SEARCH · Engineering Papers

Results for “Process engineering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

All sources NASA NTRS DOE OSTI

DOE OSTI2020

Laminar-to-turbulent flame transition and cycle-to-cycle variations in large eddy simulation of spark-ignition engines

This paper investigates the effect of laminar-to-turbulent flame transition modeling on the prediction of cycle-to-cycle variations (CCVs) in large eddy simulation (LES) of spark-ignition (SI) engines. A laminar-to-turbulent flame transition model that describes the non-equilibrium sub-filter flame speed evolution during an early stage of flame kernel growth is developed. In the present model, the flame transition is characterized by the flame kernel size at which the flame transition ends, defined here as the flame transition scale. The proposed model captures the effects that variations in a turbulent flow field have on the evolution of early-stage burning rates, through variations in the flame transition scale. The proposed flame transition model is combined with the front propagation formulation (FPF) method and a spark-ignition model to predict CCVs in a gasoline direct injection SI engine. It is found that multi-cycle LES with the proposed flame transition model reproduces experimentally-observed CCVs satisfactorily. When the transition model is not considered or when variations in the transition process are neglected, CCVs are significantly under-predicted for the case considered here. These results indicate the importance of modeling the laminar-to-turbulent flame transition and the effect of turbulence on the transition process, when predicting CCVs, under certain engine conditions. The LES results are also used to analyze sources for variations in the flame transition. It is found, for the present engine case, that the most important source is the cycle-to-cycle variation in the turbulence dissipation rate, which is used to measure the strength of turbulence in the proposed model, near a spark plug. The large-scale velocity field and the variations of the laminar flame speed due to the mixture composition and thermal stratification are also found to be important factors to contribute to the variations in the flame transition.

42 ENGINEERING↗

DOE OSTI2023

Development and evaluation of a skeletal mechanism for EHN additized gasoline mixtures in large Eddy simulations of HCCI combustion

Advanced Low Temperature Combustion modes, such as the Sandia proposed Additive-Mixing Fuel Injection (AMFI), can unlock significant potential to boost fuel conversion efficiency and ultimately improve the energy conversion of internal combustion engines. This is a novel improved combustion process that is enabled by supplying small (<5%) variable amounts of autoignition improver to the fuel to enhance the engine operation and control. Common, diesel-fuel ignition-quality enhancing additive, 2-ethylexyl nitrate (EHN), is doped into gasoline to enable Sandia LTGC + AMFI combustion. This manuscript focuses on the development of a reduced sub-mechanism for EHN chemical kinetics at engine relevant conditions that is implemented into a skeletal mechanism for chemical kinetic studies of gasoline surrogate fuels. The mechanism validation utilized zero-dimensional numerical simulations and comparison to shock tube ignition-delay data of pure and EHN-doped n-heptane. Additional validation is presented with Homogeneous Charge Compression-Ignition (HCCI) engine data of pure and EHN-doped research-grade E10 gasoline. Then, the mechanism was deployed in a 3-D computational fluid dynamics (CFD) using Large Eddy Simulations (LES) to model the HCCI engine experiments of 0.4% vol EHN additized E10 gasoline at several equivalence ratios. Simulations showed a very good performance of the mechanism, and the model accurately reproduced (a) the ignition point, (b) combustion phasing, (c) combustion duration, and (d) the peak of the heat release rates of the engine experiments. The results show that EHN promotes Low-Temperature Heat Release, ultimately driving the gasoline to autoignite at thermodynamic conditions where the fuel would not otherwise ignite. Overall, this work demonstrates a viable reduced chemical-kinetic mechanism for EHN and shows that it can be combined with a skeletal gasoline mechanism for CFD-LES analysis of well-mixed LTGC that matches well with experimental results. The CFD-LES analysis also shows the spatial distribution of EHN-fuel interactions that control the autoignition throughout the combustion chamber.

Guleria, Gaurav↗

DOE OSTI2024

Engineering whiting events in culture: A microalgae-driven calcium carbonate and biomass production process at high pH and alkalinity with the marine microalga Nannochloropsis oceanica IMET1

Not provided.

09 BIOMASS FUELS↗

DOE OSTI2025

Emergent properties of magnons coupled to microwave photons (Final Technical Report)

Studying the emergent properties of hybrid quantum material platforms holds great promise for advancing quantum technologies and transforming our ability to control quantum mechanical interactions. A key development in recent years is the recognition that magnons – the elementary quanta of spin waves – can serve as fundamental building blocks in quantum systems. Understanding the mechanisms behind the generation and control of hybrid quasiparticles based on magnons could pave the way for engineering new materials for quantum coherent processing and quantum computing. This research project focused on the precise control of light-matter interactions in magnetic hybrid systems and nanostructures, where light is carried by microwave photons and matter by magnons in engineered magnetic metamaterials. Furthermore, we investigated hybridized magnon interactions in magnetic nanostructures and devices. To this end, the project has developed new measurement techniques and systematically studied novel material systems for efficient magnon-photon coupling. A key focus was uncovering the fundamental mechanisms governing magnon-photon and magnon-phonon interactions – critical for utilizing magnons as coherent information transducers between carriers. Specifically, this research addressed: 1. Investigate the dispersion and collective properties of magnon hybrid systems in new material systems. 2. Develop magnonic hybrids with non-zero wavevectors and achieve effective control of magnon-polariton properties through engineered magnonic behaviors. 3. Determine how spin-orbit torques interact with electromagnetic fields in the strong coupling regime. This work generated new insights into the physics of magnonic hybrid systems and their emergent properties by broadening the range of material platforms and measurement techniques used to study magnon-photon and magnon-magnon coupling. The findings deepen our understanding of magnon-polaritons and lay the groundwork for novel spintronic devices with potential applications in quantum information science.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2023

Towards a Standard Process Management Infrastructure for Workflows Using Python

Orchestrating the execution of ensembles of processes lies at the core of scientific workflow engines on large scale parallel platforms. This is usually handled using platform-specific command line tools, with limited process management control and potential strain on system resources. The PMIx standard provides a uniform interface to system resources. The low level C implementation of PMIx has hampered its use in workflow engines, leading to the development of Python binding that has yet to gain traction. In this paper, we present our work to harden the PMIx Python client, demonstrating its usability using a prototype Python driver to orchestrate the execution of an ensemble of processes. We present experimental results using the prototype on the Summit supercomputer at Oak Ridge National Laboratory. This work lays the foundation for wider adoption of PMIx for workflow engines, and encourages wider support of more PMIx functionality in vendor provided system software stacks.

Elwasif, Wael↗

DOE OSTI2023

Highly Flexible Dielectric Films from Solution Processable Covalent Organic Frameworks**

Abstract Covalent organic frameworks (COFs) are known to be a promising class of materials for a wide range of applications, yet their poor solution processability limits their utility in many areas. Here we report a pore engineering method using hydrophilic side chains to improve the processability of hydrazone and β‐ketoenamine‐linked COFs and the production of flexible, crystalline films. Mechanical measurements of the free‐standing COF films of COF‐PEO‐3 (hydrazone‐linked) and TFP‐PEO‐3 (β‐ketoenamine‐linked), revealed a Young's modulus of 391.7 MPa and 1034.7 MPa, respectively. The solubility and excellent mechanical properties enabled the use of these COFs in dielectric devices. Specifically, the TFP‐PEO‐3 film‐based dielectric capacitors display simultaneously high dielectric constant and breakdown strength, resulting in a discharged energy density of 11.22 J cm −3 . This work offers a general approach for producing solution processable COFs and mechanically flexible COF‐based films, which hold great potential for use in energy storage and flexible electronics applications.

Senarathna, Milinda C.↗

DOE OSTI2023

Highly Flexible Dielectric Films from Solution Processable Covalent Organic Frameworks**

Covalent organic frameworks (COFs) are known to be a promising class of materials for a wide range of applications, yet their poor solution processability limits their utility in many areas. Here we report a pore engineering method using hydrophilic side chains to improve the processability of hydrazone and β-ketoenamine-linked COFs and the production of flexible, crystalline films. Further, mechanical measurements of the free-standing COF films of COF-PEO-3 (hydrazone-linked) and TFP-PEO-3 (β-ketoenamine-linked), revealed a Young's modulus of 391.7 MPa and 1034.7 MPa, respectively. The solubility and excellent mechanical properties enabled the use of these COFs in dielectric devices. Specifically, the TFP-PEO-3 film-based dielectric capacitors display simultaneously high dielectric constant and breakdown strength, resulting in a discharged energy density of 11.22 J cm -3 . This work offers a general approach for producing solution processable COFs and mechanically flexible COF-based films, which hold great potential for use in energy storage and flexible electronics applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

High-Energy and High-Power NMP-Free, Designer NMC 811 Cathodes with Ultra-Thick Architectures Processed by Electrophoretic Deposition

This project focused on electrode engineering and reducing the weight of inactive components in the battery cells. Additionally, the project focused on optimizing the ‘electrophoretic deposition’ technique developed by PPG industries for aqueous processing of electrodes. During this project team has screened several binders suitable for electrophoretic deposition of electrodes. Additionally, we developed a nice strategy to deposit a low cost and scalable oxide coating on the surface of cathode materials. ORNL team performed the research under this CRADA at DOE’s Battery Manufacturing Facility (BMF) at ORNL.

99 GENERAL AND MISCELLANEOUS↗

DOE OSTI2025

High-Energy and High-Power NMP-Free, Designer NMC 811 Cathodes with Ultra-Thick Architectures Processed by Electrophoretic Deposition

25 ENERGY STORAGE↗

DOE OSTI2023

High-Fidelity Energy Deposition Ignition Model Coupled with Flame Propagation Models at Engine-like Flow Conditions

With the heightened pressure on car manufacturers to increase the efficiency and reduce the carbon emissions of their fleets, more challenging engine operation has become a viable option. Highly dilute, boosted, and stratified charge, among others, promise engine efficiency gains and emissions reductions. At such demanding engine conditions, the spark-ignition process is a key factor for the flame initiation propagation and the combustion event. From a computational standpoint, there exist multiple spark-ignition models that perform well under conventional conditions but are not truly predictive under strenuous engine operation modes, where the underlying physics needs to be expanded. In this paper, a hybrid Lagrangian-Eulerian spark-ignition (LESI) model is coupled with different turbulence models, grid sizes, and combustion models. The ignition model, previously developed, relies on coupling Eulerian energy deposition with a Lagrangian particle evolution of the spark channel, at every time-step. The spark channel is attached to the electrodes and allowed to elongate at a speed derived from the flow velocity. The LESI model is used to simulate spark ignition in a nonquiescent crossflow environment at engine-like conditions, using converge commercial computational fluid dynamics (CFD) solver. The results highlight the consistency, robustness, and versatility of the model in a range of engine-like setups, from typical with Reynolds-averaged Navier-Stokes (RANS) and a larger grid size to high fidelity with large-eddy simulation (LES) and a finer grid size. The flame kernel growth is then evaluated against Schlieren images from an optical constant volume ignition chamber with a focus on the performance of flame propagation models, such as G-equation and thickened flame model, versus the baseline well-stirred reactor model. Finally, future development details are discussed.

Advanced ignition modeling↗

DOE OSTI2022

Data for Coprocessing Corn Germ Meal for Oil Recovery and Ethanol Production, a Process Model for Lipid-Producing Energy Crops

Efforts to engineer high-productivity crops to accumulate oils in their vegetative tissue present the possibility of expanding biodiesel production. However, processing the new crops for lipid recovery and ethanol production from cell wall saccharides is challenging and expensive. In a previous study using corn germ meal as a model substrate, we reported that liquid hot water (LHW) pretreatment enriched the lipid concentration by 2.2 to 4.2 fold. This study investigated combining oil recovery with ethanol production by extracting oil following LHW and simultaneous saccharification and co-fermentation (SSCF) of the biomass. Corn germ meal was again used to model the oil-bearing energy crops. Pretreated germ meal hydrolysate or solids (160 °C and 180 °C for 10 minutes) were fermented, and lipids were extracted from both the spent fermentation whole broth and fermentation solids, which were recovered by centrifugation and convective drying. Lipid contents in spent fermentation solids increased 3.7 to 5.7 fold compared to the beginning germ meal. The highest lipid yield achieved after fermentation was 36.0 mg lipid g−1 raw biomass; the maximum relative amount of triacylglycerol (TAG) was 50.9% of extracted oil. Although the fermentation step increased the lipid concentration of the recovered solids, it did not improve the lipid yields of pretreated biomass and detrimentally affected oil compositions by increasing the relative concentrations of free fatty acids.

Conversion↗

DOE OSTI2022

Coprocessing Corn Germ Meal for Oil Recovery and Ethanol Production: A Process Model for Lipid-Producing Energy Crops

Efforts to engineer high-productivity crops to accumulate oils in their vegetative tissue present the possibility of expanding biodiesel production. However, processing the new crops for lipid recovery and ethanol production from cell wall saccharides is challenging and expensive. In a previous study using corn germ meal as a model substrate, we reported that liquid hot water (LHW) pretreatment enriched the lipid concentration by 2.2 to 4.2 fold. This study investigated combining oil recovery with ethanol production by extracting oil following LHW and simultaneous saccharification and co-fermentation (SSCF) of the biomass. Corn germ meal was again used to model the oil-bearing energy crops. Pretreated germ meal hydrolysate or solids (160 and 180 °C for 10 min) were fermented, and lipids were extracted from both the spent fermentation whole broth and fermentation solids, which were recovered by centrifugation and convective drying. Lipid contents in spent fermentation solids increased 3.7 to 5.7 fold compared to the beginning germ meal. The highest lipid yield achieved after fermentation was 36.0 mg lipid g−1 raw biomass; the maximum relative amount of triacylglycerol (TAG) was 50.9% of extracted oil. Although the fermentation step increased the lipid concentration of the recovered solids, it did not improve the lipid yields of pretreated biomass and detrimentally affected oil compositions by increasing the relative concentrations of free fatty acids.

09 BIOMASS FUELS↗

DOE OSTI2021

Collapsar R-process Yields Can Reproduce [Eu/Fe] Abundance Scatter in Metal-poor Stars

It is unclear if neutron star mergers can explain the observed r-process abundances of metal-poor stars. Collapsars, defined here as rotating massive stars whose collapse results in a rapidly accreting disk around a black hole that can launch jets, are a promising alternative. We find that we can produce a self-consistent model in which a population of collapsars with stochastic europium yields synthesizes all of the r-process material in metal-poor ([Fe/H] < - 2.5) stars. Our model reproduces the observed scatter and evolution of scatter of [Eu/Fe] abundances. We find that if collapsars are the dominant r-process site for metal-poor stars, r-process synthesis may be linked to supernovae that produce long γ-ray bursts. Our results also allow for the possibility that core-collapse supernovae beyond those that launch γ-ray bursts also produce r-process material (e.g., potentially a subset of Type Ic-BL supernovae). Furthermore, we identify collapsar jet properties (isotropic energy, engine luminosity, or engine time) that may trace r-process yield and verify that the amount of r-process yield produced per collapsar in our model ( ~ 0.07M⊙) is consistent with other independent estimates. In the future, achieving 0.05 dex precision on distribution scatter or a reliable selection function would further constrain our probe of r-process production. Our model would also hold for another prompt r-process site with a power-law yield, and work is needed to determine if, for example, fast-merging neutron stars can also explain abundance scatter.

Astronomy & Astrophysics↗

DOE OSTI2021

Latent map Gaussian processes for mixed variable metamodeling

Gaussian processes (GPs) are ubiquitously used in sciences and engineering as metamodels. Standard GPs, however, can only handle numerical or quantitative variables. Here we introduce latent map Gaussian processes (LMGPs) that inherit the attractive properties of GPs and are also applicable to mixed data which have both quantitative and qualitative inputs. The core idea behind LMGPs is to learn a continuous, low-dimensional latent space or manifold which encodes all qualitative inputs. To learn this manifold, we first assign a unique prior vector representation to each combination of qualitative inputs. We then use a low-rank linear map to project these priors on a manifold that characterizes the posterior representations. As the posteriors are quantitative, they can be directly used in any standard correlation function such as the Gaussian or Matern. Hence, the optimal map and the corresponding manifold, along with other hyperparameters of the correlation function, can be systematically learned via maximum likelihood estimation. Through a wide range of analytic and real-world examples, we demonstrate the advantages of LMGPs over state-of-the-art methods in terms of accuracy and versatility. In particular, we show that LMGPs can handle variable-length inputs, have an explainable neural network interpretation, and provide insights into how qualitative inputs affect the response or interact with each other. We also employ LMGPs in Bayesian optimization and illustrate that they can discover optimal compound compositions more efficiently than conventional methods that convert compositions to qualitative variables via manual featurization.

42 ENGINEERING↗

DOE OSTI2024

Reaction engineering: a lost (and found) art for a decarbonized future [Slides]

The heart (or, perhaps more appropriately, the stomach) of any chemical manufacturing process is the reactor, where chemical and physical transformations occur under precisely controlled conditions. For traditional industrial processes, the design, optimization and operation of chemical reactors are extremely well developed, drawing upon the principles of chemistry, physics, calculus and economics. However, new-age process concepts proposing to use "exotic" reactors and/or sustainable inputs (e.g., renewable carbon resources, electrons, photons, plasma) face a dearth of well documented reaction engineering principles & design practices that eclipses their rapid adoption. This presentation features two vignettes of (the return of) reaction engineering in sustainable process science, first in the valorization of lignin from biomass, and second in understanding multimodal catalyst deactivation in industrial-scale reactors within the Catofin process for propane dehydrogenation. Overall, this seminar seeks to educate student researchers on practical means of advancing laboratory reactor technologies towards commercial practice.

09 BIOMASS FUELS↗

DOE OSTI2020

On assurance testing for repairable systems

In this work, we consider assurance testing for repairable systems when supplementary information is available in addition to the data collected in the assurance test. The supplementary information is incorporated using a Bayesian inferential framework. Assurance testing is considered for both a homogeneous Poisson process and a nonhomogenous Poisson process and is illustrated with examples.

42 ENGINEERING↗

DOE OSTI2020

Disposal Concepts for a High-Temperature Repository in Shale.

Disposal of large, heat-generating waste packages containing the equivalent of 21 pressurized water reactor (PWR) assemblies or more is among the disposal concepts under investigation for a future repository for spent nuclear fuel (SNF) in the United States. Without a long (>200 years) surface storage period, disposal of 21-PWR or larger waste packages (especially if they contain high-burnup fuel) would result in in-drift and near-field temperatures considerably higher than considered in previous generic reference cases that assume either 4-PWR or 12-PWR waste packages (Jové Colón et al. 2014; Mariner et al. 2015; 2017). Sevougian et al. (2019c) identified high-temperature process understanding as a key research and development (R&D) area for the Spent Fuel and Waste Science and Technology (SFWST) Campaign. A two-day workshop in February 2020 brought together campaign scientists with expertise in geology, geochemistry, geomechanics, engineered barriers, waste forms, and corrosion processes to begin integrated development of a high-temperature reference case for disposal of SNF in a mined repository in a shale host rock. Building on the progress made in the workshop, the study team further explored the concepts and processes needed to form the basis for a high-temperature shale repository reference case. The results are described in this report and summarized..

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2021

Solid Phase Gradient Alloying Method via ShAPE

Alloying has been used to confer desirable properties to various metallic systems since the bronze age. For example, Ni, Mn, and Cr are alloyed into an Fe matrix to make steel, which has improved strength and corrosion resistance (as displayed in Fig. 1). In addition to the type of alloying elements, the amount of alloying elements added into a matrix is also very critical for a material’s mechanical property, physical property, machinability, and cost. Conventionally, new alloys are discovered by combining alloy precursors and elemental constituents into a mixture and melting them together. The solidified product or ingot represents a usually non-homogeneous combination of the chemistry with a microstructure dictated by the physics of solidification. It is time and energy intensive to optimize the alloying amounts via the casting process and hence, economically not conducive to rapid alloy discovery. In addition, the cast microstructure seen in the as-cast ingot is often not the ideal, nor even desired structure for optimized performance. Cast materials often need further processing such as homogenization, annealing, and deformation work put in through rolling, forging, extruding, etc. to have favorable microstructures and properties. A faster method to discover new alloy combinations and evaluate them in their worked or processed form is needed. Recently, Laser Engineered Net Shaping was applied to fabricate gradient compositional material for alloy designing. However, the mechanical properties of this gradient alloy were poor due to the existence of impurities, oxidation and cracks that are inherent in the melt-solidification process. Because of these limitations, we propose to use a solid-phase process (ShAPE) to create bulk materials (extrudates) that vary in composition from one end of the extruded solid to the other. Various manufacturing methods for alloy design including conventional casting method, laser based combinatorial method and current solid phase gradient alloying method are displayed and compared in Fig. 2. ShAPE machine and a schematic of ShAPE process are displayed in Fig. 3. Starting material is processed by a rotating and plunging die to form an extrudate. We are proposing through this methodology to invent a new, bulk-scale combinatorial technique. With this novel technique, alloying element can be dissolved into the matrix with a continued gradient without bulk melting. Formation of inter-metallics and defects originating from melt processing can be avoided. In addition, the ShAPE process creates the mixed alloy chemistry, and meanwhile subjects the material to severe plastic strain, which induces the favorable “worked” microstructure. Products from the ShAPE process can be tested in hardness directly providing a path to rapid evaluation of mechanical properties. The ability to create graded structures using friction stir processing (FSP) has been demonstrated, however using the ShAPE process we believe will lead to much faster and higher fidelity results. When combined with high throughput screening methods of physical, mechanical and microstructural property characterization, efficiency and accuracy of alloy design can be significantly improved.

36 MATERIALS SCIENCE↗