Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Rotation operations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Integrating matrix formulations for vibrations of rotating beams including the effects of concentrated masses

By expressing partial differential equations of motion in matrix notation, utilizing the integrating matrix as a spatial operator, and applying the boundary conditions, the resulting ordinary differential equations can be cast into standard eigenvalue form upon assumption of the usual time dependence. As originally developed, the technique was limited to beams having continuous mass and stiffness properties along their lengths. Integrating matrix methods are extended to treat the differential equations governing the flap, lag, or axial vibrations of rotating beams having concentrated masses. Inclusion of concentrated masses is shown to lead to the same kind of standard eigenvalue problem as before, but with slightly modified matrices.

Lakin, W. D.↗
NASA NTRS1976

A preliminary in-duct measurement of spinning modes in the inlet of a rotating vehicle

Suppression of noise radiated from a jet engine duct is an important environmental problem. Results are presented for a study aimed at developing and evaluating an experimental method for measuring the complex acoustic pressure field at a plane in the inlet of a fan duct. The theory of modal propagation is outlined and related to the theory of measuring spinning modes in the duct. A spinning mode measurement apparatus is described, and preliminary test results of the modal measurement for several operating speeds are presented. The measurement of spinning modes is successfully carried out in the inlet of a rotating vehicle under conditions representative of an actual jet engine. Data repeatability and problems encountered in the measurement are examined. In particular, it is important to calibrate the probe systems for phase and level. Recommendations for future improvements in the method are made.

Kraft, R. E.↗
NASA NTRS1984

Hover test of a full-scale hingeless helicopter rotor: Aeroelastic stability, performance and loads data

A hover test of a full-scale, hingeless rotor system was conducted in the NASA Ames 40- by 80-foot wind tunnel. The rotor was tested on the Ames rotor test apparatus. Rotor aeroelastic stability, performance, and loads at various rotational speeds and thrust coefficients were investigated. The primary objective was to determine the inplane stability characteristics of the rotor system. Rotor inplane damping data were obtained for operation between 350 and 425 rpm (design speed), and for thurst coefficients between 0.0 and 0.12. The rotor was stable for all conditions tested. At constant rotor rotational speed, a minimum inplane dampling level was obtained at a thrust coefficient approximately = 0.02. At constant rotor lift, a minimum in rotor inplane damping was measured at 400 rpm.

Peterson, R. L.↗
NASA NTRS2023

Static Testing of A Conductively-Cooled, High Temperature Superconducting Rotor for A 1.4 MW Electric Machine in a Thermal Vacuum Chamber

NASA’s high efficiency megawatt motor (HEMM) is a partially superconducting, 1.4 MW electric machine designed for electrified aircraft propulsion. HEMM’s high performance is enabled by a field winding composed of 2nd generation high temperature superconducting (HTS) coils that are designed to operate at temperatures below 62 K. The superconducting rotor is conductively cooled to cryogenic temperatures using a rotating cryocooler embedded inside the machine’s shaft. This paper presents a static test of the full-scale superconducting rotor in a thermal vacuum chamber. The experimental setup is described in detail. Thermal and electromagnetic 3D finite element analyses of the experimental setup are shown along with a comparison of the model results to model results for HEMM. The thermal response during cool down from room temperature is discussed. Electrical measurements are presented for operation at different dc current excitations up to the rated current of the rotor (57.2 A) and temperature limit of the HEMM design (62 K). The results suggest that minor damage to one superconducting coil occurred at 50 A and 61.2 K, causing increased resistance in the system, but that the system could still be stably operated at 57.2 A and 62 K when conductively cooled by a cryocooler.

electrified aircraft propulsion↗
NASA NTRS1969

Replacement of fluid-filter elements without interruption of flow

Gatling-type filter assembly, preloaded with several filter elements enables filter replacement without breaking into the operative fluid system. When the filter element becomes contaminated, a unit inner subassembly is rotated 60 degrees to position a clean filter in the line.

Kotler, R. A.↗
NASA NTRS1971

Preliminary performance of a 4.97-inch radial turbine operating in a Brayton power system with a helium-xenon gas mixture

The performance characteristics of the Brayton-rotating-unit's 4.97-inch radial turbine were investigated with the turbine part of a power conversion system. The following system parameters were varied: turbine inlet temperature from 1200 to 1600 F, compressor inlet temperature from 60 to 120 F, compressor outlet pressure from 20 to 45 psia, and shaft speed from 90-110 percent of rated speed (36000 rpm). The working fluid of the system was a gas mixture of helium-xenon with a nominal molecular weight of 83.8. Test results indicate that changes in system conditions have little effect on the turbine efficiency. At the design turbine inlet temperature of 1600 F and compressor inlet temperature of 80 F, an average turbine efficiency of 91 percent was obtained.

Leroy, M. J., Jr.↗
NASA NTRS1972

Red supergiants and neutrino emission. II.

Investigation of the variation with stellar mass of the ratio of the numbers of blue and red supergiants. Statistical data for supergiants in young open clusters and subgroups of associations are collected to supplement a more restricted list presented earlier. Improved methods are used to identify hydrogen-burning supergiants, as well as faint supergiant remnants of binary mass exchange, and to arrange the bright evolved supergiants in order of their masses. Neither of these two operations requires knowledge of stellar distances or luminosities. Relevant published work on stellar evolution, rotation, mass loss, and duplicity is used to predict upper and lower limits on the blue-to-red ratio. It is concluded that the observed paucity of very massive red supergiants (and of carbon stars) confirms and extends the trend previously observed, and thereby supports the idea of neutrino-induced acceleration of the carbon burning and later phases of evolution; the h and chi Persei association shows the same dependence of the blue-to-red-ratio on stellar mass as do other clusters and associations; and a moderate decrease of the blue-to-red ratio is observed with increasing galactocentric distance in the Galaxy (as in M33) and seems to be due to a relative scarcity of extremely young stars in distant galactic regions.

Stothers, R.↗
NASA NTRS1973

Analysis of a combined refrigerator-generator space power system

Description of a single-shaft and a two-shaft rotating machinery arrangements using neon for application in a combined refrigerator-generator power system for space missions. The arrangements consist of combined assemblies of a power turbine, alternator, compressor, and cry-turbine with a single-stage radial-flow design. A computer program was prepared to study the thermodynamics of the dual system in the evaluation of its cryocooling/electric capacity and appropriate weight. A preliminary analysis showed that a two-shaft arrangement of the power- and refrigeration-loop rotating machinery provided better output capacities than a single-shaft arrangement, without prohibitive operating compromises.

Klann, J. L.↗
NASA NTRS1981

Dispersed solar thermal generation employing parabolic dish-electric transport with field modulated generator systems

This paper discusses the application of field modulated generator systems (FMGS) to dispersed solar-thermal-electric generation from a parabolic dish field with electric transport. Each solar generation unit is rated at 15 kWe and the power generated by an array of such units is electrically collected for insertion into an existing utility grid. Such an approach appears to be most suitable when the heat engine rotational speeds are high (greater than 6000 r/min) and, in particular, if they are operated in the variable speed mode and if utility-grade a.c. is required for direct insertion into the grid without an intermediate electric energy storage and reconversion system. Predictions of overall efficiencies based on conservative efficiency figures for the FMGS are in the range of 25 per cent and should be encouraging to those involved in the development of cost-effective dispersed solar thermal power systems.

Ramakumar, R.↗
NASA NTRS1986

Spiral-Groove Ring Seal for Counterrotating Shafts

Self-lubricating seal tolerates high sliding speeds. Application of self-acting geometry in form of spiral grooves to faces of ring-seal housing maintains thin air film of relatively high stiffness between seal ring and housing, enabling seal to operate in noncontacting mode over entire engine-operating range. Potential application in sealing fan-bleed air between two counter-rotating shafts in advanced gas-turbine engines.

Dirusso, E.↗
NASA NTRS1988

Optical Rotary Joint For Data Transfer

Proposed joint increases bandwidth and reduces errors. Scheme for transferring digital data across rotary joint uses light instead of electrical signals. Optical joint offers greater bandwidth and operates at considerably lower error rate. Concept applied to transfer of highspeed data to rotating antennas or across joints of robots and manipulators in automated manufacturing.

Becker, Fred J.↗
NASA NTRS1987

Integrated optics implementation of a fiber optic rotation sensor - Analysis and development

The Jet Propulsion Laboratory is developing a fiber optic rotation sensor (FORS) for use on the Mariner Mark II series of planetary explorer craft and in other space applications. FORS is a closed-loop phase-nulling device and embodies a number of interesting innovations. Chief among these are the incorporation of the device's couplers, phase modulators, and polarizer on a single lithium niobate (LinbO3) integrate optics chip and a novel means of reading out angular position and rotation rate based on optical beat detection. Various aspects of the FORS design and operation are described and discussed. Particular attention is paid to analyzing errors attributable to polarizer imperfection and the so-called residual Michelson effect.

Bartman, R. K.↗
NASA NTRS1984

Of drops and bubbles - The technology of space processing

It is possible to manipulate a large, molten mass of material, such as a glass, aboard an orbital platform using acoustic fields. Attention is presently given to the problem of bubble removal from such a melt; it is desirable to make small bubbles coalesce into larger ones through floating melt rotation, to create an artificial convective field in which the bubbles will move centripetally to the axis of rotation. Computer models of bubble migration have been developed in order to define the operational conditions required aboard such experiment platforms as the Space Shuttle Orbiter.

Subramanian, R. Shankar↗
NASA NTRS1990

Rubbing Between Rotors And Stators

Report describes experimental and numerical-simulation studies of dynamical effects of rubbing between rotors and stators in turbomachinery. Purpose of study to gain improved understanding of such rubbing phenomena, with view toward: contributing to techniques for diagnosis of rubbing (e.g., via analysis of vibrations); predicting more accurately limiting operating conditions; and improving design criteria to prevent rubbing damage in high-performance rotating machinery.

Muszynska, Agnes↗
NASA NTRS1991

Thermal control surfaces experiment (SOO69) flight systems performance

The thermal control surfaces experiment (TCSE) was the most complex hardware system aboard the Long Duration Exposure Facility (LDEF). The TCSE system consists of a scanning spectroreflectometer that measured test samples mounted on a rotatable carousel assembly. A microprocessor based data system controlled all aspects of TCSE system operation. Power was provided by four primary batteries. Flight measurement and housekeeping data were stored on a tape recorder for postflight analysis. The TCSE is a microcosm of complex electro-optical payloads being developed by NASA, DoD, and the aerospace community. The TCSE provides valuable data on the performance of these systems in space. The TCSE flight system and its excellent performance on the LDEF mission are described. A few operational anomalies were encountered and are discussed. Initial post-flight tests show that the TCSE system remains functional although some degradation in the optical measurements were observed. The results of these tests are also presented.

Wilkes, Donald R.↗
NASA NTRS1991

Aeroacoustics of large wind turbines

This paper reviews published information on aerodynamically generated noise from large horizontal axis wind turbines operated for electric power generation. Methods are presented for predicting both the discrete frequency rotational noise components and the broadband noise components, and results are compared with measurements. Refraction effects that result in the formation of high-frequency shadow zones in the upwind direction and channeling effects for the low frequencies in the downwind direction are illustrated. Special topics such as distributed source effects in prediction and the role of building dynamics in perception are also included.

Hubbard, Harvey H.↗