Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Reacting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Sub-picosecond Production of Solute Radical Cations in Tetrahydrofuran after Radiolysis

Ultrafast hole transfer from solvent radical cations produced by radiolysis with ~10 ps, 9 MeV electron pulses to solutes was investigated in tetrahydrofuran (THF). Because of rapid fragmentation of initially produced THF +• , solute radical cations are not expected and have not previously been reported. Using 9,9-Dihexyl-2,7-dibromofluorene (Br 2 F) at 5 to 1000 mM, Br 2 F +• was observed with radiation chemical yields up to G = 2.23 / 100 eV absorbed. While more than half of this was the result of direct solute ionization, the results highlight the importance of capture of holes from THF +• prior to solvation and fragmentation. The observed data show a time-resolution limited (15 ps) rise in transient absorption of Br 2 F +• , identical in form to reports of pre-solvated or dry electron capture in water and a few organic liquids, including THF. The results were thus interpreted with a similar formalism, finding C 37 = 1.7 M, the concentration at which 37% of holes escape capture. The yield of solvent hole capture can be accounted for by the formation of solvent holes adjacent to solute molecules reacting faster than they can fragment, however mechanisms such as delocalized holes or rapid hopping may play a role. Finally, low temperature results find over two times more capture, supporting the speculation that if THF +• was longer lived, the yield of capture in under 15 ps would have been at least 2x larger at 1 M Br 2 F, possibly capturing nearly all available holes from the solvent.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2022

Reactions of Atomic Thorium and Uranium Cations with SF 6 Studied by Guided Ion Beam Tandem Mass Spectrometry

The fundamental chemistry of the thorium and uranium fluorides continues to be an area of interest because of the use of thorium and uranium fluoride compounds in nuclear fuel systems. Here, we study the reaction of thorium cations with sulfur hexafluoride for the first time and revisit the reaction of uranium cations with sulfur hexafluoride. By using guided ion beam tandem mass spectrometry, we explore the reaction pathways that become accessible well above thermal energies (E ~ 0.04 eV). Overall, we find that both Th + and U + react very efficiently with SF 6 , approaching the collision limit at both thermal and elevated energies. Here, the primary products observed at low energies include Th 1–3 + , UF 1–4 + , and SF 1–4 + , all of which are formed in barrierless, exothermic processes. SF 5 + was also observed, although the pressure dependence of this channel reveals that SF 5 + forms exothermically through secondary reactions, which the energy dependences suggest result from reactions between ThF 2 + and UF 3 + with SF 6 . At higher energies, both AnF 3 + products are observed to decay to AnF + + F 2 and both SF 4 + and SF 2 + exhibit cross sections with endothermic features. For both systems, the rise in SF 4 + can be attributed to a secondary collision between AnF + with SF 6 on the basis of the pressure dependence of the SF 4 + channel at higher energies and the rise in SF 2 + appears to result from the decomposition of SF 3 + to SF 2 + + F.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Plasma-Assisted Chemical-Looping Combustion: Low-Temperature Methane and Ethylene Oxidation with Nickel Oxide

The chemical reaction network of low-temperature plasma-assisted oxidation of methane (CH 4 ) and ethylene (C 2 H 4 ) with nickel oxide (NiO) was investigated in a heated plasma reactor through time-dependent species measurements by electron-ionization molecular beam mass spectrometry (EI-MBMS). Methane (ethylene) oxidation by NiO was explored in temperature ranges from 300-700 °C (300-500 °C) and 300-800 °C (300-600°C) for the plasma and non-plasma conditions, respectively. Significant enhancement of methane oxidation was observed with plasma between 400 and 500 °C, where no oxidation was observed under non-plasma conditions. For the oxidation of methane at higher temperatures three different oxidation stages were observed: I) a period of complete oxidation, II) a period of incomplete CO oxidation, and III) a period of carbon buildup. For the C 2 H 4 experiments, and unlike the CH 4 experiments, the plasma resulted in a significant amount of new intermediate oxygenated species, such as CH 2 O, CH 3 OH, C 2 H 4 O, and C 2 H 6 O. Carbon deposits were observed under both methane and ethylene conditions and verified by X-ray photoelectron spectroscopy (XPS). ReaxFF simulations were performed for the oxidation of CH 4 and C 2 H 4 in a non-plasma environment. The simulated intermediates and products largely agree with the species measured in the experiments, though the predicted intermediate oxygenated species such as CH 2 O and C 2 H 6 O were not observed in experiments under non-plasma conditions. A reaction pathway analysis for CH 4 and C 2 H 4 reacting with NiO was created based on the observed species from the MBMS spectra, along with ReaxFF simulations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Effect of Linker Structure and Functionalization on Secondary Gas Formation in Metal–Organic Frameworks

Rare-earth terephthalic acid (BDC)-based metal–organic frameworks (MOFs) are promising candidate materials for acid gas separation and adsorption from flue gas streams. However, previous simulations have shown that acid gases (H 2 O, NO 2 , and SO 2 ) react with the hydroxyl on the BDC linkers to form protonated acid gases as a potential degradation mechanism. Herein, gas-phase computational approaches were used to identify the formation energies of these secondary protonated acid gases across multiple BDC linker molecules. Formation energies for secondary protonated acid gases were evaluated using both density functional theory (DFT) and correlated wave function methods for varying BDC–gas reaction mechanisms. Upon validation of DFT to reproduce wave function calculation results, rotated conformational linkers and chemically functionalized BDC linkers with -OH, -NH 2 , and -SH were investigated. Furthermore, the calculations show that the rotational conformation affects the molecule stability. Double-functionalized BDC linkers, where two functional groups are substituted onto BDC, showed varied reaction energies depending on whether the functional groups donate or withdraw electrons from the aromatic system. Based on these results, BDC linker design must balance adsorption performance with degradation via linker dehydrogenation for the design of stable MOFs for acid gas separations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Hydrolysis Reaction Pathways of Thorium Oxide Nanoclusters

Density functional theory benchmarked by correlated molecular orbital theory is used to develop a fundamental and predictive understanding of the interaction of thorium oxide nanoclusters with gas phase water to provide insight into nuclear-waste storage, production of thorium nuclear reactor fuels, and reprocessing of spent fuel. The structures of Th n O 2n (n = 3 – 6) clusters and their interactions with water have been studied at the B3LYP, MP2, and CCSD(T) levels. Hydrolysis is initiated by the formation of Lewis acid-base adducts, with relative H 2 O binding energies (physisorption) ranging from −15 kcal/mol to −22 kcal/mol. The initial H 2 O physisorption energy is ca. −21 kcal/mol regardless of the cluster size and is consistent with the experimentally obtained initial adsorption energy on a thorium dioxide surface. The physisorption enthalpies for additional water molecules can be affected by the presence of terminal groups OH groups generated by proton transfer to a Th-O near the site of adsorption. The hydrolysis products (chemisorption) form either bridging or terminal hydroxides. More exothermic hydrolysis steps were predicted for the formation of terminal hydroxides as compared to the formation of bridging hydroxides. Here, the calculated transition state barriers for transfer of protons from bound water complexes to form the chemisorption products are very low. Overall, water readily reacts with thorium oxide clusters preferring hydroxide products over hydrated complexes. First and second order fits were predicted for the combined physisorption and chemisorption energies for the hydrolysis of thorium oxide clusters. Finally, ionization energies and electron affinities were calculated as were HOMO-LUMO gaps to provide additional insights into the properties of the thorium oxide and hydroxide clusters.

Adsorption↗
DOE OSTI2025

Photochemistry of Hypervalent Iodoazide Derivatives

The photochemical properties and reaction mechanisms of a series of hypervalent iodoazide compounds (R–IN3) were investigated, with substituents (−CH 3 , −H, −CF 3 ) tuning the electronic density of the phenyl ring. With the help of UV irradiation, ultrafast time-resolved spectroscopy, and density functional theory (DFT) calculations, we elucidated the mechanisms of azide radical (N 3 • ) release and its subsequent reactivity. UV–vis spectroscopy reveals that the photoconversion rates follow the trend CH3 > H > CF3, aligning with DFT-calculated ΔG values for ring-opening transitions. Homolytic cleavage of the I–N bond is identified as the dominant pathway for N3• generation upon UV irradiation, occurring within 400 fs. The released azide radicals react with the solvent molecules, while the iodo radical R–I C • fragments undergo a thermodynamically uphill lactone ring-opening (RO) reaction and subsequent hydrogen atom abstraction from the solvent to form carboxylic acids R–I–COOH, as validated by NMR and IR spectroscopy. The study also highlights the role of substituents in influencing reaction kinetics and intermediate stability, with electron-donating groups accelerating the release of the N 3 • species. This work bridges experimental observations with computational predictions, offering a foundation for future advancements in azide-based reactions and materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Activation, Dehydrogenation, and Carbon–Carbon Coupling of Methane by Iridium Cations Studied by Infrared Multiple Photon Dissociation Spectroscopy and Density Functional Theory

Products resulting from the sequential activation of one, two, three, and four methane molecules by atomic iridium cations were characterized by gas-phase infrared multiple photon dissociation spectroscopy and density functional theory (DFT) calculations. Iridium cations were generated using a laser ablation source and reacted with methane in a linear radiofrequency ion trap before mass analysis and spectroscopic interrogation in a Fourier transform ion cyclotron resonance mass spectrometer coupled to the free-electron laser for intracavity experiments (FELICE) beamline. Product ions were irradiated using infrared light over the 250–1500 cm –1 range. Comparisons between the experimental and DFT-calculated spectra enabled structural determination of the products formed. The observed products include HIrCH + , Ir(CH 2 ) 2 + , H s Ir(C 3 H 5 ) + , and Ir(CH 3 ) s (C 3 H 5 ) + , where the subscript s denotes a syn orientation of the two ligands. Furthermore, formation of the latter two products provides evidence for efficient C–H bond activation and subsequent C–C coupling on the atomic iridium cation.

Chemical reactions↗
DOE OSTI2020

Evolution of Radicals from the Photolysis of High Ionic Strength Alkaline Nitrite Solutions

Reactive nitrogen species (RNS), along with reactive oxygen species (ROS), are significant products from radiolysis in solution. While much research has been focused on biological systems, these species are also important products in the autoradiolysis that occurs in nuclear waste. In this work, we determine the correlation between solution constituents, particularly nitrite, and radical products in highly alkaline solutions relevant to liquid waste. Because these radicals tend to be very short-lived, we employ spin trapping in conjunction with electron paramagnetic resonance (EPR) to detect them and quantify their production. Most spin traps do not function in these conditions (>1 M NaOH); however, nitroalkanes such as nitromethane will act as spin traps in their aci form, which is dominant at high pH. To restrict the products to those originating from nitrite, we use 280–480 nm UV light to generate radicals, avoiding products from the photolysis of water. Under these circumstances, nitric oxide, nitrite radicals, and hydroxyl radicals are detected, and the trends with the concentration of the constituents of the solutions are tracked. These include nitrite, nitrate, hydroxide, and carbonate. We find that, while the equilibrium shifts with increasing pH from hydroxyl radicals to the more slowly reacting oxide radicals, the production of nitrite radicals does not decrease.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Elucidating the Mechanism for the Reaction of $o$-Phthalaldehyde with Primary Amines in the Presence of Thiols

The use of o-phthalaldehyde (OPA) in combination with a thiol reagent is a common method for detecting primary amines in amino acids, peptides, and proteins. Despite its widespread use, the exact reaction mechanism has been debated since the 1980s. Here, we measure the kinetics of the reaction between OPA, alanine, and a dithiol (1,4-dithiolthreitol, DTT) as a function of pH and reagent concentration. Using these new measurements and accompanying kinetic models, we find evidence that the pH dependence of the kinetics arises from both the protonation states of alanine and DTT, the hydration state of OPA, and the unproductive equilibrium with DTT, all of which are pH-dependent. Importantly, these results support the mechanism originally proposed by Sternson [Rational design and evaluation of improved o-phthalaldehyde-like fluorogenic reagents. Anal. Biochem. 1985, 144, 233–246] and Wong [Reaction of o-phthalaldehyde with alanine and thiols: kinetics and mechanism. J. Am. Chem. Soc. 1985, 107, 6421–6422], in which the primary amine first reacts with OPA, followed by a reaction with the thiol to form the fluorescent isoindole product.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Exploring the Unusual Reactivity of the Hydrated Electron with CO 2

Many questions remain about the reactions of the hydrated electron despite decades of study. Of particular note is the fact that they do not appear to follow the Marcus theory of electron transfer reactions, a feature that has yet to be explained. To investigate these issues, we use ab initio molecular dynamics (AIMD) simulations to investigate a one of the better studied reactions, the hydrated electron reduction of CO 2 . The rate constant for the hydrated electron-CO 2 reaction complex to react to form CO 2 - is, for the first time, estimated from AIMD simulations. Results at 298 and 373 K show the rate constant is insensitive to temperature, consistent with the low measured activation energy for the reaction, and the implications of this behavior are examined. The sampling provided by the simulations yields insight into the reaction mechanism. The reaction is found to involve both solvent reorganization and changes in the carbon dioxide structure. The latter lead to significant vibrational excitation of the bending and symmetric stretch vibrations in the CO 2 - product, indicating the reaction is vibrationally nonadiabatic. The former is estimated from calculation of an approximate collective solvent coordinate and the free energy in this coordinate is determined. Furthermore, these results indicate that AIMD simulations can reasonably estimate hydrated electron reaction activation energies and provide new insight into the mechanism that can help illuminate the features of this unusual chemistry.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2026

Chlorine Gas as a Lewis Acid–Base Probe for Molten Salts of Divalent Metal Ions

In the context of energy applications for salts and, more specifically, in the case of molten salt reactors, the solvation of corrosion species, the nature and behavior of radiation-produced excess electrons, transient radicals, and molecular gas species all depend on the Lewis acid–base behavior of the constituent salt melt. Speciation of dissolved species and their transport properties are also influenced by the ability of the melt to form networks. This article focuses on the structural properties of melts composed of alkaline earth metal ions coupled with the Cl – anion, and the quantum mechanical behavior of Cl 2 , a typical product of the reaction of radiation-produced chlorine radicals in Cl – -based molten salts. We explore the effect of M 2+ Lewis acidity on chlorobasicity, seen in this work as the availability of Cl – ions to chemically react with Cl 2 to produce Cl 3 – .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Different Kinetic Reactivities of Electrons in Distinct TiO 2 Nanoparticle Trap States

Electrons added to TiO 2 and other semiconductors often occupy trap states, whose reactivity can determine the catalytic and stoichiometric chemistry of the material. We previously showed that reduced aqueous colloidal TiO 2 nanoparticles have two distinct classes of thermally equilibrated trapped electrons, termed Red/e – and Blue/e – . Presented here are parallel optical and electron paramagnetic resonance (EPR) kinetic studies of the reactivity of these electrons with solution-based oxidants. Optical stopped-flow measurements monitoring the reactions of TiO 2 /e – with substoichiometric oxidants showed a surprising pattern: an initial fast (seconds) decrease in TiO 2 /e – absorbance followed by a secondary, slow (minutes) increase in the broad TiO 2 /e – optical feature. The analysis revealed that the fast decrease is due to the preferential oxidation of the Red/e – trap states and the slow increase results from the re-equilibration of electrons from Blue/e - to Red/e - states. This kinetic model was confirmed by freeze-quench EPR measurements. Quantitative analysis of the kinetic data demonstrated that Red/e – react ~5 times faster than Blue/e – with the nitroxyl radical oxidant 4-methoxy-2,2,6,6-tetramethyl-1-piperidinyloxyl (4-MeO-TEMPO). Similar reactivity patterns were also observed in oxidations of TiO 2 /e – by O 2 , which like 4-MeO-TEMPO is a proton-coupled electron transfer (PCET) oxidant, and by the pure electron transfer (ET) oxidant potassium triiodide (KI 3 ). Furthermore, this suggests that the faster intrinsic reactivity of one trap state over another on the seconds–minutes time scale is likely a general feature of reduced TiO 2 reactivity. This differential trap-state reactivity is likely to influence the performance of TiO 2 in photochemical/electrochemical devices, and it suggests an opportunity for tuning catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Vectorial Charge Transfer across Bipolar Membrane Loaded with CdS and Au Nanoparticles

Bipolar membranes (BPMs) which consist of a cation exchange layer (CEL) and anion exchange layer (AEL) are quite effective as membranes in gas phase electrolyzers. However, such membranes can also serve as a host to embed photocatalysts and electrocatalysts. By selectively exchanging cations with Cd 2+ and anions with AuCl 4 – , we were able to synthesize CdS and Au nanoparticles in CEL and AEL layers, respectively, through sequential chemical and photocatalytic reactions. Reacting Cd 2+ with thioacetamide formed the CdS nanoparticles in CEL. The photogenerated electrons from CdS were then used to reduce AuCl4– in an H-cell configuration to produce Au nanoparticles in AEL and thus prepare a photocatalytically active BPM film (referred to as a CdS/BPM/Au film). Such a concerted design of BPM allows “vectorial” electron transfer between two layers of BPM leading to its transfer to an acceptor molecule (methyl viologen) in solution. Designing photocatalytically active BPM and understanding the vectorial electron flow between two separate ion-selective layers offer new opportunities in water splitting and CO 2 reduction.

13 HYDRO ENERGY↗
DOE OSTI2021

Variable Laser Ignition Pathways in Al/Pt Reactive Multilayers across 10 Decades of Pulse Duration

Pulsed laser irradiation is used to investigate the local initiation of rapid, self-propagating formation reactions in Al/Pt multilayers. The single pulse direct laser ignition of these 1.6 μm thick freestanding foils was characterized over 10 decades of pulse duration (10 ms to 150 fs). Finite element, reactive heat transport modeling of the near-threshold conditions has identified three distinct ignition pathways. For milli- to microsecond pulses, ignition occurs following sufficient absorption of laser energy to enable diffusion of Al and Pt between layers such that the heat released from the corresponding exothermic reaction overcomes conductive losses outside the laser-irradiated zone. When pulse duration is decreased into the nanosecond regime, heat is concentrated near the surface such that the Al locally melts, and a portion of the top-most bilayers react initially. The favorable kinetics and additional heat enable ignition. Further reducing pulse duration to hundreds of femtoseconds leads to a third ignition pathway. In this work, while much of the energy from these pulses is lost to ablation, the remaining heat beneath the crater can be sufficiently concentrated to drive a transverse self-propagating reaction, wherein the heat released from mixing at each interface occurs under kinetic conditions capable of igniting the subsequent layer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Computational Investigation of the Catalytic Hydrodeoxygenation of Propanoic Acid over a Cu(111) Surface

Cu-based alloy catalysts have recently been investigated experimentally for the hydrodeoxygenation (HDO) of biomass-derived organic acids. Here, the HDO of propanoic acid (PAc) has been studied over Cu(111) by mean-field microkinetic modeling based on parameters obtained from first-principles calculations. Models were developed for the gas- and liquid-phase HDO in condensed water and 1,4-dioxane. In agreement with experimental observations, the gas-phase PAc conversion rate is low at 573 K and increases in liquid water by 1 order of magnitude. In all reaction environments, the decarboxylation mechanism is dominant at low hydrogen partial pressures less than 0.1 bar, and the C–COO bond dissociation is the rate-controlling elementary step. This observation contrasts with the rate-controlling step identified over most group VIII metal surfaces, which is the C–OH bond dissociation in the decarbonylation mechanism. At high hydrogen (H 2 ) partial pressures greater than 10 bar, the HDO of PAc produces propionaldehyde that can readsorb and further react through decarbonylation to produce C 2 alkane products, which is conceptually different from the low H 2 partial pressure scenario. At high H 2 partial pressures, the initial hydrogenation at the carbonyl carbon of PAc becomes the rate-controlling elementary step.

Catalysts↗
DOE OSTI2021

Electrocatalytic Reduction of CO 2 to CO over Ag(110) and Cu(211) Modeled by Grand-Canonical Density Functional Theory

We report the results of modeling CO 2 reduction (CO 2 R) to CO over Ag(110) and Cu(211) surfaces at different applied potentials using grand-canonical density functional theory (GC-DFT), a method specifically designed to accurately model electrochemical systems. In addition to demonstrating GC-DFT’s ability to accurately model electrochemical processes, we also compare it with the computational hydrogen electrode (CHE) approach. GC-DFT predicts that the geometries of these reacting systems strongly depend on the applied potential and the Helmholtz free energies vary nonlinearly with the applied potential, which contradicts a central assumption of the CHE approach. The CHE approach neglects the change in the number of electrons on the electrode surface at different applied potentials, which reduces its accuracy as the potential changes from the potential of zero charge. Our results further demonstrate that the grand free energies of the reaction intermediates not only depend on the value of the applied potential but also on the metal surface type, adsorption site, and adsorbate. GC-DFT’s ability to predict the effect of the applied potential on adsorbate geometry enables it to evaluate different possible reaction mechanisms at different applied potentials. For instance, GC-DFT predicts that the first step of CO2R likely switches from proton-coupled electron transfer to sequential electron transfer and then proton transfer at more reducing potentials, a result that cannot be determined by the CHE because it assumes that all electron transfers are coupled to proton transfers and neglects the effect of the applied potential on the adsorbate geometry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Electron Transfer Going the Distance: Mn-Doped ZnSe as a Model Photocatalytic System

In this work, time-resolved photoluminescence and transient absorption spectroscopy are used to examine the influence that long excited state lifetimes of Mn-doped nanocrystals have on the mechanisms of photo-induced electron transfer (PET) in photocatalytic systems. Mn-doped ZnSe nanocrystals can undergo PET over their nearly millisecond excited state lifetime, which enables electron transfer to viologens in solution over large encounter distances in comparison to molecular length scales. The long excited state lifetimes also enable diffusion of the excited nanocrystals over hundreds of nanometers in solution, allowing them to react with molecular species at nanomolar concentrations. The ability to capture and sustain optical energy in spin-forbidden transitions among crystal field states of the Mn ions opens opportunities to explore the influence that long excited state lifetimes have on photocatalytic reaction mechanisms involving molecular species such as CO 2 that can be difficult to concentrate or attach to nanocrystal surfaces.

14 SOLAR ENERGY↗
DOE OSTI2022

Volatile Products of the Autoxidation of Poly(ethylenimine) in CO 2 Sorbents

Poly(ethyleneimine) (PEI)-based CO 2 sorbents are a promising material class for use in CO 2 capture applications, particularly direct air capture (DAC), due to their high amine content and CO 2 capacities. The sorbent lifetime is a key uncertainty in the deployment of these materials in such applications, as they oxidize under conditions relevant to candidate DAC process cycles. Here, in this study, we utilize thermogravimetric analysis/differential scanning calorimetry/FTIR spectroscopy to characterize the nature, rate, and quantity of volatile species formed from the oxidation of PEI when supported on mesoporous Al 2 O 3 . We show that NH 3 , CO 2 , and H 2 O are primary volatile species formed from PEI oxidation and that their production rate matches the overall oxidation rate as measured via heat flow from a differential scanning calorimeter. We show that the total quantity of NH 3 evolved is consistent with terminal primary amines being cleaved from the polymer chain and that approximately one hydrogen atom per PEI repeat unit reacts to form H 2 O during the reaction. Finally, metadynamics and quantum chemical simulations performed on a simplified system are used to highlight the likely importance of radicals in the elementary reactions that comprise the oxidation reaction set. The findings here represent the first characterization of the volatile products from the oxidation of PEI in CO 2 sorbents and lead to a greater understanding of the mechanisms behind the oxidative degradation of these materials.

36 MATERIALS SCIENCE↗