Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Reliability Specifications”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Numerical Analysis of High-Order Modes in SRF Resonators for Particle Accelerators

Over the past decades, superconducting technology has rapidly evolved towards high accelerating gradients and low surface resistance, making it possible to operate particle accelerators with high average beam currents and large duty factors. However, RF losses due to coherent excitation of the HOM become the limiting factor for these regimes. Unlike the cavity operating mode, which is tuned separately, the HOM parameters can significantly vary from one cavity to another due to finite mechanical tolerances during the manufacturing process. Thus, it is of utmost importance to know the HOM parameter spread in advance in order to predict unexpected cryogenic losses, overheating of beam line components and maintain stable beam dynamics. In this paper, we present a method for generating cavity geometry with an arbitrary spread of mechanical imperfections and numerically evaluating HOM statistics. Knowing the spread of HOM parameters, we calculated the probability of resonant HOM losses in SRF accelerating cavities used in CW beam current machines such as the PIP-II and LCLS-II linacs, as well as for the SRF crab-cavity for the ILC project. Finally, we present experimental results of HOM spectra measurements in hundreds of 1.3 GHz cavities installed in LCLS-II cryomodules. Studying the effects of HOM excitation results in specifications of the SRF cavity and cryomodule and can significantly impact the efficiency and reliability of the machine operation.

Lunin, Andrei [Fermilab] (ORCID:0000000290096792)↗
NASA NTRS1984

Laboratory test results on the High Resolution Spectrograph (HRS) for the Space Telescope (ST)

Some of the laboratory measured performance parameters of the HRS are reported. Then a description is given of three aspects of performance of particular importance to astronomers: (1) the capability of detecting very weak features against a continuum, (2) the capability of producing reliable line profiles, and (3) the capability of assigning accurate wavelengths to spectral features. Specific technical descriptions of the performance of the HRS detectors (Eck and Beaver, this volume), gratings (Bottema et al., this volume), and control and data-handling system (Becker, this volume) are reported separately.

Brandt, J. C.↗
NASA NTRS1985

Topology design and performance analysis of an integrated communication network

A research study on the topology design and performance analysis for the Space Station Information System (SSIS) network is conducted. It is begun with a survey of existing research efforts in network topology design. Then a new approach for topology design is presented. It uses an efficient algorithm to generate candidate network designs (consisting of subsets of the set of all network components) in increasing order of their total costs, and checks each design to see if it forms an acceptable network. This technique gives the true cost-optimal network, and is particularly useful when the network has many constraints and not too many components. The algorithm for generating subsets is described in detail, and various aspects of the overall design procedure are discussed. Two more efficient versions of this algorithm (applicable in specific situations) are also given. Next, two important aspects of network performance analysis: network reliability and message delays are discussed. A new model is introduced to study the reliability of a network with dependent failures. For message delays, a collection of formulas from existing research results is given to compute or estimate the delays of messages in a communication network without making the independence assumption. The design algorithm coded in PASCAL is included as an appendix.

Li, V. O. K.↗
NASA NTRS1990

Design considerations for future planetary space suits

Manned extravehicular activity (EVA) operations will be major mission elements of planned future U.S. space operations. Whether designed for orbital operations or planetary surface exploration, the EVA system must be safe and reliable, and must provide a high degree of performance capabilities. An extravehicular mobility unit (EMU) consisting of a space suit, EVA gloves, and a portable life support system (PLSS) is central to the EVA system. A rugged, highly reliable, mobile, reusable, and easily maintained EVA suit and compact PLSS must meet the specific requirements of the intended mission. Additional requirements imposed by exposure to surface and gravitational environments are the need for lightweight, high-strength materials for fabricating EMUs to prevent astronaut fatigue and the need for dust protection measures and removal techniques to prevent contamination. Also, operational pressure for habitats should be chosen so as to maintain zero-prebreathe conditions while allowing for lower EMU operating pressure.

Kosmo, Joseph J.↗
NASA NTRS1990

High level design proof of a reliable computing platform

The main objectives are: to establish hardware/software platform for ultra-reliable computing; to use fault tolerant computer architecture; to use formal methods to prevent design and implementation errors; and to construct reliability model to quantify reliability estimate. The results show that: ultra-reliable control systems are hard to achieve; simple fault tolerant design is postulated; formal specification of design is constructed; and preliminary correctness proofs are obtained.

Divito, Ben L.↗
NASA NTRS1991

Investigation of air transportation technology at Ohio University, 1990-1991

The status of the Joint University Program is given. Brief synopsis of some areas of research follow. The study of spectrum efficient methods for transmitting weather information to aircraft has resulted in definition of an improved amplitude and phase modulation process which permits reutilization of voice channels for both voice and data. The system is being implemented for testing. Multisensor navigation systems introduce increased flexibility and performance for aviation, at the expense of increased complexity. Insuring a high level of system reliability and integrity requires that faults not only be detected, but also isolated to specific elements, so that the remaining capabilities of the system may be used with confidence. An algorithm was developed. The JUP has served as a vehicle for reporting work accomplished in evoked potential vision tracking experiments to determine the engineering parameters of this input and control method. Application of GPS in an interferometric mode permits accurate measurement of differential motion; aircraft attitude may be determined using GPS only, with multiple antennas.

Lilley, Robert W.↗
NASA NTRS1994

Packet radio data link applications in the NASA Langley Research Center Transport Systems Research Vehicle

An amateur packet radio system operating in the very high frequency (VHF) range has been implemented in the Transport Systems Research Vehicle at the NASA Langley Research Center to provide an economical, bidirectional, real-time, ground-to-air data link. The packet system has been used to support flight research involving air traffic control (ATC), differential global positioning systems (DGPS), and windshear terminal doppler weather radar (TDWR). A data maximum rate of 2400 baud was used. Operational reliability of the packet system has been very good. Also, its versatility permits numerous specific configurations. These features, plus its low cost, have rendered it very satisfactory for support of data link flight experiments that do not require high data transfer rates.

Easley, Wesley C.↗
NASA NTRS2000

Aviation Weather Information Communications Study (AWIN)

This two part study examines the communication requirements to provide weather information in the cockpit as well as public and private communication systems available to address the requirements. Ongoing research projects combined with user needs for weather related information are used to identify and describe potential weather products that address decision support in three time frames: Far-Term Strategic, Near-Term Strategic and Tactical. Data requirements of these future products are identified and quantified. Communications systems and technologies available in the public as well as private sector are analyzed to identify potential solutions. Recommendations for further research identify cost, performance, and safety benefits to justify the investment. The study concludes that not all weather information has the same level of urgency to safety-of-flight and some information is more critical to one category of flight than another. Specific weather products need to be matched with communication systems with appropriate levels of reliability to support the criticality of the information. Available bandwidth for highly critical information should be preserved and dedicated to safety. Meanwhile, systems designed for in-flight-entertainment and other passenger/crew services could be used to support less critical information that is used only for planning and economic decision support.

Ball, J. W.↗
NASA NTRS2001

Deformation and Life Analysis of Composite Flywheel Disk and Multi-disk Systems

In this study an attempt is made to put into perspective the problem of a rotating disk, be it a single disk or a number of concentric disks forming a unit. An analytical model capable of performing an elastic stress analysis for single/multiple, annular/solid, anisotropic/isotropic disk systems, subjected to both pressure surface tractions, body forces (in the form of temperature-changes and rotation fields) and interfacial misfits is derived and discussed. Results of an extensive parametric study are presented to clearly define the key design variables and their associated influence. In general the important parameters were identified as misfit, mean radius, thickness, material property and/or load gradation, and speed; all of which must be simultaneously optimized to achieve the "best" and most reliable design. Also, the important issue of defining proper performance/merit indices (based on the specific stored energy), in the presence of multiaxiality and material anisotropy is addressed. These merit indices are then utilized to discuss the difference between flywheels made from PMC and TMC materials with either an annular or solid geometry. Finally two major aspects of failure analysis, that is the static and cyclic limit (burst) speeds are addressed. In the case of static limit loads, upper, lower, and out-of-plane bounds for disks with constant thickness are presented for both the case of internal pressure loading (as one would see in a hydroburst test) and pure rotation (as in the case of a free spinning disk). The results (interaction diagrams) are displayed graphically in designer friendly format. For the case of fatigue, a representative fatigue/life master curve is illustrated in which the normalized limit speed versus number of applied cycles is given for a cladded TMC disk application.

Arnold, S. M.↗
NASA NTRS1998

Formal Aspects of Human-Automation Interaction

While new versions of automated control systems such as flight guidance systems are introduced at a rapid pace, it is widely recognized that user interaction with these machines is increasingly problematic. One cause for this difficulty that is commonly cited in the literature, is the discrepancy between the machine's behavior and the operator's (e.g., pilot) expectations. This paper discusses a formal approach to the analysis of operator's interaction with complex automated control systems. We focus attention on the issue of interface correctness; that is, on the question whether the display provides adequate information about the machine's configurations (states, modes, and associated parameters) and transitions, so as to enable the operator to successfully perform the specified set of tasks. To perform the analysis several assumptions are made: (1) A complete formal model of the machine's behavior is available (e.g., as a state transition system, or as a hybrid-machine); (2) A specification of operator's tasks is available and can be formally described (e.g., the reliable and predictable transition between activities involved in executing a climb to a new altitude); (3) The pilot is well trained and has a correct 'mental' model of the machine's response-map. By 'comparing' the machine's model with the set of operator's tasks we formally (i.e., mathematically) evaluate two questions: 1) does the machine's output interface (display) enable the operator to determine, unambiguously, what the current configuration (e.g., mode) of the machine is, and 2) does the display enable the operator to determine, unambiguously, what the next configuration of the machine will be, in response to a specified interaction by the operator (e.g., engaging a mode or changing a parameter such as a speed or target altitude). This paper describes a methodology for conducting such an evaluation using examples from automated flight control systems of modem 'glass cockpit' jetliners. Taxonomy of the different types of discrepancies that lead to pilot inability to resolve the current and next configuration of the machine is suggested. Data from incident reports involving 'mode confusion' is used to corroborate these discrepancies. Finally, means for compensating, either by augmenting the display and/or the operator's 'mental model' are briefly mentioned.

Degani, Asaf↗
NASA NTRS2004

Qualification of Laser Diode Arrays for Mercury Laser Altimeter Mission

NASA's requirements for high reliability, high performance satellite laser instruments have driven the investigation of many critical components; specifically, 808 nm laser diode array (LDA) pump devices. The MESSENGER mission is flying the Mercury Laser Altimeter (MLA) which is a diode-pumped Nd:YAG laser instrument designed to map the topography of Mercury. The environment imposed on the instrument by the orbital dynamics places special requirements on the laser diode arrays. In order to limit the radiative heating of the satellite from the surface of Mercury, the satellite is designed to have a highly elliptical orbit. The satellite will heat near perigee and cool near apogee. The laser power is cycled during these orbits so that the laser is on for only 30 minutes (perigee) in a 12 hour orbit. The laser heats 10 C while powered up and cools while powered down. In order to simulate these operational conditions, we designed a test to measure the LDA performance while being temperature and power cycled. Though the mission requirements are specific to NASA and performance requirements are derived from unique operating conditions, the results are general and widely applicable. We present results on the performance of twelve LDAs operating for several hundred million pulses. The arrays are 100 watt, quasi-CW, conductively-cooled, 808 nm devices. Prior to testing, we fully characterize each device to establish a baseline for individual array performance and status. Details of this characterization can be found in reference. Arrays are divided into four groups and subjected to the temperature and power cycling matrix are shown.

Stephen, Mark↗
NASA NTRS2005

Characterization of High-power Quasi-cw Laser Diode Arrays

NASA s requirements for high reliability, high performance satellite laser instruments have driven the investigation of many critical components; specifically, 808 nm laser diode array (LDA) pump devices. Performance and comprehensive characterization data of Quasi-CW, High-power, laser diode arrays is presented.

Stephen, Mark A.↗
NASA NTRS2006

Radiator Development for Oxygen Storage on the Moon

Vision for Exploration includes "use of lunar resources to support sustained human space exploration". In a favorable orbit, dark sky could be a valuable resource. Spitzer Space Telescope dewar shell maintained at 35 K. Lunar orbit is favorable. Design of radiator to specific lunar environment. A large patch of lunar sky is permanently dark. Radiator provides reliable and un-interrupted cooling. Applications include: a) Zero-boil-off cryogen storage; b) Separation of lunar volatiles for resource utilization; c) Purify oxygen for astronauts; and d) Scrub air for habitation.

moon↗
NASA NTRS2006

A Perspective on DSN System Performance Analysis

This paper discusses the performance analysis effort being carried out in the NASA Deep Space Network. The activity involves root cause analysis of failures and assessment of key performance metrics. The root cause analysis helps pinpoint the true cause of observed problems so that proper correction can be effected. The assessment currently focuses on three aspects: (1) data delivery metrics such as Quantity, Quality, Continuity, and Latency; (2) link-performance metrics such as antenna pointing, system noise temperature, Doppler noise, frequency and time synchronization, wide-area-network loading, link-configuration setup time; and (3) reliability, maintainability, availability metrics. The analysis establishes whether the current system is meeting its specifications and if so, how much margin is available. The findings help identify the weak points in the system and direct attention of programmatic investment for performance improvement.

Deep Space Network (DSN)↗
NASA NTRS2006

Characterization of 808-nm Quasi-CW Laser Diode Arrays

This viewgraph presentation reviews a study that aimed at a characterization of the Quasi-CW Laser Diode Arrays. NASA's requirements for high reliability, high performance satellite laser instruments have driven the investigation of many critical components; specifically, 808 nm laser diode array (LDA) pump devices. Performance and comprehensive characterization data of Quasi-CW, High-power, laser diode arrays is presented

Stephen, Mark↗
NASA NTRS2010

Development of a User Interface for a Regression Analysis Software Tool

An easy-to -use user interface was implemented in a highly automated regression analysis tool. The user interface was developed from the start to run on computers that use the Windows, Macintosh, Linux, or UNIX operating system. Many user interface features were specifically designed such that a novice or inexperienced user can apply the regression analysis tool with confidence. Therefore, the user interface s design minimizes interactive input from the user. In addition, reasonable default combinations are assigned to those analysis settings that influence the outcome of the regression analysis. These default combinations will lead to a successful regression analysis result for most experimental data sets. The user interface comes in two versions. The text user interface version is used for the ongoing development of the regression analysis tool. The official release of the regression analysis tool, on the other hand, has a graphical user interface that is more efficient to use. This graphical user interface displays all input file names, output file names, and analysis settings for a specific software application mode on a single screen which makes it easier to generate reliable analysis results and to perform input parameter studies. An object-oriented approach was used for the development of the graphical user interface. This choice keeps future software maintenance costs to a reasonable limit. Examples of both the text user interface and graphical user interface are discussed in order to illustrate the user interface s overall design approach.

Ulbrich, Norbert Manfred↗
NASA NTRS2012

Optical Comb from a Whispering Gallery Mode Resonator for Spectroscopy and Astronomy Instruments Calibration

The most accurate astronomical data is available from space-based observations that are not impeded by the Earth's atmosphere. Such measurements may require spectral samples taken as long as decades apart, with the 1 cm/s velocity precision integrated over a broad wavelength range. This raises the requirements specifically for instruments used in astrophysics research missions -- their stringent wavelength resolution and accuracy must be maintained over years and possibly decades. Therefore, a stable and broadband optical calibration technique compatible with spaceflights becomes essential. The space-based spectroscopic instruments need to be calibrated in situ, which puts forth specific requirements to the calibration sources, mainly concerned with their mass, power consumption, and reliability. A high-precision, high-resolution reference wavelength comb source for astronomical and astrophysics spectroscopic observations has been developed that is deployable in space. The optical comb will be used for wavelength calibrations of spectrographs and will enable Doppler measurements to better than 10 cm/s precision, one hundred times better than the current state-of-the- art.

Strekalov, Dmitry V.↗
NASA NTRS2004

Qualification of Laser Diode Arrays for Mercury Laser Altimeter

NASA's requirements for high reliability, high performance satellite laser instruments have driven the investigation of many critical components; specifically, 808 nm laser diode array (LDA) pump devices. Performance of Quasi-CW, High-power, laser diode arrays under extended use is presented. We report the optical power over several hundred million pulse operation and the effect of power cycling and temperature cycling of the laser diode arrays. Data on the initial characterization of the devices is also presented.

Stephen, Mark↗