Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ROCKS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Remote sensing of some sedimentary rocks.

Sedimentary rocks including varying sized clastics and carbonates were overflown by aircraft between 1966 and 1971 producing data in the ultraviolet to microwave regions of the electromagnetic spectrum. This paper reports that multispectral analysis increases the ease and rapidity of discrimination of rock types having subtle differences in physical characteristics, but fails to enhance and may degrade distinctions where physical characteristics are significantly different. Brief resumes of color and color IR photographic data are presented. Thermal infrared is found to be useful in the mapping of rock units, but limitations such as moisture variation, soil cover, and vegetation may exceed in one formation the distinction between differing lithologies. A brief review of previously published SLAR data is included for completeness. Remote sensing techniques should reduce field geological effort by as much as 50%.

Brennan, P. A.↗

Fungal leaching of titanium from rock.

Penicillium simplicissimum is found to solubilize up to 80% of the titanium in granitic rocks but less than 2% of the titanium in basaltic rocks. These findings were made in investigating the interactions of microorganisms with rocks and minerals of the biosphere in studies aimed at developing experiments for the detection of extraterrestrial life.

Silverman, M. P.↗

Impact breccias in carbonate rocks, Sierra Madera, Texas.

Two main types of deformational breccia occur in the Sierra Madera cryptoexplosion structure: monolithologic breccias composed of shattered rock of a single lithology and mixed breccias composed of rocks of several lithologies. Monolithologic breccias generally show no mineralogic signs of shock deformation, but a few samples are shatter-coned in a manner suggesting simultaneous formation of breccias and shatter cones. Mixed breccias, forming irregular, cross-cutting bodies, consistently contain moderately to highly shocked material, with mineralogic evidence of shock pressures of 50 kb to more than 200 kb, which, with evidence from the structural geometry of Sierra Madera and orientation of shatter cones, indicate an impact origin of the breccias. The mode of occurrence of the breccias, petrographic characteristics, and association with shock features are shared by breccias in many other cryptoexplosion structures in both carbonate and crystalline rock terranes, suggesting that such breccias have a common origin.

Wilshire, H. G.↗

Major and trace element abundances in volcanic rocks of orogenic areas.

The composition of recent island-arc volcanic rocks in relation to their geographic and stratigraphic relations is discussed. The differences in composition between volcanic rocks and those in continental margins are pointed out. Trace elements and major elements are shown to suggest a continuous gradational sequence from tholeiites through calc-alkaline rocks to shoshonites.

Jakes, P.↗

Rare gas studies of the galactic cosmic ray irradiation history of lunar rocks.

Average irradiation depths and exposure ages of Tranquillity Base rocks are computed on the basis of eight analyses of the five noble gases in whole rock samples and lunar separates from lunar rocks, in conjunction with available literature data. Correlated variations in He-3/Ne-21 and Ar-38/Ne-21 reflect shielding differences. This correlation cannot be explained by diffusion losses, even though evidence for gas loss is obtained from mineral separate data. A qualitative shielding sequence is constructed which agrees reasonably well with the sequence based on Gd isotopic data.

Huneke, J. C.↗

Chromian spinels from Apollo 14 rocks.

Results of electron microprobe analysis of 13 pink, isotropic, high-relief grains from Apollo 14 elastic rock 14063,14 and a lithic fragment from the 1 to 2 mm fines, 14002,7, identifying them as spinel minerals dominated by the spinel component MgAl2O4 associated with a moderate content of chromite and hercynite. The spinel is thought to have crystallized from a magma high in aluminum and low in iron, with possible crystal separation, followed by incorporation in clastic rocks by impacts. Many bulk compositions of the elastic fragments fall near the field of primary spinel in the model system An-Fo-SiO2. Experimental syntheses of Apollo 14 rocks are needed to test the suggested primary origin.

Steele, I. M.↗

Spectral compositional imaging of silicate rocks.

A technique is presented for the broad-scale mapping of gross compositional differences in silicate rocks from three medium-width (2 to 3 microns) spectral channels of thermal infrared scanner data. Ratios of radiances in two of the channels as measured by a two-element Hg:Cd:Te detector from an altitude of 1000 meters are calculated for 25 silicate rocks. The ratios are shown to be nearly linearly correlated with the position of the centers of gravity of the reststrahlen spectral emissivity features, as measured in the laboratory. Further, the ratios are shown to be generally correlated with SiO2 content of silicate rocks. A third channel is proposed for correction of temperature variations across the scene.

Vincent, R. K.↗

Distinguishing major lithologic types in rocks of precambrian age in central Wyoming using multilevel sensing, with a chapter on possible economic significance of iron formation discovered by use of aircraft images in the Granite Mountains of Wyoming

The author has identified the following significant results. Information obtained by remote sensing from three altitude levels: ERTS-1 (565 miles), U-2 (60,000 feet), and C-130 aircraft (15,000 feet) illustrates the possible application of multilevel sensing in mineral exploration. Distinction can be made between rocks of greenstone belts and rocks of granite-granite gneiss areas by using ERTS-1 imagery in portions of the Precambrian of central Wyoming. Study of low altitude color and color infrared photographs of the mafic terrain revealed the presence of metasedimentary rocks with distinct layers that were interpreted as amphibolite by photogeologic techniques. Some of the amphibolite layers were found to be iron formation when examined in the field. To our knowledge this occurrence of iron formation has not been previously reported in the literature.

Houston, R. S.↗

Elastic properties of Apollo 14 and 15 rocks.

Ultrasonic P- and S-wave velocities of lunar samples 14310,72 and 15418,43 and P-wave velocities of sample 15015,18 were measured at room temperature to 5 kb confining pressure. The velocities of both igneous and breccia samples increased sharply over this pressure range. At low confining pressures, the shape of velocity-pressure curves of rocks is determined by the distribution function of crack aspect ratios. We suggest that analogue studies on terrestrial rocks having a wide assortment of crack parameters may be used to infer the nature of cracks in lunar rocks.

Todd, T.↗

Effects of atmospheric moisture on rock resistivity.

This study examines the changes in resistivity of rock samples as induced by atmospheric moisture. Experiments were performed on samples of hematitic sandstone, pyrite, and galena. The sandstone underwent a change in resistivity of four orders of magnitude when it was measured in a vacuum of 500 ntorr and in air of 37% relative humidity. Pyrite and galena showed no variations in resistivity when they were measured under the same conditions. These results, plus others obtained elsewhere, indicate that rocks of the resistive type are affected in their electrical properties by atmospheric moisture, whereas rocks of the conductive type are not. The experimental evidence obtained is difficult to reconcile with a model of aqueous electrolytic conduction on the sample surface. It is instead suggested that adsorbed water molecules alter the surface resistivity in a manner similar to that observed in semiconductors and insulators.

Alvarez, R.↗

Elasticity of water-saturated rocks as a function of temperature and pressure.

Compressional and shear wave velocities of water-saturated rocks were measured as a function of both pressure and temperature near the melting point of ice to confining pressure of 2 kb. The pore pressure was kept at about 1 bar before the water froze. The presence of a liquid phase (rather than ice) in microcracks of about 0.3% porosity affected the compressional wave velocity by about 5% and the shear wave velocity by about 10%. The calculated effective bulk modulus of the rocks changes rapidly over a narrow range of temperature near the melting point of ice, but the effective shear modulus changes gradually over a wider range of temperature. This phenomenon, termed elastic anomaly, is attributed to the existence of liquid on the boundary between rock and ice due to local stresses and anomalous melting of ice under pressure.

Takeuchi, S.↗

Darkening of silicate rock powders by solar wind sputtering.

Hydrogen ion irradiation of powdered igneous rocks, including Apollo rocks, has been observed in the laboratory to darken the powders and to make their optical properties similar to the moon's. An extensive series of investigations shows that this darkening is not spurious. These results are consistent with those of other investigators, including Nash (1967). Darkening of lunar igneous rock powders by the formation of solar wind-sputtered glass films is a real process which occurs on the moon. The time scale for darkening of undisturbed lunar soil is of the order of 50,000-100,000 yr. Comparison of the rates of the formation of glasses on the lunar surface by solar wind sputter-deposition, meteorite impact melting, and impact vaporization-deposition indicates that these processes are of comparable importance under the present flux of meteorites.

Hapke, B.↗

Seismic properties of fine rock powders in lunar conditions.

Seismic properties of fine rock powders in near lunar surface conditions have been measured in the laboratory, and they correspond well with those obtained for the near lunar surface. The laboratory values of Q range from 40 to 330 with corresponding wave velocities below 100 m/sec. Many of the results obtained are shown to be understandable in terms of current theories of the elastic and plastic properties of fine rock powders in a variety of temperature and pressure conditions. This enables some estimate to be made of the changes in Q and wave velocity with depth in the moon, on the supposition that fine rock powder continues downward as an abundant constituent.

Jones, B. W.↗

Lunar rocks as meteoroid detectors

About 5000 microcraters on seven lunar rocks recovered during the Apollo 12 mission have been systematically studied using a stereomicroscope. Based on comparisons with laboratory cratering experiments, at least 95 percent of all millimeter sized craters observed were formed by impacts in which the impact velocity exceeded 10 km/s. The dynamics of particle motion near the moon and the distribution of microcraters on the rocks require an extralunar origin for these impacting particles. The microcrater population on at least one side of all rocks studied was in equilibrium for millimeter sized craters; i.e., statistically, craters a few millimeters in diameter and smaller were being removed by the superposition of new craters at the same rate new craters were being formed. The population of craters on such a surface is directly related to the total population of particles impacting that surface. Crater size distribution data together with an experimentally determined relationship between the crater size and the physical parameters of the impacting particle, yield the mass distribution of interplanetary dust at 1 AU.

Hartung, J. B.↗

Vitrification darkening of rock powders - Implications for optical properties of the lunar surface

Laboratory experiments show that albedoes as low as those on the moon can be produced by vacuum vitrification and associated chemical fractionation of ordinary terrestrial basaltic material. Vitrification is established as an unequivocal process that can account for the low albedo and apparent local darkening with age of the lunar surface. The spectral reflectance curves of glass powders are significantly different than those of the parent rock mineralogy; thus, the presence of ubiquitous glass in lunar surface material complicates compositional determinations by interpretation of spectral reflectance curves. Vitrification of rocks on the moon may highly modify the chemical composition of the resulting glass; thus, glass fragments found in lunar fines cannot be assumed to represent bulk parent rock material. Progressive impact vitrification of lunar surface material throughout the moon's history may have led to a fine-grain, opaque, refractory-rich material we call 'ultimate glass.' This unidentified and, at this point, hypothetical component may exist in dark regolith material; if found, it may be a useful indicator of regolith maturity.

Nash, D. B.↗

Apollo 16 rocks - Classification and petrogenetic model

The Apollo 16 rocks include cataclastic anorthosites, two varieties of unequilibrated breccia, two varieties of partly to fully equilibrated breccia, and a sequence of partially melted breccias. The latter, which dominate the Apollo 16 collection, include glass, divitrified glass, mesostasis-olivine-plagioclase rock, mesostasis-rich basalt, basalt, and poikilitic rocks. All sequence members contain vesicles and relics of plagioclase, olivine, pink spinel, and lithic fragments. Their equilibrated matrices define a series from glass, to a plagioclase-olivine-mesostasis assemblage displaying spherulitic and skeletal shaped crystals, through a plagioclase-pyroxene-olivine assemblage displaying euhedral shaped crystals. Such data suggest that the sequence lithologies were derived from breccias or soils that were partially melted in an impact event.

Warner, J. L.↗

Petrology of Apollo 16 poikilitic rocks

The petrology of 13 poikilitic rocks returned by Apollo 16 is described, and the mechanisms which likely participated in their formation are explained. The specimens include 11 rake samples from stations 1, 4, and 13 and the two large rocks 60315 and 65015. The poikilitic rocks are proposed to form by crystallization of an impact generated partial melt with over 70% liquid. The protolith consists of gas bearing polymict breccias and/or soil.

Simonds, C. H.↗

Magnetic and Moessbauer studies of Apollo 16 rock chips 60315,51 and 62295,27

Analysis of the Moessbauer spectra of two Apollo 16 rocks showed that 60315,51 is much richer in iron metal and troilite, but poorer in olivine, than 62295,27. The values of magnetic parameters, derived from hysteresis loops at 175 and 300 K, indicate the high metal contents and the predominance of coarse multidomain grains in both rocks. These coexist with a superparamagnetic grain fraction in 60315 and with a small single-domain grain fraction in 62295. The high Fe(0)/Fe(2+) ratios, the nonlinear acquisition of laboratory thermoremanence, and the drastic changes in magnetic parameters upon heating support the proposed formation of both rocks from the lunar regolith, with incorporation of shocked meteoritic metal grains during high-temperature impact events and simultaneous acquisition of magnetic remanence. Values estimated for ancient lunar magnetic fields by comparing the natural remanence with laboratory thermoremanence acquired in fields of 0.05 and 0.5 Oe, range from 0.01 to more than 1 Oe.

Brecher, A.↗