Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “S MATRIX”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Strengthening of a Polyurethane Matrix by Luffa Cylindrica Treated with TDI: Water Absorption and Mechanical Properties

Luffa Cylindrica (Luffa Aegypitiaca Miller) fibers with their surface modified by mercerization and TDI were used as a reinforcer in a polyurethane matrix. It was possible to confirm the fiber reaction with TDI by XPS and Elemental Analysis. TG, DTG, DSC, X-ray diffraction and SEM show that there is some surface modification after treatment. The mechanical properties of a polyurethane matrix (castor oil/MDI, NCO/OH = 1.0) and of a composite matrix containing 10% of fibers were compared. The composites absorb more water than pure polyurethane as a result of the hydrophilic behavior of natural fibers, but water sorption was smaller for fibers mercerized and treated with TDI. The tensile moduli observed for composites reinforced with untreated and mercerized fibers were similar but increased 35% with the use of mercerized/TDI modified fiber.TDI treatment caused an increase of 50% in maximum load compared to the polymeric matrix.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Insights from the Lattice-Strain Evolution on Deformation Mechanisms in Metallic-Glass-Matrix Composites

In this paper, in situ high-energy synchrotron X-ray diffraction experiments and micromechanics-based finite element simulations have been conducted to examine the lattice-strain evolution in metallic-glass-matrix composites (MGMCs) with dendritic crystalline phases dispersed in the metallic-glass matrix. Significant plastic deformation can be observed prior to failure from the macroscopic stress–strain curves in these MGMCs. The entire lattice-strain evolution curves can be divided into elastic–elastic (denoting deformation behavior of matrix and inclusion, respectively), elastic–plastic, and plastic–plastic stages. Characteristics of these three stages are governed by the constitutive laws of the two phases (modeled by free-volume theory and crystal plasticity) and geometric information (crystalline phase morphology and distribution). The load-partitioning mechanisms have been revealed among various crystalline orientations and between the two phases, as determined by slip strain fields in crystalline phase and by strain localizations in matrix. Finally, implications on ductility enhancement of MGMCs are also discussed.

36 MATERIALS SCIENCE↗

The high matrix acquisition technique for imaging of atherosclerotic plaque inflammation in fluorine-18 fluorodeoxyglucose positron emission tomography/computed tomography with time-of-flight: Phantom study

Background: Motion artifact and partial volume effect caused underestimation of coronary plaque inflammation. This study evaluated the high matrix acquisition technique using time-of-flight (TOF) positron emission tomography/computed tomography for imaging of atherosclerotic plaque inflammation with fluorine-18 fluorodeoxyglucose in small and moving phantoms. Methods and Results: All images were reconstructed using a conventional algorithm without TOF (4 × 4 × 4 mm{sup 3} voxel size) and a high matrix algorithm with TOF (2 × 2 × 2 mm{sup 3} voxel size). Microsphere phantoms of 10, 7.9, 6.2, 5.0, and 4.0 mm diameters were acquired in 3-dimensional list-mode for 30 minutes. A heart phantom mimicking cardiac motion consisted of a hot spot simulating a plaque (φ 4 mm, φ 2 mm) on the outside of the left ventricle. In the microsphere and heart phantom study, visual discrimination, maximum activity, and target-to-background ratio using the high matrix algorithm with TOF were better than those using the conventional algorithm without TOF. Conclusion: The high matrix algorithm with TOF improves detection of small targets in phantoms.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Large-Area Graphene Films as Target Surfaces for Highly Reproducible Matrix-Assisted Laser Desorption Ionization Suitable for Quantitative Mass Spectrometry

Due to the known sweet-spot issues that intrinsically arise from inhomogeneous formation of matrix-analyte crystals utilized as samples in matrix-assisted laser desorption ionization (MALDI) mass spectrometry, its reproducibility and thus its applications for quantification have been somewhat limited. In this paper, we report a simple strategy to improve the uniformity of matrix-analyte crystal spots, which we realized by adapting large-area graphene films, i.e., non-inert, interacting surfaces, as target surfaces. In this example, the graphitic surfaces of the graphene films interact with excess matrix molecules during the sample drying process, which induces spontaneous formation of optically uniform MALDI sample crystal layers on the film surfaces. Further, mass spectrometric imaging reveals that the visible uniformity is indeed accompanied by reproducible MALDI ionization over an entire sample spot, which greatly suppresses the appearance of sweet spots. The results of this study confirm that the proposed method achieves good linear responses of ion intensity to the analyte concentration (R{sup 2} > 0.99) with small relative standard deviations (σ < 10%), which is a range applicable for quantitative measurements using MALDI mass spectrometry. .

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Accelerated modulus-based matrix splitting iteration method for a class of nonlinear complementarity problems

In this paper, we reformulate a class of nonlinear complementarity problems as the implicit fixed-point equations. We demonstrate accelerated modulus-based matrix splitting iteration method. We show their convergence by assuming that the system matrix is positive definite or the splitting of the system matrix are H{sub +}-compatible splitting and discuss the choice of the optimal parameter. Furthermore, we give two-step accelerated modulus-based matrix splitting iteration method, which may achieve higher computing efficiency. Numerical experiments are presented to show the effectiveness of the method.

97 MATHEMATICS AND COMPUTING↗

A deep learning upscaling framework: Reactive transport and mineral precipitation in fracture-matrix systems

Pore-scale modeling has limited applicability at large scales due to its high computational cost. One common approach to upscale pore-scale models is the use of effective medium theories, which homogenize small-scale features in a porous structure and characterize the medium by macroscale properties (e.g., permeability) and equations (e.g., Darcy’s law). However, there are classes of physical processes for which effective medium approximations may become inaccurate, e.g., mineral precipitation and clogging during reactive transport. We have developed a deep learning upscaling framework, in which pore-scale modeling is directly employed in macroscale systems, without relying on effective medium approximations. The upscaling framework is first developed for general multiscale systems and then applied to modeling reactive transport with mineral precipitation in the altered layer in fracture-matrix structures. Solute transport from the fractures to the matrix is modeled as a wall boundary condition for the fractures, which, in turn, is predicted by recurrent neural networks using the concentration histories at the fracture-matrix boundary. Specifically, we consider a meter-scale fracture network embedded in sandstones, where the smallest feature is at the micron scale. Here the proposed framework allows us to span five orders of magnitude in length scales by capturing mineral precipitation in the altered layer of the rock matrix at the pore scale across the entire meter-scale fracture network.

42 ENGINEERING↗

Mice overexpressing latent matrix metalloproteinase-2 develop lung emphysema after short-term exposure to cigarette smoke extract

Highlights: • Protease/anti-protease imbalance is an important event in the pathogenesis of lung emphysema. • Long time exposure to cigarette smoke is generally required to induce mouse model of lung emphysema. • Mice overexpressing matrix metalloproteinase-2 develop lung emphysema after short exposure to cigarette smoke extract. Chronic obstructive pulmonary disease is the major growing cause of mortality and morbidity worldwide, and it is going to become the third most common cause of death by 2020. Chronic obstructive pulmonary disease is pathologically characterized by lung emphysema and small airway inflammation. Animal models are very important to get insights into the disease pathogenesis but current models of chronic obstructive pulmonary disease take a long time to develop. The need of a new model is compelling. In the present study we focus on the role of matrix metalloproteinases in the pathogenesis of chronic obstructive pulmonary disease and hypothesized that lung overexpression of latent matrix metalloproteinases-2 would allow the development of emphysema after short-term exposure to cigarette smoke extract inhalation. Human latent matrix metalloproteinases-2 transgenic mouse expressing high level of the protein in the lungs and wild type mouse were exposed to aerosolized cigarette smoke extract for two weeks. Transgenic mice showed significant lung emphysematous changes, increased infiltration of inflammatory cells and enhanced lung concentrations of inflammatory cytokines in the lungs compared to their wild type counterparts after inhalation of cigarette smoke extract. This novel mouse model will be a very useful tool for evaluating the mechanistic pathways and for development of novel therapies in cigarette smoke-associated lung emphysema.

60 APPLIED LIFE SCIENCES↗

Calculating elements of matrix functions using divided differences

In this work, we introduce a method for calculating individual elements of matrix functions. Our technique makes use of a novel series expansion for the action of matrix functions on basis vectors that is memory efficient even for very large matrices. We showcase our approach by calculating the matrix elements of the exponential of a transverse-field Ising model and evaluating quantum transition amplitudes for large many-body Hamiltonians of sizes up to 2 64 x 2 64 on a single workstation. We also discuss the application of the method to matrix inverses. We relate and compare our method to the state-of-the-art and demonstrate its advantages. We also discuss practical applications of our method.

97 MATHEMATICS AND COMPUTING↗

Free-free matrix-elements for two-photon opacity

Recent opacity measurements have inspired a close study of the two-photon contributions to the opacity of hot plasmas. The absorption and emission of radiation is controlled by dipole matrix-elements of electrons in an atom or ion. This paper describes two independent methods to calculate matrix-elements needed for the two-photon opacity and tests the results by the f-sum rule. The usual f-sum rule is extended to a matrix f-sum that offers a rigorous test for bound-bound, bound-free and free-free transitions. An additional higher-order sum-rule for the two-photon transition amplitudes is described. In this work, we obtain a simple parametric representation of a key plasma density effect on the matrix-elements. The perturbation theory calculation of two-photon cross-sections is compared to an independent method based on the solution of the time-dependent Schroedinger equation for an atom or ion in a high-frequency electromagnetic field. This is described as a high frequency Stark effect or AC Stark effect. Two-photon cross sections calculated with the AC Stark code agree with perturbation theory to within about 5%. In addition to this cross check, the AC Stark code is well suited to evaluating important questions such as the variation of two-photon opacity for different elements.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Achieving ultra-high bearing strength of tungsten nanoribbons in a transforming metal matrix

Nanowires (or nanoribbons) were identified as the most potential structural reinforcements for composites due to their ultrahigh strength, but it is difficult to transcribe their ultrahigh strength into the composite. Here, an in-situ W nanoribbbons-NiTi matrix composite was fabricated by mechanical reduction of a W-NiTi ingot, and the micromechanical deformation behavior was studied by in-situ high energy X-ray diffraction during tensile loading-unloading. It is revealed that the large elastic deformation of the W nanoribbons in a NiTi matrix is dictated by and synchronized with the martensitic transformation of the matrix. The bearing strength of the W nanoribbons, up to 11.6 GPa, was achieved in this composite. A significant load transfer took place from the matrix to the nanoribbons, exhibiting the characters of locality and rapidity. In conclusion, the stress fraction carried by the W nanoribbons with the volume fraction of 3% is up to 45% for the strength of the composite.

36 MATERIALS SCIENCE↗

Multi-material ALE remap with interface sharpening using high-order matrix-free finite element methods

The arbitrary Lagrangian-Eulerian (ALE) technique involves remapping field quantities from a Lagrangian mesh to an optimized mesh in a conservative, accurate and bounds-preserving manner. For methods based on arbitrary order finite elements, as described in a reference, material volume fractions are advected in pseudo-time using flux-corrected transport (FCT) without any form of interface reconstruction. In practice, this can lead to excessive propagation of small volume fractions throughout the domain. In addition, this method requires assembly of a global advection matrix to compute the bounds-preserving low-order FCT solution. In this work, we introduce a new approach for ALE remap using a high-order matrix-free technique which incorporates a flux modification to sharpen material interfaces in a conservative manner. Our approach begins with computing a bounds-preserving low-order solution to the ALE remap equations at the element level. We then compute a sharp interface solution (not guaranteed to be bounds-preserving) which comes from solving an augmented version of the ALE remap equations with a conservative flux modification which acts to sharpen material volume fractions based on their gradients and transport directions. Using the sharp interface solution, we make global corrections to the bounds-preserving solution while maintaining preservation of bounds. By blending with the sharpened solution at the global level we are able to globally conserve mass without hindering the remap pseudo-time step. This new interface-aware ALE remap method is based entirely on partial assembly techniques where globally assembled matrix operators are no longer needed, resulting in a globally matrix-free FCT method for multi-material, multi-field ALE remap with high performance on GPU architectures. We present results of our new remap method on 1D, 2D and 3D benchmarks and describe the algorithmic tailoring for GPU architectures that was developed.

Vargas, Arturo [Lawrence Livermore National Labora↗

Large elastic strains and ductile necking of W nanowires embedded in TiNi matrix

The deformation behaviors of W nanowires embedded in a TiNi matrix were investigated by means of in-situ synchrotron high energy X-ray diffraction (HEXRD) and in-situ transmission electron microscopy (TEM) analysis during tensile deformation. The HEXRD measurement indicated that the W nanowires exhibited an average lattice strain of about 1.50 %, whereas the TEM examination revealed a local elastic strain of about 4.59 % in areas adjacent to the TiNi matrix where stress-induced martensitic transformation occurred. This strain corresponds to a stress of ~15 GPa for the W nanowires. In addition, in areas adjacent to the TiNi matrix where plastic deformation and cracking were generated, the W nanowire showed significant ductile necking with ~80 % reduction in cross-section area. In conclusion, the ductile necking of W nanowire is attributed to the lack of protection from the stress-induced martensitic transformation of the TiNi matrix.

36 MATERIALS SCIENCE↗

Comparative analysis of microstructure and reactive sites for nuclear graphite IG-110 and graphite matrix A3

Nuclear graphite and graphite matrix are both high-purity, fine-grain, graphitized materials designed for use in Fluoride-Salt Cooled High Temperature Reactors (FHRs), High Temperature Gas Cooled Reactors (HTGRs), and Molten Salt Reactors (MSRs). Their ability to chemisorb radioisotopes (such as tritium) and their chemical stability is dependent upon the density of reactive carbon sites (RCS), which varies among grades of graphite and changes with neutron irradiation. While nuclear graphites have been extensively characterized, much less data is available for graphite matrix. The current study performs a comparative analysis of IG-110 nuclear graphite and A3 graphite matrix, by X-ray Diffraction (XRD), Raman, and H 2 uptake at 700 °C with H 2 partial pressure range of 300 Pa and 22 kPa. At 10 kPa, the RCS occupied by H 2 uptake per number of carbon atoms at the edge of a crystallite, H/C edge , is 600(300) appm for IG-110 and 2300(200) appm for A3. Prior empirical studies for nuclear graphite establish a linear relationship between H/C and C edge /C and degree of graphitization. The present study shows that these correlations no longer hold when extrapolating to graphite matrix; the type of defects and the defect density at the crystallite surface are different between IG-110 and A3 due to differences in raw materials and manufacturing method.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4} nanoparticles dispersed in a SiO{sub 2} matrix synthesized by sol-gel processing

(Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4})x/(SiO{sub 2})(100 - x) (x = 5, 20 and 50 wt.%) nanocomposites are synthesized by a sol-gel method using tetraethylorthosilicate (TEOS) and metallic nitrates as precursors, and by further annealing the powders for 1 h at 1273 K. X-ray diffraction (XRD), transmission electron microscopy (TEM), room temperature vibrating sample magnetometry (VSM) and SQUID measurements are employed for structural, morphological and magnetic sample characterization. For all the concentrations analyzed, the powder nanocomposites actually consist of spinel NiZn ferrite nanoparticles, dispersed in an amorphous silica matrix. TEM studies reveal different particle size distributions and particle morphologies for the three ferrite contents. The 20 wt.%-NiZn ferrite samples consist of nearly spherical nanoparticles, of about 8 nm, mainly superparamagnetic, well-dispersed in the amorphous silica matrix, while the 5 wt.%-NiZn ferrite samples exhibit a bimodal particle size distribution (5 and 30 nm) of single-domain nanoparticles embedded in the silica. In the 50 wt.%-NiZn ferrite samples, two particle families are observed: small round superparamagnetic nanoparticles of about 8 nm embedded in the amorphous silica matrix and large, non-spherical, ferrimagnetic ones, forming agglomerates outside the matrix. In all the synthesized samples, thickness fringes are observed inside some of the ferrite nanoparticles in dark field images. This contrast is explained using the theory of electron diffraction in a weak beam dark field (WBDF) condition and considering spherical ferrite nanoparticles. A large range of tailored magnetic properties varying the fraction, dispersion and mean size of the ferrimagnetic NiZn ferrite particles is obtained. Room temperature saturation magnetization values are found in the range 3.0-30.4 Am{sup 2}/kg for the different concentration samples. Coercivity values, between 1.9 and 7.6 mT, are more than 50% higher than those measured in powders of pure stoichiometric NiZn ferrite nanoparticles and somewhat higher than those reported for similar NiZn ferrite/SiO{sub 2} nanocomposites also synthesized by sol-gel processes. A correlation between the nanocomposite microstructure and the observed magnetic properties is established. - Highlights: Black-Right-Pointing-Pointer NiZn ferrite/SiO{sub 2} nanocomposites are successfully synthesized by a sol-gel route. Black-Right-Pointing-Pointer Depending on the NiZn ferrite content single or bimodal size distributions result. Black-Right-Pointing-Pointer Coercivity (1.9-7.6 mT) is 50% higher than in stoichiometric NiZn ferrite powders. Black-Right-Pointing-Pointer Microstructure and magnetic properties are correlated.

36 MATERIALS SCIENCE↗

TEM study of {beta} Prime precipitate interaction mechanisms with dislocations and {beta} Prime interfaces with the aluminium matrix in Al-Mg-Si alloys

The interaction mechanisms between dislocations and semi-coherent, needle-shaped {beta} Prime precipitates in Al-Mg-Si alloys have been studied by High Resolution Transmission Electron Microscopy (HRTEM). Dislocation loops appearing as broad contrast rings around the precipitate cross-sections were identified in the Al matrix. A size dependency of the interaction mechanism was observed; the precipitates were sheared when the longest dimension of their cross-section was shorter than approximately 15 nm, and looped otherwise. A more narrow ring located between the Al matrix and bulk {beta} Prime indicates the presence of a transition interface layer. Together with the bulk {beta} Prime structure, this was further investigated by High Angle Annular Dark Field Scanning TEM (HAADF-STEM). In the bulk {beta} Prime a higher intensity could be correlated with a third of the Si-columns, as predicted from the published structure. The transition layer incorporates Si columns in the same arrangement as in bulk {beta} Prime , although it is structurally distinct from it. The Z-contrast information and arrangement of these Si-columns demonstrate that they are an extension of the Si-network known to structurally connect all the precipitate phases in the Al-Mg-Si(-Cu) system. The width of the interface layer was estimated to about 1 nm. - Highlights: Black-Right-Pointing-Pointer {beta} Prime is found to be looped at sizes larger than 15 nm (cross section diameter). Black-Right-Pointing-Pointer {beta} Prime is found to be sheared at sizes smaller than 15 nm (cross section diameter). Black-Right-Pointing-Pointer The recently determined crystal structure of {beta} Prime is confirmed by HAADF-STEM. Black-Right-Pointing-Pointer Between {beta} Prime and the Al-matrix a transition layer of about 1 nm is existent. Black-Right-Pointing-Pointer The {beta} Prime /matrix layer is structurally distinct from bulk {beta} Prime and the aluminium matrix.

36 MATERIALS SCIENCE↗

Fabrication and characterization of microstructure of stainless steel matrix composites containing up to 25 vol% NbC

AISI 440 stainless steels reinforced with various volume fractions of niobium carbide (NbC) particles of up to 25 vol% were fabricated in-situ using an argon arc furnace and then heat-treated to produce a martensitic matrix. Optical and scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS) and electron back-scatter diffraction (EBSD) techniques were used to analyze the microstructure, phases and composition of these composites. Interestingly, it was found that Chinese-script NbC could nucleate on existing primary NbC particles creating NbC clusters with complex microstructures. Additionally, hardness tests were used to evaluate viability in mining and mineral processing applications. The increase in NbC content resulted in an overall increase in the hardness of the composites while causing a marginal decrease in the amount of Cr in solid solution with the matrix, which could be a concern for corrosion resistance. The latter was due to the fact that the NbC lattice could dissolve a minor amount of Cr. Thermodynamic simulations also attributed this to a slight increase in M{sub 7}C{sub 3} precipitation. Nonetheless, these novel composites show great promise for applications in wear and corrosive environments. - Highlights: •Stainless steels reinforced with NbC particles of up to 25 vol% were fabricated. •NbC was formed in-situ in the steels using an arc melter. •Martensitic transformation of the matrix of each sample was achieved. •NbC reinforcements increased the bulk hardness values of the steels. •Dissolved Cr in the matrix of each sample was sufficient for passivity in theory.

36 MATERIALS SCIENCE↗

Ameliorated mechanical and thermal properties of SiC reinforced Al matrix composites through hybridizing carbon nanotubes

Highlights: • The carbon nanotubes were hybridized into SiC reinforced Al based composites. • Hybridization of CNTs leads to the uniform dispersion of SiC in the Al matrix. • Hybridization of CNTs enhances the strength and ductility of the composites. • CNTs can help to decrease the coefficient of thermal expansion of the composites. - Abstract: By hybridizing carbon nanotubes (CNTs) into SiC reinforced Al matrix composites, a novel composite was fabricated to achieve excellent mechanical properties and low coefficient of thermal expansion simultaneously. The study demonstrated that the CNTs can help to acquire the uniform dispersion of SiC particles in the Al matrix, because of their interaction during ball milling and hot rolling processes. In addition, the results revealed that such design optimizes both the mechanical and thermal properties, due to homogeneous microstructure as well as tight and uniform interfaces induced by the addition of CNTs. Strengthening mechanism and Sideridis's model were used to discuss the effects of the CNTs on the mechanical and thermal properties. This study opens up an unexplored avenue for simultaneous improvement of the mechanical and thermal properties of metal matrix composites.

36 MATERIALS SCIENCE↗

Evaluation of the microstructure and mechanical properties of WC particle reinforced aluminum matrix composites fabricated by friction stir processing

Highlights: • FSP was used for the preparation of aluminum matrix composites reinforced with WC particle. • WC particles were uniformly distributed in the composite. • WC particles refined the grains of aluminum matrix. • WC particles enhanced the hardness and tensile strength, but decreased the ductility. - Abstract: Tungsten carbide (WC) is an attractive reinforcing material for aluminum and its alloys. However, it is technically challenging to fabricate WC particle reinforced aluminum matrix composites (AMCs) with homogeneous distribution of WC particles by liquid state processing techniques because of large density gradient. The present work aim to produce WC particle reinforced aluminum matrix composites (AMCs) through friction stir processing (FSP) and analyze the effect of its volume fraction on the microstructural features and the mechanical behavior of the developed AMCs. Microstructural evaluation was conducted on the cross-sections of the samples by optical microscopy (OM), scanning electron microscopy (SEM) and electron backscattered diffraction (EBSD). Microhardness testing was conducted across the cross-sections of FSPed samples to obtain hardness profiles and tensile test was conducted on as-received Al and FSPed samples. The fabricated AMCs exhibited the homogeneous distribution of WC particle with no obvious particle clustering in the stir zone, irrespective of position and WC particle volume fraction. Excellent WC/Al interfacial bonding was obtained in all FSPed AMCs with obviously refined grains. The average size of WC particles after FSP was slightly reduced with the increased volume fraction. It was also found that increasing the volume fraction of WC particles favored the grain refinement, improved the hardness and strength, but decreased the ductility. This improvement in the hardness and strength was attributed to the grain refinement strengthening and homogeneous distribution of WC particles. The decreased ductility resulted from the introduction of more WC particles. Increasing the volume fraction of WC particles caused the nature of fracture to move towards brittle nature.

36 MATERIALS SCIENCE↗