to be more ionic in character than that in quartz with four-coordinated Si and two coordinated O. Unlike the conclusion reached for ionic and crystal radii (quantum mechanical unobservables), it is the bonded radius of the O atom that increases with the increasing coordination number of Si, not the radius of the Si atom. The modeling of the electron density distributions for quartz, coesite and beryl as a function of pressure indicates that the shared character of the bonded interactions in these minerals increases slightly with increasing pressure. The insight provided by the calculations and the modeling of the electron density distributions and the structures of the silica polymorphs bodes well for future Earth materials studies that are expected to improve and clarify our understanding of the connection between properties and structure within the framework of quantum mechanical observables, to find new and improved uses and to predict new properties for materials and to enhance our understanding of crystal chemistry and chemical reactions of materials in their natural environment at the atomic level

36 MATERIALS SCIENCE↗

Investigation of Three-Dimensional Microstructure of Tricalcium Silicate (C 3 S) by Electron Microscopy

A serial block-face scanning electron microscopy (SBFSEM) system, composed of a scanning electron microscope (SEM) and an ultra-microtome installed within the SEM vacuum chamber, has been used to characterize the three-dimensional (3D) microstructure of tricalcium silicate (C 3 S) grains embedded in epoxy resin. A selection of C 3 S grains were segmented and rendered with 3D-image processing software, which allowed the C 3 S grains to be clearly visualized and enabled statistically quantitative analysis. The results show that about 5% of the C 3 S grains have volumes larger than 1 μm 3 and the average volume of the grains is 25 μm 3 . Pores can also be clearly seen in the biggest C 3 S grain, the volume of which is 3.6 × 10 4 μm 3 , and the mean volume and total volume of all the pores within this grain are 4.8 μm 3 and 3.0 × 10 3 μm 3 , respectively. This work provides a new approach for the characterization of the 3D spatial structure of raw C 3 S materials, and the resulting 3D structure of the raw C 3 S is important for further systematic research on the relationships between the spatial microstructure and the hydration kinetics of C 3 S and other cement minerals.

36 MATERIALS SCIENCE↗

Three-dimensional characterization of hardened paste of hydrated tricalcium silicate by serial block-face scanning electron microscopy

With the application of a three-dimensional (3D) characterization technique, serial block-face scanning electron microscopy (SBFSEM), the 3D microstructure of a hydrated cement monomineral, tricalcium silicate (C 3 S), was measured with nanoscale resolution. The 3D morphologies of anhydrous particles, hydrated products, and capillary pores were visualized. Closed and open pores were discovered inside an anhydrous particle. The size and distribution of both the anhydrous C 3 S particles and their capillary pores were analyzed quantitatively and the porosity was determined to be 9%. The distribution of pores was found to be in a good agreement with the inner and outer product model of Hu et. al., with an inner shell distance of 860 nm. Here, considering the spatial resolution of the instrument and the volume of sample measured, most pores in this experiment could be characterized as capillary pores.

3D microstructure↗